Manuale d’uso / di manutenzione del prodotto PDS4229W del fabbricante Fujitsu
Vai alla pagina of 42
Before using the display , read this manual carefully so that you know how to use the display cor rectly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily .
DECLARA TION OF CONFORMITY according to EN45014 We Fujitsu General (U.K.) Co. Limited of Ground Floor , Elstree House, Elstree W ay , Borehamwood, Herts WD6 1LS Manufacturer: Shinjyo Fujitsu General L.
2 SAFET Y PRECA UTIONS FCC NO TICE • PDS4229W: A Class A digital device This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
3 P ower cord A C 240 V (S AA TYPE) (Not included) AC 200–240 V (Not included) A C 1 0 0–125 V (Included) Power supply v oltage: – This product is equipped with a three-wire plug. This plug will fit only into a grounded power outlet. If you are unable to insert the plug into the outlet, contact your electrician to install the proper outlet.
4 FEA TURES This display uses a plasma display panel and is only 8.5 cm deep. W ith its high picture quality and performance, it is perfectly suited for multimedia applications.
5 ACCESSORIES Infor mation Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products.
6 INS T ALLA TION T o prevent the display’ s internal components from overheating, make sure that the display is installed in a well-ventilated location. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display .
7 PAR T NAMES AND FUNCTIONS Fr ont 1 P ower indicat or lamp This lamp shows the state of the power supply . Lit (red): Standby Lit (green): Power ON Lit (orange): Power saving (DPMS: Power saving function) mode ON Flashing (red): Malfunction (Flashes differently depending on the type of malfunction.
8 1 V ideo input ter minal (VIDEO INPUT) Connect this terminal to the video output terminal of your VCR or video disk player . 2 S-video input t er minal (S-VIDEO INPUT) Connect this terminal to the S-video output terminal of your VCR or video disk player .
9 Pin No. Input signal Pin No. Input signal 1 Red 9 — 2 Green 10 Ground 3 Blue 1 1 — 4 — 12 — 5 Ground 13 Horizontal synchronization (TTL) 6 Ground 14 V ertical synchronization (TTL) 7 Ground 15 — 8 Ground Frame Ground Pin No.
10 PAR T NAMES AND FUNCTIONS (Continued) Note The remote control will not function properly if the batteries are dead. Be sure to replace them as needed. Make sure that you use replace the batteries with new ones; also, be sure to use replacement batteries of the same type as the original ones.
11 PRECA UTIONS T o prevent malfunction, be sure not to apply any form of severe shock to the remote control. T o prevent malfunction or deformation, be sure not to allow the remote control to become wet; also, keep it away from hot locations or heating equipment.
12 Be sure to turn OFF the power to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of cable to be used varies depending on the PC model. Contact your dealer for more information.
13 Connection to PC POWER INPUT VIDEO INPUT S-VIDEO INPUT COMPONENT VIDEO INPUT (color difference input) RGB INPUT RS-232C T o receptacle T o video output terminal T o S-video output terminal T o colo.
14 Pr ess on the r emote contr ol. When you do so, the power indicator lamp turns green. Pr ess or t o select a desir ed input mode. BA SIC OPERA TIONS 1 2 * Y ou can also use the switches on the display ’ s control panel to accomplish these steps. TURNING ON THE PO WER Pr ess when the pow er is ON.
15 SELECTING INPUT MODE Pr ess to select a desir ed input mode. Each time you press , a different input mode appears. The sequence is as follows: V ideo: Displays pictures from equipment connected to the V ideo terminal. S-video: Displays pictures from equipment connected to the S-video terminal.
16 WA TCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a 4 x 3 mode for extended periods of time may cause phosphor burn-in. • A variety of picture modes are available with this display .
17 Infor mation Y ou may find dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the V ista V ision or Cinema V ision size i.e., the sizes used frequently for picture software. Nor mal Displays pictures of normal size (i.
18 HO W T O USE MENUS 1 2 3 SELECTING OPTIONS IN A MENU Use the [MODE] button on the display or and on the remote control to select a desired input mode. Pr ess . The main menu screen will appear . Pr ess or to switc h between sub-menus. Each time you press or , one of the available menus appears.
19 Option (1) Contrast (2) Brightness (3) Color (for V ideo, S-video, Comp.video) (4) T int (for V ideo, S-video, Comp.video) (5) Sharpness (6) Gamma (7) Color T emp. (8) User Color T emp. Function Adjusts picture contrast. Adjusts screen brightness. Adjusts color darkness.
20 USING THE FEA TURES MENUS • FEA TURES setup scr een has 5 options of Adjustment, Function, On Screen, Input T er minal and Others. • Options with “ ” on the r ight When you select an option with “ ” , press . The adjustment/setup screen for that option appears.
