Manuale d’uso / di manutenzione del prodotto EN-7517C del fabbricante EverFocus
Vai alla pagina of 46
Instruction Manual EN-7517C / EN-7519C 17” / 19” PREMIUM TFT-LCD MONITOR.
Please read this manual thoroughly before use, and keep i t handy for future reference..
SAFETY INSTRUCTION ………………………………………………………………….. 2 ~ 3 CAUTIONS ………………………………………………………………............... ........... 4 FCC RF INTERFERENCE STATEM ENT …………………………….
INSTRUCTION MANUAL …………………………………………… ………………………. 1 Import ant Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instruct ions. 5. Do not use this apparatus near water .
receptacles and the point where they ex it from the apparatus. 1 1. Only use attachment/accessories specified by the manufacturer . 12. Use only with the cart, s tand, tripod, bracket or t able specified by th e manufacturer or sold with the apparatus.
This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclos ure that may be of sufficient magnitude to constitute a risk of ele ctric shock to persons.
NEVER REMOVE THE BA CK COVER Removal of the back cov er should be carried out only by qual ified personnel. DO NOT USE IN HOSTILE ENVIRONMENTS To prevent shock or fire hazard, do not expose the unit to rain or moist u re. This unit is designed to be used in the offic e or home.
This equipment has been tested and fou nd to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferenc e in a residential installation.
A. BOTTOM PANEL CONTROL 1. HDMI IN 2. DVI IN 3. VGA(D-SUB) IN 4. PC STEREO IN 5. AUDIO OUT(Speaker) 6. COMPONENT Y,Pb,Pr & SOUND L,R IN 7. DC 12V IN 8. TRIGGER INPUT B. SIDE PANEL CONTROL 1. VIDEO1(AV1) IN 2. VIDEO1(AV1) OU T 3. VIDEO2(AV2) IN 4. VIDEO2(AV2) OU T 5.
6 …………………………………… ………………………………. INSTRUCTION MANUAL C. REMOTE CONTROLLER (Option) 1. POWER( ) Turn the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or vid eo(AV1/AV2/S-Video/Comp onent/HDMI/DVI/PC) sources.
Select AV mode .(AV1, AV2 & S-VIDEO). 24. COMP Select CO MPONENT mod e. INSTRUCTION MANUAL …………………………………………… ………………………. 7 D. FRONT KEY CONTROL 1 / 2. VOL Adjus t the volum e and menu setti ngs.
9. POWER LED The power LED lights with green when the power is turned ON. The power is t urned off by press ing the power switch again and the power LED goes Re d.
Tint: Increase or decrease the tint of the picture. Sharpness: Increase or decrease the sharpness of the pi cture. A: CUSTOM MENU (For HDMI, DV I & PC Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Custom.
1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to sel ect the Picture / Sound. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down ( ▼ ) button to select the Picture Mode. 4) Press the right( ▶ ) or SOURCE/SELECT button.
4) Press the MENU button to save. 10 ……………………………………………… ……………………. INSTRUCTION MANUAL 3. Mute 1) Press the up( ▲ ) or down( ▼ ) button to select the Mute. 2) Press the right( ▶ ) or SOURCE/SELECT button.
1) Press the up( ▲ ) or dow n( ▼ ) button to select the Volume 2) Press the left (◀) or right( ▶ ) button to adjust Volume s etting. 3) Press the MENU button to save. INSTRUCTION MANUAL ………………………………………………… ………………….
1) Press the up( ▲ ) or dow n( ▼ ) button to select the Size 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or dow n( ▼ ) button to select the Size option. 4) Press the MENU button to save. 6. NR 1) Press the up( ▲ ) or dow n( ▼ ) button to select the NR.
7. 3D Comb 1) Press the up( ▲ ) or down( ▼ ) button to select the 3D Comb. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. B. Picture / Sound Menu (F or HDMI, DV I & PC Input) 1.
4) Press the right( ▶ ) or SOURCE/SELECT button. 5) Press the up( ▲ ) or down ( ▼ ) button to select the Picture Mode option. 6) Press the MENU button to save. INSTRUCTION MANUAL ………………………………………………… ………………….
3) Press the left( ▶) or SOURCE/SELECT button again. 4) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone opti on. 5) Press the MENU button to save. 14 ……………………………………………… …………………….
1) Press the up( ▲ ) or down( ▼ ) button to select the Custom in the Col or Tone. 2) Press the Menu button to save. 3) Press the up( ▲ ) or down( ▼ ) button to select the Red(R), Green(G) or Blue(B). 4) Press the left(◀) or right( ▶) button to adjust color dens ity.
INSTRUCTION MANUAL ………………………………………………… …………………. 15 3. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option.
