Manuale d’uso / di manutenzione del prodotto ST59-23A1 del fabbricante HANNspree
Vai alla pagina of 88
NTSCTVTWEN1203 MAC-001 150 User's Manual 23" Liquid Cr ystal Display T ele vision ST59-23A1 2F , No.362, Rueiguang Rd., Neihu District, T aipei City 1 14, T aiwan, R.
Table of Contents 1 1. Warranty and Service .................................................... 4 2. Preface .................................................................... ..... 5 3. Description of Warning Symbols ..............................
Table of Contents 2 Using the Flashcard Feature .................................... 4 0 Starting Flashcard ............................................... 4 0 Remote Control Keys ....................................... ... 4 1 Viewing Photos ........
Table of Contents 3 TV Settings ............................. ................................ 6 5 TV/CATV .......................................... .................. 6 6 MTS ....... ............................................................ 6 7 Auto Scan .
4 The instructions on this manual are for the model(s) listed on the front cover . Before you st art reading, check your product number by looking at the rear of your TV .
5 This manual is designed to assist us ers in setting up and using the LCD TV . Information in this document has been carefully checked for accu- racy; however , no guarantee is given to the correctness of the contents . The information in this document is subject to chang e without notice.
6 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused.
7 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connects to ground; do not r emove it.
8 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual ca refully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future reference. Keep the box and packaging in case th e product needs to be shipped in the future.
9 Optimal V iewing Dist ance 250 cm.
10 Import ant Safety Inst ructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near wa ter . Clean only with a dr y cloth. Do not block any ventilation openings. Install in accordance with the manuf acturer ’s instr uctions.
11 Protect the power cord from being walked on or pinched, particularly at the plug, convenience receptacles, and the point wh ere they exit from the app aratus. Use only with a cart, stand, tripod, bracket, or table spe cified by the manufacturer , or sold with the appar atus.
12 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into a power outlet or extension cable. Dangerous high-volt age electric power compo- nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing.
13 Installation T o avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna as far away as possi- ble from power transmissi on lines to avoid possi- ble danger .
14 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric sho ck or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly .
15 FCC Compliance S t atement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may n ot cause harm- ful interference, and ( 2) this devi ce must accept any interference received, including inter ference that may cause undesired operation.
16 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limit s for radio noise emissions from digital app aratus as set out in the Rad io Interference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B.
17 Thank you for purchasing this Liquid Crystal Display TV. Y our TV is designed to be safe, versatile, and easy to use. It s sleek, yet sturdy design makes it a de corative addition to your living room.
18 F eatures • 23-inch color TFT LCD TV • Safe, sturdy const ruction • Built-i n dual TV tuner • Audio/video suppo rt: – S tereo audio input s – Composite video inputs – Component video input – S-Video inputs – 3.
19 Checking Package Contents Make sure the following component s are included in the box. Co ntact your vendor immediately if any thing is missing or damaged.
20 Getting to Know Y our TV F r ont View Contr ols Description Function 1 Menu T urns the on-screen display (OSD) menus on and o ff. In PC mode, both the green and red L ED are illuminated, indicating sleep st atus. 2 Select channel Changes the channel.
21 3 Infrared sensor Point the remote contr ol towards the sensor to operate the TV . 4 Power button and LED T urns the TV on and of f. The green LED indicates power on. 5 Adjust volume Press the + button to increase the volume. Press the – button to de crease the volume.
22 F r ont View Por ts Description Function 1 AV 4 Use the A V4 input to connect an external device, such as a VCR or a VCD/DVD player . Audio Input (L, R): white and r ed audio cables. Video Input (S-Video or Video): yellow (video) or S-V ideo cable.
23 R ear Panel Input and Output P or ts Description Function 1 DVI Connects to a PC’ s DVI port. 2 Line in Connects to a PC’s line/audio in port. 3 Line out Connects to external amplifier or speakers.
24 4 AV 1 Use the A V1 input to connect an external device, su ch as a VCR or a VCD /DVD player with a component outp ut. Audio Input (L, R): white and r ed audio cables. Video Input (Y , P B , P R ): video cables. 5 AV 2 Use the A V2 input to connect an external device, su ch as a VCR or a VCD /DVD player .
25 Getting S tarted Making Connections Open the back cover by pulling it towa rd you and lifting it upwa rds to get access to the input and output port s as shown: Getting Star ted 9.
26 Connecting to an Antenna or Cable TV 1 Connect one end of the VHF/UHF (Ante nna) or CA TV cabl e to the ANT Jack (VHF/UHF IN Jack) on the back of t he TV . 2 Connect the othe r end of the VHF/UHF (Ant enna) or CA TV cable to the Ante nna or CA TV socket.
27 Connecting to A V Devices Connect external devices such as VCD/DVD players or VCRs to the TV using the A V1, A V2, A V3, and A V4 ports on the back or front of the TV .
