Il manuale d’uso Gigabyte GA-Z87X-SLI Motherboard

Sintesi del contenuto nelle pagine seguenti del manuale d’uso

Pagina 1

GA-Z87X-SLI User's Manual Rev . 1 1 02 1 2ME-Z87XSLI - 1 1 02R.
Pagina 2

Motherboard GA-Z87X-SLI Oct. 15, 2013 Oct. 15, 2013 Motherboard GA-Z87X-SLI.
Pagina 3

Copyright © 2013 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
Pagina 4

- 4 - T able of Contents Box C onte nts ............................ ....................................................................................... 6 Optional Items .............................................................................
Pagina 5

- 5 - Chapter 4 Dri vers Installati on ....................................................................................... 73 4-1 Chipset Drivers .............................................................................................. 73 4-2 Applic ation Soft ware .
Pagina 6

- 6 - Bo x Content s 5 GA-Z87X-SLI motherboard 5 Motherboard driver disk 5 User's Manual 5 Quick Installation Guide 5 Four SA T A cables 5 I/O Shield 5 One 2-W ay SLI bridge connector Optional I tems  2-portUSB2.0bracket(PartNo.
Pagina 7

- 7 - GA-Z 87X-SLI Mot her board L ay out F_USB30 KB_MS_USB CPU_F AN LGA1 150 AT X AUDIO DDR3_4 DDR3_2 DDR3_3 DDR3_1 B AT A TX_12V_2X4 Intel ® Z87 CODEC CLR_CMOS M_BIOS B_BIOS VGA DVI USB30 LAN PCIEX.
Pagina 8

- 8 - GA-Z87X-SLI Motherboard Block Diagram Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications." iTE ® Super I/O PS/2 KB/Mouse Intel ® Z87 PCIe CLK (100MHz) PCIe CLK (100MHz) 1 PCI Express x16 2 PCI Express x8 Dual BIOS COM LPT 8 USB 2.
Pagina 9

- 9 - Hardware Installation 1- 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damagedas aresultof electrostaticdischarge (ESD).
Pagina 10

- 10 - Hardware Installation 1- 2 P roductSpe cications CPU  Support for Intel ® Core ™ i7 processors/Intel ® Core ™ i5 processors/ Intel ® Core ™ i3 processors/Intel ® Pentium ® processors/ Intel ® Celeron ® processors in the LGA1 150 package (GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.
Pagina 11

- 1 1 - Hardware Installation Storage Interface  Chipset: - 6 x SA T A 6Gb/s connectors - Support for RAID 0, RAID 1, RAID 5, and RAID 10 USB  Chipset: -  6xUSB3.0/2.0ports(4ports onthebackpanel, 2portsavailablethrough theinternalUSBheader) -  8xUSB2.
Pagina 12

- 12 - Hardware Installation BIOS  2 x 64 Mbit  ash  Use of licensed AMI UEFI BIOS  Support for DualBIOS ™  PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a Unique Features  Support for Q-Flash  Support for Xpress Install  Support for APP Center * A vailable applications in APP Center may differ by motherboard model.
Pagina 13

- 13 - Hardware Installation 1-3 Installing the CPU and C PU Cooler Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (GotoGIGABYTE'swebsiteforthelatestCPUsupportlist.
Pagina 14

- 14 - Hardware Installation B. Follow the steps below to correctly install the CPU into the motherboard CPU socke t. Step 1: Gently press the CPU socket lever handle down and away from the socket with your nger.Then completely lift the CPU socket lever and the metal load plate/plastic cover will be lifted as well.
Pagina 15

- 15 - Hardware Installation 1-3 -2 Inst all ing th e CPU Cool er Followthesteps belowtocorrectly installthe CPUcooleron themotherboard.(The followingprocedureuses Intel ® boxedcoolerastheexamplecooler .
Pagina 16

- 16 - Hardware Installation 1- 4 Installing the Memor y Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory . It is recommended that memory of the same capacity , brand, speed, and chips be used.
Pagina 17

