Manuale d’uso / di manutenzione del prodotto GA-M720-US3 del fabbricante Gigabyte
Vai alla pagina of 96
GA-M720-US3 AM2+/AM2 socket motherboard for AMD Phenom TM FX processor/AMD Phenom TM X4 processor/ AMD Phenom TM X3 processor/AMD Athlon TM X2 processor/ AMD Athlon TM processor/AMD Sempron TM X2 processor/ AMD Sempron TM processor User's Manual Rev.
Motherboard GA-M720-US3 Dec. 8, 2008 Dec. 8, 2008 Motherboard GA-M720-US3.
Copyright © 2009 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
- 4 - T able of Contents Box Contents ................................................................................................................. 6 Optional Items ..................................................................................
- 5 - Chapter 3 Drivers Installation ...................................................................................... 55 3 - 1 Installing Chipset Dr ivers ............................................................................... 5 5 3 - 2 Software Applications .
- 6 - Box Contents GA-M720-US3 motherboard Motherboard driver disk User's Manual Quick Installation Guide One IDE cable and one floppy disk drive cable T wo SA T A 3Gb/s cables I/O Shield Optional Items 2-port USB 2.0 bracket (Part No. 12CR1-1UB030-5*R) 2-port IEEE 1394a bracket (Part No.
- 7 - GA-M720-US3 Motherboard Layout KB_MS CPU_FAN ATX GA-M720-US3 CD_IN F_AUDIO AUDIO M_BIOS PCIEX16 PCIEX1_1 F_USB2 IDE SPDIF_O DDR2_1 DDR2_3 BATTERY F_PANEL IT8720 ATX_12V PWR_LED FDD PCI2 PCI3 PCI.
- 8 - Block Diagram 1 PCI Express x16 AMD Socket AM2+/AM2 CPU CPU CLK+/-(200 MHz) Hyper Transport 3.0 PCI Bus LPC BUS PCI Express x1 Bus 2 PCI Express x1 x1 PCIe CLK (100 MHz) PCI CLK (33 MHz) 4 PCI L.
Hardware Installation - 9 - 1 - 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD).
GA-M720-US3 Motherboard - 1 0 - 1 - 2 Product Specifications CPU Support for Socket AM2+/AM2 processors: AMD Phenom TM FX processor/AMD Phenom TM X4 processor/ AMD Phenom TM X3 processor/AMD Athlo.
Hardware Installation - 11 - (Note 1) Due to Windows XP 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. (Note 2) Whether 1200 MHz memory speed is supported depends on the CPU being used.
GA-M720-US3 Motherboard - 1 2 - 1 - 3 Installing the CPU and CPU Cooler Read the following guidelines before you begin to install the CPU: • Make sure that the motherboard supports the CPU. (Go to GIGABYTE's website for the latest CPU support list.
Hardware Installation - 13 - Step 2: Align the CPU pin one (small triangle marking) with the triangle mark on the CPU socket and gently insert the CPU into the socket.
GA-M720-US3 Motherboard - 1 4 - Use extreme care when removing the CPU cooler because the thermal grease/tape between the CPU cooler and CPU may adhere to the CPU. Inadequately removing the CPU cooler may damage the CPU. 1-3-2 Installing the CPU Cooler Follow the steps below to correctly install the CPU cooler on the CPU.
Hardware Installation - 15 - 1 - 4 Installing the Memory Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory. It is recommended that memory of the same capacity, brand, speed, and chips be used.
GA-M720-US3 Motherboard - 1 6 - 1-4-2 Installing a Memory Notch Before installing a memory module , make sure to turn off the computer and unplug the power cord from the power outlet to prevent damage to the memory module. DDR2 DIMMs are not compatible to DDR DIMMs.
Hardware Installation - 17 - 1 - 5 Installing an Expansion Card Read the following guidelines before you begin to install an expansion card: • Make sure the motherboard supports the expansion card. Carefully read the manual that came with your expansion card.
GA-M720-US3 Motherboard - 1 8 - 1 - 6 Back Panel Connectors • When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard. • When removing the cable, pull it straight out from the connector.
Hardware Installation - 19 - In addition to the default speakers settings, the ~ audio jacks can be reconfigured to perform different functions via the audio software. Only microphones still MUST be connected to the default Mic in jack ( ). Refer to the instructions on setting up a 2/4/5.
GA-M720-US3 Motherboard - 2 0 - 1 - 7 Internal Connectors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer.
