Manuale d’uso / di manutenzione del prodotto 8000CL-IPI-S del fabbricante Heat & Glo LifeStyle
Vai alla pagina of 82
1 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 • DO NOT store or use gasoline or othe r am- mab le va por s a nd li qui ds in th e v ici ni ty of thi s or any other appliance. • Whattodoifyousmellgas - DO NOT try to light any appliance.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 2 ListingLabelInformation/Location Model Name: ___________________________________________.
3 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 Safety AlertKey: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury .
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 4 = Contains updated information. 13Finishing A. Mantel and Wall Projections . . . . . . . . . . . . . . . . . . . . . . . 53 B . F a c i n g M a t e r i a l .
5 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 B. LimitedLifetimeW arranty 4021-645C 12-29-10 Page 1 of 2 Hearth & Home T echnologies Inc. LIMITED LIFETIME W ARRANTY Hearth & Home T echnologies Inc.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 6 4021-645C 12-29-10 Page 2 of 2 W ARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor .
7 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 C. BTUSpecications MODELS: 6000CL-IPI,6000CL-IPILP , 8000CL-IPI,8000CL-IPILP LABORATORY: UnderwritersLaboratories,Inc.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 8 H. Requirements for the Commonwealth of Massachusetts For all side wall hori.
9 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 Figure2.1GeneralOperatingParts B. Y ourFireplace W ARNING! DO NOT operate replace before read - ing and understanding operating instructions.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 10 D. ClearSpace W ARNING! DO NOT place combustible objects in front of the replace or block louvers. High temperatures may start a re.
1 1 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 J. BeforeLightingFireplace Before operating this replace for the rst time, have a qualiedservicetechnician : • V erify all shipping materials have been removed from inside and/or underneath the rebox.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 12 K. LightingInstructions(IPI) 1. This appliance is equipped with an ignition device which automatically lights the burner. DO NOT try to light the burner by hand.
13 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • T urn the replace off and allow it to completely cool.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 14 GlassCleaning Frequency: Seasonally By: Homeowner T ools Needed : Protective gloves, glass cleaner , drop cloth and a stable work surface.
15 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 B. MaintenanceT asks-QualiedService T echnician The following tasks must be performed by a qualied ser- vice technician.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 16 Figure3.3SideRefractoryRemoval C. Refractory ,GrateandV alveAssembly Removal It may become necessary to remove the refractory , grate and valve assemblies.
17 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 BASE REFRACTOR Y Figure3.6V alveAssemblyRemoval Note: The base refractory must be removed to access screws. Figure3.5BaseRefractoryRemoval D.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 18 A. T ypical ApplianceSystem NOTICE: Illustrations and photos reect typical installations and are for design purposes only . Illustrations/diagrams are not drawn to scale.
19 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 B. DesignandInstallationConsiderations Heat & Glo direct vent gas appliances are designed to operate with all combustion air siphoned from outside of the building and all exhaust gases expelled to the outside.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 20 5 F ramingandC learances A. Selecting ApplianceLocation Whe n sel ect ing a loca tio n for the appli anc e it is impo rta nt to con sid er th e r eq uir ed cle ar anc es to wa lls ( see Fi gur e 5.
21 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 B. Constructingthe ApplianceChase A chase is a vertical box-like structure built to enclose the gas appliance and/or its vent system.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 22 D. MantelandW allProjections W AR NI NG! Ri sk of Fi re ! Com ply wi t h al l min imu m cle ar - an ces a s spe ci ed.
23 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 A. V entT erminationMinimumClearances RoofPitch H(Min.)Ft. Flat to 6/12.................................................
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 24 Figure6.3 MinimumClearancesforT ermination O N P R Q X = AIRSUPPL YINLET A = 12 inches.................clear ance s ab ove gra de, v eranda, por ch, de ck or bal cony B = 12 inches.