4) Press the right( ▶ ) or SOURCE /SELECT button. 5) Press the left (◀) or right( ▶ ) button to adjust the PC setting. 6) Press the MENU button to save. Auto Adjust: Auto geometry adjustment. Phase: Adjust the number of horizontal picture elements.
1) Press the right( ▶ ) or SOURCE/SELECT button. 2) Press up( ▲ ) or down( ▼ ) button to sel ect the On or Off. 3) Press the MENU button to save. INSTRUCTION MANUAL ………………………………………………… ………………….
1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Source option. 4) Press the MENU button to save. 3. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size.
18 ……………………………………………… ……………………. INSTRUCTION MANUAL 4. Position 1) Press the up( ▲ ) or down( ▼ ) button to select the Position. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Position option.
1) Press the up( ▲ ) or down( ▼ ) button to select the Swap. 2) Press the right( ▶ ) or SOURCE/SELECT button to swap the main image for the sub one. INSTRUCTION MANUAL ………………………………………………… ………………….
C. PIP MENU (For HD MI, DVI & PC Input) 1. Input Source 1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input Source option.
1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Setup. 1. Reset 1) Press the right( ▶ ) or SOURCE /SELECT button 2) Press the right( ▶ ) or SOURCE /SELECT button again. 3) Press SOURCE/SEL ECT button to execute t he reset.
2. Language 1) Press the up( ▲ ) or down( ▼ ) button to select the Language. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select language. 4) Press the MENU button to save. 3. OSD Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone.
4. Blue Screen 1) Press the up( ▲ ) or down( ▼ ) button to select the Blue Screen. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 5. Key Lock 1) Press the up( ▲ ) or down( ▼ ) button to select the Key Lock.
INSTRUCTION MANUAL ………………………………………………… …………………. 23 6. Trigger 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger. 2) Press the right() or SOURCE/SELECT button. 6-1. Trigger Enable 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Enable.
24 ……………………………………………… ……………………. INSTRUCTION MANUAL 6-2. Trigger Input 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input . 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input option.
INSTRUCTION MANUAL ………………………………………………… …………………. 25 6-4. Trigger Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Time. 2) Press left() or right() button to adjust Trigger Time setting.
N/C (Normal Closed): W h en Trigger cable is opened, Trigger function is activated. N/O (Normal Opened): When Trigger cable is closed, Trigger function is activated. High: When Trigger signal is high(2~5 [V]), Trigger function is activated. Low: When Trigger signal is low(0~0.
The Type of I mage 2 : Component, H DMI, DVI or PC. INSTRUCTION MANUAL ………………………………………………… …………………. 27 7. Auto switching 1) Press the up( ▲ ) or down( ▼ ) button to select the Auto switching. 2) Press the right() or SOURCE/SELECT button.
1) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off . 4) Press the Menu button to save. 28 ……………………………………………… ……………………. INSTRUCTION MANUAL 7-2.
1) Press the up( ▲ )or d own( ▼ ) button to select the Inputs enabled. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input. 4) Press the right() or SOURCE/SELECT button. 1) Press the up( ▲ ) or down( ▼ ) button to select the On or Off.
1) Press the up( ▲ ) or down( ▼ ) button to select the Time. 2) Press the left() or right() button to adjust the Time setting. 3) Press the MENU button to save. 30 ……………………………………………… …………………….
Using the VESA standard wal l mount design and the 100mm hole pattern on the back panel to in stall the L CD moni tor to the wall . Wall-mount Installation (Option) 1.
▶ PIN ASSIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETE CT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(fo r DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL (for DDC) 8 BLUE G ROUND ▶ ACCESSORIES 1. Power cord 2.
32 ……………………………………………… ……………………. INSTRUCTION MANUAL This monitor features a power management system to “power down” upon receipt of the VESA DPMS(The display power manag ement signaling) from a VESA DPMS video card.
INSTRUCTION MANUAL ………………………………………………… …………………. 33 17 ” 19 ” 17 ˝ Diagonal AM-TFT(Active-Matrix) 19 ˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.264(H) x 0.264(V) Pixel pitch(mm) : 0.294(H) x 0.
Gross Weigh t : 8. 19Kg (18. 06 lbs )) Gr oss W eight : 8.94K g (19. 71 l bs) ELECTRICAL RATINGS DC 12V/ 3.0A DC 12V/ 3.5A ▶▶ NOTE : Technical specifications are subject to change without notice. 34 ……………………………………………… …………………….
INSTRUCTION MANUAL ………………………………………………… …………………. 35 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the.
Taiwan - Headquarter Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 China - Beijing Offic e Room 609,Technology Trade Building.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il EverFocus EN-7517C è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del EverFocus EN-7517C - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso EverFocus EN-7517C imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul EverFocus EN-7517C ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il EverFocus EN-7517C, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del EverFocus EN-7517C.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il EverFocus EN-7517C. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo EverFocus EN-7517C insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
