Manuale d’uso / di manutenzione del prodotto PACIFIC HYDROSTRAR 97005 del fabbricante Harbor Freight Tools
Vai alla pagina of 27
GASOLINE PRESSURE W ASHER 13 HP - 4,000 PSI Model 97005 SET UP , OPERA TING, AND SERVICING INSTRUCTIONS Using an engine indoors CAN KILL YOU IN MINUTES. Engine exhaust contains carbon monoxide. This is a poison you cannot see or smell. NEVER use inside a home or garage, EVEN IF doors and windows are open.
Page 2 SKU 97005 For technical questions, please call 1-800-444-3353. T ABLE OF CONTENTS Important Safety Information.....................................................................3 Set-Up Precautions.............................................
Page 3 SKU 97005 For technical questions, please call 1-800-444-3353. SA VE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly , operating, inspection, maintenance and cleaning procedures.
Page 4 SKU 97005 For technical questions, please call 1-800-444-3353. SET UP PRECAUTIONS Gasoline fuel and fumes are 1. ammable, and potentially explosive. Use proper fuel storage and handling procedures. Do not store fuel or other ammable materials nearby .
Page 5 SKU 97005 For technical questions, please call 1-800-444-3353. necessary when near the engine’s magneto or recoil starter . Use only accessories that are 6. recommended by Harbor Freight T ools for your model. Accessories that may be suitable for one piece of equipment may become hazardous when used on another piece of equipment.
Page 6 SKU 97005 For technical questions, please call 1-800-444-3353. equipment for a purpose for which it is not intended. Never operate the Pressure W asher 22. using a pulsing action. Pulsing is the repeated and rapid ON and OFF operation of the T rigger .
Page 7 SKU 97005 For technical questions, please call 1-800-444-3353. Maintain labels and nameplates on 5. the equipment. These carry impor- tant information. If unreadable or missing, contact Harbor Freight T ools for a replacement. Have the equipment serviced by a 6.
Page 8 SKU 97005 For technical questions, please call 1-800-444-3353. UNP ACKING When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight T ools at 1-800-444-3353 as soon as possible.
Page 9 SKU 97005 For technical questions, please call 1-800-444-3353. OUTLET CONNECTOR (55) DETERGENT HOSE HOSE (8) INLET CONNECTOR (59) HOSE (8) SPRA Y GUN (6) NOZZLE (9) FIGURE C 4. Attach the Hose (8) to the Spray Gun (6). Connect the other end of the Hose to the Outlet Connector (55).
Page 10 SKU 97005 For technical questions, please call 1-800-444-3353. Starting the Engine Inspect engine and equipment looking for damaged, loose, and missing parts before set up and starting. If any problems are found, do not use equipment until xed properly .
Page 1 1 SKU 97005 For technical questions, please call 1-800-444-3353. Mix fuel stabilizer (not included) with 3. 89 octane (or better) unleaded gaso- line according to fuel stabilizer direc- tions. Fill the Fuel T ank (101) to about 1 4. inch under the lip of the gasoline tank with the stabilized unleaded gasoline mixture.
Page 12 SKU 97005 For technical questions, please call 1-800-444-3353. Then, turn the engine Choke (41) to 3. its “CHOKE” position. Set the Choke in the “RUN” position when starting a warm engine. (See Figure E.) Grasp the Starter Handle (1), and pull 4.
Page 13 SKU 97005 For technical questions, please call 1-800-444-3353. 15° Nozzle (colored yellow): 3. This Nozzle delivers a powerful 15 degree spray pattern for intense cleaning of small areas. This Nozzle should only be used on areas that can withstand the high pressure from this Nozzle.
Page 14 SKU 97005 For technical questions, please call 1-800-444-3353. If damage or discoloration is noted from the detergent, do not use the detergent when cleaning. First, pass over the area with a light 2. cleaning. Then clean the area more thoroughly .
