Manuale d’uso / di manutenzione del prodotto DCD-PRO1000 del fabbricante American Audio
Vai alla pagina of 36
Featuring: Sampling Sampling FLIP FLOP DCD-PRO1000 User Guide and Refer ence Manual 4295 Charter Street Los Angeles Ca. 90058 www .americanaudio.us Rev .
CONTENTS © American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 2 SAFETY PRECAUTIONS........................................................................................................................3 ELECTRICAL PRECAUTIONS.
NOTE: This unit may cause interference to radio and television r eception. NOTE: This CD player uses a semiconductor laser . It is recommended for use in a r oom at the fol - lowing temperatur e: 41˚.
ELECTRICAL PRECAUTIONS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION The exclamation point within an equilateral triangle is intended to alert t he user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
I. Read Instructions - All the safety and operat- ing instructions should be read befor e the CD Player is operated. The safety and operating instructions should be saved for future refer ence. 2. Heed Warnings - All warnings on the CD Player and in the operating instructions should be adhered to.
Introduction: Congratulations and thank you for purchasing the American Audio ® DCD-PRO1000™ CD player . This CD player is a repr esentation of American Audio’ s continuing commitment to produce the best and highest quality audio products possible at an af fordable price.
(b) FLIP-FLOP: This feature is used in conjunction with American Audio ® mixers that also feature Fader “Q” Start. For FLIP-FLOP r esults you must use both sides of the DCD-PRO1000™. Connect your DCD-PRO1000 as described in the set-up section of this manual.
1. Checking the Contents Be sur e your DCD-PRO1000™ was shipped with the following: 1) DCD-PRO1000™ T ransportation Unit 2) DCD-PRO1000™ Controller Unit 3) Operating Instructions (This Booklet) 4) T wo (2) Control Cables 5) T wo (2) "Q-Start" 1/8” mini plug.
CONNECT T O MAIN UNIT 2 CONTROL ST ART UNIT 2 CONNECT T O MAIN UNIT 1 CONTROL ST ART UNIT 1 GENERAL FUNCTIONS AND CONTROLS A. CONTROLLER UNIT (FIGURE 3) 1. EJECT FUNCTION - Pressing this will eject the CD. The eject function will only when the unit is in cue mode, this is to prevent accidentally ejecting the disc when in play mode.
or Phase ef fect. See built-in effects on page 28. 6. HOLD BUTTON - This button allows you to set and lock any new parameters you set to the effects. This button will glow bright blue when the hold function is activated. If the hold function is not selected any changes to the ef fect param- eters will be momentary .
This button allows you to override the inter nal beat clock and manually set a tracks BPMs. T o manual set the BPMs; tap this button a few times to a tracks heavy down beat, the unit will automatically calculate your tapping and trans - late it into a tracks BPMs.
pitch (if any) that is being applied to the track. 29. BANK BUTTONS 1-3 - These button ar e used to store either three (3) cue points or three (3) samples. Each Bank Button can store either a sample or a cue point. 6 sec. samples each bank. 30. SAMPLER BUTTON - This is used to acti - vate the sampler function.
DIGIT AL OUT CONNECT T O REMO TE CONTROL 2 CONNECT T O REMO TE CONTROL 1 A UDIO OUT A UDIO OUT DIGIT AL OUT Figure 4 GENERAL FUNCTIONS AND CONTROLS (Cont.) © American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 13 B. TRANSPOR T UNIT (FIGURE 4) 39.
the left channels output. 45. DRIVE 1 DIGIT AL OUT - This jack sends a digital ster eo out signal. Use this connection to create near perfect copies of your disc to a Mini disc, CD-R, or any other recor ding device with a digital input.
© American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 15 GENERAL FUNCTIONS AND CONTROLS (Cont.) D. LCD DISPLA Y P ANEL (FIGURE 5) 52. PLA Y INDICA TOR - The "PLA Y" indicator will glow when the unit is in play mode.
BASIC OPERA TIONS Figure 7: Hold down the Eject Button to remove a disc. Figure 6: When loading a disc always hold the disc by it edges and load the disc label side up. Figure 8: T apping the reverse track button will jump back to the previous track. Figure 9: T apping the forward track button will skip forward to the next track.
5. STOPPING PLA YBACK - Figures 10 & 11 Stopping playback will not stop the drive mechanism, but merely pause or cue the track, this function allows the unit to begin play instantly . The drive mechanism will only stop if a disc is ejected or the unit has gone in to sleep mode.
BASIC OPERA TIONS (CONT .) © American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 18 7. FRAME SEARCH This feature allows you to scr oll through a track frame by frame, allowing you to find and set a starting cue, sample, or loop point.