- 17 - Hardware Installation 1- 4 -2 Ins tall ing a M emo r y Before installing a memory module, make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR3 and DDR2 DIMMs are not compatible to each other or DDR DIMMs.
Pagina 18

- 18 - Hardware Installation 1-5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card.
Pagina 19

- 19 - Hardware Installation 1-6 Sett ing up AMD Cross Fire ™ /NVIDIA ® SLI ™ Conguration (Note) Thebridgeconnector(s)maybeneededornotdependingonyourgraphicscards. Procedure and driver screen for enabling CrossFire/SLI technology may differ by graphics cards and driver version.
Pagina 20

- 20 - Hardware Installation 1- 7 Back Panel Con nec tors After installing the HDMI device, make sure to set the default sound playback device to HDMI. (The item name may differ depending on your operating system. The screenshot below is from Windows8.
Pagina 21

- 21 - Hardware Installation Center/Subwoofer Speaker Out Jack (Orange) Usethisaudiojacktoconnectcenter/subwooferspeakersina5.1/7.1-channelaudioconguration. Rear Speaker Out Jack (Black) Thisjackcanbeusedtoconnectfrontspeakersina4/5.
Pagina 22

- 22 - Hardware Installation 1-8 Internal Connec tors 1) A TX_12V_2X4 2) AT X 3) CPU_F AN 4) SYS_F AN1/2/3 5) SA T A3 0/1/2/3/4/5 6) F_P ANEL 7) F_AUDIO 8) SPDIF_O 9) SPDIF_IN 10) B AT 11 ) F_USB30 12.
Pagina 23

- 23 - Hardware Installation 1/2) A TX_12V_2X4/A TX (2x4 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components onthe motherboard.
Pagina 24

- 24 - Hardware Installation • Be sure to connect fan cables to the fan headers to prevent your CPU and system from overheat - ing. Overheating may result in damage to the CPU or the system may hang. • These fan headers are not conguration jumper blocks.
Pagina 25

- 25 - Hardware Installation The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header , make sure the wire assignments and the pin assignments are matched correctly .
Pagina 26

- 26 - Hardware Installation 7) F_AUDIO (Front Panel Audio Header)  Thefrontpanel audioheader supportsIntel High Denitionaudio (HD)and AC'97audio. Y oumay connect your chassis front panel audio module to this header .
Pagina 27

- 27 - Hardware Installation 9) SPDIF_IN (S/PDIF In Header) This header supports digital S/PDIF In and can connect to an audio device that suppo rts digital audio out via an optional S/PDIF In cable. For purchasing the optional S/PDIF In cable, please contact the local dealer .
Pagina 28

- 28 - Hardware Installation 12) F_USB1/F_USB2/F_USB3 (USB 2.0/1.1 Headers)  The headers conform toUSB 2.0/1.1 specication. EachUSB header can providetwo USB ports viaan optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer .
Pagina 29

- 29 - Hardware Installation 13) COMA (Serial Port Header) The COM header can provide one serial port via an optional COM port cable. For purchasing the optional COM port cable, please contact the local dealer .
Pagina 30

- 30 - Hardware Installation 15) CLR_CMOS (Clear CMOS Jumper)  Use this jumper to clearthe BIOS conguration and resetthe CMOS values to factorydefaults. T o clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
Pagina 31

- 31 - BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard.
Pagina 32

BIOS Setup - 32 - 2-1 Startup Screen The following startup Logo screen will appear when the computer boots. Function Keys: <DEL>: BIOS SETUPQ-FLASH Press the <Delete> key to enter BIOS Setup or to access the Q-Flash utility in BIOS Setup. <F9>: SYSTEM INFORMA TION Press the <F9> key to display your system information.
Pagina 33

- 33 - BIOS Setup Setup Menus Function Keys Help Enter Q-Flash Select Default Language CongurationItems Current Settings 2-2 The Main Menu A. Dashboard Mode (Default) Differing from traditional .
Pagina 34

