Manuale d’uso / di manutenzione del prodotto DT12-10A1 del fabbricante HANNspree
Vai alla pagina of 59
inderella M TV M ENU VOL CH SUORCE POWER NTSCTVTWEN1203 MAC-001 141 User's Manual 9.6" Liquid Cr ystal Display T ele vision DT12-10A1 2F , No.362, Jui-Kuang Rd., Neihu District, T aipei City 1 14, T aiwan, R.O.C. TEL: 886-2-87520000 F AX: 886-2-87527092 www .
Table of Contents 1 1. Warranty and Service ................................................... 3 2. Preface .................................................................... ..... 4 3. Description of Warning Symbols ................. .............
Table of Contents 2 11. Adjusting On-Screen Display (OSD) Settings ............... 2 8 Brightness ............................................................... 2 9 Contrast ............................................................... ... 3 0 Video Setting .
3 The instructions on this manual are for the model(s) listed on the front cover . Before you sta rt reading, check your product number by looking at the rear of your TV .
4 This manual is designed to assist use rs in setting up and using t he LCD TV . Information in this document has been care fully checked for accuracy; however , no guarantee is given to the correctn ess of the content s. The informatio n in this document is sub ject to change without notice.
5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused.
6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connects to ground; do not r emove it.
7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual carefully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future refere nce. Keep the box and packaging in case th e product needs to be shipped in the future.
8 Optimal V iewing Dist ance inderella inderella M M E NU V O L T V C H S U O R C E P O W E R 102 cm.
9 Import ant Safety Inst ructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near wa ter . 6. Clean only with a dr y cloth. 7. Do not block any ven t ilation openings.
10 10. Protect the power cord from being walked on or pinched particularly at th e plug, conve- nience receptacles, and the point where they exit from the app aratus. 1 1. U se only with a cart, stand, tripod, bracket, or table specified by the manufa cturer , or sold with the apparatus.
11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volt age electric power compo- nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing.
12 Inst allation T o avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna far fr om power trans- mission lines to av oid possible danger .
13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric sho ck or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly .
14 FCC Compliance S t atement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may n ot cause harm- ful interference, and ( 2) this devi ce must accept any interference received, including inter ference that may cause undesired operation.
15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limit s for radio noise emissions from digital app aratus as set out in the Rad io Interference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B.
16 Thank you for purchasing this Liquid Crysta l Display TV . Y our LC D TV is designed to be safe, versatile, and easy to use. The design o f the prod uct is featuring "Disney Princess, Cinderella”, which makes it a fun addi- tion to any room.
17 Make sure the following component s are included in the box. Contact your vendor immediately if any thing is missing or damaged. TV inderella inderella M TV MENU VOL CH SUORCE POWER Wire Material P.
18 Fr o n t V i e w Description Function 1 Menu T urns the On-Screen Display (OSD) menus on and of f. 2 Adjust volume Press VOL + to increase the volume. Press VOL – to decrease the volume. 3 Power LED Green LED indicates power on. 4 Select channel Changes the channel.
19 Input and Output P or ts Description Function 1 Headphone line out Connects to h eadphones or other audio device. 2 DC-IN Connects to the inclu ded power adapter . 3 Left and right audio in (of A V1) Connects to VCR/VCD/DVD player CVBS RCA left and right audio cables (white and red).
20 Connecting to an An tenna/Cable TV 1. Connect one e nd of the VHF/UHF (Antenna) or CA TV cable to ANT Jack (VHF/UHF IN Jack) on the back of the TV . 2. Connect the other end of the VHF/UHF (Antenna) or CA TV cable to the Antenna socket or CA TV cable.
21 Connecting to A V De vices Connect external devices such as VCD/DVD players or VCRs to the TV using the A V1 and A V2 port s on the back of the TV . Connecting to a VCR, VCD or DVD Player The illustration presented here shows how to connect your TV to a VCR, VCD or DVD player .
22 Connecting to a Video Camera The illustration presented here shows how to connect your TV to a camcorder or other type of digit al camera. Actual connections vary according to the make and model o f the device. Note The cables are co lo r-coded (black, re d, white, yellow).
23 Connecting Exter nal Speak ers and Headphones Headphones or externa l speakers may be used to listen to the TV instead of the built-in speakers. Connect your h eadphones to the speaker/head phone line out port as illustrated. Notes • External speakers or headphones are not included with the product.
24 Connecting the P ow er Ada pter 1. Connect the power cord to t he power adapter as illustrated. 2. Plug the power adapte r connector into the DC-IN on the rea r panel of the TV . 3. Insert the three-pronged plug at the other end of the powe r cord into a powe r outlet.