Hardware Installation - 21 - ATX_12V: Pin No. Definition 1 GND 2 GND 3 +12V 4 +12V ATX_12V 1 3 2 4 ATX: Pin No. Definition 13 3.3V 14 -12V 15 GND 1 6 PS_ON(soft On/Off) 17 GND 18 GND 19 GND 20 -5V 21 +5V 22 +5V 2 3 +5V (Only for 2x12-pin A TX) 24 GND (Only for 2x12-pin A TX) Pin No.
GA-M720-US3 Motherboard - 2 2 - 6 ) FDD (Floppy Disk Drive Connector) This connector is used to connect a floppy disk drive. The types of floppy disk drives supported are: 360 KB, 720 KB, 1.2 MB, 1.44 MB, and 2.88 MB. Before connecting a floppy disk drive, be sure to locate pin 1 of the connector and the floppy disk drive cable.
Hardware Installation - 23 - 7 ) IDE (IDE Connector) The IDE connector supports up to two IDE devices such as hard drives and optical drives. Before attaching the IDE cable, locate the foolproof groove on the connector.
GA-M720-US3 Motherboard - 2 4 - 9 ) PWR_LED (System Power LED Header) This header can be used to connect a system power LED on the chassis to indicate system power status. The LED is on when the system is operating. The LED keeps blinking when the system is in S1 sleep state.
Hardware Installation - 25 - 1 1 ) F_P ANEL (Front Panel Header) Connect the power switch, reset switch, speaker and system status indicator on the chassis front panel to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.
GA-M720-US3 Motherboard - 2 6 - 1 3) CD_IN (CD In Connector) Y ou may connect the audio cable that came with your optical drive to the header . Pin No. Definition 1 CD-L 2 GND 3 GND 4 CD-R 1 2 ) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel H igh D efinition audio (HD) and AC'97 audio.
Hardware Installation - 27 - 1 5) F_USB1/F_USB2 (USB Headers, Y ellow) The headers conform to USB 2.0/1.1 specification. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer.
GA-M720-US3 Motherboard - 2 8 - 1 6 ) F1_1394 (IEEE 1394a Header, Gray) The header conforms to IEEE 1394a specification. The IEEE 1394a header can provide one IEEE 1394a port via an optional IEEE 1394a bracket. For purchasing the optional IEEE 1394a bracket, please contact the local dealer.
Hardware Installation - 29 - 1 8) CI (Chassis Intrusion Header) This motherboard provides a chassis detection feature that detects if the chassis cover has been removed. This function requires a chassis with chassis intrusion detection design. Pin No.
GA-M720-US3 Motherboard - 3 0 -.
- 3 1 - BIOS Setup Chapter 2 BIOS Setup BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving system parameters and loading operating system, etc.
GA-M720-US3 Motherboard - 3 2 - 2 - 1 Startup Screen The following screens may appear when the computer boots. A. The LOGO Screen (Default) Function Keys: <T AB>: POST SCREEN Press the <T ab> key to show the BIOS POST screen.
- 3 3 - BIOS Setup 2 - 2 The Main Menu Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu.
GA-M720-US3 Motherboard - 3 4 - The Functions of the <F1 1> and <F12> keys (For the Main Menu Only) F1 1 : Save CMOS to BIOS This function allows you to save the current BIOS settings to a profile. Y ou can create up to 8 profiles (Profile 1-8) and name each profile.
- 3 5 - BIOS Setup 2 - 3 MB Intelligent T weaker(M.I.T .) • Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system configurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components.
GA-M720-US3 Motherboard - 3 6 - Robust Graphics Booster Enables or disables the control of VGA Core clock. VGA Core Clock Allows you to alter the core clock for the graphics chip and is configurable only if the Robust Graphics Booster option is set to Enabled .
- 3 7 - BIOS Setup DDRII Timing Items Manual allows all DDRII Timing items below to be configurable. Options are: Auto (default), Manual. CAS# latency Options are: Auto (default), 3T~6T. RAS to CAS R/W Delay Options are: Auto (default), 3T~6T. Row Precharge Time Options are: Auto (default), 3T~6T.
GA-M720-US3 Motherboard - 3 8 - (Note) This item is present only if you install a CPU that supports this feature. ******** System V oltage Optimized ******** System V oltage Control Determines whether to manually set the system voltages. Auto lets BIOS automatically set the system voltages as required.
- 3 9 - BIOS Setup 2 - 4 Standard CMOS Features Date Sets the system date. The date format is week (read-only), month, date and year. Select the desired field and use the up arrow or down arrow key to set the date. Time Sets the system time. For example, 1 p.
