Manuale d’uso / di manutenzione del prodotto P42HHA10E del fabbricante Fujitsu
Vai alla pagina of 47
Before using the display , read this manual carefully so that you know how to use the display correctly . Refer to this manual whenever questions or problems about operation arise. Be sure to read and observe the safety precautions. Keep this manual where the user can see it easily .
E-2 SAFETY PRECAUTIONS IMPOR T ANT INFORMA TION IMPORT ANT W ARNING: This is a Class B product. In a domestic en vironment this product may cause radio interference in which case the user may be required to take adequate measures. W ARNING: TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS PR ODUCT T O RAIN OR MOISTURE.
E-3 English 14) Refer all servicing to qualif ied service personnel. Servicing is required when the apparatus has been damaged in any way , su ch as power - supply cord or plug is damaged, liquid has .
E-4 FEA TURES V ariety of input signals • In addition to mD-sub terminal, the display also supports input of digital RGB signal input enabling D VI standard (HDCP*) high definition picture quality .
E-5 English ACCESSORIES Information Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these products. CHECKING ACCESSORIES HANDY TIPS • V iewing the screen constantly for e xtended periods can strain your eyes.
E-6 INST ALLA TION T o prev ent the display ’ s internal components from ov erhea ting, mak e sure that the display is installed in a well-ventilated location. Be sure to use the optional stand, wall-mounting unit or the other unit when installing the display .
E-7 English PAR T NAMES AND FUNCTIONS ⑨ ① ② DISPLA Y SECTION – FRONT 1 Power indicator lamp This lamp shows the state of the po wer supply . Lit (red): Stand-by Lit (green): Pow er ON Lit (orange): Power sa ving (DPMS: Power saving function) mode ON (See P .
E-8 PART NAMES AND FUNCTIONS (Continued ) DISPLA Y SECTION – LOWER PAR T 1 /I power switch When pressed while in the “ OFF ” state, the po wer indica tor lamp lights and the display is placed in the “ ON ” state, and the power can be turned “ ON ” or “ OFF ” by the remote control or on the control panel of the display .
E-9 English Description of Input T erminals RS-232C terminal (RS-232C) 0 + A RGB3 input terminal (RGB3 INPUT/BNC) Connect this terminal to the PC's display (analog RGB) output terminal or decoder (digital broadcast tuner ,etc .) output terminal. *When RGB3 input terminal is connected, Comp.
E-10 PART NAMES AND FUNCTIONS (Continued ) REMOTE CONTROL For details, see page . 1 button Switches between po wer ON and standb y state. 3 DISPLA Y OFF button For sho wing on-screen-information. 4 PICTURE MODE button Switches the picture mode. 7 RGB input mode selector button [RGB 1 – 3] Selects RGB 1 – 3.
E-11 English PUTTING BA TTERIES IN THE REMOTE CONTROL 1 T o remove the co ver , slide it outwards while pressing it do wn. 2 Place two AA batteries in the remote control. Make sure that the batteries are properly oriented. 3 Close the cov er until it snaps into place.
E-12 EFFECTIVE RANGE FOR THE REMOTE CONTROL Point the remote control at the display ’ s signal receiver when using it. Make sure that there are no obstacles between the remote control and the display ’ s signal receiver .
E-13 English CONNECTING THE DISPLA Y TO EXTERNAL EQUIPMENT Be sure to turn OFF the po wer to the display and external equipment before making any connections. No cables are supplied with the display for connection to external equipment. The type of ca b le to be used v aries depending on the PC model.
E-14 CONNECTING THE DISPLA Y TO EXTERNAL EQUIPMENT (Continued) EXAMPLE OF CONNECTION TO EXTERNAL COMPONENTS Remote control Display Speaker (optional) Speaker VCR or other external components See P . VCR E-15 DVD player Satellite tuner E-17 PC E-18 E-P42VHA10E-OV(14_18) 03.
English E-15 VCR • Connect the video signal cable to the SCAR T terminal. (When the P-TE1000E is installed.) • Connect the video signal to either the S-video input terminal or the video input terminal.
E-16 CONNECTING THE DISPLA Y TO EXTERNAL EQUIPMENT (Continued) DVD PLA YER • Connect the video signal cable to either the component video terminal or the SCAR T terminal. (When the P-TE1000E is installed.) • Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.
English E-17 SA TELLITE TUNER • Connect the video signal cable to either the component video terminal or the SCAR T terminal. (When the P-TE1000E is installed.) • Connect the video signal cable to the component video input terminal, S-video input terminal, or the video input terminal.
