Manuale d’uso / di manutenzione del prodotto P-6000 del fabbricante Epson
Vai alla pagina of 72
P-6000/P-7000 Basics P6000-7000Basics.book Page 1 We dnesday, April 23, 2008 2 :25 PM.
2 Copyright Notice All rights reserved. No part of th is pu blication may be reproduced, stored in a retrieval system, or transmitted, in an y form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation.
3 Contents Introduction 5 About Your Software and User’s Guide 6 Getting Started 7 Unpacking Your P-6000/P-700 0 7 Installing the Battery 8 Charging the Battery 9 Turning the Viewer On and Off 10 Se.
4 Using the Viewer with USB Devices 36 Connecting a USB Device 37 Copying Files to the Viewer 38 Copying Files to a USB Device 39 Playing Music 43 Copying Music Files from Your Computer 43 Playing Aud.
5 Introduction Y our Epson P-6000 /P-7000 M ultimedia S torage Vie wer ™ lets you enjoy photo s, videos, and music wherever you go. Its featur es include: ◗ Large, high-quality 4-inch LCD with Pho.
6 About Y our Software and User’s Guide The following software is included on your P-6000/ P-7000 M ultimedia S t orage View er: ◗ Epson Link2 software to transfer photos, videos, and music back a.
7 Getting Starte d F ollow the instructions in this section to set up your P-6000/P-7 000. Unpacking Y our P-6000/P-7000 AC adapter Strap Lithium-ion battery USB cable Carrying case Epson P-6000/P- 7000 Power cord P6000-7000Basics.
8 Installing the Battery 1 Open the batter y cover . 2 Insert the batter y . 3 Close the battery cover . Note: If you need to remove the battery, open the battery cover, and slide the battery release lever to the left. Battery release lever P6000-7000Basics.
9 Charging the Battery Plug the AC adapter into the viewer . Connect the power cord to the adapter and plug it into an electrical outlet. The Charge light turns on. I t takes about 3 .5 hours to charge the battery when the viewer is not in use. Caution: Do not use the viewer without the battery installed .
10 T urning the V iewer On and Off T o turn on the viewer , slide the power switch down and rele as e it . T urning Off the Viewer T o turn off the viewer , make sure the memory card access light is off (see page 18), then slide the power switch down and hold it until you see the message Shutting Down .
11 Setting the Language , Date, and T ime When you turn on the viewer the first time, you see the Language setting screen: 1 P ress OK to select English . Y ou see a message about setting the date. 2 P ress OK . Y ou see the Date and T ime screen: P6000-7000Basics.
12 3 P ress right or left on the 4-way ring to highlight a setting to change. 4 P ress up or do wn to change the setting. 5 When you ’ re done changing the date and time, highlight Complete and press OK . Y ou see the Home screen: Note: If you remove the battery, the date and time settings will be erased after about one day.
13 Installing Y our Software and User’s Guide T o transfer files between your computer and viewer , convert video and audio files, and create music playlists, you need to install the Epson Link2 software.
14 3 U se the included USB cable to connect the viewer to your computer . 4 Make sure the viewer is on the H ome screen, then press the button to connect to your computer . The viewer LCD screen turns off and your c omputer recognizes the viewer as a removable drive.
15 6 Double-click the installation software located in the root of the drive: ◗ Windows: P_6000_WIN_SOFTWARE or P_7000_WIN_SOFTWARE In Windo ws Vista ® , if you see the U ser Account Control screen during installation, click Allow . ◗ Maci nt osh : P_6000_MAC_SOFTWARE.
16 Note: To view the U ser’s Guide , double-click its icon on your desktop. You need to have Adobe Reader ® or Acrobat ® installed on your system to view the guide. You can download Adobe Reader at www.adobe.com . Do not remove the software from the viewer after installing it on your computer, i n case you need to reinstall it.
17 Using Memory Cards F ollo w the instructions in this section to insert a memor y card and copy files to you r P-6000/P-7000. Inserting and Removing Memory Cards The P-6000/P-7000 suppor ts the following types of memory cards: ◗ CompactFlash (CF) memory card (T ype2) and Micro Drive ™ (3.
18 Caution: Never remove a memory card while the memory card access light is flashing, or files may be lost or damaged. Make su re you insert memory cards in the correct orientation, or the card and viewer may be damaged. Do not put labels or stickers on memory cards.
19 T o remove a car d from the CF Car d slot, first make sure the memor y card access light is off. Then press the eject button and pull out the card. If the button is not sticking out, press it once to pop it out, then press it again to eject the car d.