25 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 A. ApprovedPipe This appliance is approved for use with Hearth & Home T echnologies DVP or SLP venting systems. Refer to Sec- tion 16B for vent component information.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 26 H 1 V 1 Figure7.3 T opV ent-HorizontalT ermination T opV ent-Horizont.
27 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 INST ALLED HORIZONT ALL Y H 1 H 2 V 1 Figure7.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 28 Figure7.5 T opV ent-HorizontalT ermination-(continued) ThreeElbows H 2 H 1 V 2 V 1 V 1 Min. H 1 Max. V 2 Min.
29 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 FLUE RESTRICTOR TOP REFRACTOR Y T opV ent-V erticalT ermination NoElbow Figure7.6 Note: If installing a vertical vent/ termination of f the top of the appli- ance, the ue restrictor should be used.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 30 H 1 V 1 V 2 T opV ent-V erticalT ermination(continued) Figure7.1 1 T woElbows Figure7.10 4. Center the Flue Restrictor on vent and secure in place by using two self-tapping screws (see Figure 7.
31 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 Figure7.12 T opV ent-V erticalT ermination-(continued) ThreeElbows IN STALLE D HO R IZO NTALL Y H 1 H 2 V 1 V 2 V 1 H 1 +H 2 V 2 V 1 + V 2 Minimum H 1 +H 2 Maximum Elbow only 1 ft.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 32 RearV ent-HorizontalT ermination Figure7.14 NoElbow One45ºElbow H 1 H 1 =16in.(406mm)Maximum Do not use a 45º elbow in corner installations.
33 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 RearV ent-HorizontalT ermination-(continued) T woElbows Figure7.15 H 1 Maximum V 1 Minimum H 2 H 1 +H 2 Maximum 1 ft.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 34 Figure7.16 ThreeElbows 6000CL H 1 Maximum V 1 Minimum H 2 +H 3 H 1 +H 2 +H 3 Max. 1 ft. 305 mm Back to Back 90º Elbows 1 ft.
35 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 RearV ent-V erticalT ermination OneElbow Figure7.17 T woElbows Figure7.18 V 1 Minimum H 1 Maximum 6 in. 152 mm 2 ft.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 36 RearV ent-V erticalT ermination-(continued) ThreeElbows Figure7.19 ThreeElbows Figure7.20 H 1 H 2 H 3 V 1 Minimum H 1 +H 2 +H 3 Maximum * * * 8 ft.
37 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 A* B* 10 in. 12 in. C D 10 in. 12 in. A. PipeClearancestoCombustibles W ARNING! Risk of Fire! Maintain air space clearance to vent.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 38 C. InstalltheCeilingFirestop A ceilin g restop MUST be used between oors and attics. • DVPpipeonly - Frame an opening 10 in.
39 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 D. Install AtticInsulationShield W ARNING! Fire Risk. DO NOT allow loose materials or insulation to touch vent. Hearth & Home T echnologies Inc.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 40 9 AppliancePreparation CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation.
41 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 B. RearV ent CAUTION! Risk of Cuts, Abrasions or Flying Debris. Wear protective gloves and safety glasses during instal- lation. Sheet metal edges are sharp.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 42 Figure9.14ProperPositioningandSecuringofan Appliance NAILING TABS (BOTH SIDES) PILOT HOLES Figure9.12Non-combustibleBoard C.
43 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 1 0 Inst allingV entP ipe(D VPandSLPP ipe ) A.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 44 B. AssembleV entSections(SLPPipeOnly) T o attach the rst vent component to the starting collars of the appliance: • Attach a DVP-2SL or DVP-SLP24 adapter to the starting collar of the appliance.
45 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 120º Figure10.8SecuringV erticalPipeSections 120º Figure10.9SecuringHorizontalPipeSections E. Di sas se mb le V en t Se ct ion s • Rotate either section (see Figure 10.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 46 F . Install Decorative Ceiling Components (SLPonly) A decorative ceiling thimble can be installed on a at ceil- ing through which the vent passes.
