Manuale d’uso / di manutenzione del prodotto LVP-X200A del fabbricante Epson
Vai alla pagina of 45
1 ENGLISH X 20 0 LCD Projector User Manual MODEL LVP-X200A FRANÇAIS ESPAÑOL APPENDIX.
2 ENGLISH RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
3 ENGLISH Contents Important safeguards ........................................................................... 4 Overview of the projector ...................................................................... 6 Overview of the remote control ...
4 ENGLISH Important safeguards PLEASE READ ALL THESE INSTRUCTIONS RE- GARDING YOUR LCD PROJECTOR AND RET AIN THEM FOR FUTURE REFERENCE. FOLLOW ALL W ARNINGS AND INSTRUCTIONS MARKED ON THE LCD PROJECTOR. 1. Read instructions All the safety and operating instructions should be read before the appliance is operated.
5 ENGLISH WARNING: Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.
6 ENGLISH Overview of the projector Normal On Menu On PC card Menu FINE ( ) Adjust FINE (-) Select the setting item (Left) Select previous image (Left) FINE ( ) Adjust FINE(+) Select the setting item .
7 ENGLISH PC analog RGB input Use to input video signals (analog RGB) of a personal computer. (Pin assignment of Mini D-SUB 15P jack) PIN NO. SPEC PIN NO.
8 ENGLISH Overview of the remote control The operations of these buttons varies as follows depending on the modes selected: Normal On Menu On PC card Menu PinP EXPAND $ $ $ $ $ Adjust FINE (-) Select .
9 ENGLISH Important: • T o save battery power , turn off the operation indicator by pressing the ST ART/STOP button when not in use. • T o save battery power , the operation indicator will turn off if the remote control is not operated for a period of 5 minutes.
10 ENGLISH Preparing the projector for operation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector . Front projection T o find the approximate distance between the projector and screen: Multiply the width of the screen x 1.
11 ENGLISH Adjusting the angle of projection Screen on a flat wall with a 90 degree angle to the floor by adjusting two foot adjustments on the bottom of the projector . If the angle cannot be corrected by them, adjust the height and angle of screen. 1.
12 ENGLISH Cables and adapters T o connect personal computers to this projector , the following cables and adapters are necessary . The overview might be different from the picture below . RGB cables (mini D-SUB 15P plug) . Note: The pins numbered 5, 9, 12 and 15 are not connected.
13 ENGLISH Projector + IBM PC or IBM PC compatibles Make sure that your equipment is turned off before connection. Important: • Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to this projector .
14 ENGLISH Projector + Macintosh Make sure that your equipment is turned off before connection. Important: • A monitor output adapter is necessary for a Macintosh if it has no video port. Contact your dealer . • If you use the RGB conversion adapter provided, set the dip switch to the appropriate position.
15 ENGLISH Projector + NEC PC-98 series Make sure that your equipment is turned off before connection. Important: • Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to this projector . Please contact your dealer .
16 ENGLISH T o operate projector power ON Numbers 1 - 9 correspond to the instruction numbers below . Important: • A darkened image may be seen right after pressing the POWER button due to warming up of this pro- jector . When warming up, no other commands can be accepted.
17 ENGLISH AUTO POSITION button When the source is selected to RGB1 or RGB2 and the image is not in the right place, set to display as blightest signal as possible, then press the AUTO POSITION button. If the image is still not in the right place. • Set screen to the brightest display possible (e.
18 ENGLISH Basic operation Several settings can be adjusted using Menu. EXAMPLE: Brightness adjustment 1. Press the MENU button. 2. Press the or buttons on the control panel (or $ or % buttons on the remote control) to select PICTURE. 3. Press the ª or º buttons on the control panel (or { or } buttons on the remote control).
19 ENGLISH Q SIGNAL AUTO .................. Use to select AUTO, USER 1 or USER 2. HORIZ. POSITION .... Use to adjust the horizontal position of the image. VERT. POSITION ..... Use to adjust the vertical position of the image. FINE SYNC. ....... Use to synchronize the projector with PC input signals so that the image is not blurred.
20 ENGLISH E PinP/EXPAND This menu appears when either the display enlargement or PinP functions are used. ZOOM MODE ..... Selects the desired type of expand mode, type1, 2, 3 or 4 (Actual size display). POSITION .......... Selects the desired position of the sub image in expand or PinP mode.
21 ENGLISH U OPTION MOTION/STILL . Select MOTION when motion images are mainly projected. Select STILL when still images such as PC-CARD images are mainly projected. It works only when inputting personal computers of SXGA signals or inputting video signal.
22 ENGLISH Adjustment from personal computer Although this projector sets proper signal systems automatically for the image signal from personal computers, it cannot be applied to some of personal computers.
23 ENGLISH Specification of RGB signals in each computer mode of the projector Signal mode resolution horizontal V ertical Normal Native (H x V) frequency (kHz) frequency (Hz) (H x V) (H x V) TV60 – 15.73 59.94 1024 x 768 (640 x 480) TV50 – 15.63 50.
24 ENGLISH GAMMA CORRECTION menu The proportion of the brightness of input signals to that of output signals can be corrected effectively by adjusting GAMMA. 1. Select GAMMA CORRECTION of PICTURE menu and then press the ENTER button. (The GAMMA CORRECTION menu appears on-screen display .
