Manuale d’uso / di manutenzione del prodotto N Standalone (NSA) Series del fabbricante Enterasys Networks
Vai alla pagina of 1372
Enterasys Matrix ® N Standalone (NSA) Series Configuration Guide Firmware V ersion 5.41.xx P/N 9034073-08 Rev .0C.
.
i Notice Enterasys Networks reserves the right to make changes in specifications a nd other information contained in this document and its web site without p rior not ice. The reader should in all cases c onsult Enterasys Networks to determine whether any such cha nges have been made.
ii ENTERASYS NETWORKS, INC. FIRMWARE LICENSE AGREEMENT BEFORE OPENING OR UTILIZING THE ENCLOSED PRODUCT , CAREFULL Y READ THI S LICENSE AGREEMENT . This document is an agreement (“Agreement”) between the e nd user (“Y ou”) and Enterasys Networks, Inc.
iii 3. APPLICABLE LAW. This Agreement shall be interpreted and governed under the laws and in the state and federal courts of the Commonwealth of Massachusetts without regard to its conflicts of laws pr ovisions. You accep t the personal jurisdiction and venue of the Commonwealth of Massachusetts courts.
iv 8. AUDIT RIGHTS. You hereby acknowledge that the inte llectual property rights associ ated with the Program are of critical value to Enterasys and, accord ingly, You hereby agree to maintain complete books, re cords and accounts showing (i) license fees due and paid, and ( ii) the use, copying and deployment of the Pr ogram.
Matrix NSA Series Configuration Guide v Content s Figures ................ ............. ............. ............. ................ ............. ............. ............. ......................... ..... xi Tables........... ............. ........
Contents vi Matrix NSA Series Configu ration Guide 2.2 General Configuration Command Set .................... ................ ................ ....... 2-24 2.2.1 Setting User Accounts and Pa ssw ords ......... ............. ............ ....... 2-24 2.
Contents Matrix NSA Series Configuration Guide vii 4.4 Configuring Port Mirroring ................ ................ ................ ................ ............. 4-87 4.4.1 Supported Mirrors ...................... ... ... ... ............. .... ... .
Contents viii Matrix NSA Series Configuration Guide 7 802.1Q VLAN CONFIGURATION 7.1 VLAN Configuration Summary ............... ................ ................ ................ ......... 7-1 7.1.1 Port Assignment Scheme ... ................ .........
Contents Matrix NSA Series Configuration Guide ix 11 LOGGING AND NETW ORK MANAGEMENT 11.1 Process Overview: Network Management .............. ... ... ... .... ... ... ... ....... ... ... ... 11-1 11.2 Logging And Network M anagement Command Set ......
Contents x Matrix NSA Series Configura tion Guide 14 SECURITY CONFIGURATION 14.1 Overview of Security Methods ......... ......... ............. ................ ............. .......... 14-1 14.1.1 RADIUS Filter-ID Attrib ute and Dynamic Policy Profile Assignment14-3 14.
Matrix NSA Series Configuration Guide xi Figures Figure Page 2-1 Sample CLI Default Description ............. ................ ................. ................ ................ ........ 2-9 2-2 Matrix N Standalone Startu p Screen ... ... .... ......
Figures xii Matrix NSA Series Configuration Guide.
Matrix NSA Series Configuration Guide xiii Ta b l e s Ta b l e Page 2-1 Default Device Settings for Basic Switch Operation ......... ............. ................ ............. .. 2-1 2-2 Default Device Settings for Router Mode O peration ...........
T ables xiv Matrix NSA Series Configu ration Guide 5-11 Basic SNMP Trap Configuration Command Set ............... ............. ............. ............. ... 5-64 6-1 show spantree Output Deta ils ................... ............. ............. ....
Ta b l e s Matrix NSA Series Configuration Guide xv 12-13 show ip dhcp server statistics Ou tput Details ............. ............. ................ ............. .. 12-138 13-1 RIP Configuration Task Li st and Commands .......... ............. ... .
T ables xvi Matrix NSA Series Configur ation Guide.
Enterasys Matrix ® N S tandalone (NSA) Series Configuration Guide xvii About This Guide W elcome to the Enterasys Enterasys Matrix ® N S tandalone (NS A) Series Config uration Guide . This manual explains how to access th e device’ s Command Line Interface (CLI) and how to use it to configure Matrix Series switch/router devices.
xviii Enterasys Matrix ® N S tandalone (NSA) Series Configura tio n Guide S TRUCTURE OF THIS GUIDE The guide is organized as follows: Chapter 1 , Intr oduction , provides an overview of the tasks th at can be accomplished using the CLI interface, an overview of lo cal management requirements, and inform ation about obtaining technical support.
Enterasys Matrix ® N St andalone (NSA) Series Configuration Guide xix Chapter 9 , Port Priority and Rate Limiting Configuration , describes how to s et the transmit priority of each port, display the.
xx Enterasys Matrix ® N St andalo ne (NSA) Series Configu ration Guide DOCUMENT CONVENTIONS This guide uses the following conventions: The following icons are used in this guide: bold type Bold type indicates required user input, including command keywords, that must be entered as shown for the command to execute.
Matrix NSA Series Configurati on Guide 1-1 1 Introduction This chapter provides an overview of the Matrix Series’ unique features and functionality , an overview of the tasks that may be accomplished us ing the CLI interface, an overview of ways to manage the device , an d information on ho w to co ntact Enterasys Networks for technical support.
Matrix Series CLI Overview 1-2 Matrix NSA Series Configuration Guide 1.2 MATRIX SERIES CLI OVERVIEW Enterasys Networks’ Matrix Series CLI interface allows you to perform a variety of network management tasks, including the following: • Assign IP address and subnet mask.
Device Management Methods Matrix NSA Series Configuration Guide 1-3 1.3 DEVICE MANAGEMENT METHODS The Matrix Series device can be m anaged using the fo llo wing methods: • Locally using a VT type terminal connected to the console port. • Remotely using a VT type term inal connec ted through a modem.
Getting H elp 1-4 Matrix NSA Series Configuration Guide • A description of yo ur network environm ent (for example, la yout, cable type) • Network load and frame size at the time of trouble (if kn.
Matrix NSA Series Configurati on Guide 2-1 2 S tartup and General Configuration This chapter describes factory default settings an d the S tartup and General Configuration set of commands. 2.1 ST ARTUP AND GENERAL CONFIGURATION SUMMARY At startup, the Matrix Series de vice is configured with many defaults and standard features.
S t artup a nd General Configu ration Summary Factory Default Settings 2-2 Matrix NSA Series Configuration Guide Does not apply to MA TRIX E7. Community name Public. Conver gence End Points phone detection Disabled globally and on all ports EAPOL Disabled.
S tartup and General Configuration Summary Factory Default Settings Matrix NSA Series Configuration Guide 2-3 LLDP trap interval 5 seconds LLDP-MED fast repeat 3 fast start LLDPDUs LLDP traps Disabled.
S t artup a nd General Configu ration Summary Factory Default Settings 2-4 Matrix NSA Series Configuration Guide Policy classification Classification rules ar e automatically enabled when created. Port auto-negotiation Enabled on all ports. Port advertised ability Maximum ability advertised on all ports.
S tartup and General Configuration Summary Factory Default Settings Matrix NSA Series Configuration Guide 2-5 Spanning T ree edge port delay Enabled. Spanning T ree forward delay Set to 15 seconds . Spanning T ree hello interval Set to 2 seconds. Spanning T ree ID (SID) Set to 0 .
S t artup a nd General Configu ration Summary Factory Default Settings 2-6 Matrix NSA Series Configuration Guide Spanning T ree Loop Protect event window 180 se conds. Spanning T ree Loop Protect traps Disabled. Spanning T ree disputed BPDU threshold Set to 0, meaning no traps are sent.
S tartup and General Configuration Summary Factory Default Settings Matrix NSA Series Configuration Guide 2-7 T able 2-2 Default Device Settings f or Router Mode Operation Device Fe ature Default Setting Access groups (IP security) None configured. Access lists (IP security) None configured.
S t artup a nd General Configu ration Summary Factory Default Settings 2-8 Matrix NSA Series Configuration Guide IP-directed broadcasts Disabled. IP forward-protocol Enabled with no po rt specified. IP interfaces Disabled with no IP addresses specified.
S tartup and General Configuration Summary CLI “Command Defaults” Descriptions Matrix NSA Series Configuration Guide 2-9 2.1.2 CLI “Command De fault s” Descriptions Each command description in.
S t artup a nd General Configu ration Summary Using WebView 2-10 Matrix NSA Series Configuration Gui de well as view Read-Only commands. Administrators or Super Users will be allowed al l Read-W rite and Read-Only privileges, and will be able to modify local user accounts.
S tartup and General Configuration Summary Process Overview: CLI St artup and General Configuration Matrix NSA Series Configuration Guide 2-1 1 This example shows how to set the W ebV iew TCP port to 100.
S t artup a nd General Configu ration Summary S tarting and Navigatin g the Command Line In terface 2-12 Matrix NSA Series Configuration Gui de 2.1.6 St arting and Navigating the Command Line Interface 2.
S tartup and General Configuration Summary S tarting and Navigating the Command Line Interface Matrix NSA Series Configuration Guide 2-13 2.1.6.3 Logging in with Administ ratively Configured Account If the device’ s default user account settings have been changed, proceed as follows: 1.
S t artup a nd General Configu ration Summary S tarting and Navigatin g the Command Line In terface 2-14 Matrix NSA Series Configuration Gui de Figure 2-2 Matrix N S tandalone S tart up Screen 2.
S tartup and General Configuration Summary S tarting and Navigating the Command Line Interface Matrix NSA Series Configuration Guide 2-15 2.1.6.7 Performing Keyword Lookups Entering a space and a question mark ( ?) after a keyword will display all commands beginning with the keyword.
S t artup a nd General Configu ration Summary S tarting and Navigatin g the Command Line In terface 2-16 Matrix NSA Series Configuration Gui de 2.1.6.8 Displaying Scrolling Screens If the CLI screen length has been set using the set length command a s described in Section 2.
S tartup and General Configuration Summary Configuring the Line Editor Matrix NSA Series Configuration Guide 2-17 2.1.6.9 Abb reviating and Complet ing Commands The Matrix Series device allows you to abbrev iate CLI commands and keywords down to the number of characters that will allow for a unique abbreviation.
S t artup a nd General Configu ration Summary Configuring the Li ne Editor 2-18 Matrix NSA Series Configuration Gui de T able 2-3 Basic Line Edit ing Emacs & vi Commands Key Sequence Emacs Command Ctrl+A Move cursor to beginning o f line. Ctrl+B Move cursor back one character .
S tartup and General Configuration Summary Configuring the Line Editor Matrix NSA Series Configuration Guide 2-19 k Get previous shell command in history j Get next shell command in history $ Go to en.
S t artup a nd General Configu ration Summary Configuring the Li ne Editor 2-20 Matrix NSA Series Configuration Gui de Commands The commands used to co nfigure the line-editor are listed belo w and described in the associated sections as shown. • show line-editor ( Section 2.
S tartup and General Configuration Summary Configuring the Line Editor Matrix NSA Series Configuration Guide 2-21 2.1.7.1 s how line-editor Use this command to show curre nt and default line-editor mode and Delete character m ode. show line-editor Command Default s None.
S t artup a nd General Configu ration Summary Configuring the Li ne Editor 2-22 Matrix NSA Series Configuration Gui de 2.1.7.2 set line-editor Use this command to set the curre nt and default line editing mode or the way the Delete character is treated by the line editor .
S tartup and General Configuration Summary Configuring the Line Editor Matrix NSA Series Configuration Guide 2-23 This example sets the default line -editor to emacs mode and sets th e selection to pe.
General Configurati on Command Set Setting User Accounts and Passwords 2-24 Matrix NSA Series Configuration Gui de 2.2 GENERAL CONFIG URATION COMMAND SET 2.2.1 Setting User A cco unt s and Passwords Purpose T o change the device’ s default user login and password settings, and to ad d new user accounts and passwords.
General Configurati on Command Set Setting User Accounts and Passwords Matrix NSA Series Configuration Guide 2-25 2.2.1.1 show system login Use this command to display us er logi n account information. show system login Synt ax Description None. Command Default s None.
General Configurati on Command Set Setting User Accounts and Passwords 2-26 Matrix NSA Series Configuration Gui de T able 2-4 show system login Output Details Output What It Displays... Password hist ory size Number of previously used us er login passwords that will be checked for duplication when the set password command is executed.
General Configurati on Command Set Setting User Accounts and Passwords Matrix NSA Series Configuration Guide 2-27 2.2.1.2 set system login Use this command to create a new user login acc ount , or to disable or enable an existing account.
General Configurati on Command Set Setting User Accounts and Passwords 2-28 Matrix NSA Series Configuration Gui de 2.2.1.3 clear system login Use this command to remove a local login user account. clear system login username Synt ax Description Command Default s None.
General Configurati on Command Set Setting User Accounts and Passwords Matrix NSA Series Configuration Guide 2-29 2.2.1.4 set p assword Use this command to change system default passwords or to set a new login password on the CLI. set password [ username ] Synt ax Description Command Default s None.
General Configurati on Command Set Setting User Accounts and Passwords 2-30 Matrix NSA Series Configuration Gui de Examples This example shows how a super-user would ch ange the Read-W rite password f.
General Configurati on Command Set Setting User Accounts and Passwords Matrix NSA Series Configuration Guide 2-31 2.2.1.5 set system p assword length Use this command to set the mi nimum u ser login password length. set system password length characters Synt ax Description Command Default s None.
General Configurati on Command Set Setting User Accounts and Passwords 2-32 Matrix NSA Series Configuration Gui de 2.2.1.6 set system p assword aging Use this command to set th e number of days user passwords will remain valid before aging out, or to disable user acco unt password aging.
General Configurati on Command Set Setting User Accounts and Passwords Matrix NSA Series Configuration Guide 2-33 2.2.1.7 set system p assword history Use this command to set the number of previously used user logi n passwords that will be checked for password duplication.
General Configurati on Command Set Setting User Accounts and Passwords 2-34 Matrix NSA Series Configuration Gui de 2.2.1.8 show system lockout Use this command to display settings for locking out users after fail ed attempts to log in to the system. show system lockout Synt ax Description None.
General Configurati on Command Set Setting User Accounts and Passwords Matrix NSA Series Configuration Guide 2-35 2.2.1.9 set system lockout Use this command to set the numb er of failed login attempt.
General Configurati on Command Set Managing the Management Authentica ti on Notification MIB 2-36 Matrix NSA Series Configuration Gui de 2.2.2 Managing the Management A uthentication Notification MIB .
General Configurati on Command Set Managing the Ma nagement Authentication No tification MIB Matrix NSA Series Configuration Guide 2-37 2.2.2.1 s how mgmt-auth-notify Use this command to display th e current setting for the Manageme nt Authentication Notification MIB.
General Configurati on Command Set Managing the Management Authentica ti on Notification MIB 2-38 Matrix NSA Series Configuration Gui de 2.2.2.2 set mgmt-auth-notify Use this command to either enab le or disable the Management Authentication Notification MIB.
General Configurati on Command Set Managing the Ma nagement Authentication No tification MIB Matrix NSA Series Configuration Guide 2-39 Examples This example shows how to set all the authentication types to be disabled on the Management Authentication Notification MIB.
General Configurati on Command Set Managing the Management Authentica ti on Notification MIB 2-40 Matrix NSA Series Configuration Gui de 2.2.2.3 c lear mgmt-auth-notify Use this command to set the current setting for the Management Authenti cation Notification ac cess types to the default setting of enabled.
General Configurati on Command Set Managing the Ma nagement Authentication No tification MIB Matrix NSA Series Configuration Guide 2-41 Example This example displays the state of Management Authentica.
General Configurati on Command Set Setting Basic Device Properties 2-42 Matrix NSA Series Configuration Gui de 2.2.3 Setting Basic Device Properti es Purpose T o display and set the system IP address .
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-43 • set summertime date ( Section 2.2.3.16 ) • set summertime recurring ( Section 2.2.3.17 ) • clear summertime ( Section 2.2.3.18 ) • set prompt ( Section 2.
General Configurati on Command Set Setting Basic Device Properties 2-44 Matrix NSA Series Configuration Gui de 2.2.3.1 show ip address Use this command to display the sy stem IP address and subnet ma sk. show ip address Synt ax Description None. Command Default s None.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-45 2.2.3.2 set ip address Use this command to set the system IP ad dress, subnet mask and default gateway .
General Configurati on Command Set Setting Basic Device Properties 2-46 Matrix NSA Series Configuration Gui de 2.2.3.3 clear ip address Use this command to clear the system IP address. clear ip address Synt ax Description None. Command Default s None.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-47 2.2.3.4 s how ip gratuitous-arp Use this command to display th e gratuitous ARP processing behavior . show ip gratuitous -arp Synt ax Description None.
General Configurati on Command Set Setting Basic Device Properties 2-48 Matrix NSA Series Configuration Gui de 2.2.3.5 set ip gratuitous-arp Use this command to control the gr atuitous ARP processing beha vior . set ip gratuitous-arp [request] [reply] [both] ] Synt ax Description Command Default s Disabled by default Command T ype Switch command.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-49 2.2.3.6 clear ip gratuitous-arp Use this command to stop a ll gratuitous ARP processing. clear ip gratuitous-arp Synt ax Description None. Command Default s None.
General Configurati on Command Set Setting Basic Device Properties 2-50 Matrix NSA Series Configuration Gui de 2.2.3.7 show system Use this command to display system information, including contact informa tion, power and fan tray status and uptime. show system Synt ax Description None.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-51 T able 2-6 show system Output Det ails Output What It Displays... System contact Contact person for the sy stem. Default of a blank string can be changed with the set s ystem contact command ( Section 2.
General Configurati on Command Set Setting Basic Device Properties 2-52 Matrix NSA Series Configuration Gui de 2.2.3.8 show system hardware Use this command to display the system’ s hardware configuration. show system hardware Synt ax Description None.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-53 Matrix(rw)-> show system hardware CHASSIS HARDWARE INFORMATION ------------------------.
General Configurati on Command Set Setting Basic Device Properties 2-54 Matrix NSA Series Configuration Gui de 2.2.3.9 show system utilization Use this command to display system resource utilization information.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-55 ** Output continued from previous page ** Process Utilization: Slot: 1 CPU: 1 Name Pr ocID 5 sec 1 min 5 min --------------------------------- --------------------------- CLI 1 0.
General Configurati on Command Set Setting Basic Device Properties 2-56 Matrix NSA Series Configuration Gui de ** Output continued from previo us page ** Name ProcID 5 sec 1 min 5 min ------------------------------- ----------------------------- Switch Web Server 34 1.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-57 2.2.3.10 set system utilization threshold Use this command to set the threshold for sending CPU utilization notification messages. The value range is [1.
General Configurati on Command Set Setting Basic Device Properties 2-58 Matrix NSA Series Configuration Gui de 2.2.3.1 1 clear system utilization Use this command to clear the threshold for sending CPU utilization notification messages. clear system utilization Synt ax Description None.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-59 2.2.3.12 show time Use this command to display the current time of day in the system clock. show time Synt ax Description None. Command Default s None.
General Configurati on Command Set Setting Basic Device Properties 2-60 Matrix NSA Series Configuration Gui de 2.2.3.13 set time Use this command to ch ange the time of day on the system cl ock. set time [ mm/dd/yyyy ] [ hh:mm:ss ] Synt ax Description Command Default s None.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-61 2.2.3.14 show summertime Use this command to display daylight savings time settings. show summertime Synt ax Description None. Command Default s None.
General Configurati on Command Set Setting Basic Device Properties 2-62 Matrix NSA Series Configuration Gui de 2.2.3.15 set summertime Use this command to enable or disa ble the daylight savings time function. set summertime { enable | disable } [ zone ] Synt ax Description Command Default s If a zone name is not specified, none will be applied.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-63 2.2.3.16 set summertime date Use this command to configure specific dates to start and stop daylight savings time. These settings will be non-recurring and will have to be reset annuall y .
General Configurati on Command Set Setting Basic Device Properties 2-64 Matrix NSA Series Configuration Gui de Example This example shows how to set a da ylight savings time start date of April 4, 2004 at 2 a.m. and an ending date of Octobe r 31, 2004 at 2 a.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-65 2.2.3.17 set summertime recurring Use this command to configure recurring dayli ght savings time settings.
General Configurati on Command Set Setting Basic Device Properties 2-66 Matrix NSA Series Configuration Gui de Example This example shows how set daylight savings time to recur start date of April 4, 2004 at 2 a.m. and an ending date of October 31 , 2004 at 2 a.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-67 2.2.3.18 clear summertime Use this command to clear the da ylight savings time configuration. clear summertime Synt ax Description None. Command Default s None.
General Configurati on Command Set Setting Basic Device Properties 2-68 Matrix NSA Series Configuration Gui de 2.2.3.19 set prompt Use this command to modi fy the command prompt. set prompt “prompt_string” Synt ax Description Command Default s None.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-69 2.2.3.20 set cli completion Use this command to enable or disable the CLI command completion function . When enabled, this allows you to complete a un ique CLI command fragment using the keyboard spacebar .
General Configurati on Command Set Setting Basic Device Properties 2-70 Matrix NSA Series Configuration Gui de 2.2.3.21 loop Use this command to execute a command loop. loop count [ delay ] [ -r ] Synt ax Description Command Default s • If a delay is not specified, none will be set.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-71 2.2.3.22 show banner mot d Use this command to show the banner message of the day that w ill display at session login. show banner motd Synt ax Description None.
General Configurati on Command Set Setting Basic Device Properties 2-72 Matrix NSA Series Configuration Gui de 2.2.3.23 set bann er mot d Use this command to set the banner messag e of the day displayed at session login. set banner motd message Synt ax Description Command Default s None.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-73 2.2.3.24 clear banner mot d Use this command to clear the banner message of the day displayed at session login to a blank string. clear banner motd Synt ax Description None.
General Configurati on Command Set Setting Basic Device Properties 2-74 Matrix NSA Series Configuration Gui de 2.2.3.25 show versio n Use this command to display hardware and firmware information. Refer to Section 2.2.5 for instructions on how to do wnload a firmware image.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-75 2.2.3.26 set system name Use this command to config ure a name for the system. set system name [ string ] Synt ax Description Command Default s If string is not specified, the syst em name wil l be cleared.
General Configurati on Command Set Setting Basic Device Properties 2-76 Matrix NSA Series Configuration Gui de 2.2.3.27 set system l ocation Use this command to identify the loca tion of the system. set system location [ string ] Synt ax Description Command Default s If string is not specified, the loca tion name will be cleared.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-77 2.2.3.28 set system contact Use this command to identify a contact person for the system. set system contact [ string ] Synt ax Description Command Default s If string is not specified, the co ntact name will be cleared.
General Configurati on Command Set Setting Basic Device Properties 2-78 Matrix NSA Series Configuration Gui de 2.2.3.29 set width Use this command to set the number of columns for the terminal co nnected to the device’ s console port. The length of the CLI is set using the set length co mm an d as described in Section 2.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-79 2.2.3.30 set length Use this command to set the number of lines the CLI will display . set length scr eenlength Synt ax Description Command Default s None.
General Configurati on Command Set Setting Basic Device Properties 2-80 Matrix NSA Series Configuration Gui de 2.2.3.31 show log out Use this command to display the time (in seconds) an idle console or T elnet CLI session will remain connected before timing out.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-81 2.2.3.32 set logout Use this command to set the time (in minutes) an idle console or T elnet CLI session will remain connected before timing out.
General Configurati on Command Set Setting Basic Device Properties 2-82 Matrix NSA Series Configuration Gui de 2.2.3.33 show physical alias Use this command to display th e alias, a text name, for one or more physical objects.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-83 Example This example shows how to display physical alia s information for the chassi s.
General Configurati on Command Set Setting Basic Device Properties 2-84 Matrix NSA Series Configuration Gui de 2.2.3.34 set physical alias Use this command to set the alias, a text name, for a physical object.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-85 Command Mode Read-W rite. Example This example shows how to set the alias for the chassis .
General Configurati on Command Set Setting Basic Device Properties 2-86 Matrix NSA Series Configuration Gui de 2.2.3.35 clear physical alias Use this command to reset the alias for a physical object to a zero-length string.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-87 2.2.3.36 show physical assetid Use this command to display the asset ID for a module. show physical assetid module module Synt ax Description Command Default s None.
General Configurati on Command Set Setting Basic Device Properties 2-88 Matrix NSA Series Configuration Gui de 2.2.3.37 set physical assetid Use this command to set the asset ID for a module. set physical assetid module module string Synt ax Description Command Default s None.
General Configurati on Command Set Setting Basic Device Properties Matrix NSA Series Configuration Guide 2-89 2.2.3.38 clear physical assetid Use this command to reset the asset ID for a moduleto a zero-length string . clear physical assetid module module Synt ax Description Command Default s None.
General Configurati on Command Set Activating Licensed Features 2-90 Matrix NSA Series Configuration Gui de 2.2.4 Activating Licensed F eatures In order to enable advanced features, such as ro uting protocols, and extended ACLs on a Matrix Series device, you must purchase and activate a license key .
General Configurati on Command Set Activating Licensed F eatures Matrix NSA Series Configuration Guide 2-91 2.2.4.1 set license When an advanced license is available, use this command to activate licen sed features. If this is available on your Matrix Series device, a unique license key will display in the show license command output.
General Configurati on Command Set Activating Licensed Features 2-92 Matrix NSA Series Configuration Gui de 2.2.4.2 show license When available and activated, use this command to display your license key . show license Synt ax Description None. Command T ype Switch command.
General Configurati on Command Set Activating Licensed F eatures Matrix NSA Series Configuration Guide 2-93 2.2.4.3 clear license Use this command to clear license key settings. Synt ax Description Command T ype Switch command. Command Mode Read-W rite.
General Configurati on Command Set Downloading a Ne w Firmware Image 2-94 Matrix NSA Series Configuration Gui de 2.2.5 Downloading a New Firmware Image Y ou can upgrade the op erational firmware in the Matrix Series device without physicall y opening the device or being in the same location.
General Configurati on Command Set Downloading a New Firmware Imag e Matrix NSA Series Configuration Guide 2-95 2.2.5.1 D ownloading from an FTP or TFTP Server T o perform an FTP or TFTP do wnload, proceed as follows: 1. If you have not already done so, set the device’s IP address using the set ip address command as detailed in Section 2.
General Configurati on Command Set Downloading a Ne w Firmware Image 2-96 Matrix NSA Series Configuration Gui de 3. Type 2 . The following baud rate selection screen displays: 4. Type 8 to set the device baud rate to 115200 . The following message displays: 5.
General Configurati on Command Set Reviewing and Selecting a Boot Firmware Image Matrix NSA Series Configuration Guide 2-97 11. Type boot to reboot the device.
General Configurati on Command Set Reviewing and Sele cting a Boot Firmware Image 2-98 Matrix NSA Series Configuration Gui de 2.2.6.1 show boot system Use this command to display the fi rmware image t he system will load at the next system reset. The system must be reset by software for the new boot image to take effect at startup.
General Configurati on Command Set Reviewing and Selecting a Boot Firmware Image Matrix NSA Series Configuration Guide 2-99 2.2.6.2 set boot system Use this command to set the firmwa re image the switch loads at startu p. This is the image t hat will be loaded automatically afte r th e system has been reset.
General Configurati on Command Set S tarting and Configuri ng T elnet 2-100 Matrix NSA Series Configuration Guide 2.2.7 St arting and Configuring T e lnet Purpose T o enable or disable T elne t, and to start a T elnet s ession to a remote host.
General Configurati on Command Set S tarting and Configurin g T e lnet Matrix NSA Series Configu ration Guide 2-1 01 2.2.7.1 show telnet Use this command to display the status of T elnet on the device. show telnet Synt ax Description None. Command Default s None.
General Configurati on Command Set S tarting and Configuri ng T elnet 2-102 Matrix NSA Series Configuration Guide 2.2.7.2 set telnet Use this command to enable or disable T elnet on the device. set telnet { enable | disabl e }{ inbound | outbound | all } Synt ax Description Command Default s None.
General Configurati on Command Set S tarting and Configurin g T e lnet Matrix NSA Series Configu ration Guide 2-1 03 2.2.7.3 telnet Use this command to start a T elnet connection to a remote host. Th e Matrix Series device allows a total of four inbou nd and / or outbound T elnet session to run simultaneously .
General Configurati on Command Set S tarting and Configuri ng T elnet 2-104 Matrix NSA Series Configuration Guide 2.2.7.4 show rou ter telnet Use this command to display the state of T elnet service to the router . show router telnet Synt ax Description None.
General Configurati on Command Set S tarting and Configurin g T e lnet Matrix NSA Series Configu ration Guide 2-1 05 2.2.7.5 set router telnet Use this command to enable or disable T elnet service to the router interface IP address. set router telnet { enable | disable } Synt ax Description None.
General Configurati on Command Set S tarting and Configuri ng T elnet 2-106 Matrix NSA Series Configuration Guide 2.2.7.6 clear router telnet Use this command to reset T elnet service to th e router to the default state of disabled. clear router telnet Synt ax Description None.
General Configurati on Command Set Managing Configuration and Image Files Matrix NSA Series Configu ration Guide 2-1 07 2.2.8 Managing Co nfiguration and Image Files Matrix Series devices provide a single configura tion interface which allows you to perform both switch and router configuration with the same co mma nd set.
General Configurati on Command Set Managing Configuratio n and Image Files 2-108 Matrix NSA Series Configuration Guide 2.2.8.1 dir Use this command to list file s stored in the file system. dir [ filename ] Synt ax Description Command T ype Switc h. Command Mode Read-Only .
General Configurati on Command Set Managing Configuration and Image Files Matrix NSA Series Configu ration Guide 2-1 09 Location Modules on which this image resides. Compatibility Module types on which this image is qualified to run. Attempting to run an incomp atible image on a given module will not succeed.
General Configurati on Command Set Managing Configuratio n and Image Files 2-1 10 Matrix NSA Series C onfiguration Guide 2.2.8.2 show file Use this command to display the contents of an image or configuration file. show file filename Synt ax Description Command T ype Switc h.
General Configurati on Command Set Managing Configuration and Image Files Matrix NSA Series Configuration Guide 2-1 1 1 2.2.8.3 show config Use this command to display the system config uration or write the configuration to a file. show config [ all ] [ facility ] [ outfile outfile ] Synt ax Description Command T ype Switch.
General Configurati on Command Set Managing Configuratio n and Image Files 2-1 12 Matrix NSA Series C onfiguration Guide Example This example shows how to display the cu rrent non-default device configuration: Matrix(rw)-> show config This command shows non-default configurations only.