BIOS Setup - 34 - BIOS Setup Menus  M.I.T .  Usethismenu tocongure theclock, frequency ,and voltagesof yourCPU andmemory ,etc. Orcheck the system/CPU temperatures, voltages, and fan speeds.
Pagina 35

- 35 - BIOS Setup 2-3 M.I.T . Whether the system will work stably with the overclock/overvoltage settings you made is dependent onyouroverallsystem congurations.Incorrectlydoingoverclock/overvoltagemayresultin damage to CPU, chipset, or memory and reduce the useful life of these components.
Pagina 36

BIOS Setup - 36 - ` M.I.T . Current Status This screen provides information on CPU/memory frequencies/parameters. ` Advanced Frequency Settings & Performance Upgrade (Note)  Provides you with ve different overclocking congurations.
Pagina 37

- 37 - BIOS Setup (Note) This item is present only when you installa CPU that supports thisfeatur e. For more information about Intel ® CPUs' unique features, please visit Intel's website.
Pagina 38

BIOS Setup - 38 - (Note) This item is present only when you installa CPU that supports thisfeatur e. For more information about Intel ® CPUs' unique features, please visit Intel's website.
Pagina 39

- 39 - BIOS Setup ` Advanced Memory Settings & ExtremeMemoryProle(X.M.P .) (Note)  Allowsthe BIOSto readthe SPDdata onXMP memorymodule(s) toenhance memoryperformance when enabled.
Pagina 40

BIOS Setup - 40 - This sub-menu provides memory timing settings for each channel of memory . This sub-menu provides memory timingsettingsforeachchannel ofmemory .Therespectivetimingsettingscreensare congurableonlywhen Memory Timing Mode is set to Manual or Advanced Manual .
Pagina 41

- 41 - BIOS Setup ` Advanced V oltage Settings This sub-menu allows you to set CPU, chipset and memory voltages..
Pagina 42

BIOS Setup - 42 - ` PC Health Status & Reset Case Open Status  Disabled Keepsorclearstherecordofpreviouschassisintrusionstatus.(Default)  Enabled Clears the record of previous chassis intrusion status and the Case Open  eld will show "No" at next boot.
Pagina 43

- 43 - BIOS Setup & CPU Vcore/CPU VRIN/DRAM V oltage/+3.3V/+5V/+12V/CPU V AXG Displays the current system voltages. & CPU/System T emperature Displays current CPU/system temperature. & CPU/System Fan Speed Displays current CPU/system fan speeds.
Pagina 44

BIOS Setup - 44 - ` Miscellaneous Settings & PCIeSlotConguration Allows you to set the operation mode of the PCI Express slots to Gen 1, Gen 2, or Gen 3. Actual operation mode is subject to the hardware specication of each slot.
Pagina 45

- 45 - BIOS Setup 2-4 System Information This section provides information on your motherboard model, and BIOS version. Y ou can also select the default language used by the BIOS and manually set the system time. & System Language Selects the default language used by the BIOS.
Pagina 46

BIOS Setup - 46 - 2-5 BIOS Features & Boot Option Priorities  Speciestheoverallbootorderfromtheavailabledevices.  Removablestorage devices thatsupport GPT format willbe prexedwith "UEFI:" stringon the bootdevice list.
Pagina 47

- 47 - BIOS Setup & Security Option  Species whether a password is required every time the system boots, or only when youenter BIOS Setup. After conguringthis item,set thepassword(s) under the Administrator Password/User Password item.
Pagina 48

BIOS Setup - 48 - & Execute Disable Bit (Note) Enables or disables Intel ® Execute Disable Bit function. This function may enhance protection for the computer , reducing exposure to viruses and malicious buffer overow attacks when working with its supportingsoftwareandsystem.
Pagina 49

- 49 - BIOS Setup & Administrator Password  Allows you to congure an administrator password. Press <Enter> on this item, type the password, and thenpress <Enter>.Y ouwill be requested toconrm the password.
Pagina 50