E-18 PC • As the cable for connecting a PC diff ers with the PC model, please consult your dealer for information on the right cable to pu rchase. • The PC can be connected to either the front side or the rear side, whiche ver is most con venient.
English E-19 * Y ou can also use the b uttons on the display’ s control panel to perform these steps. TURNING THE POWER ON AND OFF 1 2 3 Press /I to the left at the bottom of the display . The po wer lamp lights up. Press on the remote control. The colour of the po wer lamp c hanges from “Red” to “Green”.
E-20 SELECTING INPUT MODE RGB INPUT MODE 1 RGB1 mode Press the – buttons to select the input mode. Y ou can select from VIDEO1 mode to VIDEO4 mode. The video modes corresponding to each input terminal are as follows.
English E-21 OTHER BASIC OPERA TIONS CONVENIENT FUNCTIONS On-screen information (DISPLA Y) Press . The mode is indicated on the screen for 5 seconds. Picture Mode (PICTURE MODE) Press . This button can be used to switc h the picture mode. In the picture mode, you can switch between the set status and the f ine mode.
E-22 WA TCHING PICTURES ON THE WIDE SCREEN Note • Displaying a picture in a Normal mode for extended periods of time may cause phosphor burn-in. • A variety of picture modes are a vailable with this display .
E-23 English Information Y ou ma y f ind dark areas on top and at the bottom of the screen if you select one of the Zoom modes for media while using the V i sta V ision or Cinema V ision size i.e., the sizes used frequently for picture software. SCREEN SIZE ASPECT RA TIO The following aspect ra tios ar e a vailable.
E-24 ADJUSTMENT MENU ADJUSTMENT MENU MENU PICTURE POSITION/SIZE A UDIO FEA TURES F ACT OR Y DEF AUL T Contrast Brightness Colour Tint Shar pness Picture Mode PrecisionSetting Noise Reduction * Picture Memor y Luminance Black Le vel Colour T emp . User Colour T emp.
E-25 English ADJUSTING PICTURES (PICTURE MENU) BASIC OPERA TIONS [EX.: ADJUSTING TINT (Tint)] “PICTURE” selected in the main menu screen (Video Input Mode) “T int” selected in the PICTURE Menu screen (Video Input Mode) Y ou can make changes to all picture adjustment options in the PICTURE Menu.
E-26 ADJUSTING PICTURES (PICTURE MENU) (Continued) • Contrast, brightness, colour darkness, tint, and picture sharpness are adjusted as shown in the following chart. Select the item with , and then adjust with . Finally , pr ess to implement the adjustments.
E-27 English • Setting Noise Reduction (Noise Reduction) Can select the noise reduction setting corresponding to the noise lev el of the input signal. Each time you press or ,one of the available choices appears in the following sequence: Of f: Noise reduction does not function.
E-28 ADJUSTING SCREEN POSITION AND SIZE (POSITION/SIZE MENU) BASIC OPERA TION [EX. : ADJUSTING HORIZONT AL DIRECTION OF SCREEN POSITION] “ POSITION/SIZE ” selected from the main menu screen Y ou can make changes to all screen adjustment options in the POSITION/SIZE Menu.
E-29 English Adjusting Screen Position (Position) Horizontal position (Horizontal) : Mo ves screen to the right. : Moves screen to the left. V ertical position (V ertical) : Moves screen up. : Moves screen down. Press to store. Adjusting Screen Size (Size) Screen width (W idth) : Increases width.
E-30 BASIC OPERA TION [EX.: ADJUSTING VOLUME BALANCE (Balance)] ADJUSTING AUDIO (AUDIO MENU) “ AUDIO ” selected in the main menu screen “ Balance ” selected in the AUDIO Menu screen Y ou can make changes to all sound adjustment options in the A UDIO Menu.
E-31 English * On-screen information disappears if you do not take an y action for about 60 seconds. Adjusting T reble (T reble) Any v alue between -6 and +6 can be selected. : Stronger treble : W eaker treble Adjusting Bass (Bass) Any v alue between -6 and +6 can be selected.
E-32 OTHER ADJUSTMENTS (FEA TURES MENU) BASIC OPERA TION [EX. : SELECTING LANGUAGE (Language)] Y ou can make the follo wing changes in the FEA TURES Menu. “FEA TURES” selected in the main menu screen On Screen Menu screen “Language” selection screen PICTURE POSITION/SIZE AUDIO FEA TURES F ACTORY DEF AUL T 1 2 3 4 5 6 7 8 Press .