25 ENGLISH Advanced feature for presentation Cursor operation 1. Press the CURSOR button. The cursor appears on the screen. 2. Press the ST ART/STOP button to ON. The operation indicator will be illuminated. (The operation indicator will turn off if the remote control is not used for a period of five minutes.
26 ENGLISH Advanced feature for presentation (Continue) Expand By pressing the EXP AND button on the remote con- trol, you can view the detailed image of the picture. Setting the Expand mode 1 . Press the MENU button once to display the on- screen menu.
27 ENGLISH PC-CARD The projector can play back an image by using the PC- CARD. Using the PC-CARD Use only the flash memory card of PCMCIA • A T A com- patible type II. • Due to PC-CARD type, some images can not be prop- erly recorded. Please contact your dealer .
28 ENGLISH PC-CARD (Continue) T o automatically change the image, follow the steps as shown below . 1. Press the MENU button. 2. Press the or buttons on the control panel (or $ or % buttons on the remote control) to select PC CARD AUTO PLA Y . 3. Press the ª or º buttons on the control panel (or { or } buttons on the remote control).
29 ENGLISH Advanced feature with PC There are three types of application software provided. 1. PCV (PC Card V iewer) 2. PCGC (Personal Computer Graphic Controller) 3. SpacePointer (Driver for PC control by the remote controller) Environment The following system software and hardware are nec- essary to use the projector .
30 ENGLISH Advanced feature with PC (Continue) Starting up PCV (For Windows) For W indows 95 or W indows NT 1. Start up Windows. 2. Insert the PC card to the PC Card slot on the per- sonal computer . 3. Start up Program Manager . Click the [Start] button and select the [Program ( P)] ➔ [Pcv] ➔ [PCV]command.
31 ENGLISH Recording the image (For Windows) When you wish to record the image of the display to a PC-CARD. 1. Cooose the PC-CARD drive using the drive bar under the status bar . 9. Click the return button. The presentation window will open. The recorded image appears on the presentation window .
32 ENGLISH Editing the presentation (For Windows) Delete the image 1. Select the image to be deleted. 2. Choose [ Delete image...] under the [ File] menu. • If you are using W indows 3.1, choose [Delete image] under the [Option] menu. Sequencing A. Exchange images Y ou can exchange the images among images next to each other .
33 ENGLISH 4. Click the properties button. Starting up PCV (For Macintosh) 1. Start up Macintosh. 2. Insert the PC card to the PC Card slot on the per- sonal computer . 3. Double click the [PCV for Mac] icon. Command reference The command references are as shown below: File Create New presentation .
34 ENGLISH When you wish to record the image from existing files. 1. Choose [Create New presentation...] under the [ File] menu. The new presentation window will open. 2. Choose [Open image file] under the [ File] menu. 3. Select the image you wish to record.
35 ENGLISH B. PCGC (Personal Computer Graphic Control) By connecting to personal computer is RS-232C port, you can operate your computer with the projector remote control.
36 ENGLISH Installation of software For W indows 95 1. Start up Windows. 2. Insert the Projector driver CD-ROM into your CD- ROM drive. 3. Start up Program Manager . Click the [Start] button and select the [Run (R)] com- mand. Then the [Run] dialog box is displayed.
37 ENGLISH C. SpacePointer The remote control provides remote PC operation for presentation from PC. Connection Projector + IBM PC or IBM PC compatibles (DOS/V) RS-232C cable RS-232Ccable(option) to C.
38 ENGLISH Installation of software For W indows 95 1. Start up Windows. 2. Insert the Projector driver CD-ROM into your CD- ROM drive. 3. Start up Program Manager . Click the [Start] button and select the [Run (R)] com- mand. Then the [Run] dialog box is displayed.
39 ENGLISH Uninstallation of software For W indows 95 1. Start up Windows. 2. Insert the Projector driver CD-ROM into your CD- ROM drive. 3. Start up Program Manager . Click the [Start] button and select the [Run ( R)] com- mand. Then the [Run] dialog box is displayed.
40 ENGLISH The light source lamp is designed to project the image on the LCD panel. When the light source lamp no longer functions, replace it with a new one to ensure optimum performance.
41 ENGLISH Caution: • The light source lamp is fragile. Be careful not to cut yourself with the fragments. • The lamp life depends on the environment. For re- placement lamps, please contact your dealer . The projector automatically shuts off when the lamp is used up in about 1,300 hours and not used until lamp replacement.
42 ENGLISH Maintenance Caution: Be sure to turn off the projector and unplug the power cord from the wall outlet before you perform any main- tenance on the projector .
43 ENGLISH T roubleshooting The following offers solutions to some of the common problems you may encounter . W e suggest that you consult this chart before contacting your dealer . CAUSE • The air intake vents, exhaust vents or air filter is clogged with dust or some object.
44 ENGLISH Indicators The projector has three indicators each of which shows the working condition of the projector . The following offers solutions to possible problems.
45 ENGLISH Specifications LCD projector L VP-X200A AC100 ~ 240V , 50 / 60Hz 5.0A 1.3-inch LCD panel: 3 pieces (for R, G, B) Pixels 1,024 × 768 = 786,432 pixels T otal 2,359,296 pixels Active pixel rate: 99.99 % or more (each panel) F 2.3~2.7 f = 53.3 ~ 69.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Epson LVP-X200A è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Epson LVP-X200A - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Epson LVP-X200A imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Epson LVP-X200A ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Epson LVP-X200A, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Epson LVP-X200A.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Epson LVP-X200A. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Epson LVP-X200A insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