BIOS Setup - 50 - 2-6 Peripherals & Initial Display Output  Speciesthe rst initiation of the monitordisplay from the installed PCI graphicscard, PCI Express graphics card or the onboard graphics.
Pagina 51

- 51 - BIOS Setup  Ma nual Allows you to determine whether to rout the USB 3.0 ports to the xHCI or EHCI controller before booting to OS, and also provides you with options to manually rout each USB 3.0/2.0 port to xHCI or EHCI. & Audio Controller  Enablesordisablestheonboardaudiofunction.
Pagina 52

BIOS Setup - 52 - ` SA T AConguration & Integrated SA T A Controller  EnablesordisablestheintegratedSAT A controllers.
Pagina 53

- 53 - BIOS Setup & Parallel Port  Enablesordisablestheonboardparallelport.(Default:Enabled) & Device Mode  This item is congurable only when Parallel Port is set to Enabled . Selects an operating mode for the onboard parallel (LPT) port.
Pagina 54

BIOS Setup - 54 - & Power Loading Enables or disables dummy load. When the power supply is at low load, a self-protection will activate causing it to shutdown or fail. If this occurs, please set to Enabled . Auto  letsthe BIOSautomatically congurethis setting.
Pagina 55

- 55 - BIOS Setup & AC BACK Determines the state of the system after the return of power from an AC power loss.  Memory The system returns to its last known awake state upon the return of the AC power .  Always On The system is turned on upon the return of the AC power .
Pagina 56

BIOS Setup - 56 - 2-8 Save & Exit & Save & Exit Setup Press <Enter> on this item and select Ye s . This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu.
Pagina 57

- 57 - Conguring SA T A Hard Drive(s) Chapter 3 ConguringSA T A HardDrive(s) (Note1) SkipthisstepifyoudonotwanttocreateRAIDarrayontheSA T Acontroller . (Note2) RequiredwhentheSA T A controllerissettoAHCIorRAIDmode.
Pagina 58

Conguring SA T A Hard Drive(s) - 58 - Step 2: Ifyou wantto congureUEFI RAID,follow thestepsin "C-1." T oenter thelegacyRAID ROM,save thesettings and exit BIOS Setup. Refer to "C-2" for more information.
Pagina 59

- 59 - Conguring SA T A Hard Drive(s) C-1.UEFIRAIDConguration This mode supports Windows 8 64-bit installation only . Step 1: In BIOS Setup, go to BIOS Features and set Windows 8 Features to Windows 8 and CSM Support to Never (Figure2).
Pagina 60

Conguring SA T A Hard Drive(s) - 60 - Step 3: On the Intel(R) Rapid Storage T echnology menu, press <Enter> on Create RAID V olume to enter the Create RAID V olume screen.Enteravolumenamewith1~16letters(letterscannotbespecialcharacters)underthe Name  item and press <Enter>.
Pagina 61

- 61 - Conguring SA T A Hard Drive(s) Step 5: After setting the capacity , move to Create V olume andpress<Enter>tobegin(Figure6). After completing, you'll be brought back to the Intel(R) Rapid Storage T echnology screen.
Pagina 62

Conguring SA T A Hard Drive(s) - 62 - Delete RAID V olume T o delete a RAID array , press <Enter> on the volume to be deleted on the Intel(R) Rapid Storage T echnology screen. After entering the RAID VOLUME INFO screen, press <Enter> on Delete to enter the Delete screen.
Pagina 63

- 63 - Conguring SA T A Hard Drive(s) C-2.ConguringLegacyRAIDROM Enter the Intel ® legacy RAIDBIOS setuputilityto congurea RAIDarray . Skipthis stepandproceed withthe installationofWindowsoperatingsystemforanon-RAIDconguration.
Pagina 64

Conguring SA T A Hard Drive(s) - 64 - Step 3: After entering the CREA TE VOLUME MENU  screen, enter a volume name with 1~16 letters (letters cannot bespecial characters) under the Name  item and press<Enter>.
Pagina 65