English E-33 • FEA TURES setup screen has the following 5 options. Adjustment : Can make a fine adjustment of pictur es such as Dot Clock, Clamp Position. Function : Allows setting of 24-frame mode. (See P . E-34.) On Screen Menu : Can mak e a display setting such as OSD, Language.
E-34 OTHER ADJUSTMENTS (FEA TURES MENU) (Continued) • Setting Display Information (OSD) Y ou can use this option to select whether to display information other than menus. (Error messages are displayed re g ardless of what choice you mak e f or this option.
English E-35 * On-screen information disappears if you do not take an y action for about 60 seconds. SETTING THE INPUT TERMINALS • V ideo Input (when the P-TE1000E is installed) Function Select the video input format. Each time is pressed, the setting is switched.
E-36 • V ideo Input (when the P-TE1010E is installed) Y ou can use this option to select the desired video mode of pictures it will receive to the V ideo Input terminal. Each time you press or , one of the av ailab le modes appears in the follo wing sequence: Auto1: Automa tically selects NTSC, P AL and SECAM.
English E-37 • D-SUB Input Y ou can use this option to select the signal system it will receive to D-SUB Input terminal. (1) Select D-SUB Input and press .
E-38 OTHER ADJUSTMENTS (FEA TURES MENU) (C ontinued) OTHER SETTINGS DPMS for other than RGB1 Y ou can use this option to select the amount of time before the DPMS function starts. DPMS (which stands for “display po wer mana gement signaling”) allo ws the display to maintain an automatic power sa ving function.
English E-39 • Minimizing phosphor burn-in (Screen Orbiter) for RGB Y ou can use this option to move the screen position to minimize phosphor -induced “ bur n-in ” . Follo w the steps below . (1) Select “ Screen Orbiter ” and press . The “ Screen Orbiter ” setting screen will appear .
E-40 * On-screen information disappears if you do not take any action for a bout 60 seconds. • Specifying RGB Input Signal (Code Setting) for RGB2, RGB3 Y ou can use this option to specify and display the type of RGB input signal by code number .
English E-41 INITIALIZA TION OF USER ADJUSTMENT V ALUE (F ACTOR Y DEF AUL T) 1 “ F ACTORY DEF AUL T ” selected in the main menu screen Displays the message of whether to proceed the initialization.
E-42 OPTIONS W all-mounting unit 0° to 15° mounting angle P-WB4200 Hanging unit 0° to 15° mounting angle P-CT4200 Stand P-TT4200 Speaker P-SP4200 (for 42”) P-SP5000 (for 50”) (1 set of 2 speak.
English E-43 INST ALLA TION 1. T urn the power supply switch to OFF . 2. Remove the power plug from outlet. 3. Remove the plate attached to the bottom rear of the main unit from the Video board unit mounting bracket (3 mm screw w/spring X 3). 4. Insert the Video board unit into the main unit slot using the guides on the sides.
E-44 FACTOR Y SETTINGS This display can store the latest four types of signals for RGB adjustment v alue. The fifth input signal will replace the adjustment v alue of the f irst input signal. T o do this, select a desired signal and follo w the instructions in “ Adjusting Screen Position and Size ” on P .
English E-45 SPECIFICA TION Model P42VHA10E Screen size 42" wide screen: 92.1 cm (W) x 51.8 cm (H) (105.7 cm diagonal) 36.3 inch (W) x 20.4 inch (H) (41.6 inch diagonal) Aspect ratio 16:9 (wide) W eight 28.5 kg / 62.8 lbs Outer dimensions 103.7 (W) x 64.
E-46 SPECIFICA TION (Continued) Model P50XHA10E P42VHA20E Screen size 50" wide screen: 42" wide screen: 110.6 cm (W) x 62.2 cm (H) (126.9 cm diagonal) 92.0 cm (W) x 51.8 cm (H) (106.0 cm diagonal) 43.5 inch (W) x 24.5 inch (H) (50.0 inch diagonal) 36.
E-47 English CLEANING AND MAINTENANCE Action • Check whether the power plug is securely inserted into the receptacle. • Check cables for disconnection. • Check whether the power for all input equipment is ON. • Check for connection to wrong terminals or for wrong input mode.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Fujitsu P42HHA10E è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Fujitsu P42HHA10E - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Fujitsu P42HHA10E imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Fujitsu P42HHA10E ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Fujitsu P42HHA10E, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Fujitsu P42HHA10E.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Fujitsu P42HHA10E. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Fujitsu P42HHA10E insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
