Manuale d’uso / di manutenzione del prodotto P5748 del fabbricante Fisher-Price
Vai alla pagina of 16
www .fisher -price.com.au P5748 IMPOR T ANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE..
2 This package contains small parts in its unassembled state. Adult assembly is required. Prevent serious injur y or death from falls or sliding out: • Always use the restraint system for the upright and reclined positions of the seat. Adjust restraint to fit your child snugly .
3 2 Front Legs 2 Back Legs Footrest Parts All Fasteners Shown Actual Size Tighten the screws with the enclosed Allen wrench. Back Base Seat Back with Shoulder and Waist Belts Seat Bottom with Crotch B.
4 T urn the seat bottom upside down on a flat surface. • Position a back leg so that it curves up and fit it into a large • socket in the seat bottom. Hint: If the leg does not seem to fit into the seat bottom socket, try the other back leg. Fit the other back leg into the large socket in the seat bottom.
5 Position a front leg so that it curves up and fit it into the small • socket in the seat bottom. Hint: If the leg does not seem to fit into the seat bottom, tr y the other front leg. Fit the other front leg into the small socket in the seat bottom.
6 Assembly Fit the back base onto the bottom of both back legs, as shown. • Insert two M6 x 28mm screws into • each back leg and tighten. Fit the sockets on the footrest onto the posts on the front of • the assembly . Slide the footrest up onto the posts.
7 Assembly 13 Seat Back Peg Holes At an angle, fit the pegs on each side of the seat back into the • holes in the sides of the seat bottom. Hint: Y ou may need to flex the bottom edge of the seat back to fit the seat back pegs into the holes in the seat bottom.
8 Assembly Fit the other seat bracket to the other side of the seat bottom, • as shown. Insert two M4 x 17 mm screws and tighten. • 17 M4 x 17mm Screws Seat Bracket Unbuckle the lower restraint. • 18 Lower Restraint Hint: The shoulder belts come assembled to the seat back in the lower position for a smaller child.
9 Fit the elastic loops on the seat pad down through the slots in • the footrest. 21 Elastic Loops Slots Assembly Fit the elastic loops on the seat pad bottom onto the pegs on • the footrest. 22 Pegs BACK VIEW Fit the upper pocket of the seat pad onto the seat back.
10 Securing Y our Child Place your child in the seat. Position the crotch belt between your • child’ s legs. Fasten both waist/shoulder belts to each side of the crotch belt. • Make sure you hear a • "click" on both sides. Check to be sure the restraint system is securely attached by • pulling it away from your child.
11 • T o tighten the waist belts: Feed the anchored end of the waist belt up through the buckle to form a loop A . Pull the free end of the waist belt B .
12 T o adjust the restraint height for baby , push to remove the • shoulder belts from the seat back. 5 Shoulder Belts Smaller Baby Insert the ends of the shoulder belts through the lower slots in the • pad and seat back.
13 Adjusting Seat Recline Hint: Adjust the seat angle to any of three positions: Upright, Semi-Recline or Recline. Lift the seat back latch and push the seat back forward or , pull it • backwards to the desired position. Push the seat back to be sure it is latched in position.
14 4 T o remove the snack tray , pull the tabs on the sides of the snack • tray off the pegs. Slide the tray off of the armrests. • While pulling the release tabs on the sides of the food tray , • adjust the tray forward or backward. While pulling the release handles on the sides of the food tray , • lift to remove it.
15 Care The snack tray , seat and restraint straps may be wiped clean • using a mild cleaning solution and damp cloth. Do not use bleach. Do not use harsh or abrasive cleansers. Rinse clean with water to remove residue. The food tray is dishwasher safe.
Fisher -Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A. ©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN CHINA P5748pr -0729 AUSTRALIA: Mattel Australia Pty. Ltd., 658 Chur ch Street, Locked Bag #870, Richmond, Victoria 3121 Australia.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Fisher-Price P5748 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Fisher-Price P5748 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Fisher-Price P5748 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Fisher-Price P5748 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Fisher-Price P5748, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Fisher-Price P5748.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Fisher-Price P5748. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Fisher-Price P5748 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
