Manuale d’uso / di manutenzione del prodotto 98751 del fabbricante Harbor Freight Tools
Vai alla pagina of 18
3-IN-1 AIR FRAMING NAILER 98751 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2008 by Harbor Freight T ools ® .
SKU 98751 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 3 tool. Distractions are able to result in the loss of control of the tool. Personal safety a. Stay alert. Watch what you are do- ing and use common sense when operating the tool. Do not use the tool while tired or under the inu - ence of drugs, alcohol, or medica- tion.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 4 cleat nails or staples into surfaces too hard to penetrate. Do not drive cleat nails or staples on top of other cleat nails or staples, or at too steep an angle. Cleat nails and staples can ricochet, causing personal injury .
SKU 98751 For technical questions, please call 1-800-444-3353. Page 5 the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range. b. Never use oxygen, carbon dioxide, combustible gases or any bottled gas as an air source for the tool.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 6 particles. (California Health & Safety Code § 25249.5, et seq. ) 3. T ake caution, as some woods contain preservatives such as copper chro- mium arsenate (CCA) which can be toxic.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 7 FUNCTIONAL DESCRIPTION Specications Air Pressure Range 70-120 PSI Maximum Air Pressure 120 PSI Air Inlet 1/4” -18 NPT Nail T ype / Length .
SKU 98751 For technical questions, please call 1-800-444-3353. Page 8 Description Function A Air Hose Connects air to tool B Filter Prevents dirt and condensation from damaging tool or work piece C Re.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 9 Description Function A Vibration Pads For noise and vibration reduction B Anchor Bolts Secures air compressor in place C Ball V al.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 10 an air valve that will allow the air tool to retain pressure and operate accidentally after the air supply is disconnected. Note: Air ow , and therefore tool perfor - mance, can be hindered by under- sized air supply components.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 1 1 3. Safety Nosepiece (42) Magazine (79) T rigger (59) Air Coupler (95) Figure 1 The Nailer should not re if Safety Nosepiece (42) is not depressed against the workpiece. 4. Make sure T rigger (59) and Safety Nosepiece (42) move freely , with- out sticking.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 12 of nails into the Magazine behind the few remaining nails and the Nailer will be ready for further use. Operating Nailer Set proper angle of the Nailer for your application (a three step process): Failure to properly adjust the nailer can result in tool failure or damage.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 13 3. T o re, place the Safety Nosepiece of the Nailer on the workpiece. The Nailer should not re if the Safety Nosepiece is not depressed. Once depressed, quickly squeeze the T rigger once.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 14 force . Keep your ngers clear when releasing. 5. If you are unable to clear the nail jam using the method prescribed above, the tool should be taken to a qualied service technician for proper servicing.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 15 T roubleshooting Problem Possible Causes Likely Solutions Air leaking in Cylinder Cap (8). 1. Loose Screw (6). 2. Gasket (9) is cracked or worn. 1. T ighten and recheck. 2. Replace Gasket.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 16 P ARTS LIST Part Description Quantity 1 Screw 1 2 Spring W asher 3 3 Bushing 1 4 Exhaust Cover 1 5 Seal 1 6 Screw 3 7 Spring W asher 2 8A Cylinder Cap 1 9A O-Ring sealing 3 10 W asher 3 11 V alve Seat 1 12 Spring 2 13 O-Ring (M57.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 17 REV 10a 28 29 30 31 32 33 34 35 36 37 38 39 40 39 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 54 57 58 59 60 61 68 67 39 69 6.
SKU 98751 For technical questions, please call 1-800-444-3353. Page 18 Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. REV 10a 3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 9301 1 • (800) 444-3353 90 Day W arranty Harbor Freight T ools Co.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Harbor Freight Tools 98751 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Harbor Freight Tools 98751 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Harbor Freight Tools 98751 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Harbor Freight Tools 98751 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Harbor Freight Tools 98751, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Harbor Freight Tools 98751.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Harbor Freight Tools 98751. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Harbor Freight Tools 98751 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
