Manuale d’uso / di manutenzione del prodotto SUPREME-I30 del fabbricante Heat & Glo LifeStyle
Vai alla pagina of 48
1 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Models: GRAND-I35 GRAND-I35-SP SUPREME-I30 SUPREME-I30-SP • DO NOT store or use gasoline or other fl am- mable vapors and liquids in the vicinity of this or any other appliance.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 2 Listing Label Information/Location Model Name: ___________________________________________ Dat.
3 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury . • W ARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury .
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 4 B. Limited Lifetime W arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc.
5 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 B. Limited Lifetime W arranty (continued) 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS:.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 6 C. BTU Speci fi cations MODELS: Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP LABORA TOR Y : Underwriters Laboratories, Inc. (UL) TYPE: V ented Gas Fireplace Heater STANDARD: ANSI Z21.
7 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 2 2 Operat ing Instruc tions Figure 2.1 General Operating Parts B. Y our Fireplace W ARNING! DO NOT operate fi replace before read- ing and understanding operating instructions.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 8 C. Clear Space W ARNING! DO NOT place combustible objects in front of the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.
9 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 I. Before Lighting Fireplace Before operating this fi replace for the fi rst time, have a quali fi ed technician : • V erify all shipping materials have been removed from inside and/or underneath the fi rebox.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 10 J. Lighting Instructions (IPI) The IPI system may be operated with four AA-cell batteries. When using batteries, unplug the transformer . T o prolong battery life, remove them when using the transformer .
11 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Lighting Instructions - Standing Pilot Ignition 1. Turn of f all electric power to the appliance if ser- vice is to be performed. 2. Open control access panel.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 12 Initial Break-in Procedure • The appliance should be run three to four hours continuously on high. • T urn the appliance off and allow it to completely cool.
13 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Glass Cleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface. CAUTION! Handle fi xed glass assembly with care.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 14 B. Maintenance T asks-Service T echnician The following tasks must be performed by a quali fi ed technician.
15 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Figure 3.1 Standing Pilot Flame Patterns Burner Ignition and Operation Frequency: Annually By.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 16 A. T ypical Appliance System NOTICE: Illustrations and photos re fl ect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale.
17 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 B. Design and Installation Considerations Heat & Glo gas inserts are designed for install.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 18 5 5 F ireplace Si ze Re quirement s Figure 5.1 Fireplace Opening In addition to these dimensions, also reference Clearances and Mantel Projections (Section 5.
19 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 B. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as speci fi ed.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 20 A. V ent T ermination Minimum Clearances Roof Pitch H (Min.) Ft. Flat to 6/12...........................................................1.0* Over 6/12 to 7/12 .
21 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 7 7 Installation Preparation Prepare the existing solid fuel masonry or factory built non-combustible fi rebox for installation.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 22 B. V enting Components CAUTION! Risk of Cuts/Abrasions/Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp.
23 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Figure 8.2 CUT AND BEND FLASHING AS NEEDED TO FIT CHIMNEY SEALANT ADHESIVE • T rim chimney top plate to minimize excess overhang or bend over fl ue tile (see Figure 8.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 24 F . Installing Adaptor and T ermination Cap For installation of termination cap see minimum vent heights for various pitched roofs (see Figure 8.
25 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 A. Fuel Conversion • Make sure the appliance is compatible with available gas types.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 26 B. Standing Pilot Ignition System Wiring • The standing pilot ignition system wiring DOES NOT require a 120 V AC supply to operate.
27 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Figure 10.2 IPI Wiring Diagram BLK RED BA TTERY P ACK 6V DC GROUND BROWN GREEN (MAIN) ROCKER .
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 28 Figure 10.4 Fan Wiring Diagram BLOWERS BLOWER RECEPT ACLE BLK GRN BLK BLK GRN BLK WHT GRN BLK.
29 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Figure 10.5 Wiring Diagram - Fan with RC200/RC300 Remote PLUG 120V EXISTING OUTLET GRN (2) BL.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 30 1 1 11 Finishing A. Mantel and W all Projections W ARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as speci fi ed.
