Manuale d’uso / di manutenzione del prodotto PDS4234W del fabbricante Fujitsu
Vai alla pagina of 48
Before using the display , read this manual carefully so that you know how to use the display cor rectly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily .
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial P ark, Centennial A venue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu Ge.
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Unit 150, Centennial Park, Centennial A venue Elstree, Hertfordshire, WD6 3SG Manufacturer: Shinjyo Fujitsu Gen.
2 SAFET Y PRECA UTIONS FCC NO TICE • PDS4233W : A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to P art 15 of the FCC Rules.
3 – Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. The product should be mounted according to the manufacturer ’ s instructions, and should use a mount recommended by the manufacturer .
4 FEA TURES This display uses a plasma display panel and is only 8.5 cm deep. With its high picture quality and performance, it is perfectly suited for multimedia applications. V ar iety of input signals • In addition to video, S-video, and RGB, signals, this display supports input of high-quality video signals such as D VD and HDT V.
5 ACCESSORIES Infor mation Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.
6 INS T ALLA TION T o prev ent the display ’ s internal components from o verheating, make sure that the display is installed in a well-v entilated location. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display .
7 PAR T NAMES AND FUNCTIONS Fr ont 1 P ower indicat or lamp This lamp shows the state of the po wer supply . Lit (red): Stand-by Lit (green): Po wer ON Lit (orange): Po wer saving (DPMS: Po wer saving function) mode ON Flashing (red): Malfunction (Flashes dif ferently depending on the type of malfunction.
8 1 Exter nal speak er output ter minal (EXT SP) Connect this terminal to the optionally a vailable speak er. (Use a speak er with 4 to 16 Ω .) *See the speaker instruction manual for more information. 2 Sound 1 input t er minal (AUDIO 1 INPUT) Connect this terminal to the sound output terminal of your VCR, etc.
9 Descr iption of Input T er minals DVI-D terminal (RGB 1 INPUT/D VI-D) Pin No. Input signal Pin No. Input signal 1R e d 9 — 2 Green 1 0 Ground 3 Blue 1 1 — 4 — 12 — 5 Ground 13 Horizontal sync hronization 6 Ground 1 4 V ertical sync hronization 7 Ground 15 — 8 Ground Frame Ground RGB2 input terminal (RGB2 INPUT/mD-sub) Pin No.
10 PAR T NAMES AND FUNCTIONS (Continued) 1 P ower ON but ton [PO WER ON] ➝ (See P . 14.) T urns the power ON. 2 P ower OFF but ton [POWER OFF] ➝ (See P . 14.) T urns the power OFF . 3 RGB input mode select or button [R GB] ➝ (See P . 15.) Switches between RGB input modes.
11 PRECA UTIONS T o prevent malfunction, be sure not to apply an y form of severe shock to the remote control. T o prev ent malfunction or deformation, be sure not to allow the remote control to become wet; also, k eep it away from hot locations or heating equipment.
12 Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used v aries depending on the PC model. Contact your dealer for more information.
13 Connection to PC Connection to A V equipment POWER INPUT COMPONENT VIDEO INPUT (color difference input) / RGB3 INPUT RGB1 INPUT (DVI-D) RGB2 INPUT (mD-sub) A UDIO2 INPUT VIDEO INPUT S-VIDEO INPUT A.
14 Pr ess the main power switc h at the bott om of the display . When you do so, the main po wer turns ON. Pr ess on the r emote contr ol. When you do so, the power indicator lamp turns green. Pr ess or t o select a desir ed input mode. BA SIC OPERA TIONS * Y ou can also use the switches on the display ’ s control panel to accomplish these steps.
15 SELECTING INPUT MODE Pr ess t o select a desir ed input mode. Each time you press , a different input mode appears. The sequence is as follo ws: V ideo: Displays pictures from equipment connected to the V ideo terminal. S-video: Displays pictures from equipment connected to the S-video terminal.
16 WA TCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor b urn-in. • A variety of picture modes are a vailable with this display .
17 Infor mation Y ou may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the V ista V ision or Cinema V ision size i.e., the sizes used frequently for picture software. Nor mal Displays pictures of normal size (i.
18 SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. Pr ess . The main menu screen will appear . Pr ess or to switc h between sub-menus. Each time you press or , one of the available menus appears.
19 : Increases width. : Reduces width. : Increases height. : Reduces height. Option (1) Contrast (2) Brightness (3) Color (4) T int (5) Sharpness (6) Picture Mode (7) Color T emp. (8) User Color T emp. (9) Noise Reduction (for V ideo, S-video, Comp.video) Function Adjusts picture contrast.
20 USING THE FEA TURES MENUS • FEA TURES setup screen has 5 options of Adjustment, Function, On Screen Menu, Input T er minal and Others. • Options with “ ” on the r ight When you select an option with “ ” , press . The adjustment/setup screen for that option appears.
21 Option (1) 24 Frame Mode (for V ideo, S-video, Comp.video) (2) 3D Y/C (for V ideo(3.58NTSC)) Function Displays the optimum movie pictures. Selects whether to enable the 3D Y/C circuit. Operation Use or for switching. Use or for switching. Range On (Movie) / Of f (Normal) On (3D Y/C circuit) / Of f (3-line) Function Menu(See P .
22 HO W T O USE MENUS (Continued) Others(1/2) Menu screen Option (1) DPMS (2) Audio Input (3) Screen Orbiter (for RGB) Function Specifies time before DPMS starts. Can specify the background color when specifying time. Selects audio input terminal. Sets up screen orbiter .
23 Function Specifies input mode of highest priority . Selects display number . Selects input signal. Specifies and displays type of input signal directly . Sets up to display white over the entire screen. Sets up Exhibition mode. Sets up whether horizontal or vertical installation.