- 65 - Conguring SA T A Hard Drive(s) Step 5: Enter the array capacity and press <Enter>. Finally press <Enter> on the Create V olume item to begin creating the RAID array .
Pagina 66

Conguring SA T A Hard Drive(s) - 66 - Recovery V olume Options Intel ® Rapid Recover T echnology provides data protection by allowing users to easily restore data and system operation using a designated recovery drive.
Pagina 67

- 67 - Conguring SA T A Hard Drive(s) Step 3: Press <Enter> under the Select Disks item. In the SELECT DISKS box, press <T ab> on the hard drive you want to use forthe master drive and press <Space> on the hard drive you want to usefor the recovery drive.
Pagina 68

Conguring SA T A Hard Drive(s) - 68 - Acceleration Options Thisoptionallowsyoutoviewthe statusofyouraccelerateddrive/volume(Figure20) createdusingtheIntel ® IRST utility .
Pagina 69

- 69 - Conguring SA T A Hard Drive(s) 3-2 Installing the SA T A RAID/AHCI Driver and Operating System With the correct BIOS settings, you are ready to install the operating system.
Pagina 70

Conguring SA T A Hard Drive(s) - 70 - Step 2: Select the new hard drive to add into the array to be rebuilt and press <Enter>. The following screen appears, indicating that an automatic rebuild will be performed after you enter the operating system.
Pagina 71

- 71 - Conguring SA T A Hard Drive(s) • Performing the Rebuild in the Operating System While in the operating system, make sure the chipset driver has been installed from the motherboard driver disk. Then launch the Intel ® Rapid Storage T echnology utility from the desktop.
Pagina 72

Conguring SA T A Hard Drive(s) - 72 - • Restoring the Master Drive to a Previous State (for Recovery V olume only) When two hard drives are set to Recovery V olume in Update on Request mode, you can restore the master drive data to the last backup state when needed.
Pagina 73

- 73 - Drivers Installation 4-1 Chipset Drivers Chapter 4 Drivers Installation • Before installing the drivers, rst install the operating system. (The following instructions use Windows8astheexampleoperatingsystem.
Pagina 74

Drivers Installation - 74 - 4-2 Application Software This page displays the apps that GIGABYTE develops and some free software. Y ou can select the apps you want and click the Install icon to begin th e installation. 4-3 Information This page provides detailed information on the drivers on the driver disk.
Pagina 75

- 75 - Unique Features 5-1 BIOS Update Utilities GIGABYTE motherboards provide two unique BIOS update tools, Q-Flash ™ and @BIOS ™ . GIGABYTE Q-Flash and @BIOS are easy-to-use and allow you to update the BIOS without the need to enter MS-DOS mode.
Pagina 76

Unique Features - 76 - B. Updating the BIOS In the main menu of Q-Flash, use the keyboard or mouse to select an item to execute. When updating the BIOS,choose the location where theBIOS le is saved.The following procedureassumes that you save the BIOSletoaUSBashdrive.
Pagina 77

- 77 - Unique Features Step 4: During the POST , press <Delete> to enter BIOS Setup. Select Load Optimized Defaults on the Save & Exit screen and press <Enter> to load BIOS defaults. System will re-detect all peripheral devices after a BIOS update, so we recommend that you reload BIOS defaults.
Pagina 78

Unique Features - 78 - 5-1-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin 1. In Windows, close all applications and TSR (T erminate and Stay Resident) programs. This helps prevent unexpected failures when performing a BIOS update.
Pagina 79

- 79 - Unique Features 5-2 APP Center GIGABYTE App Center gives you easy access to a wealth of GIGABYTE apps that help you get the most from your GIGABYTE motherboard (Note) .
Pagina 80

Unique Features - 80 - 5-2-1 EasyT une GIGABYTE's EasyTune is a simple and easy-to-use interface that allows users to ne-tune their system settings or do overclock/overvoltage in Windows environment.
Pagina 81

