Manuale d’uso / di manutenzione del prodotto K215-10A1 del fabbricante HANNspree
Vai alla pagina of 60
NTSCTVTWEN1203 MAC-001008 User's Manual 9.6" Liquid Cr ystal Display T ele vision K215-10A1 2F , No.362, Rueiguang Rd., Neihu District, T aipei City 1 14, T aiwan, R.
Table of Contents 1 1. Warranty and Service .................................................... 3 2. Preface .................................................................... ..... 4 3. Description of Warning Symbols ..............................
Table of Contents 2 11. Adjusting On-Screen Display (OSD) Settings ............ ... 3 0 Brightness ............................................................ ... 3 1 Contrast ............................................................... ... 3 2 Video Setting .
3 The instructions on this manual are for the model(s) listed on the front cover . Before you start readi ng, check your product number by looking at the rear of your TV .
4 This manual is designed to assist users in setting up and using the LCD TV . Information in this document has be en carefully checked for accuracy; however , no guarantee is given to the correctn ess of the contents. The information in this do cument is subject to change without notice.
5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused.
6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connect s to ground; do not r emove it.
7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual ca refully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future reference. Keep the box and packaging in case the pr oduct needs to be shipped in the future.
8 Optimal V iewing Area 102 cm 1 1 VO L.
9 Import ant Safety Instructio ns 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dr y cloth. 7. Do not block any ven t ilation openings.
10 10. Protect the power cord from being walked on or pinched particularly at th e plug, conve- nience receptacles, and the point where they exit from the app aratus. 1 1. U se only with a cart, stand, tripod, bracket, or table specified by the manufa cturer , or sold with the apparatus.
11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volt age electric power compo - nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing.
12 Installation T o avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna far from p ower trans- mission lines to av oid possible danger .
13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric sho c k or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly .
14 FCC Compliance S t atement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harm- ful interference, and ( 2) this devi ce must accept any interference received, including inter f erence that may ca use undesired oper ation.
15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limits for radio noise emissions from digital app aratus as set out in the Radio Inte rference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B.
16 Thank you for purchasing this Liquid Cryst al Display TV. Y our LCD TV is designed to be safe, versatile, and easy to use. The design of the proudct is based on Racer , which makes is a fun addition to any roo m.
17 Make sure the following component s are included in the box. Cont act your vendor immediately if any thing is missing or damaged. TV User ’ s Manual Quick St art Guide W arranty and Service Manua.
18 F r ont View Description Function 1 Source Select s the input source to be displayed (TV/CA TV , A V , or S-V ideo). 2 Menu T urns the On-Screen Display (OSD) menus on and of f. 3 Adjust volume Press VOL+ to incr ease the volume. Press VOL– to d ecreases the volume.
19 Input and Output P or ts Description Function 1 DC 12V Connects to the included power adapter . 2 4-IN-1 Connects to VCR/VCD/DVD player CVBS RCA cables or a game device. 3 HEADPHONE Connects to head phones or other audio device. 4 ANT Connects to a n antenna or CA TV cable television line.
20 Connecting to an Antenna or Cable TV 1 Connect one end of the UHF or CA TV cable to the ANT Jack (VHF/UHF IN Jack) on the back o f the TV . 2 Connect the other en d of the VHF/ UHF (Antenna) or CA TV cable to the antenna socket or CA TV cable.
21 Connecting to A V Devices Connect external devices such as a VCR, VCD or DVD playe r , or video game to the TV using the 4-IN-1 cable. Connecting to a V CR/VCD/DVD Player The illustration presented here shows how to connect the TV to a VCR and VCD or DVD player .
22 Connecting to a Video Camera The instructions presented here are a general guide to connecting the TV to a camcorder or other type of digita l camera. Actual connec- tions may vary according to the make and model of the device. Refer to the user’s manual included with th e camcorder or camera for more detailed instruction s.
23 Connecting to a Game Device The instructions presented here are a general guide to connecting the TV to a game device using t he RCA Jacks provided (some game devices may require a unique ada pter that is not provided). Actual connections may vary according to the make and model of the game device.
24 Connecting Exter nal Speak er s or Headphones External speakers or head phones may be used to listen to the TV rather than using the built-in speakers. Connect external speakers or headphones to the headphone line out port as illust rated. Notes • E xternal speakers or headphones are not i ncluded with the product.
