Manuale d’uso / di manutenzione del prodotto HFT2SYS-500 del fabbricante Alto-Shaam
Vai alla pagina of 26
W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 USA PHONE: 262.251.3800 • 800.558.8744 USA / CANADA FAX: 262.251.7067 • 800.
Delivery ...................................... 1 Unpacking .................................... 1 Safety Procedures and Precautions ................. 2 Installation Installation Requirements ...................... 3 Leveling .........................
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 1. DELIVERY This Alto-Shaam appliance has been thoroughly tested and inspected to ensure only the highest quality unit is provided. Upon receipt, check for any possible shipping damage and report it at once to the delivering carrier.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 2. NOTE For equipment delivered for use in any location regulated by the following directive: DO NOT DISPOSE OF ELECTRICAL OR ELECTRONIC EQUIPMENT WITH OTHER MUNICIPAL WASTE. 1. This appliance is intended to hold foods for the purpose of human consumption.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 3. SITE INSTALLATION INSTALLATION SITE INSTALLATION In order to maintain established National Sanitation Foundation standards, all stationary floor models must be sealed to the floor with a R.T.V. or silastic meeting N.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 4. SITE INSTALLATION INSTALLATION 48" (1220mm) 43-13/16" (1 1 13mm) 12-1/2" (318mm) T op Surface 20-1/8" (509mm) 26-1/8" (663mm) 4-7/16" ( 111 mm) Well 12-3/4" (322mm) Opening 9-13/16" (248mm) To Well 20-1/8" (512mm) 13" (331mm) To Elec.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 5. SITE INSTALLATION INSTALLATION 12- 11 /16" (322mm) Opening 34-3/8" (872mm) 4-7/16" ( 111 mm) Well 13" (331mm) To Elec.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 6. SITE INSTALLATION INSTALLATION 12-1/2" (318mm) T op Surface 59-1/2" (1512mm) T op Surface 51" (1296mm) Well TOP VIEW 60" (1525mm) 27-15/16" (709mm) 4-1/8" (104mm) To Elec.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 7. SITE INSTALLATION INSTALLATION 12-1/2" (318mm) T op Surface 71-7/16" (1814mm) T op Surface 64-1/8" (1628mm) Well TOP VIEW 72" (1830mm) 33-15/16" (861mm) 4-1/8" (104mm) To Elec.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 8. capacities • options INSTALLATION OPTIONS AND ACCESSORIES Panel Color Choices see service parts Pan Dividers, Full Size 16019 Pan Dividers, Half and Third Size 11318 PRODUCT/PAN CAPACITY - Based on 4" (65mm) deep pans HFT2-400, HFTSYS-400 96 lb (44 kg) maximum max .
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 9. ELECTRICAL CONNECTION INSTALLATION The appliance must be installed by a qualified service technician. The oven must be properly grounded in accordance with the National Electrical Code and applicable local codes.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 10. USER SAFETY INFORMATION: This appliance is intended for use in commercial establishments by qualified personnel who are familiar with the purpose, limitations, and associated hazards of this appliance.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 11. 1. DO NOT ADD WATER TO HOT WELL Halo Heat ® hot wells maintain a constant and gentle temperature. Adding water is not recommended since water will accelerate the deterioration of the product and may damage the unit voiding the warranty.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 12. Chefs, cooks and other specialized food service personnel employ varied methods of cooking. Proper holding temperatures for a specic food product must be based on the moisture content of the product, product density, volume, and proper serving temperatures.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 13. CARE AND CLEANING PROTECTING STAINLESS STEEL SURFACES It is important to guard against corrosion in the care of stainless steel surfaces. Harsh, corrosive, or inappropriate chemicals can completely destroy the protective surface layer of stainless steel.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 14. EQUIPMENT CARE The cleanliness and appearance of this equipment will contribute considerably to operating efficiency and savory, appetizing food. Good equipment that is kept clean works better and lasts longer.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 15. Food avor and aroma ar e usually so closely related that it is dif cult, if not impossible, to separate them. There is also an important, inseparable relationship between cleanliness and food avor .
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 16. SERVICE 1 2 1 2 3 4 5 6 SERVICE PARTS MODEL > HFT2-300 HFT2-400 HFT2-500 ITEM DESCRIPTION PART NO.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 17. SERVICE SERVICE PARTS LIST - PANEL COLORS, BASKETS 2 1 3 1 3 4 Part numbers and drawings are subject to change without notice. MODEL > HFT2-300 HFT2-400 HFT2-500 ITEM DESCRIPTION PART NO. QTY PART NO.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 18. 26 13 8 1 7 9 1 23 17 2 27 13 26 16 10 18 6 27 21 19 31 20 31 20 17 12 14 27 25 14 16 24 4 22 19 4 3 5 30 29 11 SERVICE Part numbers and drawings are subject to change without notice.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 19. MODEL > HFT2-300 HFT2-400 HFT2-500 ITEM DESCRIPTION PART NO. QTY PART NO. QTY PART NO. QTY 1 INNER TOP LIGHT END 1007098 2 1007098 2 1007098 2 2 T.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 20. A 2 4 4 3 7 1 1 12 10 8 7 9 6 A 13 5 1 14 SERVICE Part numbers and drawings are subject to change without notice.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 21. SERVICE SERVICE PARTS LIST - BASE MODEL > HFT2-300 HFT2-400 HFT2-500 ITEM DESCRIPTION PART NO. QTY PART NO.
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 22..
HFT2 INSTALLATION/OPERATION/SERVICE MANUAL • 23..
TRANSPORTATION DAMAGE and CLAIMS All Alto-Shaam equipment is sold F.O.B. shipping point, and when accepted by the carrier, such shipments become the property of the consignee. Should damage occur in shipment, it is a matter between the carrier and the consignee.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Alto-Shaam HFT2SYS-500 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Alto-Shaam HFT2SYS-500 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Alto-Shaam HFT2SYS-500 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Alto-Shaam HFT2SYS-500 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Alto-Shaam HFT2SYS-500, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Alto-Shaam HFT2SYS-500.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Alto-Shaam HFT2SYS-500. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Alto-Shaam HFT2SYS-500 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