- 81 - Unique Features 5-2-2 EZ Setup TheGIGABYTEEZSetup utilityincludesthefollowing 'EZ'setupsapplicationsthat willoffergreatlysimplied in.
Pagina 82

Unique Features - 82 - EZ Smart Response A. System Requirements 1. An Intel ® Chipset-based motherboard supporting this feature 2. Intel ® Core series processor 3. Intel ® SA T A controllers set to RAID mode 4. Intel ® Rapid Storage T echnology utility installed (Note1) 5.
Pagina 83

- 83 - Unique Features EZ Rapid Start A. System Requirements 1. Intel ® Rapid Start T echnology enabled in BIOS Setup 2. AnSSDwithsizelargerthanthetotalsystemmemory 3.
Pagina 84

Unique Features - 84 - EZ Smart Connect A. System Requirements 1. Intel ® Smart Connect T echnology enabled in BIOS Setup 2. Windows 7 with SP1/Windows 8 3. Intel ® Smart Connect T echnology utility installed 4. Properly-working network connection 5.
Pagina 85

- 85 - Unique Features XHD With GIGABYTE XHD (Note 1) , users can quickly congure a RAID-ready system for RAID 0 or RAID 1 when a new SA T A drive is added.
Pagina 86

Unique Features - 86 - 5-2-3 USB Blocker GIGABYTE USB Blocker provides you with an easy-to-use interface that allows you to block certain USB device types on your PC.
Pagina 87

- 87 - Unique Features 5-2-4 Smart TimeLock GIGABYTE Smart T imeLock allows users to effectively manage computer usage time with simple rules and options. The Smart TimeLock Interface Using Smart TimeLock Click the lock icon on the bottom left corner and enter the password (Note) .
Pagina 88

Unique Features - 88 - 5-2-5 Smart Recovery 2 SmartRecovery2 allowsyouto backupa partitionasan imageleevery hour .Y oucan usetheseimages to restoreyoursystemorleswhenneeded.
Pagina 89

- 89 - Unique Features Recovering your system with Smart Recovery 2: Steps: 1. Click the System Recovery button on the main menu. 2. Select the location where your backup is saved. 3. Use the time slider to select a time point. 4. Select a partition backup created on the selected time point and click Restore .
Pagina 90

Unique Features - 90 -.
Pagina 91

- 91 - Appendix 6-1 Conguring AudioInputandOutput 6-1-1 Conguring2/4/5.1/7.1-Channel Audio The motherboard provides six audio jacks on the back panel which support 2/4/5.1/7.1-channel  (Note) audio. The picture to the right shows the default audio jack assignments.
Pagina 92

Appendix - 92 - Step 2: Connect an audio device to an audio jack. The The current connected device is dialog box appears. Select the device according to the type of device you connect. Then click OK . Step 3: On the Speakers screen, click the SpeakerConguration tab.
Pagina 93

- 93 - Appendix 6-1-2 ConguringS/PDIFIn/Out A. S/PDIF In TheS/PDIFIncable(optional)allowsyoutoinputdigitalaudiosignalstothecomputerforaudioprocessing. 1. Connecting a S/PDIF In Cable: Connect a S/PDIF in cable to the SPDIF_IN header on the motherboard as shown below .
Pagina 94

Appendix - 94 - B. S/PDIF Out The S/PDIF Out jack can transmit audio signals to an external decoder for decoding to get the best audio quality . On the Digital Output screen, click the Default Format tab and then select the sample rate and bit depth. Click OK to complete.
Pagina 95

- 95 - Appendix Step 3: Go to the Microphone screen. Do not mute the recording volume, or you'll not be able to record the sound. T o hear the sound being recorded during the recording process, do not mute the playback volume. It is recommended that you set the volumes at a middle level.
Pagina 96

Appendix - 96 - * Enabling Stereo Mix If the HD Audio Manager does not display the recording device you wish to use, refer to the steps below. The followingstepsexplainhowtoenableStereoMix(whichmaybeneededwhenyouwanttorecordsound from yourcomputer).
Pagina 97

