Manuale d’uso / di manutenzione del prodotto Electroglide del fabbricante H-P Products
Vai alla pagina of 16
ELECTROGLIDE ™ ELECTRIC POWERHEAD OWNER’S MANUAL Review this manual before operating your Electroglide Electric Powerhead.
TABLE OF CONTENTS Subject Page Safety Instructions 3 Parts and Features 4 Assembling Vacuum System 5 General Operation 6 Electroglide Attachments Handle Attachments 6 Wand Assembly Attachments 6 Perfo.
WARNING To reduce the risk of fire, electrical shock or injury: ELECTROGLIDE 3 IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this vacuum system.
4 ELECTROGLIDE It is important to know your Electroglide parts and features to assure its proper and safe use. Review these before using your Electroglide. WARNING Always unplug the Electroglide before cleaning the brush area as brush may suddenly restart.
ELECTROGLIDE 5 Before assembling your Electroglide Electric Powerhead, be sure you have all parts shown in PARTS AND FEATURES. 1. Connect the upper and lower wand sections. (The wand swivel is located on the lower wand.) 2. Slide the upper and lower wands together until the wand button snaps into place.
6 ELECTROGLIDE GENERAL OPERATION Hose Handle Attachments If the Electroglide is attached, turn cleaner OFF before removing hose handle from wands. 1. Press lock button, then pull to remove handle from wand. 2. Slide attachments firmly on handle as needed.
Handle Release Pedal ELECTROGLIDE 7 Edge Cleaner Active brush edge cleaners are on both sides of the Electroglide. Therefore, guide either side of the Electroglide along baseboards or next to furniture to help remove dirt trapped at carpet edges.
Light Bulb Replacemnent 1. Disconnect cleaner from electrical outlet. 2. Remove light cover by pressing in and lifting both sides of cover as shown. WARNING Always unplug electrical cord and vacuum hose before servicing and maintaining the Electroglide Electric Powerhead.
Base Brush Support Tab ELECTROGLIDE 9 MAINTENANCE AND CARE To r emove belt: 1. Remove light cover and light bulb as shown on Page 8. 2. Unscrew the Electroglide Powerhead cover screws. Belt Removal and Replacement The belt should also be checked periodically to be sure it is in good condition.
10 ELECTROGLIDE Belt Removal (continued) 6. Remove worn belt. 7. Slide brush supports off to check and clean brush support areas. MAINTENANCE AND CARE To replace belt: 1. Slide washers and brush supports onto brush assembly. 2. Install new belt over motor drive, then over brush sprocket.
ELECTROGLIDE 11 MAINTENANCE AND CARE Belt Replacement (continued) 5. Tilt cover to back. Press cover firmly until side tabs snap into place. Replace cover screws, light bulb and light cover. Brush Replacement 1. Remove the Electroglide Powerhead cover, belt and brush assembly.
12 ELECTROGLIDE ELECTROGLIDE REPLACEMENT PARTS.
ELECTROGLIDE 13 ELECTROGLIDE REPLACEMENT PARTS Illus. No. 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 Part No. 7922 7923 7972 7925 7926 7927 7967 7965 7929 7930 7931 7932 7933 7.
14 ELECTROGLIDE LIMITED W ARRANTY H-P PR ODUCTS, INC. warrants that the Electroglide Electric Po werhead, when used for household purposes, pursuant to Seller’s instructions, will be free from defects in materials and workmanship for a period of one year from the date of the initial consumer purchase.
ELECTROGLIDE 15 H-P PRODUCTS, INC. 512 W. GORGAS STREET LOUISVILLE, OHIO 44641 SERVICE INFORMATION The instructions in this booklet serve as a guide to routine maintenance. If additional service or repairs are required, please call 1-800-822-8356 for your nearest authorized service dealer.
H-P Products, Inc. 512 W. Gorgas Street Louisville, Ohio 44641-0912 HVS-968 -NL 0 2 /0 2 ®.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il H-P Products Electroglide è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del H-P Products Electroglide - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso H-P Products Electroglide imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul H-P Products Electroglide ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il H-P Products Electroglide, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del H-P Products Electroglide.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il H-P Products Electroglide. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo H-P Products Electroglide insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