General Configurati on Command Set Managing Configuration and Image Files Matrix NSA Series Configuration Guide 2-1 13 2.2.8.4 configure Use this command to execute a pr eviously downloaded configuration file stored on the device. configure filename [ append ] Synt ax Description Command T ype Switch.
General Configurati on Command Set Managing Configuratio n and Image Files 2-1 14 Matrix NSA Series C onfiguration Guide 2.2.8.5 copy Use this command to upload or download an image or a CLI configuration file. copy source destination Synt ax Description Command T ype Switc h.
General Configurati on Command Set Managing Configuration and Image Files Matrix NSA Series Configuration Guide 2-1 15 This example shows how to uplo ad a configuration file via A nonymous FTP from th.
General Configurati on Command Set Managing Configuratio n and Image Files 2-1 16 Matrix NSA Series C onfiguration Guide 2.2.8.6 delete Use this command to remove an image or a CL I configuration file from the Matrix system. delete filename Synt ax Description Command T ype Switc h.
General Configurati on Command Set Managing Configuration and Image Files Matrix NSA Series Configuration Guide 2-1 17 2.2.8.7 script Use this command to execute a script file. The script file must first be created on a PC and copied to the Matrix device using the copy command ( Section 2.
General Configurati on Command Set Managing Configuratio n and Image Files 2-1 18 Matrix NSA Series C onfiguration Guide When the script command parses the file and performs the command line argument substitution, the commands are convert ed to the following: set port alias fe.
General Configurati on Command Set Enabling or Disabling th e Path MTU Discovery Protocol Matrix NSA Series Configuration Guide 2-1 19 2.2.9 Enabling or Disabling the Path MTU Discovery Protocol Purpose T o enable or disable the path MTU (Maximum T ransmission Unit) discovery prot ocol on the device.
General Configurati on Command Set Enabling or Disabling the Path MTU Discovery P rotocol 2-120 Matrix NSA Series Configuration Guide 2.2.9.1 show mtu Use this command to display the status of th e path MT U discovery protocol on the device. show mtu Synt ax Description None.
General Configurati on Command Set Enabling or Disabling th e Path MTU Discovery Protocol Matrix NSA Series Configu ration Guide 2-1 21 2.2.9.2 set mtu Use this command to disable or re-enab le pa th MTU discovery protocol on the device. set mtu { enable | disable } Synt ax Description Command Default s None.
General Configurati on Command Set Enabling or Disabling the Path MTU Discovery P rotocol 2-122 Matrix NSA Series Configuration Guide 2.2.9.3 clear mtu Use this command to reset the state of the path MTU discovery protocol back to enabled. clear mtu Synt ax Description None.
General Configurati on Command Set Pausing, Clearing and Closing the CLI Matrix NSA Series Configu ration Guide 2-1 23 2.2.10 Pausing , Cleari ng and Closing the CLI Purpose T o pause or clear the CLI screen or to close your CLI session.
General Configurati on Command Set Pausing, Clearing and Closing the CLI 2-124 Matrix NSA Series Configuration Guide 2.2.10.1 wait Use this command to pause the CLI for a specified number of seconds before executing the nex t command. wait seconds Synt ax Description Command Default s None.
General Configurati on Command Set Pausing, Clearing and Closing the CLI Matrix NSA Series Configu ration Guide 2-1 25 2.2.10.2 cls (clear screen) Use this command to clear the sc reen for the current CLI s ession. cls Synt ax Description None . Command Default s None.
General Configurati on Command Set Pausing, Clearing and Closing the CLI 2-126 Matrix NSA Series Configuration Guide 2.2.10.3 exit | quit Use either of these comman ds to leave a CLI session. exit quit Synt ax Description None. Command Default s None.
General Configurati on Command Set Resetting the Device Matrix NSA Series Configu ration Guide 2-1 27 2.2.1 1 Resetting the Device Purpose T o reset one or more device modules, to clear the user -defined switch an d router configura tion parameters, or to schedule a system re set in order to load a new boot image.
General Configurati on Command Set Resetting the Device 2-128 Matrix NSA Series Configuration Guide 2.2.1 1.1 show reset Use this command to display inform ation about scheduled device resets. show reset Synt ax Description None. Command Default s None.
General Configurati on Command Set Resetting the Device Matrix NSA Series Configu ration Guide 2-1 29 2.2.1 1.2 reset Use this command to rese t the device without losing any user -d efined configuration settings or to display information ab out device resets.
General Configurati on Command Set Resetting the Device 2-130 Matrix NSA Series Configuration Guide This example shows how to cancel a scheduled system reset: This example shows how to reset a Matrix Secu rity Module installed on the DFE in slot 4. Matrix(rw)-> reset cancel Reset cancelled.
General Configurati on Command Set Resetting the Device Matrix NSA Series Configu ration Guide 2-1 31 2.2.1 1.3 reset at Use this command to schedule a system reset a t a sp ecific future time.
General Configurati on Command Set Resetting the Device 2-132 Matrix NSA Series Configuration Guide 2.2.1 1.4 reset in Use this command to schedule a system reset after a specific tim e.
General Configurati on Command Set Resetting the Device Matrix NSA Series Configu ration Guide 2-1 33 2.2.1 1.5 clear config Use this command to clear the u ser -defined switch and router c onf iguration parameters for one or more modules. Executing clear config on one Matrix module resets that modu le back to its factory defaults.
General Configurati on Command Set Gathering T echnical Support Information 2-134 Matrix NSA Series Configuration Guide 2.2.12 Gathering T echni cal Support Information Purpose T o gather common techni cal support information.
General Configurati on Command Set Gathering T echnical Suppo rt Information Matrix NSA Series Configu ration Guide 2-1 35 2.2.12.1 show support Use this command to display output for technical support-related commands. show support [ filename ] Synt ax Description Command Default s The following commands are executed: • show version ( Section 2.
General Configurati on Command Set Gathering T echnical Support Information 2-136 Matrix NSA Series Configuration Guide Example This exa mple sho ws how to execute the show support command and s ave the results to slot 1 as a support3.txt file: There is no display example as the list of commands is quite lengthy .
Preparing the Device fo r Router Mode Pre-Routing Configuration T asks Matrix NSA Series Configu ration Guide 2-1 37 2.3 PREP ARING THE DEVICE FOR ROUTER MODE 2.3.1 Pre-Routing Configuration T asks The following pre-routin g tasks, as detailed in Section 2.
Preparing the Device for Router Mode Pre-Routing Configuration T asks 2-138 Matrix NSA Series Configuration Guide The example in Figure 2-8 shows how to: • Configure module 1 as a routin g module. T able 2-9 Enabling the Switch for Ro uting T o do this task.
Preparing the Device fo r Router Mode Reviewing and Configuring Rou ting Matrix NSA Series Configu ration Guide 2-1 39 • Configure VLAN 1 on IP address 182.127.63.1 255.255.255.0 as the routing interface for that module. Figure 2-8 Enabling the Switch for Routing 2.
Preparing the Device for Router Mode Reviewing and Con figuring Routing 2-140 Matrix NSA Series Configuration Guide 2.3.2.1 show rou ter Use this command to display which modules are configured for routing. show router Synt ax Description None. Command Default s None.
Preparing the Device fo r Router Mode Reviewing and Configuring Rou ting Matrix NSA Series Configu ration Guide 2-1 41 2.3.2.2 set router Use this command to config ure routing on a module. set router module Synt ax Description Command Default s None.
Preparing the Device for Router Mode Reviewing and Con figuring Routing 2-142 Matrix NSA Series Configuration Guide 2.3.2.3 clear router Use this command to disable routin g on a module. clear router module Synt ax Description Command Default s None. Command T ype Switch command.
Preparing the Device fo r Router Mode Reviewing and Configuring Rou ting Matrix NSA Series Configu ration Guide 2-1 43 2.3.2.4 router Use this command to enable routi ng mode on a module. This must be a module previously configured for routing using the set router command as described in Section 2.
Preparing the Device for Router Mode Enabling Router Configu ration Modes 2-144 Matrix NSA Series Configuration Guide 2.3.3 Enabling Router Configuration Modes The Matrix CLI provides dif ferent modes of router operation for issuing a subset of commands from each mode.
Preparing the Device fo r Router Mode Enabling Router Confi guration Modes Matrix NSA Series Configu ration Guide 2-1 45 Router Configuration Mode Set IP protocol parameters. T ype router and the pr otocol name (and, for OSPF , the instance ID ) from Global or Interface Configuration mode.
Preparing the Device for Router Mode Enabling Router Configu ration Modes 2-146 Matrix NSA Series Configuration Guide Server Load Balancing (SLB) Real Server Configuration Mode Configure an LSNA T real server . Ty p e real and the real server IP addr ess from SLB Server Farm Configuration Mode.
Matrix NSA Series Configurati on Guide 3-1 3 Configuring Discovery Protocols This chapter describes how to config ure the discovery protocols supported by the firmware using CLI commands. 3.1 OVERVIEW Currently , three discovery protcols are supported: • The Enterasys Discovery (CDP), described in Section 3.
Discovery Protocols Command Set Displaying Neighbors 3-2 Matrix NSA Series Configuration Guide 3.2.1.1 show neighbors Use this command to display Network Neigh bor Discovery information from all supported discovery protcols.
Discovery Protocols Command Set Displaying Neighbors Matrix NSA Series Configuration Guide 3-3 Matrix(rw)-> show neighbors Port Device ID Port ID Type Network Address --------------------------------- -------------------------------------------- ge.
Discovery Protocols Command Set Enterasys Discove ry Protocol 3-4 Matrix NSA Series Configuration Guide 3.2.2 Enterasys Discovery Pro tocol Purpose T o enable and configure the En terasys Discovery Protocol (CDP), used to disc ov er network topology .
Discovery Protocols Command Set Enterasys Discovery Protocol Matrix NSA Series Configuration Guide 3-5 3.2.2.1 show cd p Use this command to display the st atus of the CDP discovery protocol and message interval on one or more ports.
Discovery Protocols Command Set Enterasys Discove ry Protocol 3-6 Matrix NSA Series Configuration Guide Ta b l e 3 - 1 provides an explanation of the command output. T abl e 3- 1 s ho w cdp Output Details Output What It Displays... CDP Global Status Whether CDP is globall y auto-enabled, enabled or disabl ed.
Discovery Protocols Command Set Enterasys Discovery Protocol Matrix NSA Series Configuration Guide 3-7 3.2.2.2 set cdp st ate Use this command to enable or dis able the CDP discovery protocol on on e or more ports.
Discovery Protocols Command Set Enterasys Discove ry Protocol 3-8 Matrix NSA Series Configuration Guide 3.2.2.3 set cdp auth Use this command to set a global CDP authentica tion code.
Discovery Protocols Command Set Enterasys Discovery Protocol Matrix NSA Series Configuration Guide 3-9 3.2.2.4 set cdp interval Use this command to set the message interval frequency (in seconds) of the C DP discovery protocol. set cdp interval fr equency Synt ax Description Command Default s None.
Discovery Protocols Command Set Enterasys Discove ry Protocol 3-10 Matrix NSA Series Configuration Gui de 3.2.2.5 set cd p hold-time Use this command to set the hold time value fo r CDP discovery protocol configuration messages. set cdp hold-time hold-time Synt ax Description Command Default s None.
Discovery Protocols Command Set Enterasys Discovery Protocol Matrix NSA Series Configuration Guide 3-1 1 3.2.2.6 clear cd p Use this command to reset CDP discove ry protocol settings to defaults.
Discovery Protocols Command Set Cisco Discovery Protocol 3-12 Matrix NSA Series Configuration Gui de 3.2.3 Cisco Discovery Protocol Purpose T o enable and configure the Cisco Discovery Protocol, used to discover network topology .
Discovery Protocols Command Set Cisco Discovery Protocol Matrix NSA Series Configuration Guide 3-13 3.2.3.1 show ciscodp Use this command to display glo bal Cisco Discovery Pro t oc ol information . show ciscodp Synt ax Description None. Command Default s None.
Discovery Protocols Command Set Cisco Discovery Protocol 3-14 Matrix NSA Series Configuration Gui de Holdtime (TTL) Number of seconds ne ighboring devices will hold PDU transmissions from the sending device. Default value of 180 can be changed with the s et ciscodp holdtime command as described in Section 3.
Discovery Protocols Command Set Cisco Discovery Protocol Matrix NSA Series Configuration Guide 3-15 3.2.3.2 show ciscodp port info Use this command to display summ ary information about the Cisco Discovery Protocol on on e or more ports.
Discovery Protocols Command Set Cisco Discovery Protocol 3-16 Matrix NSA Series Configuration Gui de T able 3-3 show port ciscod p info Output Det ails Output What It Displays... Port Po rt designati on. State W hether CiscoDP is enabled or disabled on this port.
Discovery Protocols Command Set Cisco Discovery Protocol Matrix NSA Series Configuration Guide 3-17 3.2.3.3 set ciscodp st atus Use this command to enable or dis able Cisco Discovery Protocol globally on the device. set ciscodp status { auto | enable | disable } Synt ax Description Command Default s None.
Discovery Protocols Command Set Cisco Discovery Protocol 3-18 Matrix NSA Series Configuration Gui de 3.2.3.4 set ciscodp timer Use this command to set the number of seconds between Cisco Discovery Protocol PDU transmissions. set ciscodp timer time Synt ax Description Command Default s None.
Discovery Protocols Command Set Cisco Discovery Protocol Matrix NSA Series Configuration Guide 3-19 3.2.3.5 set ciscodp hold time Use this command to set the time to live (TTL) for Cis co Dis covery Protocol PDUs. This is the amount of time (in seconds) neig hboring devices will hold PDU transmissions from the sending device.
Discovery Protocols Command Set Cisco Discovery Protocol 3-20 Matrix NSA Series Configuration Gui de 3.2.3.6 set ciscodp port Use this command to set the st atus, voice VLAN, extended trus t mode, and CoS priority for untrusted traffic for the Cisco Discove ry Protocol on on e or more ports.
Discovery Protocols Command Set Cisco Discovery Protocol Matrix NSA Series Configuration Guide 3-21 Synt ax Description Command Default s None. Command T ype Switch command.
Discovery Protocols Command Set Cisco Discovery Protocol 3-22 Matrix NSA Series Configuration Gui de Examples This example shows how to set th e Cisco DP port voice VLAN ID to 3 on port fe.1.6 and enable the port operational state: This example shows how to set th e Cisco DP extended trust mode to unt rusted on port fe.
Discovery Protocols Command Set Cisco Discovery Protocol Matrix NSA Series Configuration Guide 3-23 3.2.3.7 clear ciscod p Use this command to clear the Cisco Discov ery Protocol back to the default values.
Discovery Protocols Command Set Cisco Discovery Protocol 3-24 Matrix NSA Series Configuration Gui de This example shows how to clear the Ci sco DP port status on port fe.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-25 3.2.4 Link Layer Discover y Protocol and LLDP-MED The IEEE 802.1AB standard, common ly referred to as the Link Layer Discovery Protocol (LLDP), is described in “IEEE 802.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-26 Matrix NSA Series Configuration Gui de The standard specifies that certai n TL Vs are mand atory in transmitted LLDPDUs, while others are optional. Y ou can co nfigure on a port-specific basis which optional LLDP and LLDP-MED TL Vs should be sent in LLDPDUs.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-27 • show lldp port local-info ( Section 3.2.4.6 ) • show lldp port remote-info ( Section 3.2.4.7 ) • show lldp port network-po licy ( Section 3.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-28 Matrix NSA Series Configuration Gui de 3.2.4.1 show lldp Use this command to display LLDP configuration information. show lldp Synt ax Description None. Command Default s None.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-29 3.2.4.2 show lld p port status Use this command to display the LLDP status of one or more ports. The command lists the ports that are enabled to send and receive LLDPPDUs .
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-30 Matrix NSA Series Configuration Gui de 3.2.4.3 show lld p port trap Use this command to display the ports that are en ab.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-31 3.2.4.4 show lld p port tx-tlv Use this command to display info rmation about whi ch optional TL Vs have been configured to be transmitted on ports.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-32 Matrix NSA Series Configuration Gui de 3.2.4.5 show lld p port location-info Use this command to display conf igured location information for one or more ports. Ports are configured with a lo cation value using the set lldp port location-info command.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-33 3.2.4.6 show lld p port local-info Use this command to display the lo cal system information stored for one or more ports.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-34 Matrix NSA Series Configuration Gui de Ta b l e 3 - 4 describes the information displayed by the show lldp port local-info command.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-35 Chassis ID Mandatory basic LLDP TL V that identifies the chassis transmitting the LLDPDU. V alue is MAC address of chassis. Sys Name Optional basic LLDP TL V .
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-36 Matrix NSA Series Configuration Gui de Network Policy (app/tag/vlanId/cos/dscp) L LDP-MED Extensio ns Network Poli cy T L V .
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-37 PoE Power Limit (mW) LLDP-MED Extensio ns Extended Powe r via MDI TL V .
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-38 Matrix NSA Series Configuration Gui de 3.2.4.7 show lld p port remote-info Use this command to display the remote system information stored for a remote device co nnected to a local port.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-39 Note that the information fields displayed by the show lldp port remote-info command will vary , depending on the ty pe of remote device that is connected to the port.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-40 Matrix NSA Series Configuration Gui de 3.2.4.8 show lld p port network-policy Use this command to display LLDP port network policy configuratio n info rmation. Network policy information is configured using the set lldp port network-po licy command.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-41 Command T ype Switch command. Command Mode Read-Only . Example This example shows how to display all LLD P network policy information for ge.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-42 Matrix NSA Series Configuration Gui de 3.2.4.9 set lldp tx-interval Use this command to set the time, in seconds , between successive LLDP frame transmissions initiated by changes in the LLDP local system information.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-43 3.2.4.10 set lld p hold-multiplier Use this command to set the time-to-live valu e used in LLDP frames sent by this device.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-44 Matrix NSA Series Configuration Gui de 3.2.4.1 1 set lldp trap-interval Use this command to set the mini mum interval between LLDP notific ations sent by this device. LLDP notifications are sent when a remo te system change has been detected.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-45 3.2.4.12 set lld p med -fast -repeat Network connectivity devices tran smit only LLDP TL Vs in LLDPDUs until they detect that an LLDP-MED endpoint device has connected to a port.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-46 Matrix NSA Series Configuration Gui de 3.2.4.13 set lldp port st atus Use this command to enable or disable transmitting and processing received LLDPDUs on a port or range of ports.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-47 3.2.4.14 set lld p port trap Use this command to enable or disable sending LLDP notifications (traps) when a remote system change is detected.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-48 Matrix NSA Series Configuration Gui de 3.2.4.15 set lld p port med-trap Use this command to enable or disable sending an.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-49 3.2.4.16 set lld p port location-info Use this command to configure LLDP-MED location information on a port or range of ports.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-50 Matrix NSA Series Configuration Gui de 3.2.4.17 set lldp port tx-tlv Use this command to select the optional LLDP and LLDP-MED TL Vs to be transmitted in LLDPDUs by the specified port or ports.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-51 mac-phy MAC-PHY Configuration/St atus IEEE 802.3 Extensions TL V . V alue sent includes the operational MAU type, duplex, and speed of the port.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-52 Matrix NSA Series Configuration Gui de Command Default s None. Command T ype Switch command.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-53 3.2.4.18 set lld p port network-policy Use this command to configure network policy for a set of applicatio ns on a port or range of ports.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-54 Matrix NSA Series Configuration Gui de Command Default s None. Command T ype Switch command.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-55 Example This example configures the voice ap plication TL V on port fe.2.1 an d then configures the port to send the Network Policy TL V .
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-56 Matrix NSA Series Configuration Gui de 3.2.4.19 clear lldp Use this command to return LLDP parameters to their default values. clear lldp { all | tx-interval | hold-multipler | trap-interval | med-fas t-repeat } Synt ax Description Command Default s None.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-57 3.2.4.20 clear lld p port st atus Use this command to return the port status to the default value of both (both transmitting and processing received LLDPDUs are enabled).
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-58 Matrix NSA Series Configuration Gui de 3.2.4.21 clear lldp port trap Use this command to return th e port LLDP t rap setting to the default value of disabl ed. clear lldp port trap port-string Synt ax Description Command Default s None.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-59 3.2.4.22 clear lld p port med-trap Use this command to return the port LLDP-MED trap setting to the default value of disabled. clear lldp port med-trap port-string Synt ax Description Command Default s None.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-60 Matrix NSA Series Configuration Gui de 3.2.4.23 clear lldp port location-info Use this command to return th e port ECS ELIN location settin g to the default value of null.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-61 3.2.4.24 clear lld p port network-policy Use this command to return networ k policy for a set o f applications on a port or range of ports to default values.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-62 Matrix NSA Series Configuration Gui de Command Default s At least one application (or all ) and one policy parameter must be specified. Command T ype Switch command. Command Mode Read-W rite.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED Matrix NSA Series Configuration Guide 3-63 3.2.4.25 clear lld p port tx-tlv Use this command to clear the optional LLDP and LLDP-MED TL Vs to be transmitted in LLDPDUs by the specified po rt or po rts to the default value of disabled.
Discovery Protocols Command Set Link Layer Discovery Protocol and LLDP-MED 3-64 Matrix NSA Series Configuration Gui de Command Default s None. Command T ype Switch command.
Matrix NSA Series Configurati on Guide 4-1 4 Port Configuration This chapter describes the Port Configuratio n set of commands and how to use them. 4.1 PORT CONFIGURATION SUMMARY Console Port(s) Each .
Port Configuration Summary Port S tring Syntax Used in the CLI 4-2 Matrix NSA Series Configuration Guide 4.1.1 Port String Synt ax Used in the CLI Commands requiring a port-string parameter use the following syntax to designate port type, slot location, and po rt number: port type.
Port Configuration Summary Port S tring Syntax Used in the CLI Matrix NSA Series Configuration Guide 4-3 This example shows the port-string syntax for specifying the 1-Gigabit Ethernet port 14 in port group 3.
Process Overview: Port Configuration Port S tring Syntax Used in the CLI 4-4 Matrix NSA Series Configuration Guide 4.2 PROCESS OVERVIEW: PORT CONFIGURATION Use the following steps as a guide to conf iguringconsole and switch ports on the device: 6. Reviewing and setting console port properties ( Section 4.
Port Configuration Command Set Setting Console Port Properties Matrix NSA Series Configuration Guide 4-5 4.3 PORT CONFIGURATION COMMAND SET 4.3.1 Setting Console Port Properties Purpose T o review and set parameters for on e or more of the device’ s console ports, including baud rate, auto baud detection, stopbits an d parity .
Port Configuration Command Set Setting Console Port Properties 4-6 Matrix NSA Series Configuration Guide 4.3.1.1 show con sole Use this command to display propertie s set for one or more console p orts.
Port Configuration Command Set Setting Console Port Properties Matrix NSA Series Configuration Guide 4-7 4.3.1.2 clear console Use this command to clear the properti es set for one or more console ports.
Port Configuration Command Set Setting Console Port Properties 4-8 Matrix NSA Series Configuration Guide 4.3.1.3 show console baud Use this command to d isplay the baud rate for one or more console ports.
Port Configuration Command Set Setting Console Port Properties Matrix NSA Series Configuration Guide 4-9 4.3.1.4 set console baud Use this command to set the baud ra te for one or more console ports.
Port Configuration Command Set Setting Console Port Properties 4-10 Matrix NSA Series Configuration Gui de 4.3.1.5 clear console baud Use this command to clear the baud rate for one or more console ports.
Port Configuration Command Set Setting Console Port Properties Matrix NSA Series Configuration Guide 4-1 1 4.3.1.6 show console flowcontrol Use this command to display the type of flow control setting for one or more console ports.
Port Configuration Command Set Setting Console Port Properties 4-12 Matrix NSA Series Configuration Gui de 4.3.1.7 set console flowcontrol Use this command to set th e type of flow control for one or more console p o rts.
Port Configuration Command Set Setting Console Port Properties Matrix NSA Series Configuration Guide 4-13 4.3.1.8 clear console flowcontrol Use this command to clear the type of fl ow control for one or more console ports.
Port Configuration Command Set Setting Console Port Properties 4-14 Matrix NSA Series Configuration Gui de 4.3.1.9 show console bits Use this command to display the number of bits per character set for one or more console ports.
Port Configuration Command Set Setting Console Port Properties Matrix NSA Series Configuration Guide 4-15 4.3.1.10 set console bit s Use this command to set the number of bits per character for one or more console ports.
Port Configuration Command Set Setting Console Port Properties 4-16 Matrix NSA Series Configuration Gui de 4.3.1.1 1 clear console bi t s Use this command to clear the number of bits per character for one or more console ports.
Port Configuration Command Set Setting Console Port Properties Matrix NSA Series Configuration Guide 4-17 4.3.1.12 show console stopbit s Use this command to display the co nso le port stop bits per character .
Port Configuration Command Set Setting Console Port Properties 4-18 Matrix NSA Series Configuration Gui de 4.3.1.13 set console stopbit s Use this command to set the stop bits pe r character for one or more console ports.
Port Configuration Command Set Setting Console Port Properties Matrix NSA Series Configuration Guide 4-19 4.3.1.14 clear console stopbit s Use this command to clear the stop bits per character for one or more console ports.
Port Configuration Command Set Setting Console Port Properties 4-20 Matrix NSA Series Configuration Gui de 4.3.1.15 show console parity Use this command to display the type of parity checking set for one or more c on sole ports.
Port Configuration Command Set Setting Console Port Properties Matrix NSA Series Configuration Guide 4-21 4.3.1.16 set console p ari ty Use this command to set the parity ty pe for one or more console ports.
Port Configuration Command Set Setting Console Port Properties 4-22 Matrix NSA Series Configuration Gui de 4.3.1.17 clear consol e p arity Use this command to clear the parity type for one or more con sole ports.
Port Configuration Command Set Reviewing Port S tatus Matrix NSA Series Configuration Guide 4-23 4.3.2 Reviewing Port St atus Purpose T o display operating status, dupl ex mode, sp eed, po rt type, and statistical information about traf fic received and transmitted through one or all switch ports on the device.
Port Configuration Command Set Reviewing Po rt S tat us 4-24 Matrix NSA Series Configuration Gui de 4.3.2.1 show port Use this command to display whether or not one or more ports are enabled for switching.
Port Configuration Command Set Reviewing Port S tatus Matrix NSA Series Configuration Guide 4-25 4.3.2.2 show port st atus Use this command to display oper ating and admin status, speed, du plex mode and port type fo r one or more ports on the de vice.
Port Configuration Command Set Reviewing Po rt S tat us 4-26 Matrix NSA Series Configuration Gui de T abl e 4-1 show port s tatus Output Details Output What It Displays... Port Port designation. For a detailed description of possible port-string values, refer to Section 4.
Port Configuration Command Set Reviewing Port S tatus Matrix NSA Series Configuration Guide 4-27 4.3.2.3 show port counters Use this command to display port counter statistic s detailing traffic throug h the device and throug h all MIB2 network device s.
Port Configuration Command Set Reviewing Po rt S tat us 4-28 Matrix NSA Series Configuration Gui de Examples This example shows how to display all counter stat istics, including MIB2 network traffic and traf fic through the device for fe.3.1: This example shows how to display all fe.
Port Configuration Command Set Reviewing Port S tatus Matrix NSA Series Configuration Guide 4-29 Ta b l e 4 - 2 provides an explanation of the co mma nd output. T able 4-2 show port counters Out put Details Output What It Displays... Port Port designation.
Port Configuration Command Set Reviewing Po rt S tat us 4-30 Matrix NSA Series Configuration Gui de 4.3.2.4 show port operst atuscause Use this command to display the causes configured to place operating status to a down or dormant state for one or more ports.
Port Configuration Command Set Reviewing Port S tatus Matrix NSA Series Configuration Guide 4-31 Command Default s If no options are specified, causes for all ports w ill be displayed. Command T ype Switch command. Command Mode Read-Only . Example This example shows how to display operation status causes for ports ge.
Port Configuration Command Set Reviewing Po rt S tat us 4-32 Matrix NSA Series Configuration Gui de 4.3.2.5 clear port operst atuscause Use this command to override the causes configured to place operating status to a down or dormant state for one or more ports.
Port Configuration Command Set Disabling / Enabling and Namin g Po rts Matrix NSA Series Configuration Guide 4-33 4.3.3 Disabling / Enabling and Naming Port s Purpose T o disable and re-enable one or more ports, and to as sign an alias to a port. By default, all ports are enabled at device startup.
Port Configuration Command Set Disabling / Enabling and Naming Po rts 4-34 Matrix NSA Series Configuration Gui de 4.3.3.1 set port d isable Use this command to administratively disable one or more ports. set port disable port-string Synt ax Description Command Default s None.
Port Configuration Command Set Disabling / Enabling and Namin g Po rts Matrix NSA Series Configuration Guide 4-35 4.3.3.2 set port enable Use this command to administrativ ely enable one or more ports. set port enable port-string Synt ax Description Command Default s None.
Port Configuration Command Set Disabling / Enabling and Naming Po rts 4-36 Matrix NSA Series Configuration Gui de 4.3.3.3 show port alias Use this command to display alias name(s assigned to one or more ports.
Port Configuration Command Set Disabling / Enabling and Namin g Po rts Matrix NSA Series Configuration Guide 4-37 4.3.3.4 set port alias Use this command to assign an alias name to a port. set port alias port-string [ string ] Synt ax Description Command Default s If string is not specified, the alias assign ed to the port will be cleared.
Port Configuration Command Set Disabling / Enabling and Naming Po rts 4-38 Matrix NSA Series Configuration Gui de 4.3.3.5 show forcelinkdown Use this command to display the stat us of the force link do wn function. show forcelinkdown Synt ax Description None.
Port Configuration Command Set Disabling / Enabling and Namin g Po rts Matrix NSA Series Configuration Guide 4-39 4.3.3.6 set forcelinkdown Use this command to enable or di sable th e force link down function. When e nabled, this forces ports in the “operstatus down” state to become disabled.
Port Configuration Command Set Disabling / Enabling and Naming Po rts 4-40 Matrix NSA Series Configuration Gui de 4.3.3.7 clear forcelinkdown Use this command to resets the force link down function to the default state of disabled. clear forcelinkdown Synt ax Description None.
Port Configuration Command Set Setting Speed and Duplex Mode Matrix NSA Series Configuration Guide 4-41 4.3.4 Setting Speed and Duplex Mode Purpose T o review and set the operational speed in Mbps and the default duplex mode: Half , for half duplex, or Full , for full duplex for one or more ports.
Port Configuration Command Set Setting Speed and Duplex Mode 4-42 Matrix NSA Series Configuration Gui de 4.3.4.1 show port speed Use this command to display the defaul t speed setting on one or more ports.
Port Configuration Command Set Setting Speed and Duplex Mode Matrix NSA Series Configuration Guide 4-43 4.3.4.2 set port speed Use this command to set the defau lt speed of one or more ports. Th is setting only takes effect on ports that have auto-negotiation disabled.