28 Connecting to a Video Camera using S-Video The following illustration shows you how to conn ect the TV to a camcorder using the A V2 S-video por t. Actual connections may var y according to the make and model o f the device. Refer to the user ’s manual included with the camcorder for more det ailed instructions.
29 Connecting to a VCR, VCD or DVD Player using Composite Vid eo The illustration presented here shows you ho w to connect your TV to a VCR, VCD or DVD player using the A V3 composite video port. Actual connections may vary according t o the make and model of your device.
30 Connecting Ear phones Y ou can use headphones to listen to the TV instead of using th e built- in speakers. Connect head phones to the headphon e line out port as illustrated.
31 Connecting an Amplifier or Speak ers Connect an external amplifier or speakers to the line out port to provide better sound quality . Refer to the following illustration.
32 Connecting to a PC Connect the TV to your PC to use it as the monitor using the DVI port as shown.Connect the DVI port of the TV to the DVI output of the PC. Connect the line out port of the PC to the line in port of your TV to listen to audio from the PC.
33 Inser ting a CF car d 1 Insert the CF card in the dir ection of t he arrow . 2 T o remove the CF card, press the butt on. the CF card pops out. Gently slide o ut the CF card.
34 Connecting the P ow er Adapter 1 Connect the power cord to the power adapter as illustr ated. 2 Plug the powe r adapter connect or into the DC-IN on the rear pane l of the TV . 3 Plug the three-pron ged plug at the other end of the power cord into a power ou tlet.
35 Using the TV Using the Remote Co ntr ol For best results, u se the remote control within a dist ance of 6 meters (20 feet) from the front of the TV’ s signal sensor . Do not exceed an angle of 30 degrees when point ing at the signal sensor . Refer to the following illustration.
36 T ur n ing the TV On and Of f 1 Press the POWER button on the remote control or on the TV control pane l. The power LED indicator on the front of the TV ch anges from red to green, indic ating that the power is on. 2 Press the POWER button ag ain. The power LED chang es from green to red, indicating that the TV is in standby (off) mode.
37 Adjusting the V olume 1 Press the VOL + button to increase t he volume. 2 Press the VOL – button to decrease the volume. 3 Press the AUTO/MUTE button. The word “MUTE” appears on the bottom right corner of the screen and sound i s turned off. 4 Press the AUTO / MUTE button again to restore the original volume.
38 Using PIP and POP The TV features Picture-in-Picture (PIP) and Picture-on-Picture, enabling you to view two sources at the same time. Follo w these instructions. 1 T urn on t he TV and select a source sign al. 2 Press the PIP bu tton on the remote contro l.
39 4 Press the POSITION button on the remote control to move the PIP window to one of the four corners of the screen as shown. 5 Press the PIP bu tton to switch t o picture outside picture (POP) mode. The two sign als are displayed side-by-si de. 6 Press the PIP button agai n.
40 Using the Flashcard Fea ture The Flashcard feature enables you to view p hotos, watch movies, and listen to MP3 files on CF cards inserted in the CF card slot (A V 5). The following describes the Flashcard feature . St arting Fl ashcard 1 Insert a CF card into the CF card slot (A V 5).
41 Remote Control Keys The following table lists the remote control buttons use d to operate the Flashcard feature. Button Flashcard Name Function Navigation (up/down left/right) — Press these buttons to navigate the Flashcard menus. In Picture mode, use these buttons to pan a picture when zoomed in.
42 Viewing Photos 1 Use the remote control navigation buttons t o select PHOTO. 2 Press the Enter butto n. A screen appears displaying thumbnails of images on the CF card. 3 Use the navig ation buttons t o select a thumbnail image. 4 Press the Enter butto n.
43 Rot ating Images Follow these instructions to rotate images wh en in Photo mode. 1 Put an image in f ull screen mode as d escribed in the previous section. 2 Press Caption on the remote contro l. The image is rotated 90 degre es (90°) in a clockwise dire ction.
44 Listening to Music 1 Use the remote control navigation button s to select MUSIC. 2 Press the Enter butto n. A screen appears displaying a list of the music stored on your CF card. 3 Use the naviga tion buttons to select a music file. The selected file start s playing.
45 W atching V ideos 1 Use the remote control navigation buttons to sele ct VIDEO. 2 Press the Enter butto n. A screen appears displaying thumbnails of the vid eos on your CF card. 3 Use the naviga tion buttons to select a video file. 4 Press Enter . The selected video file b egins playing.
46 Using the Setup Menu s From the Flashcard m a i n s c r e e n , press the Menu button to enter the SETUP MENU MAIN P AGE. Use the navigation buttons to select a menu item and press Enter to open the selected ite m. Select EXIT SETUP and press Enter to leave the setup menu.
