Manuale d’uso / di manutenzione del prodotto 93762 del fabbricante Harbor Freight Tools
Vai alla pagina of 29
HORIZONT AL/VERTICAL MET AL CUTTING BANDSA W Model 93762 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 2 CONTENTS IMPORT ANT SAFETY INFORMA TION ........................... 3 GENERAL T OOL SAFETY W ARNINGS ..................................... 3 BAND SA W SAFETY W ARNINGS .... 5 VIBRA TION SAFETY .
SKU 93762 For technical questions, please call 1-800-444-3353. Page 3 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 4 DON’T FORCE TOOL. It will do the 7. job better and safer at the rate for which it was designed. USE RIGHT TOOL. Don’t force tool 8. or attachment to do a job for which it was not designed.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 5 or other part that is damaged should be properly repaired or replaced. DIRECTION OF FEED. Feed work 20. into a blade or cutter against the direction of rotation of the blade or cutter only .
SKU 93762 For technical questions, please call 1-800-444-3353. Page 6 Keep all safety guards in place and in 19. proper working order . Use indoors only . 20. If the teeth of the Saw Blade are so 21. far apart that they straddle the work- piece, severe damage to the work- piece and/or Saw Blade will result.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 7 ditions and situations that may occur . It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator .
SKU 93762 For technical questions, please call 1-800-444-3353. Page 8 Improper connection of the equip- 3. ment-grounding conductor can re- sult in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equip- ment-grounding conductor .
SKU 93762 For technical questions, please call 1-800-444-3353. Page 9 SPECIFICA TIONS Motor 120 V~ / 60 Hz / 1 HP / n 0 1700/min Cutting Capacity 4-1/2” Round Stock / 4” x 6” Rectangular Stock S.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 10 T o Attach The Bandsaw T o The Stand: ST AND (TOP VIEW) MOUNTING HOLE MOUNTING HOLE MOUNTING HOLE MOUNTING HOLE MOUNTING HOLE MOUNTING HOLE SCREW (59) SPRING W ASHER (58) FLA T W ASHER (57) FIGURE B 1.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 1 1 T o Attach The Pulley Cover: PULLEY COVER (72) WORM SHAFT (9) MOTOR SHAFT (81) BODY FRAME (60) HEX BOL T (76) FLA T WASHER (77) FIGURE D Position the Pulley Cover (72) over the Worm Shaft (9) and Motor Shaft (81).
SKU 93762 For technical questions, please call 1-800-444-3353. Page 12 MA TERIAL SPEED (FPM) PULLEY GROOVE SPINDLE MOTOR T ool Steel, Stainless Alloy Steels, Bearing Bronze 80 Large Small Medium to Hi.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 13 SCREW (190) SMALL VERTICAL CUTTING PLA TE (194) FIGURE I SCREW (190) VERTICAL CUTTING PLA TE (189) 2. Remove the two Screws (190), and remove the Small V ertical Cutting Plate (194).
SKU 93762 For technical questions, please call 1-800-444-3353. Page 14 OPERA TING INSTRUCTIONS CAUTION! T urn the Power Switch (164) to its “OFF” position and un- plug the tool from its electrical outlet prior to making adjustments to the tool. T o Use The Vise: Raise the Body Frame (60) to its 1.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 15 Adjustments T o Adjust The Stock Stop: SHAFT (158) SOCKET HEAD SCREW (156) STOCK STOP (157) WORKPIECE (NOT INCLUDED) FIGURE M 1. Loosen the Socket Head Screw (156) that holds the Stock Stop (157) to the Shaft (158).
SKU 93762 For technical questions, please call 1-800-444-3353. Page 16 ing the Locking Pin (153). (See Figure H.) T urn on the Bandsaw . The Saw 2. Blade (82) is tracking properly when the back of the Blade is just touch- ing the edge of the Blade Wheel (37) ange.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 17 When the Bandsaw is not in use over 2. long periods of time, release the ten- sion on the Saw Blade (82).
SKU 93762 For technical questions, please call 1-800-444-3353. Page 18 Basic Bandsaw Operation -- V ertical Position: 1. W ARNING! Always wear ANSI- approved safety impact eye goggles when operating the Bandsaw .
SKU 93762 For technical questions, please call 1-800-444-3353. Page 19 from its electrical outlet. (See Figure S.) W ait until the Saw Blade (82) comes 15. to a complete stop. Then, remove the workpiece and scrap material from the V ertical Cutting Plate (189).
SKU 93762 For technical questions, please call 1-800-444-3353. Page 20 Blade into the workpiece. (See Fig- ure T .) 10. W ARNING! Keep hands and ngers safely away from the cut - ting area. Slowly lower the Body Frame (60), 1 1. while it gradually feeds the Saw Blade (82) into the workpiece.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 21 INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Make sure the Power Switch (164) is in its “OFF” position and the tool is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 22 Place the new Saw Blade (82) be- e. tween each of the Guide assemblies and around the Upper Blade Wheel (37) and Lower Blade Wheel (54). IMPORT ANT : The teeth must be pointing downward toward the Motor .
SKU 93762 For technical questions, please call 1-800-444-3353. Page 23 T o lubricate the Worm Gear and 5. Worm Shaft: The W orm Gear (17) and Gear Shaft (19) run in an oil bath Gear Box and should not.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 24 TROUBLESHOOTING.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 25 P ARTS LIST Part # Description Qty 1 Spindle Pulley 1 2 Socket Head Screw(M8x8) 1 3 Screw(M4x8) 1 4 Flat W asher(4) 1 5 Flat W as.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 26 P ARTS LIST (CONT .) Part # Description Qty 80 Motor Pulley 1 81 Key(C5x28) 1 82 Motor 1 83 Blade 1 84 Blade Guide Bracket Seat 1.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 27 Part # Description Qty 163 Shaft 1 164 Cable Protector 1 165 Switch Panel 1 165-1 Switch Box 1 166 Screw(M3.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 28 ASSEMBL Y DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts. 194: V ertical Cutting Plate Support Not Shown.
SKU 93762 For technical questions, please call 1-800-444-3353. Page 29 LIMITED 1 YEAR / 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Harbor Freight Tools 93762 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Harbor Freight Tools 93762 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Harbor Freight Tools 93762 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Harbor Freight Tools 93762 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Harbor Freight Tools 93762, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Harbor Freight Tools 93762.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Harbor Freight Tools 93762. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Harbor Freight Tools 93762 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
