Manuale d’uso / di manutenzione del prodotto AH 530-790 del fabbricante Gaggenau
Vai alla pagina of 18
1 AH 530-790 AH 530-720 Preface Safety notes Page 3 1. Important notes Page 4-5 1.1 F or your safety Page 4 1.2 Operating for the first time Page 5 1.3 About use Page 5 2. F eatures Page 6 3. Operation Page 7-9 4. Cleaning and care Page 10-1 1 5. Maintenance Page 12 6.
2 Preface With your new extractor hood, working in the kitchen will be even more fun. The appliance offers you a number of advantages: – A good extraction capacity with low noise values, – a large number of control functions, – optimum illumination of the cooking surface by a dimmable halogen light.
W ARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJUR Y TO PERSONS, OBSER VE THE FOLLOWING: a.) Use this unit only in the manner intended by the manufacturer .
1.1 F or your safety – Damaged appliances must not be operated. – The appliance must only be connected by an authorised specialist , paying attention to the relevant regulations of the power supply companies and the regional construction regulations.
1.2 Operating for the first time Before operating the appliance for the first time, please pay attention to the following notes: – The appliance must be installed and connected by a specialist before it is operated for the first time. – The rating plate for this appliance is included with the instructions on a separate sheet.
6 2. F eatures 1 Outgoing air duct 2 Control panel 3 Grease filter 4 Lighting Installation accessories: Stainless steel-design ventilation duct: LK 530-010 for ceiling heights of 7 ´´ 3 ´ ´ - 8 ´´ 6 ´ ´ / 2.20 - 2.66 m LK 530-020 for ceiling heights of 8 ´´ 6 ´ ´ - 10 ´´ 1 ´ ´ / 2.
7 3. Operation The AH 530-790 is 35 3 / 8 ´ ´ / 90 cm wide, and the AH 530-720 is 47 3 / 16 ´ ´ / 120 cm wide. Operation of both extractor hoods is identical. After they have been pressed, all functions selection keys except 0 (“Motor off”) are backlit in green.
8 The Int key for the intensive level should be pressed when browning and frying in an open pan (see Fig. 6). If you have switched on the hood by selecting the intensive level, it will be switched off again automatically after 5 minutes.
9 Special functions: Intensive time: Y ou can set the intensive level running time to 3, 5 or 10 minutes by simultaneously pressing the Int key and the 1, 2 or 3 key and you can store this setting (see Fig. 9). When delivered, the appliance is set to five minutes, i.
10 Cleaning the grease filters The grease filter saturation display F flashes after an operating time of 30 hours to indicate that you should clean the grease filter (see Fig. 3). The grease filter can of course be cleaned at any time, even if the grease filter saturation display should not start to flash.
11 Cleaning the extractor hood Clean the extractor hood and the aluminium- design ventilation ducts (LK 530-01 1/021) with a soft cloth and mild detergent solution only . Clean the stainless-steel design ventilation ducts (LK 530-010/020) with mild detergent solution and apply stainless steel care agent to the metal surface using a soft cloth.
The appliance must be disconnected from the power supply during all repair work. If the appliance does not function correctly , check the fuses first. If the power supply is functioning correctly , bu.
13 6.1 T echnical data AH 530-790: W eight: 23.5 kg Dimensions: 35 3 / 8 ´ ´ x 20 10 / 16 ´´ 898 x 550 mm AH 530-720: W eight: 27.5 kg Dimensions: 47 3 / 16 ´ ´ x 20 10 / 16 ´´ 1 198 x 550 mm Electrical connection Pay attention to the rating plate data.
6.2 Installation W ARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJUR Y TO PERSONS, OBSER VE THE FOLLOWING: a.) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
15 Flexible aluminium pipes, corrosion-protected sheet metal pipes and exhaust air pipes whose material conforms to fire B1 in accordance with DIN 4102 can be used.
16 Proceed as follows: – From the bottom edge of the hood, mark a center line on the wall. – With the aid of the drilling template, mark the positions of the screws on the wall (Fig. 19). – Pay attention to the minimum clearance of 24 ´ ´ / 600 mm for electric cookers and 27 1 / 2 ´ ´ / 700 mm for gas cookers.
– Secure the hood on the wall with the four screws b (Fig. 21). – Establish the pipe connection. – Establish the electrical connection. – Stainless steel chimney only (LK 530-010/020): Pull the protective film off the chimney’s trims. Note: A void damaging the sensitive metal surfaces.
Operating and assembly instructions AH 530-790 AH 530-720 Extractor hood.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Gaggenau AH 530-790 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Gaggenau AH 530-790 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Gaggenau AH 530-790 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Gaggenau AH 530-790 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Gaggenau AH 530-790, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Gaggenau AH 530-790.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Gaggenau AH 530-790. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Gaggenau AH 530-790 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.