Manuale d’uso / di manutenzione del prodotto GA-J1900N-D3V (rev. 1.0) del fabbricante Gigabyte
Vai alla pagina of 32
GA-J1900N-D3V User's Manual Rev . 1001 1 2 ME-J 1 90 D3 V - 1 00 1 R.
Motherboard GA-J1900N-D3V Jan. 3, 2014 Jan. 3 , 2014 Motherboard GA- J1 90 0N - D3V Copyright © 2014 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE.
T able of Contents GA - J 190 0 N - D3V Mother board L ayout ............................................................................ 4 GA - J 190 0 N - D3V Mother board Bl ock D iagram .............................................................
GA- J 1900N - D3V Mothe rb oard Layout Box Contents 5 GA-J1900N-D3V motherboard 5 Motherboard driver disk 5 T wo SA T A cables 5 User's Manual 5 I/O Shield The box contents above are for reference only and the actual items shall depend on the product package you obtain.
GA- J 1 90 0N - D3 V Moth erboard Block Diagram Fordetailedproductinformation/limitation(s),referto"1-2ProductSpecications.
- 6 - Chapter 1 Hardware Installation 1- 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD).
- 7 - 1- 2 P roductSpe cications CPU Built in with an Intel ® Celeron ® Quad-Core J1900 SoC (2.0 GHz) * Do not disassemble the onboard SoC and the heatsink by yourself to avoid damage to these components. 2 MB Cache Memory 2 x 1.
- 8 - Internal Connectors 1 x parallel port header 1 x Clear CMOS jumper 1 x chassis intrusion header 1 x debug card header Back Panel Connectors 1 x PS/2 keyboard port 1 x PS/2 mouse port 1 x D-Sub port 1 x DVI-D port 2 x serial ports 4 x USB 3.
- 9 - 1-3 Installing the Memor y Read the following guidelines before you begin to install the memory: • Make sure that the motherboard supports the memory . It is recommended that memory of the same capacity , brand, speed, and chips be used. (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.
- 10 - T o congure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver . Line In Jack (Blue) The line out jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
- 1 1 - 1-6 Internal Connec tors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer .
- 12 - 1/2) A TX_12V/A TX (2x2 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components onthe motherboard.
- 13 - Pin No. Denition 1 GND 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND 5) SA T A2 0/1 (SA T A 3Gb/s Connectors) The SA T A connectors conform to SA T A 3Gb/s standard and are compatible with SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device.
- 14 - 7) F_AUDIO (Front Panel Audio Header) Thefrontpanel audio headersupports IntelHigh Denitionaudio (HD)and AC'97audio. Y oumay connect your chassis front panel audio module to this header .
- 15 - 1 1) BA T (Battery) Thebatteryprovides powertokeepthevalues(suchasBIOScongurations,date,andtimeinformation) in the CMOS when the computer is turned off. Replace the battery when the battery voltage drops to a low level, or the CMOS values may not be accurate or may be lost.
- 16 - 12) CLR_CMOS (Clear CMOS Jumper) Use this jumper to clear the BIOS congurationand reset the CMOS values to factory defaults.T o clear the CMOS values, use a metal object like a screwdriver to touch the two pins for a few seconds.
- 17 - BIOS (Basic Input and Output System) records hardware parameters of the system in the CMOS on the motherboard. Its major functions include conducting the Power-On Self-T est (POST) during system startup, saving system parameters and loading operating system, etc.
- 18 - 2- 2 Main Once you enter the BIOS Setup program, the Main Menu (as shown below) appears on the screen. Use arrow keys to move among the items and press <Enter> to accept or enter a sub-menu. Main Menu Help The on-screen description of a highlighted setup option is displayed on the bottom line of the Main Menu.
- 19 - 2-3 Advanced ` Intel(R) Smart Connect T echnology & ISCT Support Enables or disables Intel ® Smart Connect T echnology. (Default: Disabled) ` SuperIOConguration This se.
- 20 - & ErP Determines whether to let the system consume least power in S5 (shutdown) state. (Default: Disabled) Note: When this item is set to Enabled , the following functions will become unavailable: PME event wake up, power on by mouse, power on by keyboard, and wake on LAN.
- 21 - ` PPMConguration & EIST Enables or disables Enhanced Intel ® Speed Step T echnology (EIST). Depending on CPU loading, Intel EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production.
- 22 - ` NetworkStackConguration & Network Stack Disables or enables booting from the network to install a GPT format OS, such as installing the OS from the Windows Deployment Services server . (Default: Disabled) & Ipv4 PXE Support EnablesordisablesIPv4PXESupport.
- 23 - & Other PCI devices Allows you to select whether to enable the UEFI or Legacy option ROM for the PCI device controller other than the LAN, storage device, and graphics controllers. UEFIFirst EnablesUEFIoptionROMrst.
- 24 - 2- 4 Chipset & Realtek LAN Controller / Realtek LAN 2 Controller Enables or disables the onboard LAN function. (Default: Enabled) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled.
- 25 - & High Precision Timer Enables or disables High Precision Event Timer (HPET) in the operating system. (Default: Enabled) & Restore AC Power Loss Determines the state of the system after the return of power from an AC power loss. Power Off The system stays off upon the return of the AC power .
- 26 - T o cancel the password, press <Enter> on the password item and when requested for the password, enter thecorrectonerst. Whenpromptedfora newpassword,press<Enter> withoutenteringanypassword.
- 27 - & VGA Support Allows you to select which type of operating system to boot. Auto Enables legacy option ROM only . EFI Driver Enables EFI option ROM. (Default) Thisitemiscongurableonlywhen Fast Boot is set to Enabled .
- 28 - & Save Changes and Reset Press <Enter> on this item and select Ye s . This saves the changes to the CMOS and exits the BIOS Setup program. Select No or press <Esc> to return to the BIOS Setup Main Menu. & Discard Changes and Reset Press <Enter> on this item and select Ye s .
- 29 - Chapter 3 Appendix • Before installing the drivers, rst install the operating system. (The following instructions use Windows 8 as the example operating system.) • After installing the operating system, insert the motherboard driver disk into your optical drive.
- 30 - Regulator y Statement s Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted.
- 31 - FCC Notice (U.S.A. Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 32 - Conta ct Us GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bao Chiang Road, Hsin-Tien Dist., New T aipei City 231,T aiwan TEL: +886-2-8912-4000, F AX: +886-2-8912-4005 T ech. and Non-T ech. Support (Sales/Marketing) : http://ggts.gigabyte.com.tw WEB address (English): http://www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Gigabyte GA-J1900N-D3V (rev. 1.0) è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Gigabyte GA-J1900N-D3V (rev. 1.0) - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Gigabyte GA-J1900N-D3V (rev. 1.0) imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Gigabyte GA-J1900N-D3V (rev. 1.0) ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Gigabyte GA-J1900N-D3V (rev. 1.0), ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Gigabyte GA-J1900N-D3V (rev. 1.0).
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Gigabyte GA-J1900N-D3V (rev. 1.0). Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Gigabyte GA-J1900N-D3V (rev. 1.0) insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