20 Using the SD Card Slot Insert an SD, SD HC, M ultiMediaCard, or MMCplus card into the slot as shown belo w . Insert it fully into the viewer . T o remove a car d from the SD Card slot, first make sure the memor y card access light is off. Then press in on the top of the card.
21 Copying Files from a Memory Card After you insert a memor y card (as described on page 18 o r 2 0 ) , y o u c a n c o p y a l l o f t h e f i l e s o n t h e c a rd t o B a c k u p F iles or copy selected files to the M y Photos or M y Videos folder on the viewer .
22 Note: The folder is named accordi ng to the date, for example, 03292008M.001 . You can change the date format by selecting Settings > Date and Time on the Home screen (see page 11). Folders are numbered in the orde r they are copied. When the backup is complete, you see thumbnail images of the copied photos.
23 2 Sele ct Browse CF Memory Card or Browse SD Memory Card, then press OK . Y ou see your photos displayed. 3 P ress the Menu button to display the pop-up menu. 4 Sele ct Copy/Move , then press OK . 5 Sele ct Select and Copy Files , then press OK . Y our photos are displayed with white checkbo xes: checkbox P6000-7000Basics.
24 6 U se the 4-way ring or jog dial to highlight each photo you want to copy and press to select it. The selected items are displayed with red check marks. Tip: To select all files and folders, press Menu and choose Select All . 7 When you ar e finished selecting photos, press OK .
25 Deleting Files After Copying Y ou can have files automatically deleted after you copy them to the viewer . 1 On the Home scr een, use the 4-way ring or jog dial to select Settings and press OK . 2 Sele ct Backup Settings and press OK . 3 Sele ct Process After Backup and press OK .
26 Supported File Formats The P-6000/P-7000 suppor ts these image form ats: The P-6000/P-7000 supp orts .avi, .mov , .mp4, and .m4v format video files. For more details about the supported file formats, see the on-screen User’s Guide . You can also check epson.
27 V iewing Photos and V ideos F ollo w the instructions in this section to view photos, create slide sho ws, and play videos on y our P-6000/ P-7000. T o share your images, slide shows, and videos with a larger audience, you can connect the viewer to a TV or projector (see page 3 4).
28 Y ou see a screen like this: 2 Select the image you want to view , then press OK . The selected image is enlarged to fill the screen. Zooming an Image When viewing an image at full-screen, you can zoom in or pan around to see details. ◗ T o zoom in, press the + (plus) button.
29 Changing How Files Are Displayed Y ou can change your view of the files by pressing the Display button while in a folder: Thumbnails (12 per screen) Mini-thumbnails (64 per screen) Details (file name, backup/ copy date, files size) P6000-7000Basics.
30 Displaying Image Information T o view information about an image shown at full- screen, press the Display button. P ress Displ ay again to view additional information and a histogram like the following: P ress Display a third time to view the over- or under- exposure preview , which highlights areas at both ends of the brightness range.
31 3 T o view rated photos, select Backup F iles or My Photos on the Home screen and press OK . 4 P ress Menu , select Rating Filter Display , and press OK . 5 Select the rating level you want to view , and press OK . The rated photos ap pear on t he screen.
32 3 Sele ct Slide Show and press OK . The slide show starts. T o stop the slide show , press the Back button. Slide Show Settings Y ou can select transition effects, timing, and background music for the slide show . T o change the settings, select Settings on the Home scr een, pr ess OK , then select Slide Show .
33 2 Highlight the video file you want to play , then press OK . The video starts playing. Note: T o set the video screen size, press Menu and select Play at Full Screen or Play at Original Size from Play Settings in the pop-up menu.
34 The viewer r emembers wher e you stoppe d. When you resume, playback starts 3 seconds before the stop point (for videos longer than 1 minute). If you want to r estart playback from the beginning, press Menu , select Play Settings from the pop-up menu, and select Play from Beginning .
35 1 Connect the cab le ’ s three R CA plugs to the video and audio IN jacks on your TV or projector . 2 Connect the cable’ s mini-plug to the A/V Out jack on the side of the viewer . The viewer ’ s LCD scre en turns off . 3 Set the TV or projector to display video input from the viewer .
36 Using the V iewer with USB Devices Y ou can connect a flash memory drive or other USB device to your P-6000 /P-7000 and copy file s to or from the device.
37 Connecting a USB Device Befor e you connect a USB device, connect th e AC adapter to the viewer and plug it in. If your USB device has an AC adapter , use it to prevent the possible loss of files during transfer . 1 Open the connector cover on the side of the viewer .
