Manuale d’uso / di manutenzione del prodotto CDM-7871 del fabbricante Alpine
Vai alla pagina of 22
EN FR ES ES IT SE R ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel.: (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U.S.A. Tel.: 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC.
CHM-S620 CHA-1214 CHA-S624 Alpine CD Changers Give Y ou More! More musical selections, more versatility , more convenience. An Alpine CD Changer adds more musical choices to your sound system. All models can be controlled from Alpine head units and deli ver excellent sound quality .
1 -EN ENGLISH Contents Operating Instructions W ARNING W ARNING .................................................. 2 CAUTION ................................................... 2 PRECAUTIONS ......................................... 2 Basic Operation Detaching the Front Panel .
2 -EN WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERA TE ANY FUNCTION THA T T AKES YOUR A TTENTION A WA Y FROM SAFEL Y DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop.
3 -EN Never Attempt the Following Do not grip or pull out the disc while it is being pulled back into the player by the automatic reloading mechanism. Do not attempt to insert a disc into the unit when the unit power is of f. Inserting Discs Y our player accepts only one disc at a time for playback.
4 -EN Detaching the Front Panel 1 Press and hold the POWER button for more than 3 seconds to turn off the power . 2 Press the (Release) button at upper left side until the front panel pops out. 3 Grasp the left side of the front panel and pull it out.
5 -EN Display Angle Adjustment Movable display The movable display may be adjusted to 3 different angles depending upon user preference. 1 Press the ANGLE 89 button to adjust the angle of the movable display . NOTES • The display will close a half minute after the ignition ke y is turned to the OFF position.
6 -EN Setting the Bass Control Y ou can change the Bass Frequency emphasis to create your own tonal preference. 1 Press the BASS C. button to turn on the Bass setting mode. 2-1 Setting the Bass frequency: Press the g DN or f UP button to select the desired Bass center frequency .
7 -EN Setting the T reble Contr ol Y ou can change the T reble F requency emphasis to create y our o wn tonal preference. 1 Press the TREBLE C. to tur n on the T reble setting mode. 2-1 Setting T reble frequency: Press g DN or f UP b utton to select the desired T reble center frequency .
8 -EN Basic Operation MIN HOUR ZERO CLK Setting T ime 1 While the clock time is displayed, press and hold the CLK (clock) button for at least 3 seconds. The time indication will begin to blink. 2 Press the ZERO button while the time indication is blinking to set seconds to "0".
9 -EN Automatic Seek T uning 1 Press the SOURCE button until a radio frequency appears in the display . 2 Press the BAND button repeatedly until the desired radio band is displayed. Each press changes the band: → F1 (FM1) → F2 (FM2) → AM 3 Press the TUNE button to illuminate the DX and SEEK indicators in the display .
10 -EN Radio Operation BAND/D.A.P . SOURCE A.ME Preset buttons (1 through 6) Manual Storing of Station Presets 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory . 2 Press and hold any one of the Preset buttons (1 through 6) for at least 2 seconds until the station frequency on the display blinks.
11 -EN Storing into Direct Access Preset (D.A.P .) Band A combination of radio stations in any band (up to 6 stations) can be manually preset into the D.A.P . band. 1 Press and hold the D.A.P . button for more than 2 seconds until the D.A.P . indicator appears.
12 -EN Opening and Closing the Movable display 1 Press the c button. The movable display will open. T o close the movable display , press the c button again. The movable display will close. NOTES • Do not apply shock to the mo vable display when it is open as it may r esult in malfunction of the unit.
13 -EN Displaying and Scrolling CD T ext While playing the audio CD with CD T ext, the disc and track names can be displayed and scrolled. 1 In CD mode, press the TITLE button repeatedly to display Disc T ext or Track T ext. NOTE If your CD has no T ext Information, NO TEXT appears.
14 -EN Information CD CD Player/Changer not functioning. • Out of operating temperature range +50˚C (+120˚F) for CD. - Allow the vehicle's interior (or trunk) temperature to cool. CD playback sound is wavering. • Moisture condensation in the CD Module.
15 -EN Specifications FM TUNER SECTION T uning Range 87.7 – 107.9 MHz Mono Usable Sensiti vity 9.3 dBf (0.8 µV/75 ohms) 50 dB Quieting Sensitivity 13.5 dBf (1.3 µV/75 ohms) Alternate Channel Selectivity 80 dB Signal-to-Noise Ratio 65 dB Stereo Separation 35 dB Capture Ratio 2.
16 -EN Installation and Connections Before installing or connecting the unit, please read the following and pages 2 and 3 of this manual thoroughly for proper use. W arning MAKE THE CORRECT CONNECTIONS. Failure to mak e the proper connections may result in f ire or product damage.
17 -EN Installation Caution When you install this unit in your car , do not remove the Detachable Front Panel. If the Detachable Front Panel is remov ed during installation, you might press too hard and warp the metal plate that holds it in place. 1 Remove the Detachable Front Panel (refer to page 4).
18 -EN Installation and Connections Connections Antenna Front right Rear right Speakers Rear left Front left Battery Ignition Key T o amplifier or equalizer T o power antenna Amplifier Amplifier Rear Left Front Right Front Left CD Changer (Sold Separately) Speakers , + .
19 -EN 1 Antenna Receptacle 2 Power Antenna Lead (Blue) Connect this lead to the +B terminal of your po wer antenna, if applicable. NOTE This lead should be used only for contr olling the vehicle's power antenna. Do not use this lead to turn on an amplifier or a signal pr ocessor , etc.
20 -EN.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Alpine CDM-7871 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Alpine CDM-7871 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Alpine CDM-7871 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Alpine CDM-7871 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Alpine CDM-7871, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Alpine CDM-7871.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Alpine CDM-7871. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Alpine CDM-7871 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