Port Configuration Command Set Setting Speed and Duplex Mode 4-44 Matrix NSA Series Configuration Gui de 4.3.4.3 show port duplex Use this command to display th e default duplex setting (half or full) for one or more ports.
Port Configuration Command Set Setting Speed and Duplex Mode Matrix NSA Series Configuration Guide 4-45 4.3.4.4 set port duplex Use this command to set the default d uplex type for one or more ports. set port duplex port-string { full | half } Synt ax Description Command Default s None.
Port Configuration Command Set Enabling / Disabling Jumbo Frame Support 4-46 Matrix NSA Series Configuration Gui de 4.3.5 Enabling / Disabli ng Jumbo Frame Support Purpose T o review , enable, and disable jumbo frame suppo rt on one or more ports. This allows Gigabit Ethernet ports to transmit frames up to 10 KB in size.
Port Configuration Command Set Enabling / Disabling Jumbo Fram e Support Matrix NSA Series Configuration Guide 4-47 4.3.5.1 show port jumbo Use this command to display the status of jumb o frame suppor t and maximum transmission units (MTU) on one or more ports.
Port Configuration Command Set Enabling / Disabling Jumbo Frame Support 4-48 Matrix NSA Series Configuration Gui de 4.3.5.2 set port j umbo Use this command to enable or disa ble ju mbo frame support on on e or more ports.
Port Configuration Command Set Enabling / Disabling Jumbo Fram e Support Matrix NSA Series Configuration Guide 4-49 4.3.5.3 clear port jumbo Use this command to reset jumb o frame support status to enabled on one or more ports.
Port Configuration Command Set Setting Auto-Negotiation and Ad vertised Ability 4-50 Matrix NSA Series Configuration Gui de 4.3.6 Setting Auto-Negotiati on and Advertised Ability Purpose T o review , disable or enable auto-neg otiation, and to review or set a port’ s advertised mode of operation.
Port Configuration Command Set Setting Auto-N egotiation and Advertised Abili ty Matrix NSA Series Configuration Guide 4-51 4.3.6.1 show port negotiation Use this command to display the status of auto-negotiation for one or more ports.
Port Configuration Command Set Setting Auto-Negotiation and Ad vertised Ability 4-52 Matrix NSA Series Configuration Gui de 4.3.6.2 set port negotiation Use this command to enable or disable auto-negotiation on one or more ports. set port negotiation port-string { enable | disable } Synt ax Description Command Default s None.
Port Configuration Command Set Setting Auto-N egotiation and Advertised Abili ty Matrix NSA Series Configuration Guide 4-53 4.3.6.3 show port mdix Use this command to display the MDI/MDIX mode on one or more ports. This function detects and adapts to straight through (MDI) or cross - over (MDIX) Ethernet cabling o n switch ports.
Port Configuration Command Set Setting Auto-Negotiation and Ad vertised Ability 4-54 Matrix NSA Series Configuration Gui de 4.3.6.4 set port mdix Use this command to set MDI/M D IX mode on one or more ports.
Port Configuration Command Set Setting Auto-N egotiation and Advertised Abili ty Matrix NSA Series Configuration Guide 4-55 4.3.6.5 clear port mdix Use this command to reset MDIX mode to the default sett ing of auto on on e or more ports.
Port Configuration Command Set Setting Auto-Negotiation and Ad vertised Ability 4-56 Matrix NSA Series Configuration Gui de 4.3.6.6 show port advertise Use this command to display the adve rtised ability on one or more ports.
Port Configuration Command Set Setting Auto-N egotiation and Advertised Abili ty Matrix NSA Series Configuration Guide 4-57 T able 4-3 show port advertise Out put Details Output What It Displays.
Port Configuration Command Set Setting Auto-Negotiation and Ad vertised Ability 4-58 Matrix NSA Series Configuration Gui de 4.3.6.7 set port advertise Use this command to enable or di sable and to configure the adverti sed ability on one or more ports.
Port Configuration Command Set Setting Auto-N egotiation and Advertised Abili ty Matrix NSA Series Configuration Guide 4-59 Command Mode Read-W rite. Example This example shows how to set fe.3.4 to advertise 100BASE-TX full dupl ex operation: Matrix(rw)-> set port advertise fe .
Port Configuration Command Set Setting Auto-Negotiation and Ad vertised Ability 4-60 Matrix NSA Series Configuration Gui de 4.3.6.8 clear port ad vertise Use this command to reset advertised ability to the default setting on one or more ports.
Port Configuration Command Set Setting Auto-N egotiation and Advertised Abili ty Matrix NSA Series Configuration Guide 4-61 Command Default s If not specified, all modes of ad vertised ability will be cleared. Command T ype Switch command. Command Mode Read-W rite.
Port Configuration Command Set Setting Flow Control 4-62 Matrix NSA Series Configuration Gui de 4.3.7 Setting Flow Control Purpose T o review , enable or dis able port flow control. Flow control is used to manage the transmission between two devices as specifie d by IEEE 802.
Port Configuration Command Set Setting Flow Control Matrix NSA Series Configuration Guide 4-63 4.3.7.1 show port flowcontrol Use this command to display the flow control state for one or more ports.
Port Configuration Command Set Setting Flow Control 4-64 Matrix NSA Series Configuration Gui de TX Oper Whether or not the port is operationally enabled or disabled for sending flow control frames. RX Admin Whether or not the port is administratively enabled or disabled for acknowledging recei ved flow control frames.
Port Configuration Command Set Setting Flow Control Matrix NSA Series Configuration Guide 4-65 4.3.7.2 set port flowcontrol Use this command to enable or disable fl ow control settings for one or more ports. set port flowcontrol po rt-string { receive | send | both }{ enable | disable } Synt ax Description Command Default s None.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection 4-66 Matrix NSA Series Configuration Gui de 4.3.8 Configuring Link T raps and Link Flap Detection Purpose T o disable or re-enable link traps and to configure the link flapping detection function.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection Matrix NSA Series Configuration Guide 4-67 4.3.8.1 show port trap Use this command to display whether the port is e na bled for gene rating an SNMP trap message if its link state changes.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection 4-68 Matrix NSA Series Configuration Gui de 4.3.8.2 set port trap Use this command to enable or disable ports for sending SNMP tr ap messages when their link status changes.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection Matrix NSA Series Configuration Guide 4-69 4.3.8.3 show linkflap Use this command to display link flap det ection state and config uration information.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection 4-70 Matrix NSA Series Configuration Gui de Command Default s • If not specified, information about all link flap detection settings will be displayed. • If port-string is not specified, information for all ports will be displayed.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection Matrix NSA Series Configuration Guide 4-71 Ta b l e 4 - 5 provides an explanation of the show linkflap parameters command output.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection 4-72 Matrix NSA Series Configuration Gui de T imeElapsed T ime (in seconds) since the last link down event. V iolations Number of link flap viola tions on listed po rts since sy s t em start.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection Matrix NSA Series Configuration Guide 4-73 4.3.8.4 set linkflap globalst ate Use this command to globally enable or disable the link flap detection fu nction. By default, the function is disable d globally and on a ll ports.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection 4-74 Matrix NSA Series Configuration Gui de 4.3.8.5 set linkfl ap Use this command to enable or disable lin k flap mo nitoring on one or more ports.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection Matrix NSA Series Configuration Guide 4-75 4.3.8.6 set linkflap interval Use this command to set the time interval (in seconds) for accumulatin g link down transitions. set linkflap interval port-string interval_value Synt ax Description Command Default s None.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection 4-76 Matrix NSA Series Configuration Gui de 4.3.8.7 set linkfl ap action Use this command to set reactions to a link flap violation. set linkflap action port-string { disableInterface | ge nsyslogentr y | gentrap | all } Synt ax Description Command Default s None.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection Matrix NSA Series Configuration Guide 4-77 4.3.8.8 clear linkflap action Use this command to clear reac tions to a link flap violation.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection 4-78 Matrix NSA Series Configuration Gui de 4.3.8.9 set linkfl ap threshold Use this command to set the link flap action trigger count. set linkflap threshold port-string thr eshold_value Synt ax Description Command Default s None.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection Matrix NSA Series Configuration Guide 4-79 4.3.8.10 set linkflap downtime Use this command to set the time interval (in seconds) one or mo re ports will be held down after a link flap violation.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection 4-80 Matrix NSA Series Configuration Gui de 4.3.8.1 1 clear linkflap down Use this command to toggle link fl ap disabled ports to operational.
Port Configuration Command Set Configuring Link T raps and Link Flap Detection Matrix NSA Series Configuration Guide 4-81 4.3.8.12 clear linkflap Use this command to clear all link flap options and / or statistics on one or more ports.
Port Configuration Command Set Configuring Broadcast Suppression 4-82 Matrix NSA Series Configuration Gui de 4.3.9 Configuring Broa dcast Suppression Purpose T o review , disable or set the broadcast thresholds on one or more ports.
Port Configuration Command Set Configuring Broadcast Suppression Matrix NSA Series Configuration Guide 4-83 4.3.9.1 show port broadcast Use this command to display p ort broadcast suppression information for one or more p orts.
Port Configuration Command Set Configuring Broadcast Suppression 4-84 Matrix NSA Series Configuration Gui de Peak Rate (pkts/s) Peak rate of broadcast transmission received on this port in packets per second. Peak Rate T ime (ddd:hh:mm:ss) T ime (in day , hours, minutes and seconds) the peak rate was reached on this port.
Port Configuration Command Set Configuring Broadcast Suppression Matrix NSA Series Configuration Guide 4-85 4.3.9.2 set port broadcast Use this command to set the broadcast suppression limit, in packets per second, on one or more ports. This sets a threshold on the broadcast traffic that is received and sw itched out to othe r ports.
Port Configuration Command Set Configuring Broadcast Suppression 4-86 Matrix NSA Series Configuration Gui de 4.3.9.3 clear port broadcast Use this command to reset the broadcast threshold an d/or clear the peak rate and peak time values on one or switch more ports.
Configuring Port Mirroring Supported Mirrors Matrix NSA Series Configuration Guide 4-87 4.4 CONFIGURING PORT MIRRORING The Matrix device allows you to mirror (or redirect) the traffic be ing switch ed on a po rt or VL AN for the purposes of network traffic analysis and connection assurance.
Configuring Port Mi rroring IDS Mirroring Considerations 4-88 Matrix NSA Series Configuration Gui de 4.4.2 IDS Mirro ring Consideration s An IDS mirror is a one-to-many port mirror that ha s be en designed for use with an Intrusion Detection System.
Configuring Port Mirroring Setting Port Mirroring Matrix NSA Series Configuration Guide 4-89 4.4.4 Setting Port Mirroring Purpose T o review and configure port mirror ing on the device. Commands The comma nds used to review and configure port mirroring are listed below and described in the associated section as shown.
Configuring Port Mi rroring Setting Port Mirroring 4-90 Matrix NSA Series Configuration Gui de 4.4.4.1 show port mirroring Use this command to display the source and tar g et ports for mirroring, and whether mirroring is currently enabled or disable d fo r those ports.
Configuring Port Mirroring Setting Port Mirroring Matrix NSA Series Configuration Guide 4-91 4.4.4.2 set port mirroring Use this command to create a ne w mirroring relatio nship or to enable or disable an existing mirroring relationshi p between two ports.
Configuring Port Mi rroring Setting Port Mirroring 4-92 Matrix NSA Series Configuration Gui de Example This example shows how to enable port mirroring of transmitted and received frames with fe.1.4 as the source port and fe.1.1 1 as the target port: Matrix(rw)-> set port mirroring enable f e.
Configuring Port Mirroring Setting Port Mirroring Matrix NSA Series Configuration Guide 4-93 4.4.4.3 clear port mirroring Use this command to clear a port mirroring relationship. clear port mirroring { igmp-mcast | source destination } Synt ax Description Command Default s None.
Configuring LACP LACP Operation 4-94 Matrix NSA Series Configuration Gui de 4.5 CONFIGURING LACP Using multiple links simultaneously to increase bandw idth is a desirable switch feature, which can be accomplished if both sides agree on a set of ports that are being used as a Link Aggregation Group (LAG).
Configuring LACP LACP T erminology Matrix NSA Series Configuration Guide 4-95 The operation of LACP invo lves the following activities: • Checking that candidate links can actua lly be a ggregated. • Controlling the addition of a link to a LAG , and the creation of the group if necessary .
Configuring LACP Matrix Series Usage Considerations 4-96 Matrix NSA Series Configuration Gui de 4.5.3 Matrix Series Usage Consideration s In normal usage (and typical impl ementations) there is no need to modify any of th e default LACP parameters on the Matrix Series device.
Configuring LACP Matrix Series Usage Considerations Matrix NSA Series Configuration Guide 4-97 LACP uses a system priority va lue to build a LAG ID, which de te rmines aggregation precedence. If there are two partner devices competing for th e same aggregator, LACP compares the LAG IDs for each grouping of ports.
Configuring LACP Configuring Link Aggregation 4-98 Matrix NSA Series Configuration Gui de 4.5.4 Configuring Link Aggregation Purpose T o disable and re-enable the Link Aggregation Control Protocol (LA.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configuration Guide 4-99 • clear lacp outportAlgorithm ( Section 4.5.4.20 ).
Configuring LACP Configuring Link Aggregation 4-100 Matrix NSA Series Configuration Guide 4.5.4.1 show lacp Use this command to disp lay the global LACP enable state, or to display informa tion abou t one or more aggregator ports. Each Matr ix Series module provides virtua l link aggregator ports, which are designated in the CLI as lag.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configu ration Guide 4-1 01 T able 4-9 show lacp Ou tput Detail s Output What It Displays... Aggregator LAG port designation. Each Matrix Series module provides 48 virtual link aggregat or ports, which are designated in the CLI as lag.
Configuring LACP Configuring Link Aggregation 4-102 Matrix NSA Series Configuration Guide 4.5.4.2 set lacp Use this command to disable or enable the Li nk Ag gregation Control Protocol (LACP) on the device. LACP is enabled by default. set lacp { disable | enable } Synt ax Description Command Default s None.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configu ration Guide 4-1 03 4.5.4.3 clear lacp state Use this command to reset LACP to the default state of enabled. clear lacp state Synt ax Description None. Command Default s None. Command T ype Switch command.
Configuring LACP Configuring Link Aggregation 4-104 Matrix NSA Series Configuration Guide 4.5.4.4 set lacp asyspri Use this command to set the LACP system priority . LACP uses this value to determine aggregation precedence. If there are two partner devices comp eting for the same aggreg a tor, LACP compares the LAG IDs for each grouping of ports.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configu ration Guide 4-1 05 4.5.4.5 set lacp aadminkey Use this command to set the administratively assign ed key for one or more aggregator po rts. LACP will use this value to form an oper key .
Configuring LACP Configuring Link Aggregation 4-106 Matrix NSA Series Configuration Guide 4.5.4.6 clear lacp Use this command to clear LACP syst em priority or admin key settings. clear lacp {[ asyspri] [ aadminkey port-string ]} Synt ax Description Command Default s None.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configu ration Guide 4-1 07 4.5.4.7 set lacp static Use this command to assign one o r more underlyi ng physical ports to a Link Aggregation Gro up (LAG).
Configuring LACP Configuring Link Aggregation 4-108 Matrix NSA Series Configuration Guide Example This example shows how to add port fe.1 .6 to the LAG of aggr egator port 48: Matrix(rw)-> set lacp static lag.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configu ration Guide 4-1 09 4.5.4.8 clear lacp static Use this command to remove specific ports from a Link Aggregation Group. clear lacp static lagportstring port-string Synt ax Description Command Default s None.
Configuring LACP Configuring Link Aggregation 4-1 10 Matrix NSA Series C onfiguration Guide 4.5.4.9 show lacp singleportlag Use this command to display the stat us of the single port LAG function. show lacp singleportlag Synt ax Description None. Command Default s None.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configuration Guide 4-1 1 1 4.5.4.10 set singleportlag Use this command to enable or disable the form ation of single port LAGs. When enabled, this maintains LAGs when only one port is rece iving protocol tran smissions from a partner .
Configuring LACP Configuring Link Aggregation 4-1 12 Matrix NSA Series C onfiguration Guide 4.5.4.1 1 clear singleportlag Use this command to reset the single port LAG function back to the default state of disabled. clear lacp singleportlag Synt ax Description None.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configuration Guide 4-1 13 4.5.4.12 show port lacp Use this command to display link aggregation information for one or more underlying physical ports.
Configuring LACP Configuring Link Aggregation 4-1 14 Matrix NSA Series C onfiguration Guide Examples This example shows how to display detailed LACP status information f or port fe.1.12: This example shows how to display summarized LACP status informa tion for port fe.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configuration Guide 4-1 15 This example shows how to display LACP counters for port fe.
Configuring LACP Configuring Link Aggregation 4-1 16 Matrix NSA Series C onfiguration Guide 4.5.4.13 set port l acp Use this command to set link aggr egation parameters for one or more ports. These settings will determine the specified underlying physical ports’ ability to join a LAG , and their administrative state once aggregated.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configuration Guide 4-1 17 asyspri asyspri Sets the port’ s actor system priority . The LACP implementation on the Matrix Series device uses this value to determine aggregation precedence when there are two devices competing for the same aggregator .
Configuring LACP Configuring Link Aggregation 4-1 18 Matrix NSA Series C onfiguration Guide Command Default s • At least one parameter must be entered per port-string. • If enable or disable are not specified, port(s) w ill be enabled with the LACP parameters entered.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configuration Guide 4-1 19 4.5.4.14 clear port lacp Use this command to clear link aggreg ation settings for one or more ports.
Configuring LACP Configuring Link Aggregation 4-120 Matrix NSA Series Configuration Guide Command Default s None. Command T ype Switch command. Command Mode Read-W rite. Example This example shows how to clear all link aggregation parameters for port ge.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configu ration Guide 4-1 21 4.5.4.15 show lacp flowRegeneration Use this command to display th e LACP flow regeneration state. show lacp flowRege neration Synt ax Description None. Command Default s None.
Configuring LACP Configuring Link Aggregation 4-122 Matrix NSA Series Configuration Guide 4.5.4.16 set lacp flowRegeneration Use this command to enab le or disable LACP flow regeneration. When enab led and a new port joins a link aggregation group (LAG), LACP will redistribute all existing flows over the LAG .
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configu ration Guide 4-1 23 4.5.4.17 clear lacp flowRegeneration Use this command to reset LACP flow rege neration to its def ault state (disabled). clear lacp flowRegeneration Synt ax Description None.
Configuring LACP Configuring Link Aggregation 4-124 Matrix NSA Series Configuration Guide 4.5.4.18 show lacp outportAlgorithm Use this command to display the current LACP outport algorithm. show lacp outportAlgorithm Synt ax Description None. Command Default s None.
Configuring LACP Configuring Link Aggregatio n Matrix NSA Series Configu ration Guide 4-1 25 4.5.4.19 set lacp outportAlgorithm Use this command to set the algorithm LACP will use for outport determination. set lacp outportAlgorithm {d ip-sip | da-sa | round-robin} Synt ax Description Command Default s None.
Configuring LACP Configuring Link Aggregation 4-126 Matrix NSA Series Configuration Guide 4.5.4.20 clear lacp outportAlgorithm Use this command to reset LACP to DI P-SIP , its default outport algorithm. clear lacp outportAlgorithm Synt ax Description None.
Matrix NSA Series Configurati on Guide 5-1 5 SNMP Configuration This chapter describes the Simple Network Manage ment Protocol (SNMP) se t of commands and how to use them. 5.1 SNMP CONFIGURATION SUMMARY SNMP is an application-layer protocol that f acilitates the exchange of management information between network devices.
SNMP Configuration Summa ry SNMPv3 5-2 Matrix NSA Series Configuration Guide Does not apply to MA TRIX E7. 5.1.2 SNMPv3 SNMPv3 is an interoperable stan dards-based protocol that provid es sec ure access to device s by authenticating and encrypting frames over the network.
SNMP Configuration Summary Using SNMP Contexts to Access Sp ecific MIBs or Routing Modules Matrix NSA Series Configuration Guide 5-3 5.1.4 Using SNMP Context s to Access Specific MIBs or Routing Modules By default, when operating from the switch CLI, Matrix Series devices allow access to all SNMP MIBs or contexts.
SNMP Configuration Summa ry Using SNMP Contexts to Access Specific MIBs or Routi ng Modules 5-4 Matrix NSA Series Configuration Guide All SNMP contexts known to the de vice ca n be displaye d using th e show snmp context command as described in Section 5.
Process Overview: SNMP Configura tion Reviewing SNMP St atistics Matrix NSA Series Configuration Guide 5-5 5.2 PROCESS OVERVIEW : SNMP CONFIGURATION Use the following steps as a guide to configuring SNMP on the device: 1. Reviewing SNMP statistics ( Section 5.
SNMP Configuration Command Set Reviewing SNMP St atistics 5-6 Matrix NSA Series Configuration Guide 5.3.1.1 show snmp engineid Use this command to display the SNMP local engine ID. This is the SNMP v3 engine’ s administratively unique identifier . show snmp engineid Synt ax Description None.
SNMP Configuration Command Set Reviewing SNMP St atistics Matrix NSA Series Configuration Guide 5-7 5.3.1.2 show snmp counters Use this command to display SNMP traf fic counter va lues . show snmp counters Synt ax Description None. Command Default s None.
SNMP Configuration Command Set Reviewing SNMP St atistics 5-8 Matrix NSA Series Configuration Guide Ta b l e 5 - 3 shows a detailed explanation of the command output.
SNMP Configuration Command Set Reviewing SNMP St atistics Matrix NSA Series Configuration Guide 5-9 snmpInASNParseErrs Number of ASN.1 (Abstract Syntax Notation) or BER (Basic Encoding Rule s) errors encountered by the SNMP entity when decoding received SNMP messages.
SNMP Configuration Command Set Reviewing SNMP St atistics 5-10 Matrix NSA Series Configuration Gui de snmpInGetResponses Number of SN MP Get-Response PDUs accepted and processed by the SNMP protocol entity . snmpInTraps Number of SNMP T rap PDUs accepted and processed by the SNMP protocol entity .
SNMP Configuration Command Set Reviewing SNMP St atistics Matrix NSA Series Configuration Guide 5-1 1 snmpProxyDrops Number of SNMP Get, Set, or Inform request error messages that were dropped because the reply was larger than the proxy tar get’ s maximum message size.
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities 5-12 Matrix NSA Series Configuration Gui de 5.3.2 Configuring SNMP Users, Group s and Communities Purpose T o review and configure SNMP users, groups an d v1 and v2 communities.
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities Matrix NSA Series Configuration Guide 5-13 5.3.2.1 show snmp user Use this command to display info rmation about SNMP users. These are people registered to access SNMP management .
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities 5-14 Matrix NSA Series Configuration Gui de Examples This example shows how to di splay an SNMP user list: This example shows how to display in formation for the SNMP “guest” user: Ta b l e 5 - 4 shows a detailed explanation of the command output.
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities Matrix NSA Series Configuration Guide 5-15 5.3.2.2 set snmp user Use this command to create a new SNMPv3 user .
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities 5-16 Matrix NSA Series Configuration Gui de Example This example shows how to create a new SNMP user named “netops ”. By default, this user will be registered on the local SNMP engine without authentication and encryption.
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities Matrix NSA Series Configuration Guide 5-17 5.3.2.3 clear snmp user Use this command to remove a user from the SNMPv3 security-model list.
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities 5-18 Matrix NSA Series Configuration Gui de 5.3.2.4 show snmp group Use this command to display an SNMP group conf ig uration. An SNMP group is a collection of SNMPv3 users who share the same access privileges .
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities Matrix NSA Series Configuration Guide 5-19 Example This example shows how to di splay SNMP group information: Ta b l e 5 - 5 shows a detailed explanatio n of the command output.
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities 5-20 Matrix NSA Series Configuration Gui de 5.3.2.5 set snmp gro up Use this command to create an SN MP group. This associates SNMPv3 users to a group that shares common access privileges.
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities Matrix NSA Series Configuration Guide 5-21 5.3.2.6 clear snmp group Use this command to clear SNMP group settings globally or fo r a specific SNMP group and user .
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities 5-22 Matrix NSA Series Configuration Gui de 5.3.2.7 show snmp community Use this command to display SNMP community names and status. In SNMPv1 and v2, community names act as passwords to remote managemen t .
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities Matrix NSA Series Configuration Guide 5-23 5.3.2.8 set snmp commu nity Use this command to configur e an SNMP community grou p.
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities 5-24 Matrix NSA Series Configuration Gui de Command Mode Read-W rite. Examples This example shows how to set an SNMP commu.
SNMP Configuration Command Set Configuring SNMP Users, Groups and Communities Matrix NSA Series Configuration Guide 5-25 5.3.2.9 clear snmp community Use this command to delete an SNMP community name. clear snmp community name Synt ax Description Command Default s None.
SNMP Configuration Command Set Configuring SNMP Access Ri ghts 5-26 Matrix NSA Series Configuration Gui de 5.3.3 Configuring SN MP Access Rights Purpose T o review and configure SNMP access rights, as si gning viewing privileges and security levels to SNMP user groups.
SNMP Configuration Command Set Configuring SNMP Access Rights Matrix NSA Series Configuration Guide 5-27 5.3.3.1 show snmp access Use this command to display access rights and secu rity levels configured for SNMP one or more groups.
SNMP Configuration Command Set Configuring SNMP Access Ri ghts 5-28 Matrix NSA Series Configuration Gui de Command Mode Read-Only . Example This example shows how to di splay SNMP access information: Ta b l e 5 - 6 shows a detailed explanation of the command output.
SNMP Configuration Command Set Configuring SNMP Access Rights Matrix NSA Series Configuration Guide 5-29 Security level Security level applie d to this group.
SNMP Configuration Command Set Configuring SNMP Access Ri ghts 5-30 Matrix NSA Series Configuration Gui de 5.3.3.2 set snmp access Use this command to set an SNMP access configuration.
SNMP Configuration Command Set Configuring SNMP Access Rights Matrix NSA Series Configuration Guide 5-31 Command Default s • If security level is not specified, no authentication will be applied. • If context is not specified, access will be enabled for the default context.
SNMP Configuration Command Set Configuring SNMP Access Ri ghts 5-32 Matrix NSA Series Configuration Gui de 5.3.3.3 clear snmp access Use this command to clear the SNMP access entr y of a specific group, including its set SNMP security-model, and level of security .
SNMP Configuration Command Set Configuring SNMP MIB Views Matrix NSA Series Configuration Guide 5-33 5.3.4 Configuring SNMP MIB Views Purpose T o review and configure SNMP MIB views.
SNMP Configuration Command Set Configuring SNMP MIB Views 5-34 Matrix NSA Series Configuration Gui de 5.3.4.1 show snmp view Use this command to display the MIB configuration for SNMPv3 view-based access (V ACM).
SNMP Configuration Command Set Configuring SNMP MIB Views Matrix NSA Series Configuration Guide 5-35 Example This example shows how to display SNMP MIB view configuration information: Ta b l e 5 - 7 provides an explanation of t he command output. For detai ls on using the set snmp view command to assign variables, refer to Section 5.
SNMP Configuration Command Set Configuring SNMP MIB Views 5-36 Matrix NSA Series Configuration Gui de 5.3.4.2 show snmp context Use this command to display the context list conf iguration for SNMP’ s view-based access control. An SNMP context is a collection of management information that can be accessed by an SNMP agent or entity .
SNMP Configuration Command Set Configuring SNMP MIB Views Matrix NSA Series Configuration Guide 5-37 5.3.4.3 set snmp view Use this command to set a MIB configur ation for SNMPv3 view-based access (V ACM).
SNMP Configuration Command Set Configuring SNMP MIB Views 5-38 Matrix NSA Series Configuration Gui de 5.3.4.4 clear snmp view Use this command to delete an SNMPv3 MIB view . clear snmp view viewname subtr ee Synt ax Description Command Default s None.
SNMP Configuration Command Set Configuring SNMP T arget Parameters Matrix NSA Series Configuration Guide 5-39 5.3.5 Configuring SNMP T arget Parameters Purpose T o review and configure SNMP tar get parame ters. This controls where and under what circumstances SNMP notifications will be sent.
SNMP Configuration Command Set Configuring SNMP T a rget Parameters 5-40 Matrix NSA Series Configuration Gui de 5.3.5.1 show snmp targetp arams Use this command to display SNMP parameters used to generate a message to a target.
SNMP Configuration Command Set Configuring SNMP T arget Parameters Matrix NSA Series Configuration Guide 5-41 Example This example shows how to display SN MP tar get parameters information: Ta b l e 5 - 8 shows a detailed explanatio n of the command output.
SNMP Configuration Command Set Configuring SNMP T a rget Parameters 5-42 Matrix NSA Series Configuration Gui de Storage type Whether entry is stored in volatile , nonvol atile or read-only memory . Row status Status of this entry: active , notInService, or notReady .
SNMP Configuration Command Set Configuring SNMP T arget Parameters Matrix NSA Series Configuration Guide 5-43 5.3.5.2 set snmp targetp a rams Use this command to set SNMP tar get parameters , a named set of security/authorization criteria used to generate a message to a target.
SNMP Configuration Command Set Configuring SNMP T a rget Parameters 5-44 Matrix NSA Series Configuration Gui de Example This example shows how to set SNMP target pa rameters named “v1ExampleParams.
SNMP Configuration Command Set Configuring SNMP T arget Parameters Matrix NSA Series Configuration Guide 5-45 5.3.5.3 clear snmp ta rg etp arams Use this command to clear the SNMP tar get paramete r configuratio n. clear snmp targetparams tar getParams Synt ax Description Command Default s None.
SNMP Configuration Command Set Configuring SNMP T arget Addresses 5-46 Matrix NSA Series Configuration Gui de 5.3.6 Configuring SNMP T arget Addresses Purpose T o review and configure SNMP target addresses which will receive SNMP notification messages.
SNMP Configuration Command Set Configuring SNMP T arget Addresses Matrix NSA Series Configuration Guide 5-47 5.3.6.1 show snmp t arget addr Use this command to display SN MP tar get address information.
SNMP Configuration Command Set Configuring SNMP T arget Addresses 5-48 Matrix NSA Series Configuration Gui de T able 5- 9 s ho w snm p targetaddr Output Details Output What It Displays... Target Address Name Unique identifie r in the snmpT argetAddressT able .
SNMP Configuration Command Set Configuring SNMP T arget Addresses Matrix NSA Series Configuration Guide 5-49 5.3.6.2 set snmp target addr Use this command to configure an SNMP tar get ad dress.
SNMP Configuration Command Set Configuring SNMP T arget Addresses 5-50 Matrix NSA Series Configuration Gui de Command Default s • If not specified, udppor t will be set to 162 . • If not specified, mask will be set to 255.255.255.255 • If not specified, timeout will be set to 1500 .