GA-M720-US3 Motherboard - 4 0 - The following fields display your hard drive specifications. If you wish to enter the parameters manually, refer to the information on the hard drive. Capacity Approximate capacity of the currently installed hard drive.
- 4 1 - BIOS Setup 2 - 5 Advanced BIOS Features Virtualization Virtualization allows a platform to run multiple operating systems and applications in independent partitions. With virtualization, one computer system can function as multiple virtual systems.
GA-M720-US3 Motherboard - 4 2 - Password Check Specifies whether a password is required every time the system boots, or only when you enter BIOS Setup. After configuring this item, set the password(s) under the Set Supervisor/User Password item in the BIOS Main Menu.
- 4 3 - BIOS Setup 2 - 6 Integrated Peripherals On-Chip IDE Channel Enables or disables the integrated IDE controller. (Default: Enabled) NV SA T A Controller Enables or disables the integrated SA T A controller .
GA-M720-US3 Motherboard - 4 4 - SMART LAN (LAN Cable Diagnostic Function) CMOS Setup Utility-Copyright (C) 1984-2008 A ward Software SMART LAN Item Help Menu Level Start detecting at Port.
- 4 5 - BIOS Setup Onboard LAN Boot ROM Allows you to decide whether to activate the boot ROM integrated with the onboard LAN chip. (Default: Disabled) Onboard Serial Port Enables or disables the first serial port and specifies its base I/O address and corresponding interrupt.
GA-M720-US3 Motherboard - 4 6 - 2 - 7 Power Management Setup ACPI Suspend T ype Specifies the ACPI sleep state when the system enters suspend. S1(POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1 sleep state, the system appears suspended and stays in a low power mode.
- 4 7 - BIOS Setup (Note) Supported on Windows ® Vista ® operating system only. USB Resume from Suspend Allows the system to be awakened from ACPI S3 sleep state by a wake-up signal from the installed USB device. (Default: Enabled) Power-On by Alarm Determines whether to power on the system at a desired time.
GA-M720-US3 Motherboard - 4 8 - 2 - 8 PnP/PCI Configurations PCI1 IRQ Assignment Auto BIOS auto-assigns IRQ to the first PCI slot. (Default) 3,4,5,7,9,10,1 1,12,14,15 Assigns IRQ 3,4,5,7,9,10,1 1,12,14,15 to the first PCI slot. PCI2 IRQ Assignment Auto BIOS auto-assigns IRQ to the second PCI slot.
- 4 9 - BIOS Setup 2 - 9 PC Health Status Reset Case Open Status Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of previous chassis intrusion status and the Case Opened field will show "No" at next boot.
GA-M720-US3 Motherboard - 5 0 - Current V oltage(V) Vcore/DDR2 1.8V/+3.3V/+12V Displays the current system voltages. Current System/CPU T emperature Displays current system/CPU temperature. Current CPU/SYSTEM/POWER F AN Speed (RPM) Displays current CPU/system/power fan speed.
- 5 1 - BIOS Setup 2-10 Load Fail-Safe Defaults Press <Enter> on this item and then press the <Y> key to load the safest BIOS default settings. In case system instability occurs, you may try to load Fail-Safe defaults, which are the safest and most stable BIOS settings for the motherboard.
GA-M720-US3 Motherboard - 5 2 - 2-12 Set Supervisor/User Password Press <Enter> on this item and type the password with up to 8 characters and then press <Enter>. Y ou will be requested to confirm the password. Type the password again and press <Enter>.
- 5 3 - BIOS Setup 2-13 Save & Exit Setup 2-14 Exit Without Saving Press <Enter> on this item and press the <Y> key. This saves the changes to the CMOS and exits the BIOS Setup program. Press <N> or <Esc> to return to the BIOS Setup Main Menu.
GA-M720-US3 Motherboard - 5 4 -.
Drivers Installation - 55 - Chapter 3 Drivers Installation • Before installing the drivers, first install the operating system. (The following instructions use Windows Vista as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive.
GA-M720-US3 Motherboard - 5 6 - 3 -2 Software Applications This page displays all the tools and applications that GIGABYTE develops and some free software. Y ou may press the Install button following an item to install it. 3 - 3 Driver CD Information This page provides information about the drivers, applications and tools in this driver disk.
Drivers Installation - 57 - 3 -4 Hardware Information This page provides information about the hardware devices on this motherboard. 3- 5 Contact Us For the detailed contact information of the GIGABYTE T aiwan headquarter or worldwide branch offices, click the URL on this page to link to the GIGABYTE Website.