25 Using the R emote Control For best results, use the remote co ntrol within a dist ance of 5 meters from the front of the TV’ s signal sensor . Do not exceed an an gle of 30 degrees when pointing at the signa l sensor . Refer to the following illustration.
26 T ur ning the TV On and Off 1. Press the POWE R button; the power indicator LED changes from red to green, indicating that the power has been turned on. 2. Press the POWE R button again; the power indicator LED cha nges from green to red, indicating that the TV is in st anby (off) m ode.
27 Switching Source Signals Press the SOURCE button on the remote control or the SOURCE button on the control p anel to select the incoming source signal. The current source setting CH xx appears on the top lef t corner of the screen; A V1 or A V 2 appears on the bottom right corner of the screen.
28 The On-Screen Display (OSD) menu system provides a quick a nd simple method to adjust your TV’ s settings. This chapter describes how to change each of the available settin gs. The OSD can be used with either the remote contro l or the front con- trol panel.
29 Brightness 1. Press MENU to enter the OSD menus. 2. Press the CH DOW N button o r CH UP button to select Brightness. 3. Press MENU . The brightness slide bar is highlighted. 4. Press the CH UP button to increase the brightness. 5. Press the CH DOWN button to decrease the brightness.
30 Contrast 1. Press MENU to enter the OSD menus. 2. Press the CH DOW N button o r CH UP button to select Contrast. 3. Press MENU . The contrast slide bar is highlighted. 4. Press the CH UP button to increase the contrast. 5. Press the CH DOWN button to decrease the contrast.
31 Video Setting Press the MENU button enter OSD Main Menu screen. 1. Press the CH DOWN button o r CH UP button to se lect Video Setting. 2. Press MENU to enter the Video Settin g menu.
32 Hue 1. Press the CH DOW N button o r CH UP button to select Hue. 2. Press MENU to enter the Hue s ub - menu. 3. Press the CH UP button to increase green and decrease red. 4. Press the CH DOWN button to decrease green and increase red. 5. Press MENU to confirm the setting and return to the V ideo Setting menu.
33 Saturation 1. Press the CH DOW N button o r CH UP button to select Saturation. 2. Press MENU to enter the Saturation submenu. 3. Press the CH UP button to increase the saturation. 4. Press the CH DOWN button to decrease the saturation. 5. Press MENU to confirm the setting and return to the V ideo Setting menu.
34 Sharpness 1. Press the CH DOW N button o r CH UP button to select Sharpness. 2. Press MENU to enter the SHARP - NESS submenu. 3. Press the CH UP button to increase the sharpness. 4. Press the CH DOWN button to decrease the sharpness. 5. Press MENU to confirm the setting and return to the V ideo Setting menu.
35 Color T emperature 1. Press the CH DOW N button o r CH UP button to select Color T emp. 2. Press MENU to enter the Color T em - perature submenu. There are three default color temperatures to choo se from. St andard Co lor Press the CH DOWN button o r CH UP button to select S tandard, then press MENU .
36 Audio Setting Press the MENU button enter OSD Main Menu screen. 1. Press the CH DOWN button o r CH UP button to se lect Audio Setting. 2. Press MENU to enter the Audio Setting menu.
37 Tr e b l e 1. Press the CH DOW N button o r CH UP button to select T reble. 2. Press MENU to enter the treble sub - menu. 3. Press the CH UP button to increase the treble. 4. Press the CH DOWN button to decrease the treble. 5. Press MENU to confirm the setting and return to the Audio Setting menu.
38 Bass 1. Press the CH DOW N button o r CH UP button to select Bass. 2. Press MENU to enter the Ba ss sub - menu. 3. Press the CH UP button to increase the bass. 4. Press the CH DOWN button to decrease the bass. 5. Press MENU to confirm the setting and return to the Audio Setting menu.
39 Balance 1. Press the CH DOW N button o r CH UP button to select Balance. 2. Press MENU to enter the Balance submenu. 3. Press the CH DOWN button to shift the balance to the lef t speaker . 4. Press the CH UP button to shif t the balance to the right speaker .
40 Mute 1. Press the CH DOW N button o r CH UP button to select Mute. 2. Press MENU to enter the Mute s ub - menu. 3. Press the CH UP button to turn t he mute off. 4. Press the CH DOWN button to turn the mute on. 5. Press MENU to confirm the setting and return to the Audio Setting menu.
41 Note The setting menu is available when current sele ct source is TV . TV Setting Press the MENU button enter OSD Main Menu screen. 1. Press the CH DOWN button o r CH UP button to se lect TV Setting.