47 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 G. InstallMetalRoofFlashing • See minimum vent heights for various pitched roofs (Figure 10.14) to determine the length of pipe to extend through the roof.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 48 SCREWS CAULK STORM COLLAR (1of3) Figure10.
49 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 Figure10.20V entingthroughthewall INTERIOR HEA T SHIELD OR EXTENDED HEA T SHIELD W ALL SHIELD FIRESTOP HEA T SHIELD 1-1/2 IN. (38 MM) MIN.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 50 A. FuelConversion • Mak e sure the appli ance is compat ible with availab le gas types. • Conversions must be made by a qualified service technician using Hearth & Home T echnologies specied and approved parts.
51 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 A. WiringRequirements NOTICE: This appliance must be electrically wired and grounded in.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 52 F . WallSwitchInstallationforFan(Optional) If the box is being wired to a wall mounted switch for use with a fan (See Figure 12.
53 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 1 3 F inishing A. MantelandW allProjections W AR NI NG! Ri sk of Fi re ! Co mp ly w it h all mi nim um cl ear - an ces as sp ec ie d.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 54 Figure13.4FinishingMaterial1InchThickorLess DOOR FIT FINISHMA TERIAL THICKNESS SEE FIGURE Folio Inside Any 13.6 Arcadia Overlap 1 inch or less 13.
55 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 DOOR FINISHING MA TERIAL FINISHING MA TERIAL C (Includes 1/8 in. opening each side of door) A (Outside door width) Finishing material thickness, 1-4 inches maximum B = T op of door to bottom of replace.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 56 RemovalofFinishingStrips Figure13.7RemovingFinishingStrips. 31-7/8 IN. (6000) 33-1 1/16 IN. (8000) 3-3/4 IN. (6000, 8000) 35-5/16 IN.
57 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 D. ElevatedHearthSystems Use the table below to identify the hearth system that will be used. The table will also help identify effects on the various dimensions.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 58 A. RemoveFixedGlass Assembly See Section 14.I. B. RemovetheShippingMaterials Remove shipping materials from inside or underneath the rebox.
59 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 Step2.RightRefractoryPanelInstallation The right refractory panel has a rectangular notch on the bottom side. 3. Place the right refractory panel against the right side- wall of the rebox.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 60 G. EmberPlacement W ARNIN G! Risk of Expl osi on! Fol low embe r pla ce men t ins tru ct ion s in manu al. DO NOT compl et ely block burne r por ts wit h embe r mater ia l.
61 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 H. InstalltheLog Assembly LogAssembly:LOGS-6CL Models:6000CL-IPI-S,6000CL-IPILP-S, 6000CL-IPI-T ,6000CL-IPILP-T CAUTION: Logs are fragile, handle with care.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 62 Figure1 1 6 5 7 2 3 1 4 Figure7 2 3 1 Log #3(SRV2164-703) : Mate the slot located on the bottom of Log #3 with the right log placement tab on top of Log #1.
63 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 LogAssembly:LOGS-8CL Models:8000CL-IPI-S,8000CL-IPILP-S, 8000CL-IPI-T ,8000CL-IPILP-T Figure3 Figure4 GROOVES SLOTS Figure5 Figure6 1 2 1 LEFTGRA TETINE CAUTION: LOGS ARE FRAGILE, HANDLE WITH CARE.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 64 Figure1 1 1 2 3 4 5 6 7 Figure7 2 3 1 1 2 3 4 Figure8 Figure9 Figure10 1 1 2 2 3 3 4 5 5 6 4 Log #3(SRV2168-703) : Mate the slot located on the bottom of Log #3 with the right log placement tab on top of Log #1.
65 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 Figure14.5 AirShutter Figure14.4FixedGlass Assembly I. FixedGlass Assembly W ARNING! Risk of Asphyxiation! Handle xed glass assembly with care.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 66 1 5 T ro ubleshooting With proper installation, operation, and maintenance your gas appliance will provide years of trouble-free service.