SNMP Configuration Command Set Configuring SNMP T arget Addresses Matrix NSA Series Configuration Guide 5-51 5.3.6.3 clear snmp target addr Use this command to delete an SNMP ta rget address entry . clear snmp targetaddr tar getAddr Synt ax Description Command Default s None.
SNMP Configuration Command Set Configuring SNMP Notification Parame ters 5-52 Matrix NSA Series Configuration Gui de 5.3.7 Configuring SNMP Notification Parameters Purpose T o configure SNMP notification parameters and optional filters.
SNMP Configuration Command Set Configuring SNMP Notifi cati on Parameters Matrix NSA Series Configuration Guide 5-53 5.3.7.1 show snmp notify Use this command to display the SNMP notif y configuration, which determines which management targets will recei ve SNMP notifications.
SNMP Configuration Command Set Configuring SNMP Notification Parame ters 5-54 Matrix NSA Series Configuration Gui de Ta b l e 5 - 1 0 shows a detailed explanation o f the command o utput. T able 5-10 show snmp noti fy Output Details Output What It Displays.
SNMP Configuration Command Set Configuring SNMP Notifi cati on Parameters Matrix NSA Series Configuration Guide 5-55 5.3.7.2 set snmp notify Use this command to set the SNMP notify configurat ion. This creates an entry in the SNMP notify table, which is used to select management targ ets who should receive notification messages.
SNMP Configuration Command Set Configuring SNMP Notification Parame ters 5-56 Matrix NSA Series Configuration Gui de 5.3.7.3 clear snmp n otify Use this command to clear an SNMP notify co nfiguration. clear snmp notify notify Synt ax Description Command Default s None.
SNMP Configuration Command Set Configuring SNMP Notifi cati on Parameters Matrix NSA Series Configuration Guide 5-57 About SNMP Notify Filters Profiles indicating which tar gets should not receive SNMP notification messages are kept in the NotifyFilter table.
SNMP Configuration Command Set Configuring SNMP Notification Parame ters 5-58 Matrix NSA Series Configuration Gui de 5.3.7.4 show snmp notifyfilter Use this command to display SNMP notify filter information, identifying which profiles will not receive SNMP notifications.
SNMP Configuration Command Set Configuring SNMP Notifi cati on Parameters Matrix NSA Series Configuration Guide 5-59 5.3.7.5 set snmp notifyfil ter Use this command to create an SNMP notify filter configuration.
SNMP Configuration Command Set Configuring SNMP Notification Parame ters 5-60 Matrix NSA Series Configuration Gui de 5.3.7.6 clear snmp notifyfilter Use this command to delete an SNMP notify filter configuration. clear snmp notifyfilter pr ofile subtree oid-or-mib object Synt ax Description Command Default s None.
SNMP Configuration Command Set Configuring SNMP Notifi cati on Parameters Matrix NSA Series Configuration Guide 5-61 5.3.7.7 show snmp notifyprofile Use this command to display SNMP notify profile information. Th is associates target parameters to an SNMP notify filter to determine who should not receive SNMP notifications.
SNMP Configuration Command Set Configuring SNMP Notification Parame ters 5-62 Matrix NSA Series Configuration Gui de 5.3.7.8 set snmp notifyprofile Use this command to create an SNMP notify f ilter profile configuration. This associates a notification filter, created with the set snmp notifyfilter command ( Section 5.
SNMP Configuration Command Set Configuring SNMP Notifi cati on Parameters Matrix NSA Series Configuration Guide 5-63 5.3.7.9 clear snmp notifyprofile Use this command to delete an SNMP no tify profile configuration. clear snmp notifyprofile pr ofile targetpar am targetparam Synt ax Description Command Default s None.
SNMP Configuration Command Set Creating a Basic SNMP T rap Configuration 5-64 Matrix NSA Series Configuration Gui de 5.3.8 Creating a Basic SN MP T r ap Configuration T raps are notification messages .
SNMP Configuration Command Set Creating a Basic SNMP T rap Co nfiguration Matrix NSA Series Configuration Guide 5-65 Example This example shows how to: • create an SNMP community called mgmt • configure a trap notification called TrapSink This trap notification will be sent with the community name mgmt to the workstation 192.
SNMP Configuration Command Set Creating a Basic SNMP T rap Configuration 5-66 Matrix NSA Series Configuration Gui de 4. Verifies that the v2ExampleParams description of how to step th rough the door is, in fact, there.
Matrix NSA Series Configurati on Guide 6-1 6 Spanning T ree Configuration This chapter describes the Spanning T ree Config uration set of commands and how to use them. 6.1 SP ANNING T REE CO NFIGURATION SUMMARY 6.1.1 Overview: Single, Rapid an d Multiple S panning T ree Protocols The IEEE 802.
Spanning T ree Configuration Summary Spanning T ree Features 6-2 Matrix NSA Series Configuration Guide only if the forwarding link goes do wn. MSTP assigns each VLAN present on the network to a partic.
Spanning T ree Configuration Summary Loop Protect Matrix NSA Series Configuration Guide 6-3 Both upstream and downstream facing ports are pr otected. When a root or alternate port loses its path to the root bridge due to a message age expi ration it takes on the role of designated port.
Spanning T ree Configuration Summary Process Overview: Spanning T ree Configuration 6-4 Matrix NSA Series Configuration Guide Message age expiration and the expiration of the Loop Protect timer are both Loop Protect events. A notice level syslog message is produced for each su ch event.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-5 6.2 SP ANNING T REE CONF IGURATION COMMAND SET 6.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-6 Matrix NSA Series Configuration Guide • set spantree mstcfgid ( Section 6.2.1.19 ) • clear spantree mstcfgid ( Section 6.2.1.20 ) • show spantree bridgeprioritymode ( Section 6.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-7 • set spantree tctrapsuppress ( Section 6.2.1.46 ) • clear spantree tctrapsuppress ( Section 6.2.1.47 ) • show spantree txholdcount ( Section 6.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-8 Matrix NSA Series Configuration Guide • clear spantree newroottrapenable ( Section 6.2.1.73 ) • clear spantree default ( Section 6.2.1.74 ) • show spantree debug ( Section 6.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-9 6.2.1.1 show sp antree stat s Use this command to display Spanning T ree information for one or more por ts.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-10 Matrix NSA Series Configuration Gui de Examples This example shows how to display the device’ s Spanning T ree configuration: Ta b l e 6 - 1 s hows a de tailed explanation of command output.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-1 1 Root Forward Delay Amount of time (in secon d s) the root device spends in listening or learning mode. Bridge ID MAC Address Unique bridge MAC address, recognized by all bridges in the network.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-12 Matrix NSA Series Configuration Gui de This example shows how to display port-specific Spanning T ree inform ation for port ge.1.1. Ta b l e 6 - 2 desc ribes the port-specific information displayed.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-13 Role The Spanning T ree role of the port.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-14 Matrix NSA Series Configuration Gui de 6.2.1.2 show spantree version Use this command to display the current version of the Spanning Tree proto col running on the device.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-15 6.2.1.3 set spantree version Use this command to set the version of the Span ning Tree protocol to MSTP (Multiple Spanning Tree Protocol), RSTP (Rapid Spanning Tree Protocol) or to STP 802.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-16 Matrix NSA Series Configuration Gui de 6.2.1.4 clear spantree version Use this command to reset the Span ning T ree version to MSTP mode. clear spantree version Synt ax Description None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-17 6.2.1.5 show sp antree stpmo de Use this command to display the Spanning T ree Protocol (STP) mode setting. show spantree stpmode Synt ax Description None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-18 Matrix NSA Series Configuration Gui de 6.2.1.6 set spantree stpmode Use this command to globally enable or disable the Spanning T ree Protocol (STP) mode. set spantree stpmode { none | ieee8021 } Synt ax Description Command Default s None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-19 6.2.1.7 clear sp antree stpmode Use this command to reset the Sp an ning T ree protocol mode to the default setting of IEEE802.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-20 Matrix NSA Series Configuration Gui de 6.2.1.8 show spantree maxconfigurablestp s Use this command to display the setting for the maximum number of user configurable Spanning T ree instances.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-21 6.2.1.9 set spantree maxconfigurablestp s Use this command to set the maximum number of user configurable Spanning T ree instances.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-22 Matrix NSA Series Configuration Gui de 6.2.1.10 clear spantree maxconfigurablestp s Use this command to clear the setting for the maximu m number of user configurable Spanning Tree instances.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-23 6.2.1.1 1 show sp antree mstilist Use this command to display a list of Multiple Sp anning T ree (MST) instan ces configured on the device.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-24 Matrix NSA Series Configuration Gui de 6.2.1.12 set spantree msti Use this command to create or delete a Multiple Spanning Tree instance. set spantree msti sid sid { create | delete } Synt ax Description Command Default s None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-25 6.2.1.13 clear sp antree msti Use this command to delete one or mo re Multiple Spanning Tree i nstances. clear spantree msti sid Synt ax Description Command Default s None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-26 Matrix NSA Series Configuration Gui de 6.2.1.14 show spantree mstmap Use this command to display the mapping of a f iltering database ID (FID) to a Spanning T rees.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-27 6.2.1.15 set sp antree mstmap Use this command to map one or more filteri ng da tabase IDs (FIDs) to a SID. Since VLANs are mapped to FIDs, this essentially maps one or more VLAN IDs to a Spanning T ree (SID).
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-28 Matrix NSA Series Configuration Gui de 6.2.1.16 clear spantree mstmap Use this command to map a FID back to SID 0. clear spantree mstmap fid Synt ax Description Command Default s None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-29 6.2.1.17 show sp antree vlanlist Use this command to display the VLAN ID(s ) assigned to one or more Spanning T rees.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-30 Matrix NSA Series Configuration Gui de 6.2.1.18 show spantree mstcfgid Use this command to display the MST configuration identifier elemen ts, including format selector , configuration name, revision level, and configuration digest.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-31 6.2.1.19 set sp antree mstcfgid Use this command to set the MST config urati on name and/or rev ision level. set spantree mstcfgid { cfgname name | rev level } Synt ax Description Command Default s None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-32 Matrix NSA Series Configuration Gui de 6.2.1.20 clear spantree mstcfgid Use this command to reset the MST revision level to a default value of 0, and the configuration name to a default string representing the bridge MAC address.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-33 6.2.1.21 show sp antree bridgeprioritymode Use this command to display the Spanning T ree bridge priority mode setting. show spantree bridgeprioritymode Synt ax Description None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-34 Matrix NSA Series Configuration Gui de 6.2.1.22 set spantree bridgeprioritymode Use this command to set the Spanning Tree bridge pr iority mode to 8 02.1D (legacy) or 802.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-35 6.2.1.23 clear sp antree bridgepri oritymode Use this command to reset the Span ning Tree bridge priority mode to the default setting of 802.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-36 Matrix NSA Series Configuration Gui de 6.2.1.24 show spantree priority Use this command to display the Spanning T ree bridge priority .
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-37 6.2.1.25 set sp antree priority Use this command to set the devi ce’ s Spanning Tree priority . The device with the highest priority (lowest numerical value) become s the Spanning T ree root device.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-38 Matrix NSA Series Configuration Gui de This example shows how to set the bridge priority to 15 on all SIDs w.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-39 6.2.1.26 clear sp antree priority Use this command to reset the Spanning T ree priority to the default value of 32768.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-40 Matrix NSA Series Configuration Gui de 6.2.1.27 show spantree bridgehellomode Use this command to display the status of bridge hello mode on the device. When enabled, a s ingle bridge administrative hello time is being used.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-41 6.2.1.28 set sp antree bridgeh ellomode Use this command to enable or disabl e brid ge hello mode on the device. set spantree bridgehellomode { enable | disable } Synt ax Description Command Default s None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-42 Matrix NSA Series Configuration Gui de 6.2.1.29 clear spantree bridgehellomode Use this command to reset the Spanning T ree administrative hello mode to enabled.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-43 6.2.1.30 show sp antree hello Use this command to display th e Spanning T ree hello time. show spantree hello Synt ax Description None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-44 Matrix NSA Series Configuration Gui de 6.2.1.31 set spantree hello Use this command to set the device’ s Spanning T ree hello time, This is the time interval (in seconds) the device will transmit BPDUs indicating it is active.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-45 6.2.1.32 clear sp antree hello Use this command to reset the Spanning T ree hello time to th e default va lue of 2 seconds .
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-46 Matrix NSA Series Configuration Gui de 6.2.1.33 show spantree maxage Use this command to display the Sp anning T ree maximum aging time. show spantree maxage Synt ax Description None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-47 6.2.1.34 set sp antree maxage Use this command to set the brid ge maximum aging time.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-48 Matrix NSA Series Configuration Gui de 6.2.1.35 clear spantree maxage Use this command to reset the ma ximum aging time for a Spanning T r ee to the default value of 20 seconds.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-49 6.2.1.36 show sp antree fwddelay Use this command to display the Spannin g Tree forward delay time. show spantree fwddelay Synt ax Description None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-50 Matrix NSA Series Configuration Gui de 6.2.1.37 set spantree fwddelay Use this command to set the Spanning T ree forwar d delay . This is the maximum time (in seconds) the root device will wait before changing states (i.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-51 6.2.1.38 clear sp antree fwddelay Use this command to reset the Span n ing T ree forward delay to the default se tting of 15 second s.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-52 Matrix NSA Series Configuration Gui de 6.2.1.39 show spantree autoedge Use this command to display the status of automatic edge port detection. show spantree autoedge Synt ax Description None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-53 6.2.1.40 set sp antree autoedg e Use this command to enable or disable the au tomatic edge port detection function. set spantree autoedge { disable | enable } Synt ax Description Command Default s None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-54 Matrix NSA Series Configuration Gui de 6.2.1.41 clear spantree autoedge Use this command to reset automatic edge port detection to the default state of enabled.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-55 6.2.1.42 show sp antree legacypathcost Use this command to display the defa ult Spanning T ree path cost setting. show spantree legacypathcost Synt ax Description None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-56 Matrix NSA Series Configuration Gui de 6.2.1.43 set spantree legacyp athcost Use this command to enable or disable legacy (802.1D) path cost values. set spantree legacypathcost { disable | enable } Synt ax Description Command Default s None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-57 6.2.1.44 clear sp antree legacypathcost Use this command to set the Spanning T ree defau lt value for legacy path cost to 802.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-58 Matrix NSA Series Configuration Gui de 6.2.1.45 show sp antree tctrapsuppress Use this command to display the status of topo logy change trap suppression on Rapid Spanning Tree edge ports.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-59 6.2.1.46 set sp antree tctrapsuppress Use this command to disable or enable topology change trap suppression on Rapid Spanning Tree edge ports.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-60 Matrix NSA Series Configuration Gui de 6.2.1.47 clear spantree tctrap suppress Use this command to clear topology change trap suppression settings. clear spantree tctrapsuppress Synt ax Description None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-61 6.2.1.48 show sp antree txholdcount Use this command to display the maximu m BPDU transmission rate. show spantree txholdcount Synt ax Description None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-62 Matrix NSA Series Configuration Gui de 6.2.1.49 set spantree txholdcount Use this command to set the maximum BPDU tran smission rate. This is the number of BPDUs which will be transmitted be fore transmissions are subject to a one-second timer .
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-63 6.2.1.50 clear sp antree txholdcou nt Use this command to reset the transmit hold count to the default value of 6. clear spantree txholdcount Synt ax Description None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-64 Matrix NSA Series Configuration Gui de 6.2.1.51 show spantree maxhop s Use this command to d isplay the Spanning T ree maximum hop count. show spantree maxhops Synt ax Description None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-65 6.2.1.52 set sp antree maxhops Use this command to set the Spanning T ree maximum hop count.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-66 Matrix NSA Series Configuration Gui de 6.2.1.53 clear spantree maxhop s Use this command to reset the maximum hop count to the default value of 20. clear spantree maxhops Synt ax Description None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-67 6.2.1.54 show sp antree spanguard Use this command to display the status of the Spanning Tree span guard function. show spantree s panguard Synt ax Description None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-68 Matrix NSA Series Configuration Gui de 6.2.1.55 set spantree sp anguard Use this command to enable or disable the Spanni ng Tree span guard functio n.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-69 6.2.1.56 clear sp antree spanguard Use this command to resets the status of the Spannin g Tree span guard function to disabled.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-70 Matrix NSA Series Configuration Gui de 6.2.1.57 show spantree sp anguard ti meout Use this command to display the Span ning Tree span guard timeout setting. show spantree spanguardtimeout Synt ax Description None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-71 6.2.1.58 set sp antree sp anguardtimeout Use this command to set the amount of time (in sec onds) an edge port will remain lock ed by the span guard function.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-72 Matrix NSA Series Configuration Gui de 6.2.1.59 clear spantree sp anguard timeout Use this command to reset the Spanning Tree span guard timeout to the default value of 300 seconds.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-73 6.2.1.60 show sp antree spanguardlock Use this command to display the span gu ard lock status of one or more ports. show spantree s panguardlock port-string Synt ax Description Command Default s None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-74 Matrix NSA Series Configuration Gui de 6.2.1.61 clear / set spantree sp anguardlock Use either of these commands to unlock one or more ports locked by the Spanning Tree span guard function.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-75 6.2.1.62 show sp antree spanguard trapenable Use this command to displays the state of the Spanning Tree span guard trap function.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-76 Matrix NSA Series Configuration Gui de 6.2.1.63 set spantree sp anguard trapenable Use this command to enable or disable the sending of an SNMP trap message when span guard detects that an unauthorized port has tried to join the Spanning Tree.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-77 6.2.1.64 clear sp antree spanguard trap enable Use this command to reset the Spanning Tree span guard trap functio n back to the default state of enabled.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-78 Matrix NSA Series Configuration Gui de 6.2.1.65 show spantree backuproot Use this command to display the state of the Spanning Tree backup root function.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-79 6.2.1.66 set sp antree backuproot Use this command to enable or di sable the Spanning T ree backu p root function.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-80 Matrix NSA Series Configuration Gui de 6.2.1.67 clear spantree backuproot Use this command to reset the Spanning T ree backup root function to the default state of disabled.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-81 6.2.1.68 show sp antree backuproottrapendable Use this command to display the state of th e Spanning T ree backup root trap function.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-82 Matrix NSA Series Configuration Gui de 6.2.1.69 set sp antree backuproottrapenable Use this command to enable or disable the Spanning T ree backup root trap function.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-83 6.2.1.70 clear sp antree backuproottrapenable Use this command to resets the Spanning T ree ba ckup root trap function to the default state of disabled.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-84 Matrix NSA Series Configuration Gui de 6.2.1.71 show spantree newroottrapendable Use this command to display the state of the Spanning T ree new root trap function .
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-85 6.2.1.72 set sp antree new roottrapenable Use this command to enable or disable the Spanning Tree ne w root trap function.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-86 Matrix NSA Series Configuration Gui de 6.2.1.73 clear spantree newroottrapenable Use this command to reset the Spanning T ree new ro ot trap function back to the default state of enabled.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-87 6.2.1.74 clear sp antree default Use this command to restore default values to a Spanning T ree.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-88 Matrix NSA Series Configuration Gui de 6.2.1.75 show spantree debug Use this command to display Spanning Tree debug counters for one or more ports.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Bridge Parameters Matrix NSA Series Configuration Guide 6-89 Example This example shows how to displa y Spanning T ree debug counters for link aggregatio n p ort 3, SID 0: Matrix(rw)-> show spantree debug port lag.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Bridge Parameters 6-90 Matrix NSA Series Configuration Gui de 6.2.1.76 clear spantree debug Use this command to clear Spanning T ree debug counters. clear spantree debug Synt ax Description None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configuration Guide 6-91 6.2.2 Configuring Sp anning T ree Port Parameters Purpose T o display a.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-92 Matrix NSA Series Configuration Gui de • show spantree adminedge ( Section 6.2.2.19 ) • set spantree adminedge ( Section 6.2.2.20 ) • clear spantree adminedge ( Section 6.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configuration Guide 6-93 6.2.2.1 show spantree portenable Use this command to display the port stat us on one or more Spanning T ree po rts.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-94 Matrix NSA Series Configuration Gui de 6.2.2.2 set spantree portenable Use this command to set the port status on one or more Spanning T ree ports. set spantree portenable port-string { enable | disable } Synt ax Description Command Default s None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configuration Guide 6-95 6.2.2.3 clear sp antree portenabl e Use this command to reset the default value for one or more Spanning T ree ports to enabled.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-96 Matrix NSA Series Configuration Gui de 6.2.2.4 show spantree port admin Use this command to display the status of th e Spanning Tree algorithm on one or more ports.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configuration Guide 6-97 6.2.2.5 set spantree port admin Use this command to disable or enable the Sp anning T ree algorithm on one or more ports. set spantree portadmin port-stri ng {disable | enable} Synt ax Description Command Default s None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-98 Matrix NSA Series Configuration Gui de 6.2.2.6 clear spantree port admin Use this command to reset the default Spanning T ree admin status to enable on one or more ports.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configuration Guide 6-99 6.2.2.7 set spantree protomigration Use this command to reset the protocol state migration machine for one or more Spanning T ree ports.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-100 Matrix NSA Series Configuration Guide 6.2.2.8 show spantree port st ate Use this command to display the state (blocking, forwarding, etc.) for a port on one or more Spanning T rees.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configu ration Guide 6-1 01 6.2.2.9 show spantree blocked port s Use this command to display the blocked ports in a Spanning T ree.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-102 Matrix NSA Series Configuration Guide 6.2.2.10 show spantree portpri Use this command to show the Spanning T ree priority for one or more ports. Port priority is a component of the port ID, which is one elemen t used in determining Sp anning T ree port roles.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configu ration Guide 6-1 03 6.2.2.1 1 set sp antree portpri Use this command to set a port’ s Spanning T ree priority .
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-104 Matrix NSA Series Configuration Guide 6.2.2.12 clear spantree portpri Use this command to reset the bridge priority of a Spanning T ree port to a default value of 128.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configu ration Guide 6-1 05 6.2.2.13 set sp antree porthello Use this command to set the hello tim e for one or more Spanning T ree ports. This is the time interval (in seconds) the port(s) will transmit BPDUs.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-106 Matrix NSA Series Configuration Guide 6.2.2.14 clear spantree porthello Use this command to reset the hello time for one or more Spanning T ree ports to the default of 2 seconds.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configu ration Guide 6-1 07 6.2.2.15 show sp antree portco st Use this command to display cost values assign ed to one or more Spanning T ree ports.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-108 Matrix NSA Series Configuration Guide 6.2.2.16 show spantree adminp athcost Use this command to display the admin path cost for a port on one or more Spanning T rees.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configu ration Guide 6-1 09 6.2.2.17 set sp antree adminpathcost Use this command to set the administrative path cost on a port and one or more Spanning T rees.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-1 10 Matrix NSA Series C onfiguration Guide 6.2.2.18 clear spantree adminp athcost Use this command to reset the Spanning T ree de fault value for port admin path cost to 0.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configuration Guide 6-1 1 1 6.2.2.19 show sp antree adminedg e Use this command to display the edge port administrative status for a port.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-1 12 Matrix NSA Series C onfiguration Guide 6.2.2.20 set spantree adminedge Use this command to set the edge port administrative status on a Spanning T ree port. set spantree adminedge port-string {true | false} Synt ax Description Command Default s None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configuration Guide 6-1 13 6.2.2.21 clear sp antree adminedge Use this command to reset a Spanning Tr ee port to non-edge status. clear spantree adminedge port-string Synt ax Description Command Default s None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-1 14 Matrix NSA Series C onfiguration Guide 6.2.2.22 show spantree operedge Use this command to display the Spanning T r ee edge port operating status for a port.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configuration Guide 6-1 15 6.2.2.23 show sp antree adminpoint Use this command to display the administrative poi nt-to-point status of the LAN segment attached to a Spanning T ree port.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-1 16 Matrix NSA Series C onfiguration Guide 6.2.2.24 show spantree operpoint Use this command to display the op erating point-to-point status of the LAN segment attached to a port.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Port Parameters Matrix NSA Series Configuration Guide 6-1 17 6.2.2.25 set sp antree adminpoint Use this command to set the administrativ e point-to-point stat us of the LAN segment attached to a Spanning T ree port.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Port Parameters 6-1 18 Matrix NSA Series C onfiguration Guide 6.2.2.26 clear spantree adminpoint Use this command to reset the administrative point-to-poi nt status of the LAN segment attached to a Spanning T ree port to auto mode.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configuration Guide 6-1 19 6.2.3 Configuring Sp anning T ree Loop Protect Features Purpose.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-120 Matrix NSA Series Configuration Guide • set spantree disputedbpduthreshold ( Section 6.2.3.18 ) • show spantree disputed bpduthreshold ( Section 6.2.3.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configu ration Guide 6-1 21 6.2.3.1 set spantree lp Use this command to enable or disable the Loop Protect feature per port and optionally , per SID.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-122 Matrix NSA Series Configuration Guide 6.2.3.2 show spantree lp Use this command to d isplay the Loop Protect status per port and/or per SID.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configu ration Guide 6-1 23 6.2.3.3 clear sp antree lp Use this command to return the Loop Protect st atus per port and optionally , per SID, to its default state of disabled.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-124 Matrix NSA Series Configuration Guide 6.2.3.4 show spantree lplock Use this command to d isplay the Loop Protect lock status per port and/o r per SID.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configu ration Guide 6-1 25 6.2.3.5 clear sp antree lplock Use this command to manually un lock a blocked port and optionally , per SID. The default state is unlocked .
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-126 Matrix NSA Series Configuration Guide 6.2.3.6 set spantree lpcap ablep artner Use this command to specify per port whether the link partner is Loop Protect capable.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configu ration Guide 6-1 27 Example This example shows how to set the Loop Prot ect capable partner to true for ge.1.1: Matrix(rw)-> set spantree lpcapabl epartner ge.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-128 Matrix NSA Series Configuration Guide 6.2.3.7 show spantree lpcap ablep artner Use this command to the Loop Protect capab ility of a link partner for one or more ports.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configu ration Guide 6-1 29 6.2.3.8 clear sp antree lpcapablep artner Use this command to reset the Loop Protect capabilit y of port link partners to the default state of false.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-130 Matrix NSA Series Configuration Guide 6.2.3.9 set sp antree lpthreshold Use this command to set the Loop Pr otect event threshold. set spantree lpthreshold value Synt ax Description Command Default s None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configu ration Guide 6-1 31 6.2.3.10 show sp antree lpthreshold Use this command to display the current value of the Loop Prote ct event threshold.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-132 Matrix NSA Series Configuration Guide 6.2.3.1 1 clear spantree lpthreshold Use this command to return the Loop Protect event threshol d to its default value of 3.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configu ration Guide 6-1 33 6.2.3.12 set sp antree lpwindo w Use this command to set the Loop Pr otect event window value in seconds. set spantree lpwindow value Synt ax Description Command Default s None.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-134 Matrix NSA Series Configuration Guide 6.2.3.13 show spantree lpwindow Use this command to display the curre nt Loop Protect event window value. show spantree lpwindow Synt ax Description None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configu ration Guide 6-1 35 6.2.3.14 clear sp antree lpwindow Use this command to reset the Loop Protect even t window to the default value of 180 seconds.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-136 Matrix NSA Series Configuration Guide 6.2.3.15 set spantree lptrapenable Use this command to enable or disable Loop Protect event notification. set spantree lptrapenable { enable | disable } Synt ax Description Command Default s None.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configu ration Guide 6-1 37 6.2.3.16 show sp antree lptrap enable Use this command to display the current st atus of Loop Protect event notification.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-138 Matrix NSA Series Configuration Guide 6.2.3.17 clear spantree lptrapenable Use this command to return the Loop Protect event notifica tion state to its default state of disabled.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configu ration Guide 6-1 39 6.2.3.18 set sp antree disputedbp duthreshold Use this command.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-140 Matrix NSA Series Configuration Guide Example This example shows how to set the disputed BPDU threshold.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configu ration Guide 6-1 41 6.2.3.19 show sp antree disputedbpduthreshold Use this command to display the current value of the disputed BPDU threshold.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-142 Matrix NSA Series Configuration Guide 6.2.3.20 clear spantree disputedbp duthreshold Use this command to return the disputed BPDU threshold to its de fault value of 0, meaning that disputed BPDU traps should no t be sent.
Spanning T ree Configura ti on Command Set Configuring Spanning T ree Loop Protect Features Matrix NSA Series Configu ration Guide 6-1 43 6.2.3.21 show sp antree nonforwardingreason Use this command to display the reason for placing a port in a non-forwarding state due to an exceptional condition.
Spanning T ree Configuration Comma nd Set Configuring Spanning T ree Loop Protect Features 6-144 Matrix NSA Series Configuration Guide.
Matrix NSA Series Configurati on Guide 7-1 7 802.1Q VLAN Configuration This chapter describes the Matrix system’ s ca pabilities to implement 802.1Q virtual LANs (VLANs). It documents how to: • Create, enable, disable and name a VLAN. • Review status and other in formation related to VLANs.
Process Overview: 802.1Q VLAN Configuration Port S tring Syntax Used in the CLI 7-2 Matrix NSA Series Configuration Guide 7.1.2 Port String Synt ax Used in the CLI For information on how to designate port numbers in the CLI syntax, refer to Section 4.
VLAN Configurati on Command Set Reviewing Existing VLANs Matrix NSA Series Configuration Guide 7-3 7.3 VLAN CONFIGURATION COMMAND SET 7.3.1 Reviewing Existing VLANs Purpose T o display a list of VLANs.
VLAN Configuration Command Set Reviewing Existing VLAN s 7-4 Matrix NSA Series Configuration Guide 7.3.1.1 show vlan Use this command to display all informatio n related to one or more VLANs.
VLAN Configurati on Command Set Reviewing Existing VLANs Matrix NSA Series Configuration Guide 7-5 Example This example shows how to display informatio n for VLAN 1. In this case, V LAN 1 is named “DEF AUL T VLAN” and it is enabled to operate. Ports allowed to transmit frames belonging to VLAN 1 are listed as egress ports.
VLAN Configuration Command Set Creating and Naming St atic VLANs 7-6 Matrix NSA Series Configuration Guide 7.3.2 Creating and Naming St atic VLANs Purpose T o create a new static VLAN, or to enable or disable existing VLAN(s ).
VLAN Configurati on Command Set Creating and Naming St atic VLANs Matrix NSA Series Configuration Guide 7-7 7.3.2.1 set vlan Use this command to create a new static IEEE 802 .1Q VLAN, or to enable or disable an existing VLAN. Once a VLAN is created, you can assign it a name using the set vlan name command described in Section 7.