47 Movie Setup Select MOVIE SETUP and press Enter to display t he movie setup menu. • Interval T ime: Use the navigation buttons to select INTERV AL TIME. Interval time mode has the following opt ions: – FA S T : sets an increased interval speed between playback.
48 Adjusting On-Screen Displ ay (OSD) Settings The On-Screen Display (OSD) menu system provides a quick a nd simple method to adjust your TV's settings. This chapter describes how to change each of the available settings. T he OSD menu can be accessed through either the front con trol panel or the remote control.
49 Picture Settings Notes: • Y ou can control the OSD with either the remote cont rol or the front pa ne l contr ol. • PC picture mode and TV picture mode have different menu items; PC picture mode incl udes a Backlight ad justment. Press MENU to enter the OSD Main Menu screen.
50 Brightness 1 Press the S or T button to select BRI GHTNESS. The slider bar s hows the current setting. 2 Press the + but ton to increase the brightness.
51 Contrast 1 Press the S or T button to select CONTRAST . The slider bar shows the current sett ing. 2 Press the + button to incre ase the contrast. 3 Press the – butt on to decrease the contrast.
52 Hue 1 Press the S or T button to select HUE . The slider bar shows the current setting. 2 Press the + button to increase the hue. 3 Press the – button to de crease the hue.
53 Saturation 1 Press the S or T button to select SA TURA TION . The slider bar shows the current setti ng. 2 Press the + butt on to increas e the saturation.
54 Sharpness 1 Press the S or T button to select SHARPNESS . The slider bar shows the c urrent setti ng. 2 Press the + button to increase the sharpness.
55 Backlight (PC mo de) 1 Press the S or T button to select BACKLIGHT . The slider bar shows the current setti ng. 2 Press the + button to incre ase the backlight intensity .
56 Black Level 1 Press the S or T button to select BLACK LEVEL . The slider bar shows the current setting. 2 Press the + button to incre ase the black level.
57 Color T emp 1 Press the S or T button to select COLOR TEMP . 2 Press the + or – button to change the color te mperature. The current setting is show n in brackets. The following options are available: • STD Color – for standard color settings.
58 Preset 1 Press the S or T button to select PRESET . 2 Press the + or – button. “ON” appears in the brackets. All picture settings are returned to the factory-set defaul t values .
59 Audio Settings Note: Y ou can control the OSD with either the remote control o r the front panel control. Press MENU to enter the OSD Main Menu screen.
60 Tr e b l e 1 Press the S or T button to select TREBLE . The slider bar shows the current setting. 2 Press the + button to increase the treble. 3 Press the – button to decre ase the treble.
61 Bass 1 Press the S or T button to select BASS . The slider bar shows the current setting. 2 Press the + button to increase the bass. 3 Press the – but ton to decrease the bass.
62 Balance BBE, T ruSu rround, and EALA 1 Press the S or T button to select BALANCE . The slider bar shows the current sett ing. 2 Press the + button to shif t the balance to the ri ght speaker . 3 Press the – button to shift the balance to the left speaker .
63 Earphone 1 Press the S or T button to select EARPHONE . The slider bar shows the current setti ng. 2 Press the + button to incre ase the earphone vo lume.
64 Preset 1 Press the S or T button to select PRESET . 2 Press the + or – button. “ON” appears in the bracke ts. All audio settings are re turned to the factory-set default values.
65 TV Settings Notes: • Operate the OS D with ei ther the remote control or the front panel con- trol. • The T V OSD menu is not available if the input source is not TV . Press MENU to enter the OSD Main Menu screen. 1 Press S or T to select TV . 2 Press + or – to enter the TV Menu.
66 TV/CA TV 1 Press the S or T button to select TV/CA TV . The current setting is shown in brackets. 2 Press the + button to select CA TV in order to receive cable TV signal s. 3 Press the – button to se lect TV in order to receive broadcast TV signals.
67 MTS 1 Press the S or T button to select MTS . The current setting is sh own in brackets. 2 Press the + or – button to select from the various MTS options: • MAIN – select the main audio signal. • SAP – select the secondar y audio signal • DUAL – enable both prima ry and secondary audio sig - nals.
68 Auto Scan 1 Press the S or T button to select AUTO SCAN . The current setting is shown in brackets. 2 Press the + button to enable auto scanning . “ON” is displayed in brackets and the TV start s scanning automatically for TV channels. TV MENU : CLOSE : SELECT : ADJUST TV MAIN OFF ADD TV / CA TV MTS AUTO SCAN CH .
69 Channel Add/Erase 1 Press the S or T button to select CH. ADD/ERASE . The current settin g is shown in brackets. 2 Press the + but ton to add the current channel. 3 Press the – button to delete the current channel. TV MENU : CLOSE : SELECT : ADJUST TV MAIN OFF ADD TV / CA TV MTS AUTO SCAN CH .