31 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 A. Remove Glass Assembly See Section 12.H. B. Remove the Shipping Materials Remove shipping materials from inside or underneath the fi rebox. C.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 32 G. Install the Log Assembly Log Set Assembly: LOGS-I35 Models: GRAND-I35, GRAND-I35-SP CAUTION: Logs are fragile, handle with care. Figure 1. Log Set Installed Figure 2.
33 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Log #3 (SRV2205-705) : Position the log groove with the 2nd grate tine from the right. Rotate the right end of the log clockwise until the end of the log contacts the grate bar .
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 34 2205-935B Figure 1 1. Log #6 Figure 12. Log #7 LOG #6 RESTING ON LOG #6 RESTING ON FLA T SPOTS FLA T SPOTS LOG #7 RESTING ON LOG #7 RESTING ON FLA T SPOTS FLA T SPOTS Log #6 (SRV2205-706): Position Log #6 as shown in Figure 1 1.
35 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 G. Install the Log Assembly Log Set Assembly: LOGS-I30 Models: Supreme-I30, Supreme-I30-SP , Supreme-I30AU CAUTION: Logs are fragile, handle with care.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 36 2206-935B Log #3 (SRV2206-702) : Position Log #3 as shown in Figure 5. Position the grate tine groove, located on the bottom of the log, over the base of the left grate tine.
37 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 I. Air Shutter Setting Air shutter settings should be adjusted by a quali fi ed ser- vice technician at the time of installation. The air shutter is set at the factory for minimum vertical vent run.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 38 A. Standing Pilot Ignition System 1 3 13 T roubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service.
39 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 T roubleshooting (continued) Symptom Possible Cause Corrective Action 3. (Continued) C. V alve. T urn the valve knob to the ON position. Place the ON/ OFF switch in the ON position.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 40 B. IntelliFire Plus™ Ignition System Symptom Possible Cause Corrective Action 1. Pilot won’t light. The ignitor/module makes noise, but no spark.
41 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 1 4 14 Reference Materials A. Appliance Dimension Diagram Dimensions are actual appliance dimensions.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 42 Figure 14.2 Direct V ent Flex Liner Kits Figure 14.3 Direct V ent Flex Liner Accessory Kits Direct V ent Flex Liner Accessory Kits (see Figure 14.
43 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 C. Service Parts GRAND-I35, GRAND-I35-SP Beginning Manufacturing Date: June 2010 Ending Manufacturing Date: ______ 35” Metal Insert IMPORT ANT : THIS IS DA TED INFORMA TION.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 44 IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number .
45 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 Service Parts GRAND-I35, SUPREME-I30 Beginning Manufacturing Date: June 2010 Ending Manufacturing Date: ______ #19 IPI V alve Assembly 19.1 19.2 19.
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 46 Service Parts GRAND-I35-SP , SUPREME-I30-SP Beginning Manufacturing Date:June 2010 Ending Manufacturing Date: ______ #19 Standing Pilot V alve Assembly 19.
47 Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 C. Service Parts List GRAND-I35, GRAND-I35-SP IMPORT ANT : THIS IS DA TED INFORMA TION. When requesting service or replacement parts for your appliance please provide model number and serial number .
Heat & Glo • Grand-I35, Grand-I35-SP , Supreme-I30, Supreme-I30-SP • 2206-900 Rev . K • 6/1 1 48 Heat & Glo, a brand of Hearth & Home T echnologies Inc. 7571 215 th Street West, Lakeville, MN 55044 www .heatnglo.com D. Contact Information Please contact your Heat & Glo dealer with any questions or concerns.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Heat & Glo LifeStyle SUPREME-I30 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Heat & Glo LifeStyle SUPREME-I30 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Heat & Glo LifeStyle SUPREME-I30 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Heat & Glo LifeStyle SUPREME-I30 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Heat & Glo LifeStyle SUPREME-I30, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Heat & Glo LifeStyle SUPREME-I30.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Heat & Glo LifeStyle SUPREME-I30. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Heat & Glo LifeStyle SUPREME-I30 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
