Manuale d’uso / di manutenzione del prodotto 613-001480 del fabbricante Allied Telesis
Vai alla pagina of 16
PN 613-001480 Rev A 1 A T -S94 V ersion 3.0.0.41 A T -8000S Switch Softwar e Release Notes Please read this document before you be gin to use the management softwa re. Caution Failure to upgrade the bootloader before the release soft ware can result in a switch that will not boot.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 2 Allied Telesis, Inc. Supported Platforms The following platforms are included in the AT -8000S family of devices: A T -8000S/16 – 16 FE ports with 1 combo 10/10 0/1000 SFP Port.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 3 Allied Telesis, Inc. What’s New in Version 3.0.0.41 New Software Features None Resolved Issues In some cases where more than one switch has the same STP Bridge Priority value in a network, the swit ch with the higher MAC address wo uld be elected as the STP root bridge.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 4 Allied Telesis, Inc. Port lock: Port security mechanism is not trigg ered for MAC violation if MAC is learned on another locked port as a secured MAC ad dress. Recommended User W ork Around: No work around Mac-group mapping and 802.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 5 Allied Telesis, Inc. Version 3.0.0.41 Upgrade Process You must have the correct software and bootloader installed o n your switch before be ginning the upgrade process to Version 3.0.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 6 Allied Telesis, Inc. 6. Assuming your switch is running the correct bootloa der, you have the correct password to extract the ats94-30041.ros software upgrade file and you know that your current bo otloader is compatible with the Version 3.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 7 Allied Telesis, Inc. 10. Before rebooting the stand alone switch or stack, you mu st change the active image, including each slave switch in the stack. To c heck the active image for each switch use the following command.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 8 Allied Telesis, Inc. 5. Select number one by pressing the ‘1’ key. The switch will respond with the following message : Begin the transmission of a previous version. Downloading code using XMODEM.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 9 Allied Telesis, Inc. Version 3.0.0.33 When the master was lost (powered do wn) the SFP port(s) on backup change d to DOWN – link changed to half duplex and remained down. This issue has been resolved.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 10 Allied Telesis, Inc. The following is a new CLI command introduced in V ersion 3.0.0.40: Version 3.0.0.38 No new features were introduced in this release. Version 3.0.0.35 No new features were introduced in this release.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 11 Allied Telesis, Inc. The following 802.1x feature enhance ments will be su pported: — Guest VLAN - This feat ure allows network adm inistrators to giv e some limited access to the network to unauthorized port s.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 12 Allied Telesis, Inc. Upgrade Procedure fr om Version 1.0.0.25 All software released after version 1 .0.0.25 requires additional FLASH sectors beyond the current amount of FLASH sectors currently allocated for the image.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 13 Allied Telesis, Inc. 2. Download the ats94-Interim image drop to the device via TFTP by using one of the followin g commands depending on your configuration: Note You must substitute the IP address of your local TFTP server.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 14 Allied Telesis, Inc. 7. Before rebooting the stand alone switch or stack, you mu st change the active image, including each slave switch in the stack. To c heck the active image for each switch use the following command.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 15 Allied Telesis, Inc. 14. Before rebooting the stand alone switch or stack, you mu st change the active image, including each slave switch in the stack. To c heck the active image for each switch use the following command.
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 16 Allied Telesis, Inc. Contacting Allied Telesis This section provides Allied Teles is contact information for technical support as well as sales and corporate information. Online Support You can request technical support online by accessing the Allied Tel esis Knowledge Base: www.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Allied Telesis 613-001480 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Allied Telesis 613-001480 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Allied Telesis 613-001480 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Allied Telesis 613-001480 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Allied Telesis 613-001480, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Allied Telesis 613-001480.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Allied Telesis 613-001480. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Allied Telesis 613-001480 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
