Manuale d’uso / di manutenzione del prodotto 62s del fabbricante Garmin
Vai alla pagina of 56
GPSMAP ® 62 series owner ’ s manual For use with the GPSMAP 62, 62s and, 62st.
All rights reserved. Except as expressly provided herein, no part of this manual may be reproduced, copied, transmitted, disseminated, downloaded or stored in any storage medium, for any purpose without the express prior written consent of Garmin.
T able of Contents Getting Started .................... 1 Manual Conventions .................. 1 Device Overview........................ 2 Battery Information .................... 2 Installing the Batteries ............... 3 T urning the Device On or Of f .
Data Field Options ................... 22 System Settings....................... 26 Display Settings ....................... 27 Setting Up T ones ..................... 27 Marine Settings........................ 27 Setting up Marine Alarms ........ 28 Resetting Data .
GPSMAP 62 Series Owner ’s Manual 1 Getting Started Getting Started ‹ W ARNING See the Important Safety and Pr oduct Information guide in the product box for product warnings and other important information When using your device the rst time, you should complete the following tasks to set up the device and get to know the basic features.
2 GPSMAP 62 Series Owner’s Manual Getting Started Device Overview 1 2 3 4 5 7 6 8 1 Internal antenna 2 Display 3 Buttons ( page 4 ) 4 5 mini-USB port (under weather cap) 6 MCX connector for GPS antenna (under weather cap). A vailable only on the GPSMAP 62s and the GPSMAP 62st.
GPSMAP 62 Series Owner ’s Manual 3 Getting Started NiMH or lithium batteries for best results ( page 37 ). Installing the Batteries 1. Remove the battery cover by turning the D-ring 1/4 turn counter- clockwise and pulling up. 2. Insert the batteries, observing polarity .
4 GPSMAP 62 Series Owner’s Manual Getting Started strength. When the bars are green, the device has acquired satellite signals. Buttons FIND Press FIND to open the search menu. MARK Press MARK to save your current location as a waypoint. QUIT Press QUIT to cancel or return to the previous menu or page.
GPSMAP 62 Series Owner ’s Manual 5 Navigating with W aypoints and Routes Navigating with W aypoints and Routes W aypoints W aypoints are locations you record and store in the device. Creating W aypoints 1. From any page, press MARK . 2. Select Done .
6 GPSMAP 62 Series Owner’s Manual Navigating with W aypoints and Routes Routes A route is a sequence of waypoints that leads you to your nal destination. Y our device can store up to 50 routes with up to 250 points each. Creating a Route 1. From the main menu, select Route Planner > Create Route > Select First Point .
GPSMAP 62 Series Owner ’s Manual 7 Navigating with W aypoints and Routes Insert —adds an additional point on the route. The additional point is inserted before the point you are editing. Remove —removes the point from the route. Viewing a Route on the Map 1.
8 GPSMAP 62 Series Owner’s Manual Navigating with W aypoints and Routes Additional Maps T o purchase preloaded detailed map data cards, go to http://buy .garmin.com or contact your Garmin dealer . Finding an Address with City Navigator ® Y ou can use optional City Navigator maps to search for addresses, cities, and other locations.
GPSMAP 62 Series Owner ’s Manual 9 T racks T racks About T racks Y our Garmin device records a track log while you are moving. Y ou can save these tracks and navigate to them later . Y ou can view archived or loaded tracks by selecting T rack Manager from the main menu.
10 GPSMAP 62 Series Owner ’s Manual T racks Viewing the Current T rack The track being recorded is called the current track. 1. From the main menu, select T rack Manager > Current T rack . 2. Select an option: V iew Map —shows the current track on the map.
GPSMAP 62 Series Owner ’s Manual 1 1 Using the Main Pages Using the Main Pages The information needed to operate this device is found on the following pages: map, compass, main menu, and trip computer . Customizing the Data Fields Y ou can customize the data elds that appear on the main pages.
12 GPSMAP 62 Series Owner ’s Manual Using the Main Pages Measuring Distance Y ou can move the cursor around the map to measure distance from the current location. 1. From the map, press MENU . 2. Select Measure Distance . The device automatically begins measuring from your current location.
GPSMAP 62 Series Owner ’s Manual 13 Using the Main Pages Map Information —allows you to enable or disable the maps currently loaded on the device. T o purchase additional maps, see page 38 . Compass When navigating to a destination, the bearing pointer points to your destination, regardless of the direction you are moving.
14 GPSMAP 62 Series Owner ’s Manual Using the Main Pages Using the Compass Y ou can use the compass to navigate an active route. 1. Press P AGE . 2. Hold the device level. 3. Follow the bearing pointer to your destination. Using Sight ‘N Go NOTE : Sight ‘N Go is available only with the GPSMAP 62s and GPSMAP 62st.