38 Copying Files to the Viewer After you connect a USB device, y ou can copy all the files to the viewer , or select individual files to copy . 1 On the Home scr een, use the 4-way ring or jog dial to highlight USB Device , then press OK . 2 Sele ct Connect to USB Device , then press OK .
39 The folder is named according to the date, for example, 03292008M.001 . Y ou can change the date format by selecting Settings > Date and Time on the Home screen (s ee page 11).
40 Backing Up All Files to a USB Device This process may take some time, depending on the volume of data in the viewer . 1 F ollow the instructions on page 37 to connect the USB device. 2 On the Home scr een, use the 4-way ring or jog dial to highlight USB Device , then press OK .
41 Copying Selected Files to a USB Device Y ou can select individual files or folders to copy . 1 F ollow the instructions on page 37 to connect the USB device. 2 Highlight the file or folder you want to copy . 3 P ress the Menu button. 4 Sele ct Copy/Move , then press OK .
42 6 U se the 4-way ring or jog dial to highlight each photo you want to copy , then press to select it. The selected items are displayed with r ed check marks. Tip: To select all files and folders, press Menu and choose Select All . 7 When you ar e finished selecting photos, press OK .
43 Playing Music Y ou can copy audio files from your computer and play them on the P-6000/P-700 0. Y ou can create playlists using your computer and the Epson Link2 softwar e, or using the viewer itself . See y our on-screen User’s Guide for instructions on creating a playlist and adjusting audio equalizer settings.
44 3 U se the included USB cable to connect the viewer to your computer . 4 Make sure the viewer is on the H ome screen, then press the button to connect to your computer . The LCD scr een turns off. 5 Double-click the Epson Link2 icon on your desktop to open the program.
45 8 When the transfer is complete, disconnect the viewer from your computer: ◗ Windows: Right-click the or icon in the lower right corner of y our screen and select Safely Remove Hardware or Unplug or Eject Hardware . Then remo ve the US B cable. ◗ Macint osh: Drag and drop the viewer icon to the trash, then remove the USB cable.
46 1 Sele ct My Music on the Home scr een using the 4-way ring or jog dial, then press OK . 2 Sele ct Music List , then press OK . If y ou don ’ t see the songs you transferred to the viewer , selec t Update Music List and press OK . Note: T o contin ue playing from a previously played track, select Resume , then press OK .
47 ◗ Genr e - Genr e name - Artist name - Alb um name - T rack name ◗ All - T rack name ◗ Playlist - Playlist name - T rack name ◗ U pdate M u sic List (to update audio files after transferring them from your computer) 4 Select the track you want using the 4-way ring, then press OK .
48 ◗ T o skip back or for ward, pr ess left or right on the 4-way ring. Pr ess and hold to rewind or fast-forward. ◗ T o return to the previous screen (without stopping the audio), press Back . (If you ret urn to the main M y M usic screen, audio playback stops.
49 Managing Y our Files Y ou can copy the files you ’ ve backed up from memor y cards or USB drives to y our own folders for special purposes, such as portfolios.
50 3 Do one of the following: ◗ T o copy files to another folder , select Select and Copy Files , then press OK . ◗ T o move files to another folder , select Select and Move File s , then press OK . Note: T o copy or move a single file, select Copy th is File or Move this File , then continue with step 5.
51 6 U se the 4-way ring to s elect a folder to co py or mov e the items to. Then do one of the follo wing: ◗ T o copy or move the items into the selected folder , press OK . Y our items are copied or moved. ◗ T o copy or move the items into a new subfol der within the selected folder , highlight Create New Folder and press OK .
52 Creating a New Folder 1 T o copy items to a new folder , follow steps 1 through 6 in the previous section. When you select Create New Folde r and press OK , the on-screen keyboard appears with the curr ent date entered as the default name for the folder .
53 Note: You can rename a folder by highlighting it, pressing the Menu button, and selecting Edit > Rename . Folders in Backup Files can’t be renamed. Deleting Files or Folders 1 Highlight the file or fold er you want to delete. 2 P ress the Menu button, then select Delete .
54 Backing Up Files to Y o ur Computer Y ou can automatically copy al l the files from the vie wer ’ s Backup F iles folder to your computer . 1 Connect the AC adapter to your viewer (see page 9). 2 T urn on the viewer and your computer . 3 U se the included USB cable to connect the viewer to your computer .
55 Note: Although your computer may recogniz e the viewer as a removable drive, it is best to transfer files using the Epson Link2 software. 5 Double-click the Epson Link2 icon on your desktop to open the program. 6 If you see a message that E pson Link2 has found files in your viewer ’ s Backup F iles folder , click Yes to copy the files.