70 Favorite Ch annel 1 Press the S or T button to select F A V . CHANNEL . 2 Press the + or – button to enter the F A V . CHANNEL menu. 3 Press the S or T button to select a favorite channel number 1 ~ 4 . 4 Press the + or – button to choose a channel to assign to the favorite channel numb er you selected in step 3.
71 PC Settings Notes: • Operate the OS D with ei ther the remote control or the front panel con- trol. • The PC OSD menu is not available if the input source is not PC. Press MENU to enter the OSD Main Menu screen. 1 Press S or T to select P C. 2 Press + or – to enter the PC Menu.
72 Phase 1 Press the S or T button to select PHASE . The slider bar shows the current setti ng. 2 Press the + button to incre ase the phas e. 3 Press the – button to decrease the phas e. PC MENU : CLOSE : SELECT : ADJUST RETURN PHASE 15 CLOCK 50 V -POSITION 15 OFF AUTO ADJ .
73 Clock 1 Press the S or T button to select CL OCK . The slider bar shows the current setti ng. 2 Press the + button to incre ase the clock. 3 Press the – button to decrease the clock. PC MENU : CLOSE : SELECT : ADJUST RETURN PHASE 15 CLOCK 50 V -POSITION 15 OFF AUTO ADJ .
74 Auto Adjustment DOS Mode 1 Press the S or T button to select AUTO ADJUSTMENT . 2 Press the + button to enab le auto adjustme nt. The display is automatically configur ed for the attach ed computer ’s displa y properties . 1 Press the S or T button to select DOS MODE .
75 Horizontal Position 1 Press the S or T button to select H POSITION . The slider bar shows the current setti ng. 2 Press the + button to move the display to t he right. 3 Press the – butt on to move the display to the left. PC MENU : CLOSE : SELECT : ADJUST RETURN PHASE 15 CLOCK 50 V -POSITION 15 OFF AUTO ADJ .
76 V ertical Position 1 Press the S or T button to select V POSITION . The slider bar shows the current setti ng. 2 Press the + button to move the display upward. 3 Press the – butt on to move the display downward. PC MENU : CLOSE : SELECT : ADJUST RETURN PHASE 15 CLOCK 50 V -POSITION 15 OFF AUTO ADJ .
77 Miscellaneous Settings Note: Operate the OSD with either the remote con trol or the front panel control. Press MENU to enter the OSD Main Menu screen.
78 Wide Language 1 Press the S or T button to select WIDE . The current setting is shown in bracke ts. 2 Press the + or – bu tton to select the screen f ormat from the following: –1 6 : 9 –4 : 3 – Anamorphic 1 Press the S or T button to select LANGUAGE .
79 Sleeper The sleep timer turns the TV of f automatically after a set time. 1 Press the S or T button to select SLEEPER . The current setting i s shown in brackets.
80 Time This setting allows you to set the system time. 1 Press the S or T button to select TIME . 2 Press the + butt on to change the time. 3 Press the S or T button to select HOUR. Press the + or – button to increase or decrease the hour . 4 Press the S or T button to select MINUTE.
81 T aking Care of Y our TV T urn the power off b efore you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprint s from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid damaging the finish.
82 T roubleshooting Situation Solution No picture and sound. • Connect the power cord properly . • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through connected video sources. • Press the CHANNEL UP or CHANNEL D OWN buttons to switch to other TV stations.
83 No sound but have image. • Make sure the sour ce device is functioning properly . • Set the volume to a higher level. • Make sure the au dio cable is connected securely . • Turn the mute off. Screen image turns over . • Make sure the video signal cable is connected properly .
84 S pecifications ST59-23A1 LCD Panel Size 23-inch TFT Aspect Ratio 15:9 Display Resolution 1024 (horizontal) x 768 (vertical) TV System NTSC Video System A V 1: Component Video (RCA jack, YP B P R ).
85 PIP Operation Mode The following table shows which main sources are compatible with PIP and PO P sources. Main Source PIP Source POP Source AV 1 (YP B P R or YC B C R ) AV 2 — AV 3 — AV 4 — T.
86 Computer Compatib ility Char t The following table shows re solution and frequency values supported by the TV . Resolution Frequency Remarks 640 X 400 70 Hz — 720 X 400 70 Hz — 85 Hz — 640 X .
87 Aspect Ratio The ratio of width to height of a film, image or displ ay screen. BBE A proprietary audio enhancement technology . BBE compensates for distorti on common to loudspe akers. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast).
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HANNspree ST59-23A1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HANNspree ST59-23A1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HANNspree ST59-23A1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HANNspree ST59-23A1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HANNspree ST59-23A1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HANNspree ST59-23A1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HANNspree ST59-23A1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HANNspree ST59-23A1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