GPSMAP 62 Series Owner ’s Manual 15 Using the Main Pages Grid —sets grid north as the heading reference (0°). User —sets the magnetic variation value. Go T o Line/Pointer —allows you to select how the course is displayed. Bearing (Small/Large) indicates the direction to your destination.
16 GPSMAP 62 Series Owner ’s Manual Using the Main Pages Elevation Plot Setup Options From the elevation plot, press MENU . Change Plot T ype —sets the type of data shown on the elevation plot: Elevation/Time —records elevation changes over a period of time.
GPSMAP 62 Series Owner ’s Manual 17 Using the Main Pages T rip Computer The trip computer displays your current speed, average speed, maximum speed, trip odometer , and other helpful statistics. T rip Computer Setup Options From the trip computer , press MENU .
18 GPSMAP 62 Series Owner ’s Manual Main Menu Features and Settings Main Menu Features and Settings Geocaches Geocaching is a type of treasure hunting, in which geocachers seek hidden treasures using GPS coordinates posted on the Internet by those hiding the geocache.
GPSMAP 62 Series Owner ’s Manual 19 Main Menu Features and Settings Proximity Alarms Proximity alarms alert you when you are approaching a predetermined area. Setting a Proximity Alarm 1. From the main menu, select Proximity Alarms . 2. Select Create New .
20 GPSMAP 62 Series Owner ’s Manual Main Menu Features and Settings Satellite The satellite page shows your current location, GPS accuracy , satellite locations, and signal strength. Satellite Settings From the satellite page, press MENU . Use W ith GPS On —allows you to turn the GPS on and off.
GPSMAP 62 Series Owner ’s Manual 21 Main Menu Features and Settings Alarm Clock —sets an audible alarm. If you are not currently using the device, you can set the device to turn on at a specic time. Hunt and Fish —displays the predicted best dates and times for hunting and shing at your current location.
22 GPSMAP 62 Series Owner ’s Manual Customizing Y our Device Customizing Y our Device Customizing Data Fields Y ou can customize the data elds displayed on each main page. 1. From a main page, press MENU . 2. Select Change Data Fields . 3. Select a data eld.
GPSMAP 62 Series Owner ’s Manual 23 Customizing Y our Device Data Field Description Depth The depth of the water . Requires a connection to a NMEA 0183 depth-capable device to acquire data ( page 27 ). **Descent - A verage The average vertical distance of descent.
24 GPSMAP 62 Series Owner ’s Manual Customizing Y our Device Data Field Description Location (lat/lon) Displays the current position in the default position format regardless of the selected settings. Location (selected) Displays the current position in the selected position format.
GPSMAP 62 Series Owner ’s Manual 25 Customizing Y our Device Data Field Description T ime to Destination The estimated time needed to reach your nal destination. T ime to Next The estimated time needed until you reach the next waypoint on the route.
26 GPSMAP 62 Series Owner ’s Manual Customizing Y our Device System Settings From the main menu, select Setup > System . GPS —sets the GPS to Normal, W AAS/EGNOS (Wide Area Augmentation System/European Geostationary Navigation Overlay Service), or Demo Mode (GPS of f).
GPSMAP 62 Series Owner ’s Manual 27 Customizing Y our Device Display Settings From the main menu, select Setup > Display . Backlight T imeout —see page 37 .
28 GPSMAP 62 Series Owner ’s Manual Customizing Y our Device Spot Soundings —allows you to turn spot soundings on and set dangerous depths. Light Sectors —displays the sector in which a navigational light is visible.
GPSMAP 62 Series Owner ’s Manual 29 Customizing Y our Device Setting the Deep W ater or Shallow W ater Alarm 1. From the main menu, select Setup > Marine Settings . 2. Select Shallow W ater > On to set an alarm to sound when the depth is less than the specied value.
30 GPSMAP 62 Series Owner ’s Manual Customizing Y our Device Adding a Page 1. From the main menu, select Setup > Page Sequence . 2. Select Add Page . 3. Select a page to add. Removing a Page 1. From the main menu, select Setup > Page Sequence .
GPSMAP 62 Series Owner ’s Manual 31 Customizing Y our Device Position Format —sets the position format in which a given location reading appears. Map Datum —sets the coordinate system on which the map is structured. Map Spheroid —shows the coordinate system the device is using.
32 GPSMAP 62 Series Owner ’s Manual Customizing Y our Device Ambient Pressur e —records ambient pressure changes over a period of time. Geocache Settings From the main menu, select Setup > Geocaches . Geocache List —allows you to show the geocache list by names or codes.