VLAN Configuration Command Set Creating and Naming St atic VLANs 7-8 Matrix NSA Series Configuration Guide 7.3.2.2 set vlan name Use this command to set or change the ASCII name for a new or existing VLAN. set vlan name vlan-list vlan-name Synt ax Description Command Default s None.
VLAN Configurati on Command Set Creating and Naming St atic VLANs Matrix NSA Series Configuration Guide 7-9 7.3.2.3 clear vlan Use this command to remove a static VLAN from the list of VLANs reco gnized by the device. clear vlan vlan-list Synt ax Description Command Default s None.
VLAN Configuration Command Set Creating and Naming St atic VLANs 7-10 Matrix NSA Series Configuration Gui de 7.3.2.4 clear vlan n ame Use this command to remove the name of a VLAN from the VLAN list. clear vlan name vlan-list Synt ax Description Command Default s None.
VLAN Configurati on Command Set Assigning Port VLAN IDs (PVID s) and Ingress Filtering Matrix NSA Series Configuration Guide 7-1 1 7.3.3 Assigning Port VLAN IDs (P VIDs) and Ingress Filtering About P V IDs and Policy Classification to a VLAN Port VLAN IDs (PVIDs) assign VLAN IDs to untagg ed frames on one or more ports.
VLAN Configuration Command Set Assigning Port VLAN IDs (PVIDs) and Ingress Filtering 7-12 Matrix NSA Series Configuration Gui de • show port discard ( Section 7.3.3.9 ) • set port discard ( Section 7.3.3.10 ) • clear port discard ( Section 7.3.3.
VLAN Configurati on Command Set Assigning Port VLAN IDs (PVID s) and Ingress Filtering Matrix NSA Series Configuration Guide 7-13 7.3.3.1 show port vlan Use this command to display port VLAN identif ier (PVID) information. PVID determines the VLAN to which all untagged frames received on one or more ports will be classified.
VLAN Configuration Command Set Assigning Port VLAN IDs (PVIDs) and Ingress Filtering 7-14 Matrix NSA Series Configuration Gui de 7.3.3.2 set port vlan Use this command to configure the PVID (port VL AN identifier) for one or more ports. The PVID is used to classify untagged frames as they ingress into a given port.
VLAN Configurati on Command Set Assigning Port VLAN IDs (PVID s) and Ingress Filtering Matrix NSA Series Configuration Guide 7-15 Example This exampl e shows h ow to ad d fe.1.10 to th e port VLAN list of VLAN 4 (PVID 4). Since VLAN 4 is a new VLAN, it is created.
VLAN Configuration Command Set Assigning Port VLAN IDs (PVIDs) and Ingress Filtering 7-16 Matrix NSA Series Configuration Gui de 7.3.3.3 clear port vlan Use this command to reset a port’ s 802.1Q port VLAN ID (PVID) to the host VLAN ID 1. clear port vlan port-string Synt ax Description Command Default s None.
VLAN Configurati on Command Set Assigning Port VLAN IDs (PVID s) and Ingress Filtering Matrix NSA Series Configuration Guide 7-17 7.3.3.4 show vlan interface Use this command to display the MIB -II interface entry mapped to a VLAN.
VLAN Configuration Command Set Assigning Port VLAN IDs (PVIDs) and Ingress Filtering 7-18 Matrix NSA Series Configuration Gui de 7.3.3.5 set vlan interface Use this command to create, disable or enables a MIB-II interfa ce mapped to a VLAN.
VLAN Configurati on Command Set Assigning Port VLAN IDs (PVID s) and Ingress Filtering Matrix NSA Series Configuration Guide 7-19 7.3.3.6 clear vlan interface Use this command to clear the MIB -II interface entry ma pped to a VLAN. clear vlan interface vlan-list Synt ax Description Command Default s None.
VLAN Configuration Command Set Assigning Port VLAN IDs (PVIDs) and Ingress Filtering 7-20 Matrix NSA Series Configuration Gui de 7.3.3.7 show port ingress filter Use this command to show all ports that are en abled for port ingress filte ring, which limits incoming VLAN ID frames according to a port VLAN egress lis t.
VLAN Configurati on Command Set Assigning Port VLAN IDs (PVID s) and Ingress Filtering Matrix NSA Series Configuration Guide 7-21 7.3.3.8 set port ingress filter Use this command to discard all frames received w ith a VLAN ID that don’t match the port’ s VLAN egress list.
VLAN Configuration Command Set Assigning Port VLAN IDs (PVIDs) and Ingress Filtering 7-22 Matrix NSA Series Configuration Gui de 7.3.3.9 show port discard Use this command to display the frame discard mode for one or more ports. Ports can be set to discard frames based on whether or not they contain a VLAN tag.
VLAN Configurati on Command Set Assigning Port VLAN IDs (PVID s) and Ingress Filtering Matrix NSA Series Configuration Guide 7-23 7.3.3.10 set port discard Use this command to set the frame di scard mode on one or more ports. s et port discard port-string { tagged | untagged | none | both } Synt ax Description Command Default s None.
VLAN Configuration Command Set Assigning Port VLAN IDs (PVIDs) and Ingress Filtering 7-24 Matrix NSA Series Configuration Gui de 7.3.3.1 1 clear port discard Use this command to reset the frame discard mode to the factory default setting (none). clear port discard port-string Synt ax Description Command Default s None.
VLAN Configurati on Command Set Configuring the VLAN Egre ss List Matrix NSA Series Configuration Guide 7-25 7.3.4 Configuring the VLAN Egress List Purpose T o assign or remove ports on the egress list of a pa rticular VLAN. This dete rmines which ports will be eligible to transmit frames for a particular VLAN.
VLAN Configuration Command Set Configuring the VLAN Egress List 7-26 Matrix NSA Series Configuration Gui de 7.3.4.1 show port egress Use this command to display the VLAN membership for one or more ports.
VLAN Configurati on Command Set Configuring the VLAN Egre ss List Matrix NSA Series Configuration Guide 7-27 7.3.4.2 set vlan egress Use this command to add ports to the VLAN egress list for the device, or to prevent one or more ports from participating in a VLAN.
VLAN Configuration Command Set Configuring the VLAN Egress List 7-28 Matrix NSA Series Configuration Gui de This example shows how to forbid Fast Ethernet ports 13 through 15 in port group 1 from join.
VLAN Configurati on Command Set Configuring the VLAN Egre ss List Matrix NSA Series Configuration Guide 7-29 7.3.4.3 clear vlan egress Use this command to remove ports from a VLAN’ s egress list.
VLAN Configuration Command Set Configuring the VLAN Egress List 7-30 Matrix NSA Series Configuration Gui de 7.3.4.4 show vlan dynamic egress Use this command to display which VLANs are currently enabled for VLAN dynamic egress.
VLAN Configurati on Command Set Configuring the VLAN Egre ss List Matrix NSA Series Configuration Guide 7-31 7.3.4.5 set vlan dynamicegress Use this command to set the administrative status of one or more VLANs’ dynamic egress capability .
VLAN Configuration Command Set Creating a Secure Manag ement VLAN 7-32 Matrix NSA Series Configuration Gui de 7.3.5 Creating a Secu re Management VLAN If the Matrix Series device is to be configur ed for multiple VLAN’ s, it may be desirable to configure a management-only VLAN.
VLAN Configurati on Command Set Enabling/Disabling GVRP Matrix NSA Series Configuration Guide 7-33 7.3.6 Enabling/Disabling GVRP Purpose T o dynamically create VLANs across a switc he d network.
VLAN Configuration Command Set Enabling/Disabling GVRP 7-34 Matrix NSA Series Configuration Gui de Figure 7-1 Example of VLAN Prop agation via GVRP Configuring a VLAN on an 802.1Q switch creates a static VLAN entry . The entry will always remain registered and will not time out.
VLAN Configurati on Command Set Enabling/Disabling GVRP Matrix NSA Series Configuration Guide 7-35 Commands The commands used to configure GVRP are listed be low and described in the associated section as shown. • show gvrp ( Section 7.3.6.1 ) • show garp timer ( Section 7.
VLAN Configuration Command Set Enabling/Disabling GVRP 7-36 Matrix NSA Series Configuration Gui de 7.3.6.1 show gvrp Use this command to display GV RP configuration information.
VLAN Configurati on Command Set Enabling/Disabling GVRP Matrix NSA Series Configuration Guide 7-37 GVRP status Whether GV RP is enabled or disable d on the port. Last PDU Origin MAC address of the la st GVRP frame received on the port. T able 7-4 show gvrp Out put Details ( Continued) Output What It Displays.
VLAN Configuration Command Set Enabling/Disabling GVRP 7-38 Matrix NSA Series Configuration Gui de 7.3.6.2 show garp timer Use this command to display GARP ti mer values for one or more ports.
VLAN Configurati on Command Set Enabling/Disabling GVRP Matrix NSA Series Configuration Guide 7-39 Ta b l e 7 - 5 provides an explanation of t he command output. For detai ls on using the set gvrp command to enable or disable GVRP , refer to Section 7.
VLAN Configuration Command Set Enabling/Disabling GVRP 7-40 Matrix NSA Series Configuration Gui de 7.3.6.3 set gvrp Use this command to enable or disable GV RP globally on the device or on one or more p orts.
VLAN Configurati on Command Set Enabling/Disabling GVRP Matrix NSA Series Configuration Guide 7-41 7.3.6.4 clear gvrp Use this command to clear GVRP status or on one or more ports. clear gvrp [ port-string ] Synt ax Description Command Default s If port-string is not specified, GVRP status will be cleared for all ports.
VLAN Configuration Command Set Enabling/Disabling GVRP 7-42 Matrix NSA Series Configuration Gui de 7.3.6.5 set garp timer Use this command to adjust the values of the join, le ave, and leaveall timers. set garp timer {[j oin timer -value ] [leave timer-value ] [ leaveall timer -value ]} port-string Synt ax Description Command Default s None.
VLAN Configurati on Command Set Enabling/Disabling GVRP Matrix NSA Series Configuration Guide 7-43 This example shows how to set the leaveall timer value to 20000 centiseconds for all ports: Matrix(rw)-> set garp timer leavea ll 20000 *.
VLAN Configuration Command Set Enabling/Disabling GVRP 7-44 Matrix NSA Series Configuration Gui de 7.3.6.6 clear garp timer Use this command to reset GARP timers back to default values. clear garp timer { [j oin ] [leave ] [ leaveall ]} port-string Synt ax Description Command Default s At least one optional para meter must be entered.
Matrix NSA Series Configurati on Guide 8-1 8 Policy Classification Configuration This chapter describes the Policy Classificati on set of commands and how to use them.
Process Overview: Policy Classification Configuration Configuring Policy Profiles 8-2 Matrix NSA Series Configuration Guide 8.2 PROCESS OVERVIEW: POLICY CLASSIFICATION CONFIGURATION Use the following steps as a guide to co nfigure policy clas sification on the device: 1.
Policy Classification Configurati on Command Set Configuring Policy Pro fi les Matrix NSA Series Configuration Guide 8-3 • show policy syslog ( Section 8.3.1.1 1 ) • set policy syslog ( Section 8.3.1.12 ) • clear policy syslog ( Section 8.3.1.13 ) • set policy maptable ( Section 8.
Policy Classification Config uration Command Set Configuring Policy Profiles 8-4 Matrix NSA Series Configuration Guide 8.3.1.1 show policy profile Use this command to display policy profile information.
Policy Classification Configurati on Command Set Configuring Policy Pro fi les Matrix NSA Series Configuration Guide 8-5 Ta b l e 8 - 1 provides an explanation of the co mma nd output. T able 8-1 show policy profile Output Det ails Output What It Displays.
Policy Classification Config uration Command Set Configuring Policy Profiles 8-6 Matrix NSA Series Configuration Guide 8.3.1.2 set policy profile Use this command to create a poli cy profile entry .
Policy Classification Configurati on Command Set Configuring Policy Pro fi les Matrix NSA Series Configuration Guide 8-7 Command Default s If optional parameters are not specified, none will be applied. Command T ype Switch command. Command Mode Read-W rite.
Policy Classification Config uration Command Set Configuring Policy Profiles 8-8 Matrix NSA Series Configuration Guide 8.3.1.3 clear policy profile Use this command to dele te a policy profile entry . clear policy profile pr ofile-index Synt ax Description Command Default s None.
Policy Classification Configurati on Command Set Configuring Policy Pro fi les Matrix NSA Series Configuration Guide 8-9 8.3.1.4 show policy invalid Displays information ab out the action the device will apply on an invalid or unknown policy . show policy invalid { action | count | all } Synt ax Description Command Default s None.
Policy Classification Config uration Command Set Configuring Policy Profiles 8-10 Matrix NSA Series Configuration Gui de 8.3.1.5 set policy in valid action Use this command to assign the action the device will apply to an invalid or unknown policy .
Policy Classification Configurati on Command Set Configuring Policy Pro fi les Matrix NSA Series Configuration Guide 8-1 1 8.3.1.6 clear policy invalid action Use this command to reset the action the device wi ll apply to an invalid or unknown policy to the default action of applyi ng the default policy .
Policy Classification Config uration Command Set Configuring Policy Profiles 8-12 Matrix NSA Series Configuration Gui de 8.3.1.7 set port tci overwrite Use this command to enable or disable the TCI overwrite function on one or more ports.
Policy Classification Configurati on Command Set Configuring Policy Pro fi les Matrix NSA Series Configuration Guide 8-13 8.3.1.8 show policy accounting Use this command to display th e status of policy accounting. show policy accounting Synt ax Description None.
Policy Classification Config uration Command Set Configuring Policy Profiles 8-14 Matrix NSA Series Configuration Gui de 8.3.1.9 set policy accou nting Use this command to enable or disable p olicy acc ounting, whic h controls the collection of classification rule statistics.
Policy Classification Configurati on Command Set Configuring Policy Pro fi les Matrix NSA Series Configuration Guide 8-15 8.3.1.10 clear policy accounting Use this command to restore policy acco unting to its default state of enabled. clear policy accounting Synt ax Description None.
Policy Classification Config uration Command Set Configuring Policy Profiles 8-16 Matrix NSA Series Configuration Gui de 8.3.1.1 1 show policy syslog Use this command to show the formatting of rule usage messages . The messages will be either machine-readable or human-readable.
Policy Classification Configurati on Command Set Configuring Policy Pro fi les Matrix NSA Series Configuration Guide 8-17 8.3.1.12 set policy syslog Use this command to set the rule usage messages as either machin e-readable or human-readable. set policy syslog machine-re adable {enable | disable} Synt ax Description Command Default s None.
Policy Classification Config uration Command Set Configuring Policy Profiles 8-18 Matrix NSA Series Configuration Gui de 8.3.1.13 clear policy syslog Use this command to clear the rule usage messages to the default state of disabled (human-readable). clear policy syslog machine-readable Synt ax Description Command Default s None.
Policy Classification Configurati on Command Set Configuring Policy Pro fi les Matrix NSA Series Configuration Guide 8-19 8.3.1.14 set policy maptable Use this command to set the Set VLAN ID - Policy Profile mappings table. set policy maptable { vlan-list profile-index | response {tunnel | policy | both}} Synt ax Description Command Default s None.
Policy Classification Config uration Command Set Configuring Policy Profiles 8-20 Matrix NSA Series Configuration Gui de 8.3.1.15 show pol icy mapt able Use this command to display the VLAN ID - Policy Profile mappings table. show policy maptable vlan-list Synt ax Description Command Default s None.
Policy Classification Configurati on Command Set Configuring Policy Pro fi les Matrix NSA Series Configuration Guide 8-21 8.3.1.16 clear policy mapt able Use this command to clea r the VLAN ID - Policy Profile mappings table. clear policy maptable vlan-list | response Synt ax Description Command Default s None.
Policy Classification Config uration Command Set Assigning Classificati on Rule s to Policy Profiles 8-22 Matrix NSA Series Configuration Gui de 8.3.2 Assigning Classi fication Rules to Policy Profiles Purpose T o review , assign and unassign classification an d admin rules.
Policy Classification Configurati on Command Set Assigning Classification Rules to Policy Profiles Matrix NSA Series Configuration Guide 8-23 8.3.2.1 show policy rule Use this command to display policy cla ssification and admin rule information.
Policy Classification Config uration Command Set Assigning Classificati on Rule s to Policy Profiles 8-24 Matrix NSA Series Configuration Gui de Command Default s • If port-string , rule status, storage type, Syslog state, trap, and usage-list are not specified, all rules related to othe r specifications will be displayed.
Policy Classification Configurati on Command Set Assigning Classification Rules to Policy Profiles Matrix NSA Series Configuration Guide 8-25 Examples This example shows how to display policy classif .
Policy Classification Config uration Command Set Assigning Classificati on Rule s to Policy Profiles 8-26 Matrix NSA Series Configuration Gui de PortStr Ingress port(s) to which this rule applies. RS Whether or not the status of th is rule is active (A), not in service or not ready .
Policy Classification Configurati on Command Set Assigning Classification Rules to Policy Profiles Matrix NSA Series Configuration Guide 8-27 8.3.2.2 show policy cap ability Use this command to display all policy classification capabilities su pported by your Matrix S eries device.
Policy Classification Config uration Command Set Assigning Classificati on Rule s to Policy Profiles 8-28 Matrix NSA Series Configuration Gui de Matrix(rw)-> show policy capability The following su.
Policy Classification Configurati on Command Set Assigning Classification Rules to Policy Profiles Matrix NSA Series Configuration Guide 8-29 8.3.2.3 set policy classify Use this command to assign incomi ng un tagged frames to a specif ic policy profile, classification and to VLAN or Class-of-Service classification rules.
Policy Classification Config uration Command Set Assigning Classificati on Rule s to Policy Profiles 8-30 Matrix NSA Series Configuration Gui de Command Default s • If mask is not specified, all data bits will be considered relevant. Command T ype Switch command.
Policy Classification Configurati on Command Set Assigning Classification Rules to Policy Profiles Matrix NSA Series Configuration Guide 8-31 8.3.2.4 set policy rule Use this command to assign inco ming untagged frames to a specific policy profile and to VLAN or Class-of-Service classification rules.
Policy Classification Config uration Command Set Assigning Classificati on Rule s to Policy Profiles 8-32 Matrix NSA Series Configuration Gui de Command Default s • If mask is not specified, all data bits will be considered relevant. tcpsourceport Classifies based on TCP source port .
Policy Classification Configurati on Command Set Assigning Classification Rules to Policy Profiles Matrix NSA Series Configuration Guide 8-33 • If port-string is not specified, rule will be scoped to all ports. Command T ype Switch command. Command Mode Read-W rite.
Policy Classification Config uration Command Set Assigning Classificati on Rule s to Policy Profiles 8-34 Matrix NSA Series Configuration Gui de ipfrag Not applicable.
Policy Classification Configurati on Command Set Assigning Classification Rules to Policy Profiles Matrix NSA Series Configuration Guide 8-35 8.3.2.5 clear policy rule Use this command to delete one or all policy classification rule entries.
Policy Classification Config uration Command Set Assigning Classificati on Rule s to Policy Profiles 8-36 Matrix NSA Series Configuration Gui de Command Default s When applicable, data , mask , and port-string must be specified for in dividual rules to be cle ared.
Policy Classification Configurati on Command Set Assigning Classification Rules to Policy Profiles Matrix NSA Series Configuration Guide 8-37 8.3.2.6 clear policy all-rules Use this command to remove all admin and classification rules. clear policy all-rules Synt ax Description None.
Policy Classification Config uration Command Set Assigning Classificati on Rule s to Policy Profiles 8-38 Matrix NSA Series Configuration Gui de 8.3.2.7 set policy po rt Use this command to assign an administrative rule to a port. set policy port port-name admin-id Synt ax Description Command Default s None.
Policy Classification Configurati on Command Set Assigning Classification Rules to Policy Profiles Matrix NSA Series Configuration Guide 8-39 8.3.2.8 show policy allowed-type Use this command to display a list of currently supported traffic rules applied to the admininstrative profile for one or more ports.
Policy Classification Config uration Command Set Assigning Classificati on Rule s to Policy Profiles 8-40 Matrix NSA Series Configuration Gui de Example This example shows how to sh ow information about policie s allowed on port ge.1 .5: Matrix(rw)-> show policy allowed-type ge .
Policy Classification Configurati on Command Set Assigning Classification Rules to Policy Profiles Matrix NSA Series Configuration Guide 8-41 8.3.2.9 set policy allowed-type Use this command to assign a list of traffic rules that can be applie d to the admin profile for one or more ports.
Policy Classification Config uration Command Set Assigning Classificati on Rule s to Policy Profiles 8-42 Matrix NSA Series Configuration Gui de 8.3.2.10 clear policy allo wed-type Use this command to clear the list of traf fic rules currently assigned to the admin profile fo r one or more ports.
Policy Classification Configurati on Command Set Assigning Classification Rules to Policy Profiles Matrix NSA Series Configuration Guide 8-43 8.3.2.1 1 clear policy port-hit Use this command to clear rule port hit indications on one or more ports. clear policy port-hit { all | port-list port-list } Synt ax Description Command Default s None.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-44 Matrix NSA Series Configuration Gui de 8.3.3 Configuring Policy Cl ass of Service (CoS) Using Port-Based.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-45 Y ou can add to these default configurations by defining new port groupings, and assigning inboun d rate limiters or transmit queues and priorities.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-46 Matrix NSA Series Configuration Gui de • show cos unit ( Section 8.3.3.4 ) • show cos port-config ( Section 8.3.3.5 ) • set cos port-config irl ( Section 8.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-47 8.3.3.1 show cos st ate Use this command to display the Class of Service enable state. show cos st ate Synt ax Description None.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-48 Matrix NSA Series Configuration Gui de 8.3.3.2 set cos state Use this command to enable or disable Class of Service. set cos state { enable | disable } Synt ax Description Command Default s None.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-49 8.3.3.3 show cos port-type Use this command to display Class of Service po rt type configurations.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-50 Matrix NSA Series Configuration Gui de Example This example shows how to display all Class of Serv ice por t type information. In this case, no new port groups have been configured: Ta b l e 8 - 5 provides an explanation of the command output.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-51 Numb T able 8-5 show cos port-type Output Det ails Output What It Displays... Index Port type index. Port type 0 designates the Matrix Platinum Series 7G4270-12 mo dule, and port type 1 d esignates all other modules.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-52 Matrix NSA Series Configuration Gui de 8.3.3.4 show cos unit Use this command to display Class of Service units of measure information, including rate type, minimum and maximum limits of the port groups, and their respective granularity .
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-53 8.3.3.5 show cos port-config Use this command to display Class of Service port group configurations.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-54 Matrix NSA Series Configuration Gui de Example This example shows how to show all Class of Service port .
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-55 8.3.3.6 set cos port-config irl Use this command to set the Class .
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-56 Matrix NSA Series Configuration Gui de 8.3.3.7 clear cos po rt-config irl Use this command to clear a no.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-57 8.3.3.8 set cos port-config txq Use this command to set the Class .
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-58 Matrix NSA Series Configuration Gui de Example This example shows how to create a CoS transmit qu eue port group entry nam ed “test txq” with a port group ID of 2 and a po rt type ID of 1: Matrix(rw)-> set cos port-config txq 2.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-59 8.3.3.9 clear cos port-config txq Use this command to clear one or.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-60 Matrix NSA Series Configuration Gui de 8.3.3.10 show cos port-resource Use this command to display Class of Serv ice port resource configuration information.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-61 Example This example shows how to show all inbound rate limitin g port resource config uration information for port group 0.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-62 Matrix NSA Series Configuration Gui de 8.3.3.1 1 set cos port-resource irl Use this command to configure a Class of Serv ice inbound rate limiting port resource entry .
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-63 Command T ype Switch command. Command Mode Read-W rite. Example This example shows how to config ure Class of Service port resource IRL entry 0 for port group 0.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-64 Matrix NSA Series Configuration Gui de 8.3.3.12 clear cos po rt-resource irl Use this command to clear o.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-65 8.3.3.13 set cos port-resource txq Use this command to configure a Cl ass of Service transmit queue port resource entry .
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-66 Matrix NSA Series Configuration Gui de Example This example shows how to conf igure a Class of Service port resource entry for port group 0.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-67 8.3.3.14 clear cos port-resource txq Use this command to clear one or all Class of Service transmit queue port resource entry .
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-68 Matrix NSA Series Configuration Gui de 8.3.3.15 show cos reference Use this command to display Class of Service port reference information.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-69 Example This example shows how to show all transmit queue reference conf iguration information for port group 0.1: Matrix(rw)-> show cos reference tx q 0.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-70 Matrix NSA Series Configuration Gui de 8.3.3.16 set cos reference irl Use this command to set a Class of Service inbound rate limiting reference configuration.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-71 8.3.3.17 clear cos reference irl Use this command to clear one or all Class of Service inbound rate limiting reference configurations.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-72 Matrix NSA Series Configuration Gui de 8.3.3.18 set cos reference txq Use this command to set a Class of Service inbound rate limiting reference configuration.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-73 8.3.3.19 clear cos reference txq Use this command to clear one or all non-defa ult Class of Service transmit queue reference configurations.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-74 Matrix NSA Series Configuration Gui de 8.3.3.20 show cos settings Use this command to display Class of Service parameters. show cos settings [ cos-list ] Synt ax Description Command Default s If not specified, all CoS entries will be displayed.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-75 8.3.3.21 set cos settings Use this command to configure a Cl ass of Service entry .
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-76 Matrix NSA Series Configuration Gui de 8.3.3.22 clear cos setting s Use this command to clear Class of Service entry settings.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-77 8.3.3.23 show cos violation irl Use this command to display Class of Service violation configurations.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-78 Matrix NSA Series Configuration Gui de 8.3.3.24 clear cos vi olation irl Use this command to clear Class of Service in bound rate limiting violation conf igurations.
Policy Classification Configurati on Command Set Configuring Policy Class of Service (CoS) Matrix NSA Series Configuration Guide 8-79 8.3.3.25 clear cos all-entries Use this command to clears all Class of Serv ice entries except priority settings 0 - 7.
Policy Classification Config uration Command Set Configuring Policy Class of Service (CoS) 8-80 Matrix NSA Series Configuration Gui de.
Matrix NSA Series Configurati on Guide 9-1 9 Port Priority and Rate Limiting Configuration This chapter describes the Port Pr iority and Rate Limiting set of commands and how to use them.
Process Overview: Port Priority and Rate Limiting Configuration Configuring Port Pri ority 9-2 Matrix NSA Series Configuration Guide 9.2 PROCESS OVERVIEW: PORT PRIORITY AND RATE LIMITING CONFIGURATION Use the following steps as a guide to the port prio rity , QoS, and rate lim iting configuration process: 1.
Port Priority and Rate Limiting Configuration Command Set Configuring Port Priority Matrix NSA Series Configuration Guide 9-3 9.3.1.1 show port priority Use this command to display the 802.
Port Priority and Rate Limiting Configuratio n Command Set Configuring Port Pri ority 9-4 Matrix NSA Series Configuration Guide 9.3.1.2 set port p riority Use this command to set the 802. 1D (802.1p) Class-of-Serv ice tr ansmit queue priority (0 through 7) on each port.
Port Priority and Rate Limiting Configuration Command Set Configuring Port Priority Matrix NSA Series Configuration Guide 9-5 9.3.1.3 clear port priority Use this command to reset the cu rrent CoS port priority setting to 0. This will cause all frames received without a priority value in its header to be set to priority 0.
Port Priority and Rate Limiting Configuratio n Command Set Configuring Priority to T r ansmit Qu eue Mapping 9-6 Matrix NSA Series Configuration Guide 9.
Port Priority and Rate Limiting Configuration Command Set Configuring Priority to T ransmit Queue Mapping Matrix NSA Series Configuration Guide 9-7 9.3.
Port Priority and Rate Limiting Configuratio n Command Set Configuring Priority to T r ansmit Qu eue Mapping 9-8 Matrix NSA Series Configuration Guide This example shows how to display the tran smit queues associated with priority 3. Matrix(rw)-> show port priority-queue 3 fe.
Port Priority and Rate Limiting Configuration Command Set Configuring Priority to T ransmit Queue Mapping Matrix NSA Series Configuration Guide 9-9 9.3.2.2 set port priority-queue Use this command to map 802.1D (8 02.1p) priorities to transmit queues.
Port Priority and Rate Limiting Configuratio n Command Set Configuring Priority to T r ansmit Qu eue Mapping 9-10 Matrix NSA Series Configuration Gui de 9.3.2.3 clear port priority-queue Use this command to reset port priority queue se ttings back to defaults for one or more ports.
Port Priority and Rate Limiting Configuration Command Set Configuring Port T raffic Rate Limiting Matrix NSA Series Configuration Guide 9-1 1 9.3.3 Configuring Port T raffic Rate Limiting Purpose T o limit the rate of inbound traffic on the Matrix Se ries devic e on a per port/priority basis.
Port Priority and Rate Limiting Configuratio n Command Set Configuring Port T raffic Rate Limiting 9-12 Matrix NSA Series Configuration Gui de 9.3.3.1 show port ratelimit Use this command to show the traf fic rate limiting configur ation on one or more ports.
Port Priority and Rate Limiting Configuration Command Set Configuring Port T raffic Rate Limiting Matrix NSA Series Configuration Guide 9-13 Ta b l e 9 - 1 shows a detailed explanatio n of the command output. T able 9-1 show port ratelimit Output Det ails Output What It Displays.
Port Priority and Rate Limiting Configuratio n Command Set Configuring Port T raffic Rate Limiting 9-14 Matrix NSA Series Configuration Gui de 9.3.3.2 set port rateli mit Use this command to configure the traffic rate limiting st atus and threshold (in kilobytes per second) for one or more ports.
Port Priority and Rate Limiting Configuration Command Set Configuring Port T raffic Rate Limiting Matrix NSA Series Configuration Guide 9-15 Command Mode Read-W rite. Example This example shows how to: • globally enable rate limiting • configure rate limiting for inbound traffic on port fe .
Port Priority and Rate Limiting Configuratio n Command Set Configuring Port T raffic Rate Limiting 9-16 Matrix NSA Series Configuration Gui de 9.3.3.3 clear port ratelimit Use this command to clear rate limiti ng parameters for one or more ports.
Matrix NSA Series Configuration Guide 10-1 10 IGMP Configuration This chapter describes the IGMP Configurati on set of commands and how to use them. 10.1 ABOUT IP MULTICA ST GROUP MANAGEMENT The Internet Group Management Protocol (IGMP) run s between hosts and their immediat ely neighboring multic ast switch device.
IGMP Configuration Summary 10-2 Matrix N SA Series Configuration Guide In addition to passively monitoring IGMP query a nd report messages, the Matrix Ser ies device can also actively send IGMP query mes sages to learn loca tions of mult icast switches and me mber hosts in multicast groups within each VLAN.
IGMP Configuration Command Set Enabling / Disabling IGMP Matrix NSA Series Configuration Guide 10-3 10.4 IGMP CONFIGURATION COMMAND SET 10.4.1 Enabling / Disabling IGMP Purpose T o display IGMP information and to enable or disable IGMP snooping on the device.