Page 15 SKU 97005 For technical questions, please call 1-800-444-3353. TECHNICAL SPECIFICA TIONS Engine T ype 13 HP / OHV Recoil Start Air Cooled 3600 RPM Displacement 390cc Rotation viewed from PTO (power takeoff - the output shaft) Counterclockwise (Facing the Shaft) Fuel T ype 89+ octane unleaded gasoline Capacity 1.
Page 16 SKU 97005 For technical questions, please call 1-800-444-3353. FIGURE K DRAIN PLUG (14) 2. Remove the Drain Plug (14) and, if possible, tilt the Crankcase slightly to help drain the oil out. Recycle used oil. Replace the Drain Plug (14) and 3.
Page 17 SKU 97005 For technical questions, please call 1-800-444-3353. emery paper . If the white insulator is cracked or chipped, the spark plug needs to be replaced. When installing a new spark plug, ad- 4. just the plug’s gap to the specication on the T echnical specication chart.
Page 18 SKU 97005 For technical questions, please call 1-800-444-3353. TROUBLESHOOTING Problem Possible Causes Probable Solutions Engine will not start FUEL RELA TED: No fuel in tank or fuel valve closed. 1. Choke not in start position, 2. especially with cold engine.
Page 19 SKU 97005 For technical questions, please call 1-800-444-3353. TROUBLESHOOTING Problem Possible Causes Probable Solutions Engine misres Spark plug wire loose. 1. Incorrect spark plug gap or 2. damaged spark plug. Defective spark plug wire. 3.
Page 20 SKU 97005 For technical questions, please call 1-800-444-3353. PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS LIST AND ASSEMBL Y DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
Page 21 SKU 97005 For technical questions, please call 1-800-444-3353. PUMP ASSEMBL Y DIAGRAM 28 27 3 4 1 2 5 6 4 26 1 2 7 8 9 10 11 12 13 4 3 14 15 16 17 18 19 20 21 22 23 24 10 25 44 45 46 47 48 49 .
Page 22 SKU 97005 For technical questions, please call 1-800-444-3353. Part Description Qty . 1 Starter Handle 1 2 Flange Bolt (M6 x 8) 3 3 Engine Switch 1 4 Fan Cover 1 5 Flange Bolt (M6 x 12) 12 6 Shroud 1 7 Starter Pulley 1 8 Cooling Fan 1 9 Flange Nut (M16) 1 10 Wire Harness Clip 1 11 Flywheel 1 12 Oil Seal (35 x 52 x 8) 2 13 Crank Case Assy .
Page 23 SKU 97005 For technical questions, please call 1-800-444-3353. Part Description Qty . 77 Exhaust Pipe Gasket 1 78 Exhaust Pipe 1 79 Mufer Stay 1 80 Spark Arrester 1 81 Mufer 1 82 Mufe.
Page 24 SKU 97005 For technical questions, please call 1-800-444-3353. ENGINE ASSEMBL Y DIAGRAM.
Page 25 SKU 97005 For technical questions, please call 1-800-444-3353. FRAME, LANCE, HOSE, WHEEL P ARTS LIST & ASSEMBL Y DIAGRAM LANCE, HOSE, WHEEL P ARTS LIST Part Description Qty .
Page 26 SKU 97005 For technical questions, please call 1-800-444-3353. 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability stand.
Page 27 SKU 97005 For technical questions, please call 1-800-444-3353. 4. Coverage Exclusions W arranty claims shall be filed in accordance with the provisions of the HFT warranty policy explained in the box at the top of the previous page.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Harbor Freight Tools PACIFIC HYDROSTRAR 97005 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Harbor Freight Tools PACIFIC HYDROSTRAR 97005 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Harbor Freight Tools PACIFIC HYDROSTRAR 97005 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Harbor Freight Tools PACIFIC HYDROSTRAR 97005 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Harbor Freight Tools PACIFIC HYDROSTRAR 97005, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Harbor Freight Tools PACIFIC HYDROSTRAR 97005.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Harbor Freight Tools PACIFIC HYDROSTRAR 97005. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Harbor Freight Tools PACIFIC HYDROSTRAR 97005 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
