Manuale d’uso / di manutenzione del prodotto 2810BXX1 del fabbricante Hans Grohe
Vai alla pagina of 16
Raindance Allrounder 28110XX1 W all Outlet Adapter with Hose Connection 28108XX1 Installation Instructions / W arranty.
2 Raindance Allrounder 28110XX1 T echnical Data Max. flow rate of showerhead 2.5 gpm Determining the mounting height (X) The Allrounder should be mounted according to the preferences of the users.
3 Install the Allrounder with the Optional W all Outlet Adapter with Hose Connection 28108XX1 Roughing in If you are not using the 28108XX1 wall outlet adapter , go to page 9 . Install a properly anchored 1/2" NPT drop-eared ell, at least 2" behind the surface of the finished wall.
4 Installation W rap both ends of the brass nipple with T eflon tape. Screw it into the mounting piece. Screw the test nipple / mounting piece assembly into the drop-eared ell. T ighten with a 12 mm Allen wrench (not included). Position the mounting plate over the mounting piece.
5 Drill the holes with a 6 mm bit. Use extreme caution - do not drill into the water line. Install the anchors. Remove the long bottom mounting screw on the All- rounder . Replace with the shor ter screw included with the adapter . Seal the wall around the anchors with waterproof sealant.
6 Slide the handshower into the handshower holder . Guide the hose over the hose hook. Install the handshower Place a black rubber washer in one end of the hose. Screw this end to the wall outlet adapter . Place the screen washer in the other end of the hose.
7 Replacement Parts 28108001 1 check valve 94074000 2 screw 97598000 Check V alve Maintenance: Backflow preven- tion is provided by a check valve, which is integral to the wall outlet adapter .
8 Corner Mount Kit 28105XX0 Note: The corner mount kit is not for use with the 28108XX1 wall outlet adapter . Position the corner mount against the wall at the desired location. Mark the positions of the screw holes. Put the mount aside. Drill the holes using a 6 mm bit.
9 Install the 28110XX1 Allrounder Do not drill through the mounting plate. Put the mounting plate away in a safe location. Drill the holes, using a 6 mm bit. Place the mounting plate against the wall at the de- sired location. Mark the locations of the screw holes.
10 Place the Allrounder over the mounting bracket (1). T ighten the set screw (2). Install the handshower: Place a black rubber washer in one end of the hose. Connect this end of the hose to the wall outlet (not included). Place the screen washer in the other end of the hose.
11 Slide the handshower into the holder , until the holder grips it firmly . Guide the hose over the hose hook. Using the Allrounder T o adjust the handshower height: Pull or push the Allrounder to the desired position. T urn the knob to the front to make the Allrounder easier to move.
12 Change the spray modes Push the function lever until it is next to the name of the desired function. The Raindance has 3 spray modes. Limescale Removal The spray channels on the Raindance are protected by the Rubit!™ self-cleaning system.
13 Replacement parts 28110XX1 1 handshower 28518XX1 2 T echniflex hose 28276XX3 3 mounting plate 97609XX0 4 corner mount kit 28105000 (optional - not for use with wall outlet adapter) XX = color 00 = .
14 Limited Lifetime Consumer W arranty This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.
15 the product for use primarily for any other purpose, including, without limitation, a commercial purpose, this warranty extends only (i) for 1 year , with respect to Hansgrohe and Commercial products, and (ii) for 5 years, with respect to AXOR products.
Hansgrohe, Inc. • 1490 Bluegrass Lakes Parkway • Alpharetta, GA 30004 T el. 770-360-9880 • Fax 770-360-9887 www .hansgrohe-usa.com US - Installation Instructions • Part No.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Hans Grohe 2810BXX1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Hans Grohe 2810BXX1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Hans Grohe 2810BXX1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Hans Grohe 2810BXX1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Hans Grohe 2810BXX1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Hans Grohe 2810BXX1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Hans Grohe 2810BXX1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Hans Grohe 2810BXX1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