IGMP Configuration Command Set Enabling / Disabling IGMP 10-4 Matrix N SA Series Configuration Guide 10.4.1.1 show igmp enable Use this command to display the status of IGMP on one or more VLAN(s). show igmp enable vlan-list Synt ax Description Command Default s None.
IGMP Configuration Command Set Enabling / Disabling IGMP Matrix NSA Series Configuration Guide 10-5 10.4.1.2 set igmp en able Use this command to enable IGMP on one or more VLANs. set igmp enable vlan-list Synt ax Description Command Default s None. Command T ype Switch command.
IGMP Configuration Command Set Enabling / Disabling IGMP 10-6 Matrix N SA Series Configuration Guide 10.4.1.3 set igmp disable Use this command to disable IGMP on one or more VLANs. set igmp enable vlan-list Synt ax Description Command Default s None.
IGMP Configuration Command Set Configuring IGMP Matrix NSA Series Configuration Guide 10-7 10.4.2 Configuring IGMP Purpose T o display and set IGMP configuration paramete rs, including query inte rval and response time settings, and to create and configure static IGMP entries.
IGMP Configuration Command Set Configuring IGMP 10-8 Matrix N SA Series Configuration Guide 10.4.2.1 show igmp query Use this command to display the IGMP query status of one or more VLANs. show igmp query vlan-list Synt ax Description Command Default s None.
IGMP Configuration Command Set Configuring IGMP Matrix NSA Series Configuration Guide 10-9 10.4.2.2 set igmp query-enab le Use this command to enable IGMP querying on one or more VLANs. set igmp query -enable vlan-list Synt ax Description Command Default s None.
IGMP Configuration Command Set Configuring IGMP 10-10 M atrix NSA Series Configurati on Guide 10.4.2.3 set igmp query-disable Use this command to disable IGMP querying on one or more VLANs. set igmp query-disable vlan-list Synt ax Description Command Default s None.
IGMP Configuration Command Set Configuring IGMP Matrix NSA Series Configuration Guide 10-1 1 10.4.2.4 show igmp grp-full-action Use this command to show what action to take with multicast frames when the multicast IGMP group table is full show igmp grp-full-action Command Default s None.
IGMP Configuration Command Set Configuring IGMP 10-12 M atrix NSA Series Configurati on Guide 10.4.2.5 set igmp grp-full-action Use this command to determine wh at action to take with multicast frames when the multicast group table is full.
IGMP Configuration Command Set Configuring IGMP Matrix NSA Series Configu ration Guide 10-13 10.4.2.6 show igmp config Use this command to display IGMP configuration informa tion for one or more VLANs. show igmp config vlan-list Synt ax Description Command Default s None.
IGMP Configuration Command Set Configuring IGMP 10-14 M atrix NSA Series Configurati on Guide T able 10 -1 show igmp co nfig Output Details Output What It Displays... VlanQueryInterval Frequency (in seconds) of host-query frame transmissions. VlanStatus Whether or not VLAN configuratio n is Active or Not in Service .
IGMP Configuration Command Set Configuring IGMP Matrix NSA Series Configu ration Guide 10-15 10.4.2.7 set igmp co nfig Use this command to configure IGMP settings on one or more VLANs.
IGMP Configuration Command Set Configuring IGMP 10-16 M atrix NSA Series Configurati on Guide Example This example shows how to set the IGMP qu ery interval time to 25 0 se conds on VLAN 1: Matrix(rw).
IGMP Configuration Command Set Configuring IGMP Matrix NSA Series Configu ration Guide 10-17 10.4.2.8 set igmp delete Use this command to remove IGMP config uration settings for one or more VLANs. set igmp delete vlan-list Synt ax Description Command Default s None.
IGMP Configuration Command Set Configuring IGMP 10-18 M atrix NSA Series Configurati on Guide 10.4.2.9 show igmp group s Use this command to display in formation abou t IGMP groups known to one or more VLANs.
IGMP Configuration Command Set Configuring IGMP Matrix NSA Series Configu ration Guide 10-19 10.4.2.10 sho w igmp static Use this command to display static IGMP po rts for one or more VLANs or IGMP groups.
IGMP Configuration Command Set Configuring IGMP 10-20 M atrix NSA Series Configurati on Guide 10.4.2.1 1 set igmp add-st atic Use this command to create a new static IGMP entry , or to add one or more new ports to an existing entry .
IGMP Configuration Command Set Configuring IGMP Matrix NSA Series Configu ration Guide 10-21 10.4.2.12 set igmp remove-st atic Use this command to delete a sta tic IGMP entry , or to re move one or more ports from an existing entry .
IGMP Configuration Command Set Configuring IGMP 10-22 M atrix NSA Series Configurati on Guide 10.4.2.13 show igmp protocols Use this command to display the binding of IP protocol id to IGMP classification show igmp protocols Command Default s None. Command T ype Switch command.
IGMP Configuration Command Set Configuring IGMP Matrix NSA Series Configu ration Guide 10-23 10.4.2.14 set igmp protocols Use this command to changes the IGMP classification of received IP frames set igmp protocols [ classi fication classification ] [ pr otocol-id protocol-id ] [ modify ] Synt ax Description Command Default s None.
IGMP Configuration Command Set Configuring IGMP 10-24 M atrix NSA Series Configurati on Guide 10.4.2.15 clear igmp protocols Use this command to clear the binding of IP protocol id to IGMP classification clear igmp pr otocols [ protocol-id pr otocol-id ] Synt ax Description Command Default s None.
IGMP Configuration Command Set Configuring IGMP Matrix NSA Series Configu ration Guide 10-25 10.4.2.16 show igmp vlan Use this command to display IGMP information for a specific VLAN. show igmp vlan [ vlan-list ] Synt ax Description Command Default s None Command T ype Switch command.
IGMP Configuration Command Set Configuring IGMP 10-26 M atrix NSA Series Configurati on Guide 10.4.2.17 show igmp reporters Use this command to display IGMP reporter information. show igmp reporters [ portlist portlist ] [ group gr oup ] [ vlan-list vlan-list ] [ sip sip ] Synt ax Description Command Default s None.
IGMP Configuration Command Set Configuring IGMP Matrix NSA Series Configu ration Guide 10-27 10.4.2.18 show igmp flow Use this command to displa y IGMP flow information. show igmp flows [ portlist portlist ] [ group gr oup ] [ vlan-list vlan-list ] [ sip sip ] Synt ax Description Command Default s None.
IGMP Configuration Command Set Configuring IGMP 10-28 M atrix NSA Series Configurati on Guide 10.4.2.19 show igmp counters Use this command to displa y IGMP counter information. show igmp counters Synt ax Description None. Command Default s None. Command T ype Switch command.
IGMP Configuration Command Set Configuring IGMP Matrix NSA Series Configu ration Guide 10-29 10.4.2.20 show igmp number-groups Use this command to display the number of multicast groups suppor ted by the Matrix device.
IGMP Configuration Command Set Configuring IGMP 10-30 M atrix NSA Series Configurati on Guide.
Matrix NSA Series Configura tion Guide 1 1-1 11 Logging and Network Management This chapter describes switch-rela ted logging and network mana gement comman ds and how to use them. 1 1.1 PROCESS OVERVIEW : NETWORK MANAGEMENT Switch-related network management tasks include the following: • Configuring System Logg ing ( Section 1 1.
Logging And Network Ma nagement Command Set Configuring System Logging 1 1-2 Matrix NSA Series Configuration Gui de 1 1.2 LOGGING AND NETWORK MANAGEMENT COMMAND SET 1 1.
Logging And Network Management Command Set Configuring System Logging Matrix NSA Series Configuration Guide 1 1-3 1 1.2.1.1 show logging all Use this command to display all config uration information for system logging. show logging a ll Synt ax Description None.
Logging And Network Ma nagement Command Set Configuring System Logging 1 1-4 Matrix NSA Series Configuration Gui de Example This example shows how to displa y all system logging information: Ta b l e 1 1 - 1 provides an explanati on of the command output.
Logging And Network Management Command Set Configuring System Logging Matrix NSA Series Configuration Guide 1 1-5 T able 1 1-1 show logging all Output Det ails Output What It Displays... Application A mnemonic abbreviatio n of the textual description for applications being logged.
Logging And Network Ma nagement Command Set Configuring System Logging 1 1-6 Matrix NSA Series Configuration Gui de 1 1.2.1.2 show logging server Use this command to display the Syslog configuration for a particular server .
Logging And Network Management Command Set Configuring System Logging Matrix NSA Series Configuration Guide 1 1-7 1 1.2.1.3 set logging server Use this command to configure a Syslog server .
Logging And Network Ma nagement Command Set Configuring System Logging 1 1-8 Matrix NSA Series Configuration Gui de Command Default s • If ip-addr is not specified, an entry in the Syslog server table will be created with the specified index number and a message will display indica ting that no IP address has been assigned.
Logging And Network Management Command Set Configuring System Logging Matrix NSA Series Configuration Guide 1 1-9 1 1.2.1.4 clear logging server Use this command to remove a server from the Syslog server table. clear logging server index Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Configuring System Logging 1 1-10 Matrix NSA Series C onfiguration Guide 1 1.2.1.5 show logging default Use this command to display th e Syslog server default values. show logging default Synt ax Description None.
Logging And Network Management Command Set Configuring System Logging Matrix NSA Series Configuration Guide 1 1-1 1 1 1.2.1.6 set logging default Use this command to set logging default values. set logging default {[ facility f acility ] [ se verity severity ] port port ]} Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Configuring System Logging 1 1-12 Matrix NSA Series C onfiguration Guide 1 1.2.1.7 clear logging default Use this command to reset logging default values. clear logging default {[ facility ] [ severity ] [ port ]} Synt ax Description Command Default s • At least one optional para meter must be entered.
Logging And Network Management Command Set Configuring System Logging Matrix NSA Series Configuration Guide 1 1-13 1 1.2.1.8 show logging application Use this command to display the severity level of Syslog messages for one or all applications configured for logging on your system.
Logging And Network Ma nagement Command Set Configuring System Logging 1 1-14 Matrix NSA Series C onfiguration Guide Example This example shows how to display system logg ing information pertaining to the all supported applications. This example shows how to display system logging information pertaining to the SNMP application.
Logging And Network Management Command Set Configuring System Logging Matrix NSA Series Configuration Guide 1 1-15 T able 1 1-2 show logging application Output Details Output What It Displays... Application A mnemonic abbreviatio n of the textual description for applications being logged.
Logging And Network Ma nagement Command Set Configuring System Logging 1 1-16 Matrix NSA Series C onfiguration Guide 1 1.2.1.9 set logging application Use this command to set the severity level of lo g messages and the server(s ) to which messages will be sent for one or all applications.
Logging And Network Management Command Set Configuring System Logging Matrix NSA Series Configuration Guide 1 1-17 Command Default s • If level is not specified, none will be applied. • If server is not specified, messages will be sent to all Syslog servers.
Logging And Network Ma nagement Command Set Configuring System Logging 1 1-18 Matrix NSA Series C onfiguration Guide Command Mode Read-W rite. Example This example shows how to set the severity level .
Logging And Network Management Command Set Configuring System Logging Matrix NSA Series Configuration Guide 1 1-19 1 1.2.1.10 clear logging application Use this command to reset the logg ing severity level for one or all applications to the default value of 6 (notifications of significant conditions).
Logging And Network Ma nagement Command Set Configuring System Logging 1 1-20 Matrix NSA Series C onfiguration Guide 1 1.2.1.1 1 show logging local Use this command to display the state of messag e logging to the console and a persistent file. show logging local Synt ax Description None.
Logging And Network Management Command Set Configuring System Logging Matrix NSA Series Configuration Guide 1 1-21 1 1.2.1.12 set logging local Use this command to config ure log messages to the console and a persistent file. set logging local console { enable | disable } file { enable | disable } Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Configuring System Logging 1 1-22 Matrix NSA Series C onfiguration Guide 1 1.2.1.13 clear logging local Use this command to clear the console and pe rsistent store logging for the local session. clear logging local Synt ax Description None.
Logging And Network Management Command Set Configuring System Logging Matrix NSA Series Configuration Guide 1 1-23 1 1.2.1.14 set logging here Use this command to enable or disable the current CLI session as a Syslog destination.
Logging And Network Ma nagement Command Set Configuring System Logging 1 1-24 Matrix NSA Series C onfiguration Guide 1 1.2.1.15 clear logging here Use this command to clear the logging state for the current CLI session. clear logging here Synt ax Description None.
Logging And Network Management Command Set Configuring System Logging Matrix NSA Series Configuration Guide 1 1-25 1 1.2.1.16 show logging buffer Use this command to display the last 256 messages logged. show logging buffer Synt ax Description None. Command Default s None.
Logging And Network Ma nagement Command Set Monitoring Network Events and S tatus 1 1-26 Matrix NSA Series C onfiguration Guide 1 1.2.2 Monitoring Network Events and S t atus Purpose T o display switch events and command history , to set the size of the history buffer , and to displa y and disconnect current user sessions.
Logging And Network Management Command Set Monitoring Network Events and Status Matrix NSA Series Configuration Guide 1 1-27 1 1.2.2.1 history Use this command to display the contents of the co mmand history buffer .
Logging And Network Ma nagement Command Set Monitoring Network Events and S tatus 1 1-28 Matrix NSA Series C onfiguration Guide 1 1.2.2.2 show history Use this command to display the size (in lines) of the history buf fer . show history Synt ax Description None.
Logging And Network Management Command Set Monitoring Network Events and Status Matrix NSA Series Configuration Guide 1 1-29 1 1.2.2.3 set history Use this command to set the size of the history buf fer . set history size [ default ] Synt ax Description Command Default s If default is not specified, the history setting will not be persistent.
Logging And Network Ma nagement Command Set Monitoring Network Events and S tatus 1 1-30 Matrix NSA Series C onfiguration Guide 1 1.2.2.4 show net stat Use this command to display statistics fo r the switch’ s active network connections.
Logging And Network Management Command Set Monitoring Network Events and Status Matrix NSA Series Configuration Guide 1 1-31 Ta b l e 1 1 - 4 provides an explanation of the comman d out put . T able 1 1-4 show net st at Output Det ails Output What It Displays.
Logging And Network Ma nagement Command Set Monitoring Network Events and S tatus 1 1-32 Matrix NSA Series C onfiguration Guide 1 1.2.2.5 ping Use this command to send ICMP echo-request packets to another node on the network from the switch CLI.
Logging And Network Management Command Set Monitoring Network Events and Status Matrix NSA Series Configuration Guide 1 1-33 This example shows how to ping IP address 134.141.89.29 with 10 packets: This example shows a continuous pi ng of IP address 134.
Logging And Network Ma nagement Command Set Monitoring Network Events and S tatus 1 1-34 Matrix NSA Series C onfiguration Guide 1 1.2.2.6 show users Use this command to display info rmation about the active console po rt or T elnet session(s) logged in to the switch.
Logging And Network Management Command Set Monitoring Network Events and Status Matrix NSA Series Configuration Guide 1 1-35 1 1.2.2.7 tell Use this command to send a m ess age to one or all users. tell { dest | all } message Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Monitoring Network Events and S tatus 1 1-36 Matrix NSA Series C onfiguration Guide 1 1.2.2.8 disconnect Use this command to close an active console port or T elnet session from the switch CLI. disconnect { ip-addr | console } Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring SMON Matrix NSA Series Configuration Guide 1 1-37 1 1.2.3 Configuring SMON Purpose T o configure SMON (Switched Network Monitoring) on the device. Commands Commands to configure SMON are listed below an d described in the associated section as shown.
Logging And Network Ma nagement Command Set Configuring SMON 1 1-38 Matrix NSA Series C onfiguration Guide 1 1.2.3.1 show smon priority Use this command to display SMON user priority statistics. SMON generates aggregated statistics for IEEE 802.1Q VLAN environments.
Logging And Network Management Command Set Configuring SMON Matrix NSA Series Configuration Guide 1 1-39 1 1.2.3.2 set smon priority Use this command to create, start, or stop priority-encoded SMON user statistics counting.
Logging And Network Ma nagement Command Set Configuring SMON 1 1-40 Matrix NSA Series C onfiguration Guide 1 1.2.3.3 clear smon priority Clears priority-encoded user stat istic s on one or more ports.
Logging And Network Management Command Set Configuring SMON Matrix NSA Series Configuration Guide 1 1-41 1 1.2.3.4 show smon vlan Use this command to display SMON (Switc hed Network Monitoring) VLAN statistics.
Logging And Network Ma nagement Command Set Configuring SMON 1 1-42 Matrix NSA Series C onfiguration Guide 1 1.2.3.5 set smon vlan Use this command to create, start, or stop SNMP VLAN-related statistics counting.
Logging And Network Management Command Set Configuring SMON Matrix NSA Series Configuration Guide 1 1-43 1 1.2.3.6 clear smon vlan Use this command to delete an SMON VL AN statistics counting configuration.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-44 Matrix NSA Series C onfiguration Guide 1 1.2.4 Configuring RMON RMON Monitoring Group Functions and Commands RMON (Remote Network Mo.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-45 Alarm Periodically gathers statistical samples from variables in the probe and compares them with previously configured thresholds. If the monitored variable crosses a threshold, an event is generated.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-46 Matrix NSA Series C onfiguration Guide Host To p N G enerates tables that describe hosts that top a list ordered by one of their statistics. These rate based statistics are samples of one of their base statistics over an interval specified by the management station.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-47 Filter Allows packets to be matched by a filter equation. These matc hed packets f orm a data stream or “channel” that may be captured or ma y generate events.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-48 Matrix NSA Series C onfiguration Guide 1 1.2.4.1 show rmon st at s Use this command to display RMON statistics measured for one or more ports.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-49 Ta b l e 1 1 - 6 provides an explanation of the comman d out put . T able 1 1-6 show rmon s tat s Output Det ails Output What It Displays... Port Port designatio n.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-50 Matrix NSA Series C onfiguration Guide Fragments Number of received frames that are not the minimum number of bytes in length, or re.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-51 1 1.2.4.2 set rmon st ats Use this command to configure an RMON statist ics entry . set rmon stats index port-string [ owner ] Synt ax Description Command Default s If owner is not specified, monitor will be applied.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-52 Matrix NSA Series C onfiguration Guide 1 1.2.4.3 clear rmon st ats Use this command to delete one or more RMON statistics entries. clear rmon stats { index-list | to-defaults } Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-53 1 1.2.4.4 show rmon history Use this command to display RMON histor y p roperties and statistics. The RMON history g roup records periodic statistical samples from a network.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-54 Matrix NSA Series C onfiguration Guide Matrix(rw)-> show rmon history fe.3.14 Port: fe.3.14 ------------------------------- -------- Index 1001 Status = 1 valid Owner = monitor Data Source = 1.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-55 1 1.2.4.5 set rmon history Use this command to configure an RMON history entry .
Logging And Network Ma nagement Command Set Configuring RMON 1 1-56 Matrix NSA Series C onfiguration Guide 1 1.2.4.6 clear rmon history Use this command to delete one or more RMON hi story entries or reset one or more entries to default values. For spec ific values, refer to Section 1 1.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-57 1 1.2.4.7 show rmon alarm Use this command to display RMON alarm entrie s. The RMON alarm group periodically takes statistical samples from RMON variables and co mpares them with pr eviously configured thresholds.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-58 Matrix NSA Series C onfiguration Guide T able 1 1-7 show rmon alarm Output Det ails Output What It Displays... Index Index number for this alarm entry . Owner T ext string identifying who configured this entry .
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-59 1 1.2.4.8 set rmon alarm properties Use this command to configure an RMON alarm en try , or to create a new alarm entry with an unused alarm index nu mber .
Logging And Network Ma nagement Command Set Configuring RMON 1 1-60 Matrix NSA Series C onfiguration Guide Command Default s • interval - 3600 seconds • type - absolute • startup - rising • rthresh - 0 • fthresh - 0 • revent - 0 • fevent - 0 • owner - monitor Command T ype Switch command.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-61 1 1.2.4.9 set rmon alarm status Use this command to enable an RMON alarm entry . An alarm is a notification that a statistical sample of a monitored variable has crossed a configured threshold.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-62 Matrix NSA Series C onfiguration Guide 1 1.2.4.10 clear rmon alarm Use this command to dele te an RMON alarm entry . clear rmon alarm index Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-63 1 1.2.4.1 1 show rmon event Use this command to display RMON event entry properties. show rmon ev en t [ index ] Synt ax Description Command Default s If index is not specified, information abou t all RMON entries will be displayed.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-64 Matrix NSA Series C onfiguration Guide Description T ext string d escription of this event. T ype Whether the event notification will be a log entry , and SNMP trap, both, or none. Community SNMP community name if messa ge type is set to trap.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-65 1 1.2.4.12 set rmon event properties Use this command to configure an RMON event entry , or to create a new event entry w ith an unused event index number .
Logging And Network Ma nagement Command Set Configuring RMON 1 1-66 Matrix NSA Series C onfiguration Guide Example This example shows how to create and enable an RMON event entry calle d “STP topolo.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-67 1 1.2.4.13 set rmon event status Use this command to enable an RMON event entry . An event entry describes the parameters of an RMON event that can be triggered.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-68 Matrix NSA Series C onfiguration Guide 1 1.2.4.14 clear rmon event Use this command to delete an RMON event entry and any associated log entries. clear rmon event index Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-69 1 1.2.4.15 show rmon host Use this command to display RMON properties and statistics associated with each host discovered on the network.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-70 Matrix NSA Series C onfiguration Guide Example This example shows how to display RMON host properties and statistics. A control entry displays first, followed by actual entries corresponding to the control entry .
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-71 1 1.2.4.16 set rmon host properties Use this command to configure an RMON host entry . set rmon host properties index port-string [ owner ] Synt ax Description Command Default s If owner is not specified, monitor will be applied.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-72 Matrix NSA Series C onfiguration Guide 1 1.2.4.17 set rmon host status Use this command to enable an RMON host entry . set rmon host status index enable Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-73 1 1.2.4.18 clear rmon host Use this command to dele te an RMON host entry . clear rmon host index Synt ax Description Command Default s None. Command T ype Switch command.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-74 Matrix NSA Series C onfiguration Guide 1 1.2.4.19 show rmon topN Use this command to d isplays RMON T opN proper ties and statistics. T opN monitoring prepares tables that describe the hosts topping a list ordered by one of their statistics.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-75 Ta b l e 1 1 - 9 provides an explanation of the comm and output. Properties are set usin g the set rmon topN properties command as describe d in Section 1 1.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-76 Matrix NSA Series C onfiguration Guide 1 1.2.4.20 set rmon topN properties Use this command to configur e an RMON topN entry (report).
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-77 Command Mode Read-W rite. Example This example shows how to configur e RMON T opN entry 1, for .
Logging And Network Ma nagement Command Set Configuring RMON 1 1-78 Matrix NSA Series C onfiguration Guide 1 1.2.4.21 set rmon topN status Use this command to enab le an RMON topN entry . set rmon topN status index enable | Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-79 1 1.2.4.22 clear rmon topN Use this command to delete an RMON T opN entry . clear rmon topN index Synt ax Description Command Default s None. Command T ype Switch command.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-80 Matrix NSA Series C onfiguration Guide 1 1.2.4.23 show rmon matrix Use this command to display RM ON matrix properties and statis tics. The RMON matrix stores statistics for conversations between sets of two addresses.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-81 T able 1 1-10 provides an explanation of the command output. Properties are set using the set rmon matrix properties command as described in Section 11.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-82 Matrix NSA Series C onfiguration Guide 1 1.2.4.24 set rmon matrix properties Use this command to configure an RMON matrix ent ry . set rmon matrix properties index port-string [ owner ] Synt ax Description Command Default s If owner is not specified, monitor will be applied.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-83 1 1.2.4.25 set rmon matrix status Use this command to enable an RMON matrix entry . set rmon matrix status index enable Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-84 Matrix NSA Series C onfiguration Guide 1 1.2.4.26 clear rmon matrix Use this command to delete an RMON matrix entry . clear rmon matrix index Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-85 1 1.2.4.27 show rmon channel Use this command to display RMON channel entries for one or more ports.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-86 Matrix NSA Series C onfiguration Guide 1 1.2.4.28 set rmon channel Use this command to configure an RMON channel entry .
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-87 Command Default s • If an action is not specified, packets wi ll be accepted on filter matches. • If not specified, control will be set to off .
Logging And Network Ma nagement Command Set Configuring RMON 1 1-88 Matrix NSA Series C onfiguration Guide 1 1.2.4.29 clear rmon channel Use this command to clear an RMON channel entry . clear rmon channel index Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-89 1 1.2.4.30 show rmon filter Use this command to display on e or more RMON filter entries.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-90 Matrix NSA Series C onfiguration Guide 1 1.2.4.31 set rmon filter Use this command to conf igure an RMON filter entry .
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-91 Command Mode Read-W rite. Example This example shows how to create RMON filter 1 and apply it t.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-92 Matrix NSA Series C onfiguration Guide 1 1.2.4.32 clear rmon filter Use this command to clear an RMON filter entry . clear rmon filter { index index | channel channel } Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-93 1 1.2.4.33 show rmon capture Use this command to display RMON capture en tries and associated buffer control entries.
Logging And Network Ma nagement Command Set Configuring RMON 1 1-94 Matrix NSA Series C onfiguration Guide Example This example shows how to display RMON captu re entries and associated buffer entries: Matrix(rw)-> show rmon capture Buf.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-95 1 1.2.4.34 set rmon capture Use this command to configure an RMON capture entr y , or to enable or disable an existing entry .
Logging And Network Ma nagement Command Set Configuring RMON 1 1-96 Matrix NSA Series C onfiguration Guide Command T ype Switch command. Command Mode Read-W rite.
Logging And Network Management Command Set Configuring RMON Matrix NSA Series Configuration Guide 1 1-97 1 1.2.4.35 clear rmon capture Use this command to clears an RMON capture entry . clear rmon capture index Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Managing Switch Network Addresses and Routes 1 1-98 Matrix NSA Series C onfiguration Guide 1 1.2.5 Managing Switch Ne twork Addresses and Routes Purpose T o.
Logging And Network Management Command Set Managing Switch Network Addresses and Routes Matrix NSA Series Configuration Guide 1 1-99 1 1.2.5.1 show arp Use this command to displa y the switch’ s ARP table. show arp Synt ax Description None. Command Default s None.
Logging And Network Ma nagement Command Set Managing Switch Network Addresses and Routes 1 1-100 Matrix NSA Series Configuration Guide 1 1.2.5.2 set arp Use this command to ad d mapping entries to the switch’ s ARP table.
Logging And Network Management Command Set Managing Switch Network Addresses and Routes Matrix NSA Series Co nfiguration Guide 1 1 -101 1 1.2.5.3 clear arp Use this command to delete a specific entry or all entries from the switch’ s ARP table. clear arp { ip | all } Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Managing Switch Network Addresses and Routes 1 1-102 Matrix NSA Series Configuration Guide 1 1.2.5.4 show rad Use this command to display the status of the RAD (Runtime Address Discovery) protocol o n the switch.
Logging And Network Management Command Set Managing Switch Network Addresses and Routes Matrix NSA Series Co nfiguration Guide 1 1 -103 1 1.2.5.5 set rad Use this command to enable or disable RAD (R untime Address Discovery) protocol. The Matrix Series device uses BOOTP/DHCP to obtain an IP address if one hasn’t been configured.
Logging And Network Ma nagement Command Set Managing Switch Network Addresses and Routes 1 1-104 Matrix NSA Series Configuration Guide 1 1.2.5.6 show ip route Use this command to display the switch’ s IP routing table entries. show ip route Synt ax Description None.
Logging And Network Management Command Set Managing Switch Network Addresses and Routes Matrix NSA Series Co nfiguration Guide 1 1 -105 Flags Route status.
Logging And Network Ma nagement Command Set Managing Switch Network Addresses and Routes 1 1-106 Matrix NSA Series Configuration Guide 1 1.2.5.7 traceroute Use this command to d isplay a hop-by-hop path through an IP network from the device to a specific destination host.
Logging And Network Management Command Set Managing Switch Network Addresses and Routes Matrix NSA Series Co nfiguration Guide 1 1 -107 Command Default s • If not specified, waittime will be set to 5 sec onds. • If not specified, first-tt l will be set to 1 second.
Logging And Network Ma nagement Command Set Managing Switch Network Addresses and Routes 1 1-108 Matrix NSA Series Configuration Guide Example This example shows how to use traceroute to disp lay a round trip path to host 192.167 .252.17. In this case, hop 1 is the Matrix Series switch, hop 2 is 14.
Logging And Network Management Command Set Managing Switch Network Addresses and Routes Matrix NSA Series Co nfiguration Guide 1 1 -109 1 1.2.5.8 set ip route Use this command to add a route to the switch’ s IP routing table. set ip route { destination | default} ga teway Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Managing Switch Network Addresses and Routes 1 1-1 10 Matrix NSA Seri es Configu ration Guide 1 1.2.5.9 clear ip route Use this command to delete switch IP routing table entries. clear ip route destination | default Synt ax Description Command Default s None.
Logging And Network Management Command Set Managing Switch Network Addresses and Routes Matrix NSA Series Configurati on Guide 1 1-1 1 1 1 1.2.5.10 show port mac Use this command to display the MAC address(es ) for one or more ports. These are port MAC addresses programmed into the device during manu facturing.
Logging And Network Ma nagement Command Set Managing Switch Network Addresses and Routes 1 1-1 12 Matrix NSA Seri es Configu ration Guide 1 1.2.5.1 1 show mac Use this command to display th e timeout period for aging learned MAC ad dresses, and to show MAC addresses in the switc h’ s filtering database.
Logging And Network Management Command Set Managing Switch Network Addresses and Routes Matrix NSA Series Configuration Guide 1 1-1 13 Examples This example shows how to displa y the MAC address timeo.
Logging And Network Ma nagement Command Set Managing Switch Network Addresses and Routes 1 1-1 14 Matrix NSA Seri es Configu ration Guide 1 1.2.5.12 set mac Use this command to set the timeout period .
Logging And Network Management Command Set Managing Switch Network Addresses and Routes Matrix NSA Series Configuration Guide 1 1-1 15 1 1.2.5.13 clear mac Use this command to reset the timeout period for aging learned MAC entries to the default value of 300 seconds, or to clear MAC addresses out of the filtering database(s).
Logging And Network Ma nagement Command Set Managing Switch Network Addresses and Routes 1 1-1 16 Matrix NSA Seri es Configu ration Guide This example shows how to clear all the MAC addresses associated with port fe.1.3: Matrix(rw)-> clear mac port-string fe.
Logging And Network Management Command Set Managing Switch Network Addresses and Routes Matrix NSA Series Configuration Guide 1 1-1 17 1 1.2.5.14 show newaddrtraps Use this command to display the status of MAC address traps on one or more ports.