- 97 - Appendix 6-1-4 Using the Sound Recorder A. Recording Sound 1. Makesureyouhaveconnectedthesoundinputdevice(e.g.microphone)tothecomputer . 2. T o record the audio, click the Start Recording button . 3. T o stop recording audio, click the Stop Recording button .
Pagina 98

Appendix - 98 - 6-2 T roubleshooting 6-2-1 Frequently Asked Questions T o read more F AQs for your motherboard, please go to the Support & DownloadsFAQ page on GIGABYTE's website.
Pagina 99

- 99 - Appendix 6-2-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. ST ART A Turn of f the power. Remove all peripherals, connecting cables, and power cord etc.
Pagina 100

Appendix - 100 - If the procedure above is unable to solve your problem, contact the place of purchase or local dealer for help. Or go to the Support & DownloadsT echnical Support page to submit your question. Our customer service staff will reply you as soon as possible.
Pagina 101

- 101 - Appendix Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a thirdparty norbe usedfor anyunauthorized purpose.
Pagina 102

Appendix - 102 - FCC Notice (U.S.A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Pagina 103

- 103 - Appendix Contact Us • GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New T aipei City 231,T aiwan TEL: +886-2-8912-4000 F AX: +886-2-8912-4005 T ech.andNon-T ech.Support(Sales/Marketing): http://ggts.
Pagina 104

Appendix - 104 - • GIGABYTE Global Service System T osubmit a technicalor non-technical(Sales/Marketing) question, please link to: http://ggts.gigabyte.com.tw Then select your language to enter the system. • G.B.T . TECHNOLOGY TRADING GMBH - Germany WEB address : http://www .

Leggere il manuale d’uso Gigabyte GA-Z87X-SLI - evitare problemi

Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:

per sapere come usare correttamente il dispositivo
per sapere come mantenere ed eseguire controlli periodici del corretto funzionamento del prodotto Gigabyte GA-Z87X-SLI
per sapere come procedere in caso di guasti Gigabyte GA-Z87X-SLI

Se non hai ancora comprato il Gigabyte GA-Z87X-SLI è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Gigabyte GA-Z87X-SLI - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Gigabyte GA-Z87X-SLI imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Gigabyte GA-Z87X-SLI ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.

In una situazione in cui hai già il Gigabyte GA-Z87X-SLI, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Gigabyte GA-Z87X-SLI.

Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Gigabyte GA-Z87X-SLI. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Gigabyte GA-Z87X-SLI insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.

Gigabyte GA-Z87X-SLI manuale d’uso

Condividere URL

Manuali d’uso simili

Condividere URL

Manuali d’uso simili

Sintesi del contenuto nelle pagine seguenti del manuale d’uso

Pagina 1

Pagina 2

Pagina 3

Pagina 4

Pagina 5

Pagina 6

Pagina 7

Pagina 8

Pagina 9

Pagina 10

Pagina 11

Pagina 12

Pagina 13

Pagina 14

Pagina 15

Pagina 16

Pagina 17

Pagina 18

Pagina 19

Pagina 20

Pagina 21

Pagina 22

Pagina 23

Pagina 24

Pagina 25

Pagina 26

Pagina 27

Pagina 28

Pagina 29

Pagina 30

Pagina 31

Pagina 32

Pagina 33

Pagina 34

Pagina 35

Pagina 36

Pagina 37

Pagina 38

Pagina 39

Pagina 40

Pagina 41

Pagina 42

Pagina 43

Pagina 44

Pagina 45

Pagina 46

Pagina 47

Pagina 48

Pagina 49

Pagina 50

Pagina 51

Pagina 52

Pagina 53

Pagina 54

Pagina 55

Pagina 56

Pagina 57

Pagina 58

Pagina 59

Pagina 60

Pagina 61

Pagina 62

Pagina 63

Pagina 64

Pagina 65

Pagina 66

Pagina 67

Pagina 68

Pagina 69

Pagina 70

Pagina 71

Pagina 72

Pagina 73

Pagina 74