GA-M720-US3 Motherboard - 5 8 -.
Unique Features - 59 - Chapter 4 Unique Features 4 -1 Xpress Recovery2 "* " Xpress Recovery2 checks the first physical hard drive in the following sequence: The first P AT A IDE connector, the second P A T A IDE connector , the first SAT A connector , the second SAT A connector and so forth.
GA-M720-US3 Motherboard - 6 0 - Step 3: When partitioning your hard drive, make sure to leave unallocated space (10 GB or more is recommended; actual size requirements vary, depending on the amount of data) and begin the installation of the operating system.
Unique Features - 61 - E. Removing the Backup D. Using the Restore Function in Xpress Recovery2 F. Exiting Xpress Recovery2 Select REBOOT to exit Xpress Recovery2. Select RESTORE to restore the backup to your hard drive in case the system breaks down.
GA-M720-US3 Motherboard - 6 2 - 4-2-1 Updating the BIOS with the Q-Flash Utility A. Before Y ou Begin: 1 . From GIGABYTE's website, download the latest compressed BIOS update file that matches your motherboard model. 2. Extract the file and save the new BIOS file (e.
Unique Features - 63 - B. Updating the BIOS When updating the BIOS, choose the location where the BIOS file is saved. The follow procedure assumes that you save the BIOS file to a floppy disk. Step 1: 1. Insert the floppy disk containing the BIOS file into the floppy disk drive.
GA-M720-US3 Motherboard - 6 4 - Step 6: Select Save & Exit Setup and then press <Y> to save settings to CMOS and exit BIOS Setup. The procedure is complete after the system restarts. Press <Y> to load BIOS defaults Step 4: Press <Esc> and then <Enter> to exit Q-Flash and reboot the system.
Unique Features - 65 - 4-2-2 Updating the BIOS with the @BIOS Utility A. Before Y ou Begin: 1 . In Windows, close all applications and TSR (T erminate and Stay Resident) programs. This helps prevent unexpected failures when performing a BIOS update. 2 .
GA-M720-US3 Motherboard - 6 6 - 4 - 3 EasyT une 6 GIGABYTE's EasyTune 6 is a simple and easy-to-use interface that allows users to fine-tune their system settings or do overclock/overvoltage in Windows environment.
Unique Features - 67 - 4 - 4 Easy Energy Saver GIGABYTE Easy Energy Saver (Note 1) is a revolutionary technology that delivers unparalleled power savings with a click of the button.
GA-M720-US3 Motherboard - 6 8 - T otal Mode - Button Information T able B. T otal Mode In T otal Mode, users are able to see how much total power savings they have accumulated in a set period of time since activating Easy Energy Saver for the first time (Note 4) .
Appendix - 69 - Chapter 5 Appendix (Note 1) Skip this step if you do not want to create RAID array on the SA T A controller . (Note 2) Required when the SA TA controller is set to AHCI or RAID mode. 5 - 1 Configuring SA T A Hard Drive(s) T o configure SA T A hard drive(s), follow the steps below: A .
GA-M720-US3 Motherboard - 7 0 - B. Configuring SA T A controller mode in BIOS Setup Make sure to configure the SA T A controller mode correctly in system BIOS Setup . Step 1: T urn on your computer and press <Delete> to enter BIOS Setup during the POST (Power-On Self-T est).
Appendix - 71 - C. Configuring RAID set in RAID BIOS Enter the RAID BIOS setup utility to configure a RAID array. For a non-RAID configuration, please skip this step and proceed to the installation of Windows operating system.
GA-M720-US3 Motherboard - 7 2 - Step 6: After assigning the RAID drives, press <F7>. A message which says "All data on new(or added) disks may be overwritten. Continue?" appears (Figure 5). T o overwrite the data in the selected hard drives, press <Y> to confirm or press <N> to cancel.
Appendix - 73 - T o read more information about the RAID array , press <Enter> to enter the Array Detail screen (Figure 7), which shows various information about the array, including the RAID mode, stripe block size, hard drive model name, and hard drive capacity, etc.
GA-M720-US3 Motherboard - 7 4 - 5-1-2 Making a SAT A RAID/AHCI Driver Diskette for W indows XP (Required for AHCI and RAID Mode) T o successfully install operating system onto SA TA hard drive(s) that is/are configured to RAID/AHCI mode, you need to install the SA T A controller driver during the OS installation.