24 AD JUS TING PICTURES (PICTURE MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ PICTURE ” . Each time you press or , one of the available menus appears in the following sequence: The PICTURE Menu screen will appear . Pr ess or to select “ Tint ” .
25 • Adjusting Contr ast (Contrast) Any v alue between -30 and +30 can be selected. : Higher contrast : Lo wer contrast Press to store. • Adjusting Scr een Brightness (Br ightness) Any v alue between -60 and +60 can be selected. : Brighter screen : Darker screen Press to store.
26 AD JUS TING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Pr ess . The main menu screen will appear . Pr ess or t o select “ POSITION/SIZE ” . Each time you press or , one of the available menus appears in the following sequence: The POSITION/SIZE Menu screen will appear .
27 Comp.video mode -16 to +16 -32 to +32 (for1080I,720P) -4 to +4 RGB mode RGB-PC: -150 to +150 Decoder: -16 to +16 -32 to +32 (for1080I,720P) RGB-PC: -25 to +50 Decoder: -4 to +4 * On-screen information disappears if you do not take any action for about 60 seconds.
28 AD JUS TING A UDIO (A UDIO MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ AUDIO ” . Each time you press or , one of the av ailable menus appears in the following sequence: The A UDIO Menu screen will appear . Pr ess or to select “ Balance ” .
29 Adjusting T r eble (T r eble) Each audio input Any v alue between -6 and +6 can be selected. : Stronger treble : W eaker treble Adjusting Bass (Bass) Each audio input Any v alue between -6 and +6 can be selected. : Stronger bass : W eaker bass Adjusting V olume Balance (Balance) Each audio input Any v alue between -10 and +10 can be selected.
30 OTHER AD JUS TMENTS (FEA TURES MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ FEA TURES ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear . Pr ess or to select "On Scr een Menu".
31 • FEA TURES setup scr een has the following 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot Clock, Clamp Position. Function : Can make a function setting such as 24 Frame Mode, 3D Y/C. (See P . 32.) On Screen Menu : Can make a display setting such as OSD, Language.
32 • Setting Displa y Infor mation (OSD) All modes Y ou can use this option to select whether to display information other than menus. (Error messages are displayed regardless of what choice you make for this option.) Each time you press , one of the av ailable choices appears in the following sequence: On Off On : Displays all information.
33 * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
34 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued ) INPUT TERMINAL • Selecting D-SUB Input (D-SUB Input) All modes Y ou can use this option to select the signal system it will receive to D-SUB Input terminal. (1) Select D-SUB Input and press . D-SUB Input screen appears.
35 • Selecting input ter minals (Audio Input) All modes Y ou can use this option to select one of the two av ailable terminals to receiv e sound from input equipment. (1) Select “ Audio Input ” and press . The “ Audio Input ” selection screen will appear .
36 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued ) • Input mode of pr iority (Input Pr ior ity) All modes Y ou can use this option to switch between modes only when a signal is received through the selected input mode terminal. Y ou cannot switch the input mode.
37 * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
38 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued) * On-screen information disappears if you do not take any action for about 60 seconds. * The follo wing abbre viations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
39 INITIALIZA TION OF USER AD JUS TMENT V ALUE(F A CT OR Y DEF A UL T) Pr ess . The main menu screen will appear . Pr ess or t o select “ F ACT OR Y DEF A UL T ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear .
40 OPTIONS W all-mounting unit V ertical: 0 ° to 5 ° mounting angle P-42WB12 (for both vertical and horizontal) Horizontal: 0 ° to 15 ° mounting angle Hanging unit 0 ° to 15 ° mounting angle (v .
41 640 x 480 31.47 59.94 VGA 640 x 480 37.86 72.81 VGA 72 Hz 640 x 480 37.50 75.00 VGA 75 Hz 640 x 480 43.27 85.01 VGA 85 Hz 720 x 400 31.47 70.09 400 lines 800 x 600 37.88 60.32 SVGA 60 Hz 800 x 600 48.08 72.19 SVGA 72 Hz 800 x 600 46.88 75.00 SVGA 75 Hz 800 x 600 53.
42 Model PDS4233W/PDS4234W Screen size 42" wide screen: 92.0 cm (W) x 51.8 cm (H) (105.6 cm diagonal) 36.2 inch (W) x 20.4 inch (H) (41.6 inch diagonal) Aspect ratio 16:9 (wide) W eight 28.5 kg / 62.8 lbs Outer dimensions 103.5 (W) x 64.0 (H) x 8.
43 Regulation --- PDS4233W • UL, CSA Safety: UL1950/CSA C22.2 No.950 EMC: FCC Part 15 Class A, ICES-003 Class A • CE Safety: EN60950 1992, A1: 1993, A2: 1993, A3: 1995, A4: 1997 EMC: EN55022 1998,.
44 A ction • Check whether the po wer plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode. • Check whether the input mode display is colored pink.
1116, Suenaga, T akatsu-ku, Kawasaki 213-8502, J apan Printed in J apan 81 1 27780 15.
A list of errata. P.44 SPECIFICATION Screen size (error) 92.0 cm(W) x 51.8 cm(H) (105.6 cm diagonal) 36.2 inch(W) x 20.4 inch(H) (41.6 inch diagonal) ↓ (exactly) 92.1 cm(W) x 51. 8 cm(H) (105.7 cm diagonal) 36.3 inch(W) x 20.4 inch(H) (41.6 inch diagonal) P.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Fujitsu PDS4234W è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Fujitsu PDS4234W - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Fujitsu PDS4234W imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Fujitsu PDS4234W ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Fujitsu PDS4234W, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Fujitsu PDS4234W.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Fujitsu PDS4234W. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Fujitsu PDS4234W insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