Logging And Network Ma nagement Command Set Managing Switch Network Addresses and Routes 1 1-1 18 Matrix NSA Seri es Configu ration Guide 1 1.2.5.15 set newaddrtraps Use this command to enable or disable SNMP trap messaging, globally or on one or more ports, when new source MAC addresses are detected.
Logging And Network Management Command Set Managing Switch Network Addresses and Routes Matrix NSA Series Configuration Guide 1 1-1 19 1 1.2.5.16 show movedaddrtrap Use this command to display th e status of moved MAC address traps on one or more ports.
Logging And Network Ma nagement Command Set Managing Switch Network Addresses and Routes 1 1-120 Matrix NSA Series Configuration Guide 1 1.2.5.17 set movedaddrtrap Use this command to enable or disable SNMP trap messaging, globally or on one or more ports, when moved source MAC addresses are dete cted.
Logging And Network Management Command Set Configuring Simple Network Time Protocol (SNTP) Matrix NSA Series Co nfiguration Guide 1 1 -121 1 1.2.6 Configuring Simple Ne twork T ime Protocol (SNTP) Purpose T o configure the Simple Network T ime Protocol (S NTP), which synchronizes device clocks in a network.
Logging And Network Ma nagement Command Set Configuring Simple Network Time Protocol (SNTP) 1 1-122 Matrix NSA Series Configuration Guide 1 1.2.6.1 show sntp Use this command to disp lay SNTP client settings. show sntp Synt ax Description None. Command Default s None.
Logging And Network Management Command Set Configuring Simple Network Time Protocol (SNTP) Matrix NSA Series Co nfiguration Guide 1 1 -123 T able 1 1-14 show sntp Output Det ails Output What It Displays... SNTP V e rsion SNTP version number . Current T ime Current time on the system clock.
Logging And Network Ma nagement Command Set Configuring Simple Network Time Protocol (SNTP) 1 1-124 Matrix NSA Series Configuration Guide 1 1.2.6.2 set sntp client Use this command to set the SNTP operation mode. set sntp client { broadcast | unicast | disable } Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring Simple Network Time Protocol (SNTP) Matrix NSA Series Co nfiguration Guide 1 1 -125 1 1.2.6.3 clear sntp client Use this command to clear the SNTP client’ s operational mode. clear sntp client Synt ax Description None.
Logging And Network Ma nagement Command Set Configuring Simple Network Time Protocol (SNTP) 1 1-126 Matrix NSA Series Configuration Guide 1 1.2.6.4 set sntp server Use this command to add a server from which the SN TP client will retrieve the current time when operating in unicast mode.
Logging And Network Management Command Set Configuring Simple Network Time Protocol (SNTP) Matrix NSA Series Co nfiguration Guide 1 1 -127 1 1.2.6.5 clear sntp server Use this command to remove one or all servers from the SNTP server list. clear sntp server { ip-addr ess | all } Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Configuring Simple Network Time Protocol (SNTP) 1 1-128 Matrix NSA Series Configuration Guide 1 1.2.6.6 set sntp broadcast delay Use this command to set the ro und trip delay , in microseconds, for SNTP broadcast frames.
Logging And Network Management Command Set Configuring Simple Network Time Protocol (SNTP) Matrix NSA Series Co nfiguration Guide 1 1 -129 1 1.2.6.7 clear sntp broadcast delay Use this command to clear the round tr ip delay time for SNTP broadcast frames.
Logging And Network Ma nagement Command Set Configuring Simple Network Time Protocol (SNTP) 1 1-130 Matrix NSA Series Configuration Guide 1 1.2.6.8 set sntp poll-interval Use this command to set the poll in terval between SNTP unicast requests. set sntp poll-interval interval Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring Simple Network Time Protocol (SNTP) Matrix NSA Series Co nfiguration Guide 1 1 -131 1 1.2.6.9 clear sntp poll-interval Use this command to clear the poll in terval between unicast SNTP requests. clear sntp poll-interval Synt ax Description None.
Logging And Network Ma nagement Command Set Configuring Simple Network Time Protocol (SNTP) 1 1-132 Matrix NSA Series Configuration Guide 1 1.2.6.10 set sntp poll-retry Use this command to set the number of poll retries to a unicast SNTP server . set sntp poll-retry re t r y Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring Simple Network Time Protocol (SNTP) Matrix NSA Series Co nfiguration Guide 1 1 -133 1 1.2.6.1 1 clear sntp poll-retry Use this command to clear the number of poll retries to a unicast SNTP server .
Logging And Network Ma nagement Command Set Configuring Simple Network Time Protocol (SNTP) 1 1-134 Matrix NSA Series Configuration Guide 1 1.2.6.12 set sntp poll-timeout Use this command to set the po ll time out (in seconds) for a response to a unicast SNTP request.
Logging And Network Management Command Set Configuring Simple Network Time Protocol (SNTP) Matrix NSA Series Co nfiguration Guide 1 1 -135 1 1.2.6.13 clear sntp poll-timeout Use this command to clear the SNTP poll timeout. clear sntp poll-timeout Synt ax Description None.
Logging And Network Ma nagement Command Set Configuring Simple Network Time Protocol (SNTP) 1 1-136 Matrix NSA Series Configuration Guide 1 1.2.6.14 show timezone Use this command to disp lay SNTP time zone settings. show timezone Synt ax Description None.
Logging And Network Management Command Set Configuring Simple Network Time Protocol (SNTP) Matrix NSA Series Co nfiguration Guide 1 1 -137 1 1.2.6.15 set timezone Use this command to set the SNTP time zone name and the hours and minutes it is of fset from Coordinated Universal T ime (UTC).
Logging And Network Ma nagement Command Set Configuring Simple Network Time Protocol (SNTP) 1 1-138 Matrix NSA Series Configuration Guide 1 1.2.6.16 clear timezone Use this command to remove SN TP time zone adjustment values. clear timezone Synt ax Description None.
Logging And Network Management Command Set Configuring Node Aliases Matrix NSA Series Co nfiguration Guide 1 1 -139 1 1.2.7 Configuring Node Aliases Purpose T o review , configure, disable and re-enable node (port) alias functionality , which determines what network protocols are running on one or more p orts.
Logging And Network Ma nagement Command Set Configuring Node Alia ses 1 1-140 Matrix NSA Series Configuration Guide 1 1.2.7.1 show nodealias Use this command to d isplay node alias properties for one or more ports.
Logging And Network Management Command Set Configuring Node Aliases Matrix NSA Series Co nfiguration Guide 1 1 -141 Vlan ID VLAN ID associated with this a lias. MAC Address MAC address associa ted with this alias. Protocol Networking protocol running on this po rt.
Logging And Network Ma nagement Command Set Configuring Node Alia ses 1 1-142 Matrix NSA Series Configuration Guide 1 1.2.7.2 show nodealias mac Use this command to display node alias entries based on MAC address and protocol.
Logging And Network Management Command Set Configuring Node Aliases Matrix NSA Series Co nfiguration Guide 1 1 -143 Command Default s • If protocol is not specified, node alias entries for all protocols will be displayed. • If port-string is not specified, node alias entr ies will be displayed for all ports.
Logging And Network Ma nagement Command Set Configuring Node Alia ses 1 1-144 Matrix NSA Series Configuration Guide 1 1.2.7.3 show nodealias protocol Use this command to display node alias entries based on protocol an d protocol address.
Logging And Network Management Command Set Configuring Node Aliases Matrix NSA Series Co nfiguration Guide 1 1 -145 Example This example shows how to display node alias entr ies for IP traffic on ge .3.16. Refer back to T able 1 1-15 for a description of the command output.
Logging And Network Ma nagement Command Set Configuring Node Alia ses 1 1-146 Matrix NSA Series Configuration Guide 1 1.2.7.4 show nodealias config Use this command to display node alias conf iguration settings on one or more ports.
Logging And Network Management Command Set Configuring Node Aliases Matrix NSA Series Co nfiguration Guide 1 1 -147 T able 1 1-16 show nodealias con fig Output Details Output What It Displays... Port Number Port de signation. Max Entries Maximum number of a lia s entries configured for this port.
Logging And Network Ma nagement Command Set Configuring Node Alia ses 1 1-148 Matrix NSA Series Configuration Guide 1 1.2.7.5 set nodealias Use this command to enable or disable a node a lias agent on one or more ports.
Logging And Network Management Command Set Configuring Node Aliases Matrix NSA Series Co nfiguration Guide 1 1 -149 1 1.2.7.6 set nodea lias maxentries Use this command to set the maximum number of node alias en tries allowed for one or more ports. set nodealias maxentries val port-string Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Configuring Node Alia ses 1 1-150 Matrix NSA Series Configuration Guide 1 1.2.7.7 clear nodealias Use this command to remove one or more node alias entries. clear nodealias { port-string port-string | alias-id alias-id } Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring Node Aliases Matrix NSA Series Co nfiguration Guide 1 1 -151 1 1.2.7.8 clear nodealias config Use this command to reset node alias state to enabled and clear the maximum entries value. clear nodealias config port-string Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Configuring NetFlow 1 1-152 Matrix NSA Series Configuration Guide 1 1.2.8 Configuring NetFlow NetFlow is a protocol developed for collecting IP traffic information.
Logging And Network Management Command Set Configuring NetFlow Matrix NSA Series Co nfiguration Guide 1 1 -153 V ersion Support The Matrix DFE firmware supports NetFlow V ersion 5 and V ersion 9. For more information about V ersion 9 data export format, refer to RFC 3954, “Cisco Systems NetFlow Services Export V ersion 9.
Logging And Network Ma nagement Command Set Configuring NetFlow 1 1-154 Matrix NSA Series Configuration Guide more often than once per second, as a minimum. For more information about setting the refresh rate, see the Usage discussion in Section 1 1.2.
Logging And Network Management Command Set Configuring NetFlow Matrix NSA Series Co nfiguration Guide 1 1 -155 1 1.2.8.1 show net flow Use this command to displa y NetFlow configur ation information and/or statistics.
Logging And Network Ma nagement Command Set Configuring NetFlow 1 1-156 Matrix NSA Series Configuration Guide Disabled Ports: ----------------- lag.0.1-48 ge.
Logging And Network Management Command Set Configuring NetFlow Matrix NSA Series Co nfiguration Guide 1 1 -157 1 1.2.8.2 set net flow cache Use this command to enab le (create) or disable (free up) a NetFlow cache on each DFE blade in the Matrix system.
Logging And Network Ma nagement Command Set Configuring NetFlow 1 1-158 Matrix NSA Series Configuration Guide 1 1.2.8.3 clear net flow cache Use this command to remove, or free up, the Ne tFlow caches on each DFE blade in the Matrix system. When this command is executed, NetF low is effectively disabled on the system.
Logging And Network Management Command Set Configuring NetFlow Matrix NSA Series Co nfiguration Guide 1 1 -159 1 1.2.8.4 set net flow export-destination Use this command to configure the NetFlow collector destination. By default, no collector address is configured.
Logging And Network Ma nagement Command Set Configuring NetFlow 1 1-160 Matrix NSA Series Configuration Guide 1 1.2.8.5 clear net flo w export-destination Use this command to clear the NetFlow collector IP address.
Logging And Network Management Command Set Configuring NetFlow Matrix NSA Series Co nfiguration Guide 1 1 -161 1 1.2.8.6 set net flow export-interval Use this command to configure the NetFlow export interval. set netflow export-interval interval Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Configuring NetFlow 1 1-162 Matrix NSA Series Configuration Guide 1 1.2.8.7 clear net flow export-in terval Use this command to clear NetFlow export interval to its default of 30 minutes. clear netflow export-interval Synt ax Description None.
Logging And Network Management Command Set Configuring NetFlow Matrix NSA Series Co nfiguration Guide 1 1 -163 1 1.2.8.8 set net flow port Use this command to enable NetFlow collection on a port. set netflow port port-string { enable | disabl e } Synt ax Description Command Default s None.
Logging And Network Ma nagement Command Set Configuring NetFlow 1 1-164 Matrix NSA Series Configuration Guide 1 1.2.8.9 clear net flow port Use this command to return a port to the default NetFlow collect ion state of disabled. clear netflow port port-string Synt ax Description Command Default s None.
Logging And Network Management Command Set Configuring NetFlow Matrix NSA Series Co nfiguration Guide 1 1 -165 1 1.2.8.10 set net flow export-version Use this command to set the NetFlow flow reco rd format used to ex port data. Refer to V ersion Support on page 153 for more information about Ne tFlow version support.
Logging And Network Ma nagement Command Set Configuring NetFlow 1 1-166 Matrix NSA Series Configuration Guide 1 1.2.8.1 1 clear net flow export-version Use this command to return the NetFlow flow record format used to export data to the default of V ersion 5.
Logging And Network Management Command Set Configuring NetFlow Matrix NSA Series Co nfiguration Guide 1 1 -167 1 1.2.8.12 set net flow template Use this command to configure th e NetFlow V ersion 9 template refresh rate and/or timeout values.
Logging And Network Ma nagement Command Set Configuring NetFlow 1 1-168 Matrix NSA Series Configuration Guide The refresh rate defines the maximum dela y a new or restarted NetFlow collector would experience until it learns the format of the data records being forwarded (from the template referenced by the data records).
Logging And Network Management Command Set Configuring NetFlow Matrix NSA Series Co nfiguration Guide 1 1 -169 1 1.2.8.13 clear netflow template Use this command to reset the V ersion 9 template re fresh rate and/or timeout va lues to their default values.
Logging And Network Ma nagement Command Set Configuring NetFlow 1 1-170 Matrix NSA Series Configuration Guide.
Matrix NSA Series Configuration Guide 12-1 12 IP Configuration This chapter describes the Internet Protocol (IP) configuration set of commands and how to use them. 12.1 PROCESS OVERVIEW: INTERNET PROTOCOL (IP) CONFIGURATION Use the following steps as a guide to configuring IP on the device: 1.
IP Configuration Command Set Configuring Routing Interface Settin gs 12-2 Matrix N SA Series Configuration Guide 12.2 IP CONFIGURATION COMMAND SET 12.2.
IP Configuration Command Set Configuring Routing Interface Settings Matrix NSA Series Configuration Guide 12-3 Purpose T o enable routing interface configuratio n mode on the device, to create VLAN or.
IP Configuration Command Set Configuring Routing Interface Settin gs 12-4 Matrix N SA Series Configuration Guide 12.2.1.1 show interface Use this command to display in formation about one or more in terfaces (VLANs or loopbacks) configured on the router .
IP Configuration Command Set Configuring Routing Interface Settings Matrix NSA Series Configuration Guide 12-5 Example This example shows how to display information for all interfaces configured on the router . In this case, one loopback interface has been configured for routing.
IP Configuration Command Set Configuring Routing Interface Settin gs 12-6 Matrix N SA Series Configuration Guide 12.2.1.2 interface Use this command to configure interfaces for IP routing.
IP Configuration Command Set Configuring Routing Interface Settings Matrix NSA Series Configuration Guide 12-7 12.2.1.3 ip ecm-for warding-algorithm Use this command to enable ECM (Equal Cost Multipath) for forwarding IP packets on routing interfaces.
IP Configuration Command Set Configuring Routing Interface Settin gs 12-8 Matrix N SA Series Configuration Guide 12.2.1.4 show ip interf ace Use this command to display in formation, including administra tive status, IP address, MTU (Maximum T ransmission U nit) size and bandwi dth, and ACL co nfigurations, for interfaces configured for IP .
IP Configuration Command Set Configuring Routing Interface Settings Matrix NSA Series Configuration Guide 12-9 T able 12-2 provides an explan ation of the command output. T able 12-2 show ip interface Ou tput Details Output What It Displays... Vlan | Lpbk | Lo N Whether the interface is admini stratively and operationally up or down.
IP Configuration Command Set Configuring Routing Interface Settin gs 12-10 M atrix NSA Series Configurati on Guide 12.2.1.5 ip address Use this command to set, remove, or disable a pr imary or secondary IP address for an interface.
IP Configuration Command Set Configuring Routing Interface Settings Matrix NSA Series Configuration Guide 12-1 1 12.2.1.6 no shutdown Use this command to ena ble an in terface for IP routing and to a llow the interface to automatically be enabled at device st artup .
IP Configuration Command Set Managing Router Configu ration Files 12-12 M atrix NSA Series Configurati on Guide 12.2.2 Managing Router Configuration Files Each Matrix Series device provides a single conf iguration interface which allows you to perform both switch and router configuration with th e s ame command set.
IP Configuration Command Set Managing Router Configu ration Files Matrix NSA Series Configu ration Guide 12-13 12.2.2.1 show ru nning-config Use this command to display th e non-d efault, user-supplied commands entered while co nfiguring the device. show running-config Synt ax Description None.
IP Configuration Command Set Managing Router Configu ration Files 12-14 M atrix NSA Series Configurati on Guide 12.2.2.2 write Use this command to save or delete the router ru nning confi guration, or to display it to output devices. write [ erase | file [ filename config-file ] | terminal ] Synt ax Description Command T ype Router command.
IP Configuration Command Set Managing Router Configu ration Files Matrix NSA Series Configu ration Guide 12-15 Example This example shows how to display the rout er-s pe ci fic co nfigura tion to the terminal: Matrix>Router1# write terminal Enable Config t interface vlan 1 iP Address 182.
IP Configuration Command Set Managing Router Configu ration Files 12-16 M atrix NSA Series Configurati on Guide 12.2.2.3 no ip routing Use this command to disable IP routing on the device and rem ove the routing configuration. By default, IP routing is enab led when interfaces are config ured for it as described in Section 12.
IP Configuration Command Set Performing a Basic Rou ter Configuration Matrix NSA Series Configu ration Guide 12-17 12.2.3 Performing a Basi c Router Configuration 12.
IP Configuration Command Set Performing a Basic Router Configuration 12-18 M atrix NSA Series Configurati on Guide 12.2.3.3 Configuring the Router Y ou can configure the rou ter usin g either of the following methods.
IP Configuration Command Set Reviewing and Configuring th e ARP T able Matrix NSA Series Configu ration Guide 12-19 12.2.4 Reviewing and Confi guring the ARP T able Purpose T o review and configure the routin g ARP table, to enable proxy ARP on an interface, and to set a MAC address on an interface.
IP Configuration Command Set Reviewing and Con figuring the ARP T able 12-20 M atrix NSA Series Configurati on Guide 12.2.4.1 show ip arp Use this command to display entr ies in the ARP (Address Resolution Protocol) table. ARP converts an IP address into a physical address.
IP Configuration Command Set Reviewing and Configuring th e ARP T able Matrix NSA Series Configu ration Guide 12-21 Example This example shows how to use the show ip arp command: T able 12-3 provides an explan ation of the command output.
IP Configuration Command Set Reviewing and Con figuring the ARP T able 12-22 M atrix NSA Series Configurati on Guide 12.2.4.2 arp Use this command to add or remo ve permanent (static) ARP table en tries. Up to 1,000 static ARP entries are supported per Matrix Series routing mod ule or standalone device.
IP Configuration Command Set Reviewing and Configuring th e ARP T able Matrix NSA Series Configu ration Guide 12-23 12.2.4.3 ip gratuitous-arp Use this command to override the normal ARP updating process, that occurs by default.
IP Configuration Command Set Reviewing and Con figuring the ARP T able 12-24 M atrix NSA Series Configurati on Guide 12.2.4.4 ip gratuitous-arp-learning Use this command to allow an interface to learn new ARP bindings using gratuitous ARP . This command will be in effect if the i p gratuitous-arp ignor e command ( Section 12.
IP Configuration Command Set Reviewing and Configuring th e ARP T able Matrix NSA Series Configu ration Guide 12-25 12.2.4.5 ip proxy-arp Use this command to enable proxy ARP on an interface. This varia tion of the ARP protocol allows the routing modu le to send an ARP response on be half of an end node to the requ esting host.
IP Configuration Command Set Reviewing and Con figuring the ARP T able 12-26 M atrix NSA Series Configurati on Guide 12.2.4.6 ip mac-address Use this command to set a MAC address on an interface.
IP Configuration Command Set Reviewing and Configuring th e ARP T able Matrix NSA Series Configu ration Guide 12-27 12.2.4.7 arp timeout Use this command to set the dura tion (in seconds) for entr ies to stay in the ARP table before expiring. The device can support up to 2000 outstandin g unresolved ARP entries.
IP Configuration Command Set Reviewing and Con figuring the ARP T able 12-28 M atrix NSA Series Configurati on Guide 12.2.4.8 clear arp-cache Use this command to delete all nonstatic (dynamic) entries from the ARP table. clear arp-cache Synt ax Description None.
IP Configuration Command Set Configuring Broadcast Settings Matrix NSA Series Configu ration Guide 12-29 12.2.5 Configuring Broadcast Settings Purpose T o configure IP broadcast settings.
IP Configuration Command Set Configuring Broadcast Settings 12-30 M atrix NSA Series Configurati on Guide 12.2.5.1 ip directed-broadcast Use this command to enable or disable IP directed broadcasts on an interface. ip directed-broadcast Synt ax Description None.
IP Configuration Command Set Configuring Broadcast Settings Matrix NSA Series Configu ration Guide 12-31 12.2.5.2 ip forward-protocol Use this command to enable UDP broadcast fo rwarding and specify which protocols will be forwarded. This comm and wo rks in conjunction with the ip helper-address command to configure UDP broadcast forwarding.
IP Configuration Command Set Configuring Broadcast Settings 12-32 M atrix NSA Series Configurati on Guide Command Default s If port is not specified, default forwarding services will be performed as listed above.
IP Configuration Command Set Configuring Broadcast Settings Matrix NSA Series Configu ration Guide 12-33 12.2.5.3 ip helper-address Use this command to enable DHCP/BOOTP relay and the forwarding of local UDP broadcasts specifying a new destination address.
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes 12-34 M atrix NSA Series Configurati on Guide 12.2.6 Reviewing IP T raffi c and Configuring Routes Purpose T o review IP proto.
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes Matrix NSA Series Configu ration Guide 12-35 12.2.6.1 show ip protocols Use this command to display information about IP protocols running on the device. show ip protocols Synt ax Description None.
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes 12-36 M atrix NSA Series Configurati on Guide Example This example shows how t o display IP protocol information. In this case, the routing protocol is RIP (Routing Information Protocol).
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes Matrix NSA Series Configu ration Guide 12-37 12.2.6.2 show ip traffic Use this command to display IP traf fic statistics. show ip traffic [ softpath ] Synt ax Description Command T ype Router command.
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes 12-38 M atrix NSA Series Configurati on Guide Example This example shows how to display IP traffic statistics: Matrix>Route.
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes Matrix NSA Series Configu ration Guide 12-39 12.2.6.3 clear ip stat s Use this command to clear all IP traffic co unters (IP , ICMP , UDP , TCP , IGMP , and ARP). clear ip stats Synt ax Description None.
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes 12-40 M atrix NSA Series Configurati on Guide 12.2.6.4 show ip route Use this command to display information about IP routes.
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes Matrix NSA Series Configu ration Guide 12-41 distributed to every module for use by the router's distributed forwarding engin e on the ingress module as frames are received.
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes 12-42 M atrix NSA Series Configurati on Guide 12.2.6.5 ip route Use this command to add or remove a static IP route.
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes Matrix NSA Series Configu ration Guide 12-43 Examples This example shows how to set IP address 10.1.2.3 as the next hop gatewa y to destination address 10.0.0.0. The route is assig ned a tag of 1: This example shows how to set IP address 10.
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes 12-44 M atrix NSA Series Configurati on Guide 12.2.6.6 ip icmp Use this command to re-enable th e Internet Control Message Protocol (ICMP), allowing a router to reply to IP ping requ ests.
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes Matrix NSA Series Configu ration Guide 12-45 12.2.6.7 ping Use this command to test routing network connec tivity by sending IP ping requests. The ping utility (IP ping only) transmits a maximum of five echo requ ests, with a packet size of 100.
IP Configuration Command Set Reviewing IP T raffic and Configuring Routes 12-46 M atrix NSA Series Configurati on Guide 12.2.6.8 traceroute Use this command to d isplay a hop-by-hop path through an IP network from the device to a specific destination host.
IP Configuration Command Set Configuring PIM Matrix NSA Series Configu ration Guide 12-47 12.2.7 Configuring PIM Purpose T o review and configure Protoc ol Independent Multicast (PIM). Commands The commands used to review and configure PIM are listed below and described in the associated section as shown: • ip pim sparse mode ( Section 12.
IP Configuration Command Set Configuring PIM 12-48 M atrix NSA Series Configurati on Guide 12.2.7.1 ip pim sparse mode Use this command to enable Prot ocol Independent Multicast (PIM) Sparse Mode (SM) on a routing interface. ip pim sparse-mode Synt ax Description None.
IP Configuration Command Set Configuring PIM Matrix NSA Series Configu ration Guide 12-49 12.2.7.2 ip pim bsr-candidate Use this command to enable th e router to a nnounce its candid acy as a BootStrap Router (BSR).
IP Configuration Command Set Configuring PIM 12-50 M atrix NSA Series Configurati on Guide Example This example sets the hash mask length to 30 and DR priority to 77 on VLAN 1: Matrix>Router1(confi.
IP Configuration Command Set Configuring PIM Matrix NSA Series Configu ration Guide 12-51 12.2.7.3 ip pim d r-priority Use this command to set the priority for which a rout er will be elected as the designated router (DR).
IP Configuration Command Set Configuring PIM 12-52 M atrix NSA Series Configurati on Guide 12.2.7.4 ip pim rp-address Use this command to set a static rend ezvous point (RP) for a multicast group.
IP Configuration Command Set Configuring PIM Matrix NSA Series Configu ration Guide 12-53 12.2.7.5 ip pim rp-candidate Use this command to enable the router to advertise itself as a PI M candidate rendezvous point (RP) to the BSR. Only one RP candid ate can be configured per routing module or standalone device.
IP Configuration Command Set Configuring PIM 12-54 M atrix NSA Series Configurati on Guide 12.2.7.6 show ip pim b sr Use this command to display Boot Strap Router (BSR) information. show ip pim bs r Synt ax Description None. Command T ype Router command.
IP Configuration Command Set Configuring PIM Matrix NSA Series Configu ration Guide 12-55 BSR Hash Mask Length Length of a mask (32 bits maximu m) that is to be added with the group ad dress before the hash function is called. This value is configured by the ip pim bsr-candidate command.
IP Configuration Command Set Configuring PIM 12-56 M atrix NSA Series Configurati on Guide 12.2.7.7 show ip pim i nterface Use this command to disp lay information about PIM interfaces that are c urre ntly up (not shutdown). show ip pim interface [ interface ] Synt ax Description Command T ype Router command.
IP Configuration Command Set Configuring PIM Matrix NSA Series Configu ration Guide 12-57 Nbr -Count T otal number of PIM neighb ors on the interface, discovered by receiving PIM hello messages from other PIM routers on the interface. Query-Intvl Interval between Hello messages.
IP Configuration Command Set Configuring PIM 12-58 M atrix NSA Series Configurati on Guide 12.2.7.8 show ip pim neighbor Use this command to display inform ation about discovered PIM neighbors. show ip pim ne ighbor [ interface ] Synt ax Description Command T ype Router command.
IP Configuration Command Set Configuring PIM Matrix NSA Series Configu ration Guide 12-59 Expires Interval in hours, minutes, and seconds until the entry will be removed from the IP multicast routing table. Mode Mode in which the interface is operating.
IP Configuration Command Set Configuring PIM 12-60 M atrix NSA Series Configurati on Guide 12.2.7.9 show ip pim rp Use this command to d isplay the active rendezvous points (RPs) that are cached with associated multicast routing entries.
IP Configuration Command Set Configuring PIM Matrix NSA Series Configu ration Guide 12-61 T able 12-7 provides an explan ation of the command output. T able 12-7 show ip pim rp Output Det ails Output What It Displays... Group(s) Address of the multicast group(s) about which to display RP data.
IP Configuration Command Set Configuring PIM 12-62 M atrix NSA Series Configurati on Guide 12.2.7.10 show ip pim rp-hash Use this command to displa y the rendezvous point (RP) that is being selected for a specified group. show ip pim rp-hash gr oup-ad dr ess Synt ax Description Command T ype Router command.
IP Configuration Command Set Configuring PIM Matrix NSA Series Configu ration Guide 12-63 12.2.7.1 1 show ip mroute Use this command to display the IP multicast ro uting table. This table shows how a multicast routing protocol, such as PIM and DVMRP , will forw ard a multicast packet.
IP Configuration Command Set Configuring PIM 12-64 M atrix NSA Series Configurati on Guide Example This example shows a portion of the IP multicast ro uting table display . In this case, it shows there are nine source PIM sparse mode (PIMSM) multicast networks.
IP Configuration Command Set Configuring PIM Matrix NSA Series Configu ration Guide 12-65 12.2.7.12 sho w ip mforward Use this command to display the IP multicast forw arding table. This table shows what multicast routes have actually b e en pr ogrammed into th e Matrix hardware.
IP Configuration Command Set Configuring PIM 12-66 M atrix NSA Series Configurati on Guide 12.2.7.13 show ip rpf Use this command to display the reverse path of an address in the unicast table. show ip rfp Synt ax Description None. Command T ype Router command.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-67 12.2.8 Configuring Load Sharing Network Address T ranslation (LSNA T) About LSNA T As defined in RFC 2391, LSNA T supports networ k reliability and availab ility by enabling high traffic servers to load balance.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-68 M atrix NSA Series Configurati on Guide • The virtual port used by the virt ual server (configured with the virtual co mmand, Section 12.2.8.15 ) should match the real port used by the real server (configured with the rea l command, Section 12.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-69 • Sticky persistence — a binding is determined by matching the source and destination IP addresses only .
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-70 M atrix NSA Series Configurati on Guide If you also want to provide direct client access to real servers configured as part of a server farm group, there are two mechanisms that can provide direct client access .
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-71 • (Optional) Specify a load ba lancing algorithm. predictor ( Section 12.2.8.5 ) • (Optional) Configure this server farm to use sticky session persistence.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-72 M atrix NSA Series Configurati on Guide • (Optional) Allow specific clients direct access to a real server without using LSNA T . allow accessservers ( Section 12.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-73 12.2.8.1 show ip slb serverfarms Use this command to display server lo ad balancing server farm information.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-74 M atrix NSA Series Configurati on Guide 12.2.8.2 ip slb f tpctrlport Use this command to specify an FTP control port for load balancing functio nality. By default, this is port 21.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-75 12.2.8.3 ip slb serverfarm Use this command to identify an LSNAT server farm and enable server load balancing (SLB) server farm configuration mode.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-76 M atrix NSA Series Configurati on Guide 12.2.8.4 real Use this command to add a real LSNA T server to a server farm and to enable LSNA T real server configuration mode.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-77 12.2.8.5 predictor Use this command to specify which load balancing algorith m to use for selecting a real server in an LSNA T server farm.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-78 M atrix NSA Series Configurati on Guide 12.2.8.6 sticky Use this command to configure sticky session persistence for this server farm. See “Sticky Persistence Configuration Considerations” on page 12-69 for more information.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-79 12.2.8.7 show ip slb reals Use this command to display info rmation about the real servers. show ip slb reals [ detail | serverfarm s erverfarmname [ detail ]] Synt ax Description Command T ype Router command.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-80 M atrix NSA Series Configurati on Guide T able 12-9 provides an explanation of the detailed command output. Matrix Router1(config)#> Router1>show ip slb reals serverfarm ten detail Server Farm : ten Real Server IP : 10.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-81 T able 12-9 show ip slb reals Output Det ails Output What It Displays... Server Farm Name of the server farm associated with this server .