Appendix - 75 - Figure 1 Step 2: The screen displays two drivers, both of which need to be installed. First select NVIDIA RAID Driver and press <Enter>. On the next screen, press <S> to return to the screen in Figure 2. Then select NVIDIA nForce Storage Controller and press <Enter>.
GA-M720-US3 Motherboard - 7 6 - B. Installing Windows Vista (The procedure below assumes that only one RAID array exists in your system.) Step 1: Restart your system to boot from the Windows Vista setup disk and perform standard OS installation steps.
Appendix - 77 - Step 4: After the driver is loaded, the screen will show the RAID hard drive. Select the RAID hard drive onto which you want to install the operating system and then press Next to continue the OS installation (Figure 6).
GA-M720-US3 Motherboard - 7 8 - Rebuilding an Array: Rebuilding is the process of restoring data to a hard drive from other drives in the array. Rebuilding applies only to fault-tolerant arrays such as RAID 1, RAID 0+1, or RAID 5 arrays. The procedures below assume a new drive is added to replace a failed drive to rebuild a RAID 1 array.
Appendix - 79 - High Definition Audio (HD Audio) HD Audio includes multiple high quality digital-to-analog converters (DACs) that support 44.1KHz/ 48KHz/ 96KHz/192KHz sampling rate. HD Audio features multistreaming capabilities that allow multiple audio streams (in and out) to be simultaneously processed.
GA-M720-US3 Motherboard - 8 0 - Step 2: Connect an audio device to an audio jack. The The current connected device is dialog box appears. Select the device according to the type of device you connect. Then click OK . Step 3: On the Speakers screen, click the Speaker Configu- ration tab.
Appendix - 81 - 5-2-2 Configuring S/PDIF Out S/PDIF Out: The S/PDIF out jacks can transmit audio signals to an external decoder for decoding to get the best audio quality. 1. Conneting a S/PDIF Out Cable 2. Configuring S/PDIF Out: On the Digital Output screen, click the Default Format tab and then select the sample rate and bit depth.
GA-M720-US3 Motherboard - 8 2 - 5-2-3 Configuring Microphone Recording Step 1: After installing the audio driver, the HD Audio Manager icon will appear in the notification area.
Appendix - 83 - Step 5: After completing the settings above, click Start , point to Programs , point to Accessories , and then click Sound Recorder to begin the sound recording.
GA-M720-US3 Motherboard - 8 4 - Step 4: Now you can access the HD Audio Manager to configure Stereo Mix and use Sound Recorder to record the sound. Step 3: When the Stereo Mix item appears, right-click on this item and select Enable . Then set it as the default device.
Appendix - 85 - 5 - 3 T roubleshooting 5-3-1 Frequently Asked Questions T o read more FAQs for your motherboard, please go to the SupportMotherboardF AQ page on GIGABYTE's website. Q : In the BIOS Setup program, why are some BIOS options missing? A : Some advanced options are hidden in the BIOS Setup program.
GA-M720-US3 Motherboard - 8 6 - 5-3-2 T roubleshooting Procedure If you encounter any troubles during system startup, follow the troubleshooting procedure below to solve the problem. Turn off the power. Remove all peripherals, connecting cables, and power cord etc.
Appendix - 87 - No Ye s Check if there is display on your monitor. Ye s When the computer is turned on, is the CPU cooler running? No The graphics card, expansion slot, or monitor might fail. Turn off the computer. Plugg in the keyboard and mouse and restart the computer.
GA-M720-US3 Motherboard - 8 8 - 5 -4 Regulatory Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
Appendix - 89 - Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly.
GA-M720-US3 Motherboard - 9 0 -.
Appendix - 91 -.
GA-M720-US3 Motherboard - 9 2 -.
Appendix - 93 -.
GA-M720-US3 Motherboard - 9 4 -.
Appendix - 95 - Contact Us GIGA-BYTE TECHNOLOGY CO., LTD. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei 231, T aiwan TEL: +886-2-8912-4000 FAX: +886-2-8912-4003 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.
GA-M720-US3 Motherboard - 9 6 - T o submit a technical or non-technical (Sales/ Marketing) question, please link to : http://ggts.gigabyte.com.tw Then select your language to enter the system. GIGABYTE Global Service System G.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Gigabyte GA-M720-US3 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Gigabyte GA-M720-US3 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Gigabyte GA-M720-US3 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Gigabyte GA-M720-US3 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Gigabyte GA-M720-US3, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Gigabyte GA-M720-US3.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Gigabyte GA-M720-US3. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Gigabyte GA-M720-US3 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