25 Connecting the P owe r Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector in to the DC-IN input jack on the rear panel of the TV . 3 Insert the three-pronged plug at the other end of the power cord into a powe r outlet.
26 Using the Remote Co ntrol For best results, use the remote control within a distance of 5 meters from the front of the TV’ s signal sensor . Do not exceed an angle of 30 degrees when pointing at the signa l sensor . Refer to the following illustration.
27 T ur ning the TV On and Of f 1 Press the POWER button on the remote control (or control panel). The five LED indica - tors at the top of the TV blink in sequence ( A ) and then blink once in unison ( B ); the power LEDs on the front of the TV changes from dar k to green, indicating that the power has been turned on.
28 Selecting Channels Press the CH UP button or CH DOWN button on the co ntrol panel to select the channel or enter the specific channel number by pressing the number buttons on the romote control. Switching Source Signals Press SOURCE to select the incoming source signal.
29 Adjusting the V olume Press the VOL UP button to increase the volum e. Press the VOL DOWN button to decrease the volume. The volume level is displayed on the TV. Press MUTE button on the remote control to trun the sound off. Press MUTE on the remote control or press VOL UP/VOL DOWN to trun the sound on.
30 The On-Screen Display (OSD) menu system provides a quick a nd simple method to adjust your TV’ s settings. This chapter describes how to change each of the available settin g s. The OSD can be used with either the remote contro l or front control panel.
31 Brightness 1 Press MENU to enter the OSD menus. 2 Press the CH UP bu tton or CH DOWN button to select Brightness. 3 Press MENU . The brightness slide bar appears. 4 Press the CH UP button to increase the brightness. 5 Press the CH DOWN button to decrease the brightne ss.
32 Contrast 1 Press MENU to enter the OSD menus. 2 Press the CH UP bu tton or CH DOWN button to select Contrast. 3 Press MENU . The contrast slide bar appears. 4 Press the CH UP button to increase the contrast. 5 Press the CH DOWN button to decrease the contr ast.
33 Video Setting Press the MENU butt on to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select V ideo Setting. 2 Press MENU t o enter the Video Settin g menu.
34 Hue 1 Press the CH UP bu tton or CH DOWN button to select Hue. 2 Press MENU to enter the Hue menu. 3 Press the CH UP button to increase the hue towards the red spectrum. The image becomes more red. 4 Press the CH DOWN button to decrease the hue towards the green spectrum.
35 Saturation 1 Press the CH UP bu tton or CH DOWN button to selec t Saturation. 2 Press MENU to enter the Saturation menu. 3 Press the CH UP button to increase the saturation. The screen image becomes more vibrant. 4 Press the CH DOWN button to decrease the saturation.
36 Sharpness 1 Press the CH UP bu tton or CH DOWN button to select Sharpness. 2 Press MENU to enter the Sharpness menu. 3 Press the CH UP button to increase the sharpness. 4 Press the CH DOWN button to decrease the sharpn ess. 5 Press MENU again to confirm the setting and return to the Video Setting menu .
37 Color T emperature 1 Press the CH UP bu tton or CH DOWN button to select Color . 2 Press MENU to enter the Color menu. The following three color temperatures are available. St andard Color P r es s the CH UP button or CH DOWN b ut t o n to select S tandard, then press MENU .
38 Audio Setting Press the MENU butt on to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Audio Setting. 2 Press MENU t o enter the Audio Setting menu.
39 Tr e b l e 1 Press the CH UP bu tton or CH DOWN button to select T r eble. 2 Press MENU to enter the T reble menu. 3 Press the CH UP button to increase the treble. 4 Press the CH DOWN button to decrease the treble. 5 Press MENU to confirm the setting and return to the Audio Setting menu.
40 Bass 1 Press the CH UP bu tton or CH DOWN button to select Bass. 2 Press MENU to enter the Bass menu. 3 Press the CH UP button to increase the bass. 4 Press the CH DOWN button to decrease the bass. 5 Press MENU to confirm the setting and return to the Audio Setting menu.
41 Balance 1 Press the CH UP bu tton or CH DOWN button to select Balance. 2 Press MENU to enter the Balance menu. 3 Press the CH DOWN button to shift the balance to the left speaker . 4 Press the CH UP button to shift the balance to the right speaker .
42 TV Setting Press the MENU butt on to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select TV Setting. 2 Press MENU to e nter the TV Setting menu.