42 TV/CA TV 1. Press the CH DOW N button o r CH UP button to select TV/CA TV . 2. Press MENU to enter the TV/ CA TV submenu. Receiving Cable TV Press the CH UP button to select CA TV , then press MENU . Receiving Broadcast TV Press the CH DOWN button to select TV , then press MENU .
43 MTS 1. Press the CH DOW N button o r CH UP button to select MTS. 2. Press MENU to enter the MTS s ub - menu. Select from the following options. MAIN Press the CH DOWN button o r CH UP button to select MAIN. A green dot appears and MAIN is highlighted in yel - low .
44 Auto Program 1. Pre ss the CH DOWN butto n o r CH UP button to selec t Auto Program. 2. Press MENU to enter the Auto Pro - gram Setting submenu. 3. Press the CH DOW N button o r CH UP button to select ON or OFF and p ress MENU . The screen shows “Auto Program.
45 Manual Program 1. Press the CH DOW N button o r CH UP button to select “Manual Program”. 2. Press MENU to enter the Manual Pro - gram submenu. 3. Press the CH DOWN button an d the CH DOWN butto n to find the channel you want to add. Press MENU to select the channel 4.
46 Channel Add/Erase 1. Select the channe l you want to add or delete, for exampl e, Channel 28. 2. Press the CH DOW N button o r CH UP button to select CH. Add/Erase. 3. Press MENU to enter the Channel Add/Erase submenu. Select fro m the following options.
47 Favorite Ch annels 1. Press the CH DOWN button o r CH UP button to se lect Favorites CH. Edit. 2. Press MENU to enter the Favorites CH. Edit submenu. 3. The screen displays the four favorite channels: M1, M2, M3, and M4. 4. Press the CH DOWN bu tton an d the CH UP button to select the channel number you want to set for M1.
48 Miscellaneous Setting Press the MENU button to enter OSD Main Menu screen. 1. Press the CH DOWN button o r CH UP button t o select Mis- cellaneous Setting.
49 Language 1. Press the CH DOW N button o r CH UP button to select Language. 2. Press MENU to enter the Language submenu. 3. The screen displays the available OSD languages: English and T -Chinese (Tradition al Chinese). 4. Press the CH DOWN button an d the CH UP button to select a language.
50 Sleep Timer The sleep timer turns the TV of f automatically after a set pe riod of time. 1. Press the CH DOW N button o r CH UP button to select Sleeper . 2. Press MENU to enter the Sleeper submenu. 3. The screen displays the available sleep timer setting: Of f, 30, 60, 90, and 120 minutes.
51 OSD Display This setting allows you to set th e amount o f information that appears on the LCD screen when the DISPLA Y button is pressed. Y ou can choose from three settings: Of f, Portion, or All. 1. Press the CH DOW N button o r CH UP button to select OSD Display .
52 Time Setting This section shows you how to change your TV’ s clock setting. 1. Press the CH DOW N button o r CH UP button to select T ime Setting. 2. Press MENU to enter the T ime Setting submenu. 3. The screen displays th e current set- ting. The hour is highlighted in yellow .
53 Re se t The Reset function returns all of your TV’ s user settings to their fac- tory defaults. W arning: The reset function erases all of yo ur custom and favorite channel set- tings, and will reset all display settings (such as cont rast, brightness, etc.
54 T urn the power off b efore you begin cleaning the TV. Use a clean lens cloth to remove dust and finger- prints from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid the damaging the finish. Wipe the shell with a dry soft cloth a nd use neutral cleaning fluids.
55 Situation Solution No picture and sound. • Connect the power cord prope rly . • Press the POWER button on the control panel or remote control. • Press the SOURCE button to cycle through con- nected video sources. • Press CH UP or CH DOWN to switch to other TV stations.
56 No sound but have image. • Make sure the source device is functioning properly . • Set the volume to a higher level. • Make sure the audio cable is connected securely . • T urn the mute off. Screen image turns over . • Make sure the video si gnal cable is connected properly .
57 Item Specifications DT12-10A1 LCD Panel Size 9.6-inch TFT Aspect Ratio 4:3 Best Resolution 800 (horizontal) x 600(vertical) Maximum Display Area 194.
58 Aspect Ratio The ratio of width to height of a film, image or displ ay scree n. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T elevisi on, the origin al name for cable TV .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il HANNspree DT12-10A1 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del HANNspree DT12-10A1 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso HANNspree DT12-10A1 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul HANNspree DT12-10A1 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il HANNspree DT12-10A1, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del HANNspree DT12-10A1.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il HANNspree DT12-10A1. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo HANNspree DT12-10A1 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