67 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 T roubleshooting(continued) Symptom PossibleCause Corrective Action 4. Pilot lights but contin- ues to spark, and main burner will not ignite.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 68 1 6 ReferenceMater ials A. ApplianceDimensionDiagram Di men si on s a re a ct ua l a pp li anc e di men si on s. Us e for r ef ere nc e onl y .
69 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 Figure16.2 ApplianceDimensions-8000Models Location Inche.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 70 B. V entComponentsDiagrams Figure16.
71 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 DVP-HPC1 DVP-HPC2 DVP-TRAP1 DVP-TRAP2 DVP-HPCK1-B DVP-HPCK2-B DVP-TRAPK2 DVP-TRAPK1 DVP-TRAP Horizontal T ermination Cap 15-1/8 in. (384 mm) 12 in.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 72 13-1/4 in. (337 mm) 24-5/8 in. (625 mm) 27-1/2 in. (699 mm) RF6M Roof Flashing Multi-pak 31 in. (787 mm) 24-5/8 in. (625 mm) 13-1/4 in. (337 mm) RF12M Roof Flashing Multi-pak BEK Trap Ca p Brick Extension 13-3/4 in.
73 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 DVP-TB1 BasementVent Cap 12 in. (305 mm) 1-1/2 in. (38 mm) 7-3/8 in. (187 mm) 14 in. (356 mm) 17-3/4 in. (451 mm) 7-1/4 in. 12 in. 305 mm (184 mm) 5-1/4 in.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 74 B. V entComponentsDiagrams (continued) DVP-HRC-SS DVP-HRC-ZC-SS HORIZONT ALTERMINA TIONCAP 13 in. (330 mm) 15 in. (381 mm) 8-1/8 in.
75 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 B. V entComponentsDiagrams (continued) Figure16.8SLPSeriesV entComponents 8-3/4 in. 222 mm 6-1/2 in.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 76 B. V entComponentsDiagrams (continued) Figure16.9SLPSeriesV entComponents SLP-WT -BK W all Thimble-Black 26 in.
77 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 Figure16.10SLPSeriesV entComponents B. V entComponentsDiagrams (continued) 13 in. 330 mm 13 in. 330 mm 1-5/16 in.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 78 ServiceParts BeginningManufacturingDate: Aug2009 EndingManufacturingDate: Active IMPORT ANT : THIS IS DA TED INFORMA TION.
79 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 ServiceParts BeginningManufacturingDate: Aug2009 EndingManufacturingDate: Active 8000CL-IPI-T ,8000CL-IPI-S IMPORT ANT : THIS IS DA TED INFORMA TION.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 80 ServiceParts BeginningManufacturingDate: Aug2009 EndingManufacturingDate: Active 18.1 18.2 18.10 18.3 18.4 18.8 18.7 18.
81 Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 ServiceParts BeginningManufacturingDate: Aug2009 EndingManufacturingDate: Active IMPORT ANT : THIS IS DA TED INFORMA TION.
Heat & Glo • 6000CL-IPI-S, 6000CL-IPI-T , 8000CL-IPI-S 8000CL-IPI-T • 2165-900 Rev . S • 9/12 82 D. ContactInformation Please contact your Heat & Glo dealer with any questions or concerns. For the location of your nearest Heat & Glo dealer , please visit www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Heat & Glo LifeStyle 8000CL-IPI-S è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Heat & Glo LifeStyle 8000CL-IPI-S - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Heat & Glo LifeStyle 8000CL-IPI-S imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Heat & Glo LifeStyle 8000CL-IPI-S ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Heat & Glo LifeStyle 8000CL-IPI-S, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Heat & Glo LifeStyle 8000CL-IPI-S.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Heat & Glo LifeStyle 8000CL-IPI-S. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Heat & Glo LifeStyle 8000CL-IPI-S insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