GPSMAP 62 Series Owner ’s Manual 33 Customizing Y our Device Distance —routes you to the next point on the route when you are within a specied distance of your current point. A voidance Setup (requires routable maps)—allows you to select the road type you want to avoid.
34 GPSMAP 62 Series Owner ’s Manual Appendix Appendix Registering Y our Device Help us better support you by completing our online registration today .
GPSMAP 62 Series Owner ’s Manual 35 Appendix In Europe, go to www .garmin.com /support and click Contact Support for in-country support information, or contact Garmin (Europe) Ltd. by phone at +44 (0) 870.8501241. Using the Backlight The backlight is activated any time you press a button.
36 GPSMAP 62 Series Owner ’s Manual Appendix Battery type T wo AA batteries (alkaline, NiMH, or lithium) See page 37 . Battery life Up to 20 hours, typical usage Operating temperature range From 5°F to 158°F (from -15 to 70°C) See page 37 . Radio frequency/ protocol 2.
GPSMAP 62 Series Owner ’s Manual 37 Appendix Decreasing the Backlight Extensive use of screen backlighting can signicantly reduce battery life. Y ou can adjust the backlight brightness and decrease the backlight timeout to maximize battery power .
38 GPSMAP 62 Series Owner ’s Manual Appendix Buying Optional Accessories Go to http://buy .garmin.com , or contact your Garmin dealer for information about optional accessories, preloaded map data cards, tness accessories, and replacement parts.
GPSMAP 62 Series Owner ’s Manual 39 Appendix Tips for Pairing ANT+ Accessories with Y our Garmin Device V erify that the ANT+ accessory is compatible with your Garmin device. Before you pair the ANT+ accessory with your Garmin device, move 10 m away from other ANT+ accessories.
40 GPSMAP 62 Series Owner ’s Manual Appendix purchase preloaded detailed map data cards from your Garmin dealer . In addition to map and data storage, the memory cards can be used to store les such as images, cartridges, geocaches, routes, waypoints, and custom POIs.
GPSMAP 62 Series Owner ’s Manual 41 Appendix 4. Replace the batteries and the battery cover . Connecting the USB Cable notice T o prevent corrosion, thoroughly dry the mini-USB port, the weather cap, and the surrounding area before charging or connecting to a computer .
42 GPSMAP 62 Series Owner ’s Manual Appendix Deleting Files notice Y our device memory contains important system les and folders that should not be deleted. Before you can delete les, you must connect the device to your computer ( page 39 ). 1.
GPSMAP 62 Series Owner ’s Manual 43 Appendix Attaching the Carabiner Clip 1. Position the carabiner clip in the slots on the mounting spine. 2. Slide the clip up until it locks in place. Removing the Carabiner Clip Lift the bottom of the clip and gently push down on the carabiner clip until it releases.
44 GPSMAP 62 Series Owner ’s Manual Appendix T roubleshooting Problem Solution The screen or buttons do not respond. How do I reset the device? 1. Remove the batteries. 2. Reinstall the batteries. NOTE : This does not erase any of your data or settings.
GPSMAP 62 Series Owner ’s Manual 45 Appendix Problem Solution I cannot see any new removable drives in my list of drives. If you have several network drives mapped on your computer , Windows may have trouble assigning drive letters to your Garmin drives.
Index 46 GPSMAP 62 Series Owner ’s Manual Index A accessories 38, 45 tness 38 microSD card 38 acquiring satellite signals 44 active route 7 alarms marine 28 proximity 19 time 21 altimeter calibra.
GPSMAP 62 Series Owner ’s Manual 47 Index screen capture 27 settings 27 downloading software 34 E editing proles 33 routes 6 waypoints 5 elevation plot 10, 15 barometric altimeter 15 reset 16 set.
Index 48 GPSMAP 62 Series Owner ’s Manual power button 3, 4, 35, 37 proles 19 change 19 creating 33 setting 19 proximity alarms 19 Q QUIT button 4 R recording tracks 9 registering your device 34 .
GPSMAP 62 Series Owner ’s Manual 49 Index U unit ID 34 updating software 34 USB cable 44 connecting 41 disconnecting 42 W waypoints averaging 21 creating 5 deleting 5 editing 5 navigating to 5 wrist.
.
.
For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www .garmin.com . © 2010 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151 st Street, Olathe, Kansas 66062, USA Garmin (Europe) Ltd.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Garmin 62s è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Garmin 62s - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Garmin 62s imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Garmin 62s ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Garmin 62s, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Garmin 62s.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Garmin 62s. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Garmin 62s insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