43 TV/CA TV 1 Press the CH UP bu tton or CH DOWN button to select TV/CA TV . 2 Press MENU to enter the TV/CA TV menu. The following choices are available. Receiving Broadcast TV P r es s the CH UP button or CH DOWN button t o s el ec t T V , t he n p re s s MENU .
44 MTS 1 Press the CH UP bu tton or CH DOWN button to select MTS. 2 Press MENU to enter the MTS menu. MAIN 1 Press the CH UP bu tton or CH DOWN button to select MAIN (default). MAIN is highlig hted in red. 2 Press MENU again to confirm the selection. SAP 1 Press the CH UP bu tton or CH DOWN button to select SAP .
45 Auto Program 1 Press the CH UP bu tton or CH DOWN buttons to select Auto Program. 2 Press MENU to enter the Auto Program menu. 3 Press the CH UP bu tton or CH DOWN buttons to select Y es or No .
46 Manual Program This function allows you to locate cha nnels for adding to or erasing from preset channels . 1 Press the CH UP button or CH DOWN buttons to select Manual Program. 2 Press MENU to enter the Manual Program menu. 3 Press the CH UP bu tton or CH DOWN buttons to find the channel you want to add.
47 Channel Add/Erase 1 Press the CH UP button or CH DOWN button to selec t CH. Add/Erase. 2 Press MENU to enter the CH. Add/Erase menu. Select one of the following options. Add Channel 1 Press the CH UP button to sele ct Add. 2 Press the MENU to add the selected channel.
48 Miscellaneous Setting Press the MENU butt on to enter the OSD menus. 1 Press the CH UP button or CH DOWN button to select Miscellaneous. 2 Press MENU to enter the Mis- cellaneous menu.
49 OSD Position 1 Press the CH UP button or CH DOWN button to select OSD Position. 2 Press MENU to enter the OSD Position menu. The following options are available. Horizont al Position 1 Press the CH UP button or CH DOWN button to select H. P osition.
50 Language 1 Press the CH UP bu tton or CH DOWN button to select Language. 2 Press MENU to enter the Language menu. The screen displays the available OSD languages: English and T -Chinese (T raditional Chinese). 3 Press the CH UP bu tton or CH DOWN button to select a language.
51 Sleep Timer The sleep timer turns the TV of f automatically after a set period of time. 1 Press the CH UP bu tton or CH DOWN button to select Sleep.
52 OSD Display This setting allows you to set whether info rmation such as the selected channel is shown on the T V screen when the DISPLA Y button is pressed. 1 Press the CH UP bu tton or CH DOWN button to selec t OSD Display . 2 Press MENU to enter the OSD Display menu.
53 Reset The Reset function returns all of your TV’ s user settings to their fac- tory defaults. Wa r n i n g : The reset fun ction will erase all of your custom and favorite channel settings, and will reset all displa y settings (such as contrast, brightness, etc.
54 T urn the power off before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprint s from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid damaging the finish.
55 Situation Solution No picture and sound. • Connect the power cord properly . • Press th e POWER button on the control panel or remote control. • Press th e SOURCE button to cycle through connected video sources. • Press the CH UP button or CH DOWN button to switch to other TV stations.
56 No sound but have image. • Make sure the source device is funct ioning properly . • Set the volu me to a higher level. • Make sure the audio cable is connected securely . • Turn the mute off. Screen image turns over . • Make sure the vid eo signal cable is con- nected properly .
57 K215-10A1 LCD Panel Size 9.6-inch TFT Aspect Ratio 4:3 Best Resolution 800 (horizontal) x 600 (vertical) Maximum Display Area 194.4 mm (H) x 145.8 mm (W) TV System NTSC Video System S- Video Input and Composite V ideo Input (through the 4-IN-1 cable) Audio System Input: RCA Jack (L/R Audio Input through the 4-IN-1 cable) Output: 3.
58 Aspect Ratio The ratio of width to height of a film, i mage or display screen. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T elevisi on, the original name for cable TV .
59 S-V ideo Super-video, a video cabling standard used to transmit video by keeping brightness (Y) and color informa tion (C) on separate channels. Most often used with camcorders, VCRs, and quality re ceiver s and amplifiers to provide sharper pic- tures.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HANNspree K215-10A1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HANNspree K215-10A1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HANNspree K215-10A1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HANNspree K215-10A1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HANNspree K215-10A1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HANNspree K215-10A1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HANNspree K215-10A1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HANNspree K215-10A1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.