56 Solving Problems Check this list of common problems and possible solutions. F or more troubleshooting tips, check the P-6000/P-7 000 User’s Guide on your comp uter . (See page 13 for instructions on installing and viewing the guide.) Operating Problems The power doesn ’ t turn on.
57 ◗ The viewer may need to be reset. U se the end of a paper clip to gently press the Reset button next to the viewer’ s USB por ts. Viewing Problems The LCD scr een is dark. ◗ The screen may have turned off automatically to save power , or t he viewer may have shut down.
58 Replacing the Battery Y ou can purchase a replacement lithium-ion batter y (B32B818262) fr om an Epson authorized r eseller . T o find the nearest reseller , call 800-GO-EP SON (800-463-7766). O r you can p urchase online at www .epsonstor e.com (U.
59 Speak to a Support Representative Before you call E pson for support, please have the following information ready: ◗ P roduct name (E pson P-6000 or P-7000) ◗ P roduct serial number (loc ated o.
60 Appendix Important Safety Instructions Additional saf ety information f or the P-6000/P-7000 can be found in the on-screen User’s Guide . See page 13 for in structions on i nstalling and viewing the guide. Battery Safety Instructions Warnin g: There is a risk of explosion if the battery is replaced by the incorrect type.
61 ◗ Do not charge the batter y near open flame or in ve ry hot locations. ◗ Keep batteries away from heat so urces. ◗ Do not leave the batter y in a vehi cle to prevent the battery from overh ea tin g. ◗ Do not insert objects into any openings as they may touch dangerous voltage poin ts or short-circuit components.
62 Disposing of the Battery Before disposing of the battery, make su re you discharge it completely. For users in North America : This mark indicates that the battery will be recy cled by the RBRC . When you are ready to dispose of the batter y, contact the RBRC at (800) 822-8837.
63 FCC Compliance Statement For United States Users This equipmen t has been tested and found to comply with the limi ts for a class B d igital device, pursuant to Part 15 of the FCC Rules. These limits are d esigned to prov ide reason able protection against harmful interference i n a resident ial installation.
64 For Canadian Users This Class B digital apparatus co mplies w ith Canadian ICES-003. C e t a p p a r ei l nu m é r i q u e d e l a c l a s s e B e s t c o n f o r m e à l a n o r m e N M B - 0 0 3 du Canada.
65 Epson America, Inc. Limited Warranty What Is Covered: Epson America, Inc. (“Eps on”) warrants to the first retail purchaser that the Ep son product enclosed with this limited warranty s tatemen.
66 What This Warranty Does Not Cover: This warranty covers only normal use i n the United St ates and Canada. This warranty is not transferable. This warranty does not cover damage to the Epson product caused by parts or supplies not manufactured, distributed or certified by Epson.
67 SPECIAL, INCIDENTA L OR CONSEQUENTIAL DAM AGES, RESULTING FROM THE USE OR INABILITY TO USE THE EPSON PRODUCT, OR FOR LOST DATA OR LOST SOFTWARE WH ETHER RESU LTING FROM BREACH OF WARRANTY OR ANY OTHER LEGAL TH EORY. In Canada, warran ties include both warranties and condition s.
68 P6000-7000Basics.book Page 68 We dnesday, April 23, 2008 2:25 PM.
69 Index A A/V cable, 34 AC adapter, connecting, 9 Access light, 18 , 20 Audio copying files to v iewer, 43 to 45 file formats, 43 playing, 45 to 48 problems, 57 B Backing up memory card, 21 to 24 USB.
70 F FCC Compliance Statement, 63 to 64 File formats, 26 , 43 Files copying from memory card, 21 to 24 copying to and from USB devices, 38 to 42 copying to computer, 54 to 55 deleting, 25 , 53 locking.
71 M Memory card access light, 18 , 20 adapter, 17 copying files, 21 to 24 deleting files, 25 inserting and removing , 17 to 20 types, 17 Mini-thumbnail vi ew, 29 MultiMediaCard, 17 Music copying to v.
72 T Technical support, 58 to 59 Thumbnail view, 29 Troubleshooting, 56 to 57 Turning viewer on and off, 10 TV connecting to, 34 displaying on , 34 to 35 U Unpacking, 7 USB devices connecting, 37 copy.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Epson P-6000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Epson P-6000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Epson P-6000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Epson P-6000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Epson P-6000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Epson P-6000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Epson P-6000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Epson P-6000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