21 Option (1) Gradation (for RGB) Function Makes gradation correction. Operation Use or for switching. Range Motion/Still Function Menu(See P . 30.) On Scr een Menu(See P . 30) Option (1) OSD (2) OSD Rotate (3) Language Function Selects whether to display information other than menus.
22 HO W T O USE MENUS (Continued) Others(1/2) Menu screen Option (1) DPMS (2) Screen Orbiter (for RGB) (3) Input Priority (4) Monitor No. (5) Direct Setting (for RGB) (6) Code Setting (for RGB) (7) White Screen (for RGB) (8) Exhibitation Mode (9) Installation (10) Key Lock (1 1) Information Function Specifies time before DPMS starts.
23 USING THE F ACT OR Y DEF A UL T MENU • Select F ACT OR Y DEF A UL T and execut e to r estor e the adjustment/setting made in the MENU t o f actory set tings. (See P . 36.) F ACTOR Y DEFA UL T Menu screen Y es/No selection screen Option F ACTOR Y DEF AUL T Function Restores the adjustment/ setting made in the MENU to factory settings.
24 AD JUS TING PICTURES (PICTURE MENU) Pr ess . The main menu screen will appear . Pr ess or t o select “ PICTURE ” . Each time you press or , one of the available menus appears in the following sequence: The PICTURE Menu screen will appear . Pr ess or to select “ Tint ” .
25 • Adjusting Contr ast (Contrast) Any value between -30 and +30 can be selected. : Higher contrast : Lower contrast Press to store. • Adjusting Scr een Brightness (Br ightness) Any value between -60 and +60 can be selected. : Brighter screen : Darker screen Press to store.
26 AD JUS TING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ POSITION/SIZE ” . Each time you press or , one of the available menus appears in the following sequence: The POSITION/SIZE Menu screen will appear .
27 * On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
28 OTHER AD JUS TMENTS (FEA TURES MENU) Pr ess . The main menu screen will appear . Pr ess or to select “ FEA TURES ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear . Pr ess or to select "On Scr een Menu".
29 • FEA TURES setup scr een has the follo wing 5 options. Adjustment : Can make a fine adjustment of pictures such as Dot clock, Clamp position. Function : Can make a function setting such as Gradation. (See P . 30.) On Screen Menu : Can make a display setting such as OSD, Language.
30 OTHER AD JUSTMENTS (FEA TURES MENU) (Continued) • Cor recting gradation (Gr adation) Y ou can use this option to make gradation corrections suitable for still or motion pictures. Each time you press or , one of the available choices appears in the following sequence: Motion Still Motion : Suitable for watching motion pictures.
31 * On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
32 OTHER AD JUS TMENTS (FEA TURES MENU)( C ontinued) * On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
33 • Minimizing phosphor bur n-in (Screen Orbiter) Y ou can use this option to move the screen position to minimize phosphor-induced “ burning ” . Follow the steps below . (1) Select “ Screen Orbiter ” and press . The “ Screen Orbiter ” setting screen will appear .
34 * On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.video mode, : RGB-PC mode, : Decoder mode • Assigning Numbers to Displa ys (Monitor No.
35 * On-screen information disappears if you do not take any action for about 60 seconds. * The following abbreviations used in this document represent input modes in which you can make adjustments: : V ideo mode, : S-video mode, : Comp.
36 INITIALIZA TION OF USER AD JUS TMENT V ALUE(F ACT OR Y DEF A UL T) Pr ess . The main menu screen will appear . Pr ess or to select “ F ACT OR Y DEF AUL T ” . Each time you press or , one of the available menus appears in the following sequence: The FEA TURES Menu screen will appear .
37 OPTIONS W all-mounting unit V ertical: 0 ° to 5 ° mounting angle P-42WB12 (for both vertical and horizontal) Horizontal: 0 ° to 15 ° mounting angle Hanging unit 0 ° to 15 ° mounting angle (va.
38 FA CT OR Y SET TINGS This display can store parameter settings for four additional signals for RGB. T o do this, select a desired signal and follow the instructions in “ Adjusting Screen Position and Size ” on P . 26 – 27 to adjust the parameters.
39 Model PDS4229W Screen size 42" wide screen: 92.0 cm (W) x 51.8 cm (H) (105.6 cm diagonal) 36.2 inch (W) x 20.4 inch (H) (41.6 inch diagonal) Aspect ratio 16:9 (wide) W eight 28.5 kg / 62.8 lbs Outer dimensions 103.5 (W) x 64.0 (H) x 8.5 (D) cm / 40.
40 A ction • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode. • Check whether the input mode display is colored pink.
1116, Suenaga, T akatsu-ku, Kawasaki 213-8502, J apan Printed in J apan 81 1 16020 07.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Fujitsu PDS4229W è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Fujitsu PDS4229W - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Fujitsu PDS4229W imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Fujitsu PDS4229W ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Fujitsu PDS4229W, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Fujitsu PDS4229W.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Fujitsu PDS4229W. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Fujitsu PDS4229W insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