Figure 17 BASIC OPERA TIONS (CONT .) 2) Y ou may also use the JOG WHEEL (20) to set a cue point. While a disc is in P AUSE or CUE mode, use the JOG WHEEL (20) to scroll thr ough a track to find your desired starting point. Once you have found your desired position press the PLA Y BUTTON (32) to set your cue point.
BASIC OPERA TIONS (CONT .) Press the IN BUTTON (25). This will set the starting point of the SEAMLESS LOOP . The IN BUTTON (25) L.E.D. will blink. Press PLA Y/P AUSE BUTTON (32) to activate playback mode. Figure 19 Figure 18 © American Audio ® - www .
BASIC OPERA TIONS (CONT .) © American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 21 EXITING A LOOP - T o exit a SEAMLESS LOOP , press the OUT BUTTON (24) . The IN BUTTON (25) and OUT BUTTON (24) L.E.D.s will remain on, but will stop flashing.
BASIC OPERA TIONS (CONT .) Figure 25 Figure 24 Figure 26 Y our sample can now be recalled at any time even when the unit is in P AUSE MODE. T o recall a sample be sure the sample function is on, by pressing the SAMPLE BUTTON (30) until the red sample button L.
Changing the Sample Parameters: Changing the sample parameters allows you to change the sample's volume (SR) and pitch (SP). The parameter values for the pitch range from -0 94~0 00~+0 94 and volume values range from 0 00 to 2 55 (0 00 being the lowest).
13. BANK (FLASH) ST ART BUTTONS (30): These buttons are used to store your samples and cue points. Only a sample or a cue point can be stored into each of these thr ee banks. When a sample is stored in to these banks you may use the sample starting point as a cue point.
BASIC OPERA TIONS (CONT .) © American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 25 TIME BAR INDICA TOR - Details the time defined in the TIME METER (65, 66, & 67) as a visual bar icon.
© American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 26 BASIC OPERA TIONS (CONT .) 17. RECALL FLASH MEMOR Y : The DCD-PRO1000 can store all your user pr ogrammed cue points and effect parameters in to memory . These setting may be recalled at any time, even when a disc has been removed and reloaded at a later time.
Figure 41 Using the Pitch slider (18): Be sure the pitch function has been engaged as described above. T o use the PITCH SLIDER slide the slider up and down. Down will increase the pitch and up will decrease the pitch. PITCH ADJUSTMENTS © American Audio ® - www .
PITCH ADJUSTMENTS © American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 28 2. PITCH BENDING: Unlike the PITCH SLIDER (35 ) adjustment t his function will momentarily increase or decrease a tracks speed during playback.
PITCH ADJUSTMENTS © American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 29 Figure 45 4. JOG WHEEL (20): The JOG WHEEL will temporarily bend the pitch if a track is in p.
BUIL T -IN EFFECTS The DCD-PRO1000™ comes with nine built in effects. These effects can be used one at a time or you may choose to overlap the effects and use up to four at a time. The Built-in effects include Scratch, Skid, Filter , Phase, Flanger , Echo, Robot, Pan, and T rans.
© American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 31 Figure 49 FLANGER/ECHO/ROBOT EFFECT : The flanger effect alters the output signal and create an effect similar to the frequencies phasing in and out of each other .
© American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 32 BUIL T -IN EFFECTS Figure 52 HOLD BUTTON: Use the HOLD BUTTON (6) to lock your customized parameters. If the hold button is not activated any changes to your parameters will be momentary .
CONNECT T O MAIN UNIT 2 CONTROL ST ART UNIT 2 CONNECT T O MAIN UNIT 1 CONTROL ST ART UNIT 1 © American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 33 FLIP-FLOP™ This featur e is kind of “auto pilot”.
© American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 34 W ARRAN TY INFORM A TION: The DCD-P RO1000™ carri es a ONE year (365 days) limited war- ranty . This warra nty covers parts and labor . Please fill out the enclosed warran ty car d to valida te you r purch ase an d warra nty .
© American Audio ® - www .americanaudio.us - DCD-PRO1000™ Instruction Manual Page 35 GENERAL Model: American Audio® DCD-PRO1000™ - Professional CD Player T ype: T ray loading, digital compact disc audio player .
©American Audio® W orld Headquarters: 4295 Charter Str eet Los Angeles, CA 90058 USA T el: 323-582-3322 Fax: 323-582-3311 W eb: www .americanaudio.us E-mail: info@americanaudio.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il American Audio DCD-PRO1000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del American Audio DCD-PRO1000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso American Audio DCD-PRO1000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul American Audio DCD-PRO1000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il American Audio DCD-PRO1000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del American Audio DCD-PRO1000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il American Audio DCD-PRO1000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo American Audio DCD-PRO1000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