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-82 M atrix NSA Series Configurati on Guide 12.2.8.8 inservice (real server) Use this command to enable a real LSNA T server . inservice Synt ax Description None.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-83 12.2.8.9 faildetect (real server) Use this command to configur e which method (typ e) is used to detect whether an LSNA T server is up or down.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-84 M atrix NSA Series Configurati on Guide Example This example shows how to set the ping interval to 10 seconds and the retry number to 6 for the real server at IP 10.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-85 12.2.8.10 maxconns Use this command to limit th e number of connections to a real LSNA T server .
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-86 M atrix NSA Series Configurati on Guide 12.2.8.1 1 weight Use this command to specify the we ight load number of a real server that is a member of an LSNA T server farm.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-87 12.2.8.12 show ip slb vservers Use this command to display server load balancing virtual server information.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-88 M atrix NSA Series Configurati on Guide This example shows how to display detailed in formation about the “t est” virtual server: T able 12-10 provides an explanation of the detailed command output.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-89 In Service Whether or not this vi rtual server is enabled (using the inservice command as describe d in Section 12.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-90 M atrix NSA Series Configurati on Guide 12.2.8.13 ip slb vserver Use this command to identify an LSNA T virtual server and to access or enable the virtual server load balance (SLB) configuratio n mode.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-91 12.2.8.14 serverfarm Use this command to associate a virtual server with an LSN A T se rver farm.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-92 M atrix NSA Series Configurati on Guide 12.2.8.15 virtual Use this command to configure a virtual server IP address.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-93 Command Mode SLB V irtual Server Configuration mode: Matrix>Router1(config-slb-vserver)# Command Default s If a TCP service name is not specified, none will be applied.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-94 M atrix NSA Series Configurati on Guide 12.2.8.16 inservice (virtual server) Use this command to enable a virtual LSNA T server . inservice Synt ax Description None.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-95 12.2.8.17 client Use this command to allow a specific client to us e a virtual server . If no clients are specified with this command, all clients will be allowed to use a virtual server .
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-96 M atrix NSA Series Configurati on Guide 12.2.8.18 persistence level Use this command to set the type of binding used and the time limit to allow clients to remain bound to an LSNA T virtual server .
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-97 Command Default s If not specified, persistence level is set to TCP .
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-98 M atrix NSA Series Configurati on Guide 12.2.8.19 allow accessservers Use this command to allow specific clients to a ccess the load balancing real servers in a particular LSNA T server farm without address translation.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configu ration Guide 12-99 12.2.8.20 ip slb allow access_all Use this command to allow all clients to direct ly access all services provided by real servers EXCEP T FOR those services configured for server load balancing.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-100 Matrix NSA Series Configuration Guide Matrix>Router1(config)# ip slb allowacce ss_all Matrix>Router1(config)#ip slb s erverfarm httpserver Matrix>Router1(config-slb-sfarm )#real 10.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configura tion Guide 12-1 01 12.2.8.21 show ip slb conns Use this command to display active server load balancing connections.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-102 Matrix NSA Series Configuration Guide This example shows how to display detailed in formation about active se rver load balancing connections: T able 12-1 1 provides an explanation of the detailed c ommand output.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configura tion Guide 12-1 03 12.2.8.22 show ip slb st ats Use this command to display lo ad server balancing statistics. show ip slb stats Synt ax Description None.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-104 Matrix NSA Series Configuration Guide 12.2.8.23 show ip slb sticky Use this command to display server lo ad balancing active sticky connections. show ip slb sticky [ client ip-address ] Synt ax Description Command T ype Router command.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configura tion Guide 12-1 05 12.2.8.24 clear ip slb Use this command to clear server load balancing counters or to remove server load balancing connections.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-106 Matrix NSA Series Configuration Guide 12.2.8.25 show router l imit s Use this command to disp lay LSNA T router limits. show router limits [ lsnat-bindings ] | [ lsnat-cache] | [ lsnat-configs ] Synt ax Description Command T ype Switch command.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configura tion Guide 12-1 07 12.2.8.26 set router limits Use this command to set LSNA T router limits.
IP Configuration Command Set Configuring Load Sharing Network Address T ranslation (LSNA T) 12-108 Matrix NSA Series Configuration Guide configured, and up to 500 real s ervers and 500 client access entries can be configured. Example This example shows how to set the LSNA T configur ation limit to 25.
IP Configuration Command Set Configuring Load Sharing Netwo rk Address T ranslation (LSNA T) Matrix NSA Series Configura tion Guide 12-1 09 12.2.8.27 clear router limits Use this command to reset chassis-b ased LSNA T limits to default values.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-1 10 Matrix NSA Series Configuration Guide 12.2.9 Configuring Dynamic Ho st Configuration Protocol (DHCP) DHCP Ov.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Configuration Guide 12-1 1 1 DHCP T a sk List The CLI commands for DHCP Serv er provide functionality for: 1. Configuring a DHCP local pool for a subnet (required) 2.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-1 12 Matrix NSA Series Configuration Guide Commands The commands used to configure DHCP are liste d below and described in the associa ted section as shown: • ip dhcp server ( Section 12.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Co nfiguration Guide 12-1 13 • client-class ( Section 12.2.9.17 ) • client-identifier ( Section 12.2.9.18 ) • client-name ( Section 12.2.9.19 ) • hardware-address ( Section 12.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-1 14 Matrix NSA Series Configuration Guide 12.2.9.1 ip dhcp server Use this command to enable DHCP server features on a routing interface. ip dhcp server Synt ax Description None.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Co nfiguration Guide 12-1 15 12.2.9.2 ip local pool Use this command to configure a lo cal address pool to us e as a DHCP subnet. This defines the range of IP addresses to be used by DHCP server an d enables IP local pool configuration mode.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-1 16 Matrix NSA Series Configuration Guide 12.2.9.3 exclude Use this command to exclude one or more addresses from a DHCP local address pool.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Co nfiguration Guide 12-1 17 12.2.9.4 ip dhcp ping packet s Use this command to specify the number of pack ets a DHCP server sends to an IP address before assigning the address to a requesting client.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-1 18 Matrix NSA Series Configuration Guide 12.2.9.5 ip dhcp ping timeout Use this command to specify the amount of time the DHCP server will wait for a ping reply from an IP address before timing out.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Co nfiguration Guide 12-1 19 12.2.9.6 ip dhcp pool Use this command to assign a name to a DHCP server pool of addresses, and to enable DHCP address pool configura tion mode.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-120 Matrix NSA Series Configuration Guide 12.2.9.7 domain-name Use this command to assign a do main name to a DHCP client.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Configura tion Guide 12-1 21 12.2.9.8 dns-server Use this command to assign one or more DNS servers to DHCP clients. dns-server addr ess [ addr ess2.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-122 Matrix NSA Series Configuration Guide 12.2.9.9 netbios-name-server Use this command to assign one or more NetBIOS WINS servers to DHCP clients. netbios-name-server addr ess [ addr ess2.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Configura tion Guide 12-1 23 12.2.9.10 netbios-node-type Use this command to assign a NetBIOS node (server) type to DHCP clients.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-124 Matrix NSA Series Configuration Guide 12.2.9.1 1 default-router Use this command to assign a default router list to DHCP clients. default-router addr ess [ addr ess2.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Configura tion Guide 12-1 25 12.2.9.12 bootfile Use this command to specify the defa ult boot image for a DHCP client.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-126 Matrix NSA Series Configuration Guide 12.2.9.13 next-server Use this command to specify the next server in the DHCP server boot process. The next server is the server the client will contact for the boot file if the primary server is not able to supply it.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Configura tion Guide 12-1 27 12.2.9.14 option Use this command to configure DHCP options.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-128 Matrix NSA Series Configuration Guide This example shows how to configure DHCP optio n 72, which assigns one or more W eb servers for DHCP clients.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Configura tion Guide 12-1 29 12.2.9.15 lease Use this command to specify the duration of the lea se for an IP address assigned by a DHCP serve r to a client.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-130 Matrix NSA Series Configuration Guide 12.2.9.16 host Use this command to sp ecify an IP address and network mask for manual DHCP binding.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Configura tion Guide 12-1 31 12.2.9.17 client-class Use this command to identify an DH CP client class.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-132 Matrix NSA Series Configuration Guide 12.2.9.18 client-identifier Use this command to enable D HCP host configur ation mode and associate a client class with a DHCP client.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Configura tion Guide 12-1 33 12.2.9.19 client-name Use this command to assign a name to a DHCP client.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-134 Matrix NSA Series Configuration Guide 12.2.9.20 hardware-address Use this command to specify parameters for a new DHCP client address. This command also enables DHCP host configuration mode.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Configura tion Guide 12-1 35 12.2.9.21 show ip dhcp binding Use this command to display information about one or all DHCP address bindings. show ip dhcp binding [ ip - addr ess ] Synt ax Description Command T ype Router command.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-136 Matrix NSA Series Configuration Guide 12.2.9.22 clear ip dhcp binding Use this command to delete one or all automatic DHCP address bindings. clear ip dhcp binding { addr ess | * } Synt ax Description Command T ype Router command.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Configura tion Guide 12-1 37 12.2.9.23 sho w ip dhcp server st atistics Use this command to display DHCP server statistics. show ip dhcp server statistics Synt ax Description None.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-138 Matrix NSA Series Configuration Guide T able 12-13 provides an explanation o f the command output. T able 12-13 show ip dhcp server statistics Outp ut Details Output What It Displays.
IP Configuration Command Set Configuring Dynamic Host C onfiguration Protocol (DHCP) Matrix NSA Series Configura tion Guide 12-1 39 12.2.9.24 clear i p dhcp server st atistics Use this command to reset all DHCP server counte rs. clear ip dhcp server statistics Synt ax Description None.
IP Configuration Command Set Configuring Dynamic Host Configuration Protocol (DHCP) 12-140 Matrix NSA Series Configuration Guide.
Matrix NSA Series Configuration Guide 13-1 13 Routing Protocol Configuration This chapter describes the Routing Protocol Config uration set of commands and how to use them. 13.1 PROCESS OVERVIEW: ROUTING PROTOCOL CONFIGURATION Use the following steps as a guide to conf iguring routing protocols on the device: 1.
Routing Protocol Configuration Comman d Set Activating Advanced Routing Features 13-2 Matrix N SA Series Configuration Guide 13.2 ROUTING PROTOCOL CONFIGURATION COMMAND SET 13.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configuration Guide 13-3 Specify a RIP version. ip rip send version ( Section 13.2.2.7 ) ip rip receive version ( Section 13.2. 2.8 ) Configure RIP authentication. key chain ( Section 13.
Routing Protocol Configuration Comman d Set Configuring RIP 13-4 Matrix N SA Series Configuration Guide 13.2.2.1 router rip Use this command to enable or disable RIP configuration mode.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configuration Guide 13-5 13.2.2.2 network Use this command to attach a network of directly connected networks to a RIP routing process , or to remove a network from a RIP routing process.
Routing Protocol Configuration Comman d Set Configuring RIP 13-6 Matrix N SA Series Configuration Guide 13.2.2.3 neighbor Use this command to instruct the router to send un icast RIP information to an IP addr ess. RIP is normally a broadcast protocol.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configuration Guide 13-7 13.2.2.4 distance Use this command to configure th e administrative distance for RIP routes.
Routing Protocol Configuration Comman d Set Configuring RIP 13-8 Matrix N SA Series Configuration Guide Example This example shows how to ch ange the default administrative distance for RIP to 1001: M.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configuration Guide 13-9 13.2.2.5 ip rip offset Use this command to add or remove an of fset to the metric of an incoming or outgoin g RIP route. Adding an offset on an interface is used fo r the purpose of making an interface a backup.
Routing Protocol Configuration Comman d Set Configuring RIP 13-10 M atrix NSA Series Configurati on Guide 13.2.2.6 timers Use this command to adjust RIP routing timers determining the frequency of rou.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configuration Guide 13-1 1 13.2.2.7 ip rip send version Use this command to set the RIP version(s) for update packets tran smitted on an interface.
Routing Protocol Configuration Comman d Set Configuring RIP 13-12 M atrix NSA Series Configurati on Guide 13.2.2.8 ip rip receive version Use this command to set the RI P version(s) for update packets accepted on the interface.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configu ration Guide 13-13 About RIP Authentication The following tasks must be completed to configur e RIP authentication on a Matrix Series rout ing module: 1. Create a key chain as described in Section 13.
Routing Protocol Configuration Comman d Set Configuring RIP 13-14 M atrix NSA Series Configurati on Guide 13.2.2.9 key chain Creates or deletes a key chain used globally for RIP authentication.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configu ration Guide 13-15 13.2.2.10 key Use this command to identify a RIP authentication key on a key chain.
Routing Protocol Configuration Comman d Set Configuring RIP 13-16 M atrix NSA Series Configurati on Guide 13.2.2.1 1 key-string Use this command to specify a RIP authentication string for a key . Once configured, this string must be sent and received in RIP packets in order for them to be authenticated.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configu ration Guide 13-17 13.2.2.12 accept-lifeti me Use this command to speci fy the time period during which an authentication key on a key chain is valid to be received.
Routing Protocol Configuration Comman d Set Configuring RIP 13-18 M atrix NSA Series Configurati on Guide Command Mode Key chain key config ura tion: Matrix>Router1(con fig-keychain-key)# Command Default s None.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configu ration Guide 13-19 13.2.2.13 send-lifetime Use this command to speci fy the time period during which an authentication key on a key chain is valid to be sent.
Routing Protocol Configuration Comman d Set Configuring RIP 13-20 M atrix NSA Series Configurati on Guide Command Default s None. Example This example shows how to allow the “password” authenticat.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configu ration Guide 13-21 13.2.2.14 ip rip au thentication keychain Use this command to enable or disable a RIP au thentication key chain for use on an interface.
Routing Protocol Configuration Comman d Set Configuring RIP 13-22 M atrix NSA Series Configurati on Guide 13.2.2.15 ip rip authenti cation mode Use this command to set th e authentication mode when a key chain is present.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configu ration Guide 13-23 13.2.2.16 no auto-summary Use this command to disable automa tic route summarization.
Routing Protocol Configuration Comman d Set Configuring RIP 13-24 M atrix NSA Series Configurati on Guide 13.2.2.17 ip rip disable-triggered-updates Use this command to prevent RIP from sending trig gered updates.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configu ration Guide 13-25 13.2.2.18 ip split-horizon poison Use this command to enable or disable split ho rizon poison-reverse mode for RIP packets. Split horizon prevents packets from exit ing through the same interface on which they were received.
Routing Protocol Configuration Comman d Set Configuring RIP 13-26 M atrix NSA Series Configurati on Guide 13.2.2.19 p assive-interface Use this command to prevent RIP from tran smitting update packets on an interface.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configu ration Guide 13-27 13.2.2.20 receive-interface Use this command to allow RIP to receive update pa ckets on an inte rface. Th is does not affect the sending of RIP updates on the specified interface.
Routing Protocol Configuration Comman d Set Configuring RIP 13-28 M atrix NSA Series Configurati on Guide 13.2.2.21 distribute-list Use this command to filter networks received and to suppress networks from being advertised in RIP updates.
Routing Protocol Conf igura ti on Command Set Configuring RIP Matrix NSA Series Configu ration Guide 13-29 13.2.2.22 redistribute Use this command to allow rout ing information discovered through non-RIP proto cols to be distributed in RIP update messages.
Routing Protocol Configuration Comman d Set Configuring RIP 13-30 M atrix NSA Series Configurati on Guide Example This example shows how to redistribute routing info rmation discovered throu gh OSPF p.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-31 13.2.3 Configuring OSPF Purpose T o enable and configure th e Open Shortest Path First (OSPF) routing protocol. OSPF Configuration T ask List and Commands T able 13-2 lists the tasks and commands associated with OSPF configuration.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-32 M atrix NSA Series Configurati on Guide • Set a priority to help determine the OSPF designated router for the network. ip ospf priority ( Section 13. 2.3.5 ) • Adjust timers and message intervals.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-33 Limit link state database overflow . database-overflow ( Section 13.2.3.22 ) Monitor and maintain OSPF . show ip ospf ( Section 13.2.3.23 ) show ip ospf database ( Sectio n 13.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-34 M atrix NSA Series Configurati on Guide 13.2.3.1 router osp f Use this command to enable or disable Open Sh ortest Path First (OSPF) configuration mode.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-35 13.2.3.2 network Use this command to configur e area IDs for OSPF interfaces.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-36 M atrix NSA Series Configurati on Guide 13.2.3.3 router id Use this command to set the OSPF router ID for the device. The OSPF protocol uses the router ID as a tie-breaker for path selection.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-37 13.2.3.4 ip ospf cost Use this command to set the cost of sending an O SPF packet on an interface. Each router interface that participates in OSPF routing is assigned a de fault cost.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-38 M atrix NSA Series Configurati on Guide 13.2.3.5 ip osp f priority Use this command to set the OSPF priority value for router interfaces. The priority value is communicated between routers by means of he llo messages and influen ces the election of a designated rout er .
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-39 13.2.3.6 timers spf Use this command to change OSPF timer values to fine-t une the OSPF network.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-40 M atrix NSA Series Configurati on Guide 13.2.3.7 ip osp f retransmit-interval Use this command to set the amou nt of time between retransmissions of link state advertisements (LSAs) for adjacencies that belong to an interface.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-41 13.2.3.8 ip ospf transmit-delay Use this command to set the amount of time requir ed to transmit a link state upda te pa cket on an interface.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-42 M atrix NSA Series Configurati on Guide 13.2.3.9 ip osp f hello-interval Use this command to set th e number of seconds a ro uter must wait be fore sending a hello packet to neighbor routers on an in te rface.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-43 13.2.3.10 ip osp f dead -interval Use this command to set the numb er of seconds a router must wait to receive a hello packet from its neighbor before determining that the neighbor is out of service.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-44 M atrix NSA Series Configurati on Guide 13.2.3.1 1 ip ospf authentication-key Use this command to assign a password to be us ed by neighboring rout ers using OSPF’ s simple password authentication.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-45 13.2.3.12 ip o sp f message digest key md5 Use this command to enable or disable OSPF MD 5 authentication on an in terface . This validates OSPF MD5 routing up dates be tween neighborin g routers.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-46 M atrix NSA Series Configurati on Guide 13.2.3.13 distance osp f Use this command to configure the administrative distance for OSPF routes.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-47 Command Default s If route type is not specifie d, the distance value will be applied to all OSPF routes.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-48 M atrix NSA Series Configurati on Guide 13.2.3.14 area range Use this command to define the range of addresses to be used by Area Border Routers (ABRs) when they communicate routes to other areas.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-49 13.2.3.15 area authentication Use this command to enable or disa b le authentication for an OS PF area.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-50 M atrix NSA Series Configurati on Guide 13.2.3.16 area stub Use this command to define an OSPF area as a stub area.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-51 13.2.3.17 area defaul t cost Use this command to set the cost va lue for the default route that is sent into a stub area by an Area Border Router (ABR).
Routing Protocol Configuration Comman d Set Configuring OSPF 13-52 M atrix NSA Series Configurati on Guide 13.2.3.18 area nssa Use this command to configure an area as a no t so stubby area (NSSA). An NSSA allows some external routes represented by external Link State Advertisements (LSAs) to be imported into it.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-53 13.2.3.19 area virtual-link Use this command to define an OSPF virtual lin k, which represents a lo gical connection between the backbone and a non-backbone OSPF area.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-54 M atrix NSA Series Configurati on Guide Command Synt ax of the “no” Form The “no” form of this comm and removes the virtual l.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-55 13.2.3.20 passive-interface Use this command to enable passiv e OSPF on an interface. This allo ws an interface to be included in the OSPF route table, but turns of f sending and receiving hellos for an interface.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-56 M atrix NSA Series Configurati on Guide 13.2.3.21 redistribute Use this command to allow rou ting informatio n discovered through non-OSPF protocols to b e distributed in OSPF update messages.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-57 Command Synt ax of the “no” Form The “no” fo rm of this command clears redistributio.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-58 M atrix NSA Series Configurati on Guide 13.2.3.22 dat abase-overflow Use this command to limit the size of OSPF lin k state database overflow , a condition where the router is unable to maintain the database in its entirety .
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-59 Command Default s None. Example This example shows how to set the OSPF database exit overflo.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-60 M atrix NSA Series Configurati on Guide 13.2.3.23 show ip ospf Use this command to di splay OSPF information. show ip ospf Synt ax Description None. Command T ype Router command. Command Mode Any router mode.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-61 Example This example shows how to display OSPF information: Matrix>Router1# show ip ospf Routing Process "ospf 20 " with I D 134.141.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-62 M atrix NSA Series Configurati on Guide 13.2.3.24 show ip ospf dat abase Use this command to display the OSPF link state database.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-63 Command T ype Router command. Command Mode Any router mode. Command Default s If link-state-id is not specified, the specified ty pe of database records will be displayed for all link st ate IDs.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-64 M atrix NSA Series Configurati on Guide T able 13-3 show ip ospf dat abase Output Det ails Output What It Displays.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-65 13.2.3.25 sho w ip ospf border-routers Use this command to display in formation about OSPF internal entries to Area Border Routers (ABRs) and Autonomous System Boundary Routers (ASBRs).
Routing Protocol Configuration Comman d Set Configuring OSPF 13-66 M atrix NSA Series Configurati on Guide 13.2.3.26 show ip o sp f interface Use this command to display OSPF interface related information, in cluding network type, priority , cost, hello interval, and dead interval.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-67 T able 13-4 show ip osp f interface Output Det ails Output What It Displa ys... Vlan Interface (VLAN) administrative status as up or down. Internet Address IP address and mask assigned to this interface.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-68 M atrix NSA Series Configurati on Guide Adjacent neighbor count Number of adjacent (FULL state) neighbors over this interface. Adjacent with neighbor IP address of the adjacent neighbor .
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-69 13.2.3.27 show ip ospf neighbor Use this command to disp lay the state of communic ation between an OSPF router and its neighbor routers.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-70 M atrix NSA Series Configurati on Guide T able 13-5 provides an explanation of the comm and output. T able 13-5 show ip ospf neighb or Output Details Output What It Displays... ID Neighbor ’ s router ID of the OSPF neig hb or .
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-71 13.2.3.28 show ip ospf virtual-links Use this command to display info rmation about th e virtual links configured on a router . A virtual link represents a logical connection between the backbone and a non-backbone OSPF area.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-72 M atrix NSA Series Configurati on Guide T ransit Delay T ime (in seconds) a dded to the LSA (Link S tate Advertisement) age field when the LSA is transmitted through the virtual link. State Interface state assigned to a virtual link, which is point-to-point.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-73 13.2.3.29 clear ip osp f process Use this command to reset the OSPF process. This will require adjacencies to be reestablished and routes to be reconver ged.
Routing Protocol Configuration Comman d Set Configuring OSPF 13-74 M atrix NSA Series Configurati on Guide 13.2.3.30 debug ip ospf Use this command to enable OSPF prot oc ol debugging ou tput.
Routing Protocol Conf igura ti on Command Set Configuring OSPF Matrix NSA Series Configu ration Guide 13-75 13.2.3.31 rfc1583compatible Use this command to enable the O SPF router for RFC 1385 compatibility .
Routing Protocol Configuration Comman d Set Configuring DVMRP 13-76 M atrix NSA Series Configurati on Guide 13.2.4 Configuring DVMRP Purpose T o enable and configure the Distance V ector Mul ticast Routing Protocol (DVMRP) on an interface. DVMRP routes multicast traf fic using a techniqu e known as Reverse Path F orwarding.
Routing Protocol Conf igura ti on Command Set Configuring DVMRP Matrix NSA Series Configu ration Guide 13-77 13.2.4.1 ip dvmrp Use this command to enable or disable DVMRP on an interface.
Routing Protocol Configuration Comman d Set Configuring DVMRP 13-78 M atrix NSA Series Configurati on Guide 13.2.4.2 ip dvmrp metric Use this command to configure the metric associat ed with a set of destinations for DVMRP reports. ip dvmrp metric metric Synt ax Description Command T ype Router command.
Routing Protocol Conf igura ti on Command Set Configuring DVMRP Matrix NSA Series Configu ration Guide 13-79 13.2.4.3 show ip dvmrp route Use this command to displa y DVMRP routing information. show ip dvmrp route Synt ax Description None. Command T ype Router command.
Routing Protocol Configuration Comman d Set Configuring DVMRP 13-80 M atrix NSA Series Configurati on Guide Matrix>Router1# show ip dvmrp route flag characters used: ------------- V Neighbor is verified. P Neighbor supports pruning. G Neighbor supports generation ID.
Routing Protocol Conf igura ti on Command Set Configuring IRDP Matrix NSA Series Configu ration Guide 13-81 13.2.5 Configuring IRDP Purpose T o enable and configure the ICMP Router Discovery Protocol (IRDP) on an interface. This protocol enables a host to determine the address of a router it can use as a default gateway .
Routing Protocol Configuration Comman d Set Configuring IRDP 13-82 M atrix NSA Series Configurati on Guide 13.2.5.1 ip irdp Use this command to enable or disable IRDP on an interface.
Routing Protocol Conf igura ti on Command Set Configuring IRDP Matrix NSA Series Configu ration Guide 13-83 13.2.5.2 ip irdp maxadvertinterval Use this command to set the maximum interv al in seconds between IRDP advertisements.
Routing Protocol Configuration Comman d Set Configuring IRDP 13-84 M atrix NSA Series Configurati on Guide 13.2.5.3 ip irdp minadvertinterval Use this command to set the min imum interval in seconds between IRDP advertisements.
Routing Protocol Conf igura ti on Command Set Configuring IRDP Matrix NSA Series Configu ration Guide 13-85 13.2.5.4 ip irdp hold time Use this command to set the length of time in seconds IRDP advertise ments are held valid.
Routing Protocol Configuration Comman d Set Configuring IRDP 13-86 M atrix NSA Series Configurati on Guide 13.2.5.5 ip irdp preference Use this command to set the IRDP preference va lue for an interface. This valu e i s u s e d b y I R D P t o determine the interface’ s selection as a default gateway addre ss.
Routing Protocol Conf igura ti on Command Set Configuring IRDP Matrix NSA Series Configu ration Guide 13-87 13.2.5.6 ip irdp address Use this command to add additional IP addresses for IRDP to advertise.
Routing Protocol Configuration Comman d Set Configuring IRDP 13-88 M atrix NSA Series Configurati on Guide 13.2.5.7 no ip irdp multicast Use this command to enable the ro uter to se nd IRDP advertisements using broadcast rather than multicast transmissions.
Routing Protocol Conf igura ti on Command Set Configuring IRDP Matrix NSA Series Configu ration Guide 13-89 13.2.5.8 show ip ird p Use this command to display IRDP information. show ip irdp [ vlan vlan-id ] Synt ax Description Command T ype Router command.
Routing Protocol Configuration Comman d Set Configuring VRRP 13-90 M atrix NSA Series Configurati on Guide 13.2.6 Configuring VRRP Purpose T o enable an d configure the V irtual Router Redundancy P rotocol (VRRP).
Routing Protocol Conf igura ti on Command Set Configuring VRRP Matrix NSA Series Configu ration Guide 13-91 13.2.6.1 router vrrp Use this command to enable or disable VRRP configuration mode.
Routing Protocol Configuration Comman d Set Configuring VRRP 13-92 M atrix NSA Series Configurati on Guide 13.2.6.2 create Use this command to create a VRRP session. Each Matrix Series routing module or standalone device supports up to VRRP sessions. Up to four VRIDs can be assoc iated with an individual routing interface.
Routing Protocol Conf igura ti on Command Set Configuring VRRP Matrix NSA Series Configu ration Guide 13-93 13.2.6.3 address Use this command to configure a virtual router IP address. If the virtual router IP address is the same as the interface (VLAN) address owned by a VRRP router , then the route r owning the address becomes the master .
Routing Protocol Configuration Comman d Set Configuring VRRP 13-94 M atrix NSA Series Configurati on Guide Command T ype Router command. Command Mode Router configuration: Matrix>Router1(config-router)# Command Default s None. Examples This example shows how to configure a virtual router address of 1 82.
Routing Protocol Conf igura ti on Command Set Configuring VRRP Matrix NSA Series Configu ration Guide 13-95 13.2.6.4 priority Use this command to set a priority value for a VRRP router .
Routing Protocol Configuration Comman d Set Configuring VRRP 13-96 M atrix NSA Series Configurati on Guide 13.2.6.5 master-icmp-reply Use this command to enable ICMP replies for non-owner masters. Th is provides the ability for the virtual router maste r to respond to an ICMP echo even if it does not “own” the virtual IP address.
Routing Protocol Conf igura ti on Command Set Configuring VRRP Matrix NSA Series Configu ration Guide 13-97 13.2.6.6 advertise-interval Use this command to set the interval in seconds between VRRP advertisements.
Routing Protocol Configuration Comman d Set Configuring VRRP 13-98 M atrix NSA Series Configurati on Guide Example This example shows how set an advertise in terval of 3 seconds on VLAN 1, VRID 1: Mat.
Routing Protocol Conf igura ti on Command Set Configuring VRRP Matrix NSA Series Configu ration Guide 13-99 13.2.6.7 critical -ip Use this command to set a critical IP address for VRRP routing.
Routing Protocol Configuration Comman d Set Configuring VRRP 13-100 Matrix NSA Series Configuration Guide Example This example shows how to set IP address 182.127.62.3 as a critic al IP address associated wi th VLAN 1, VRID 1: Matrix>Router1(config)# router vrrp Matrix>Router1(config-router)# critical- ip vlan 1 1 182.
Routing Protocol Conf igura ti on Command Set Configuring VRRP Matrix NSA Series Configura tion Guide 13-1 01 13.2.6.8 preempt Use this command to enable or disable preempt mode on a VRRP router . Preempt is enabled on VRRP routers by default, which allows a higher pr iority backup router to preempt a lower priority master .
Routing Protocol Configuration Comman d Set Configuring VRRP 13-102 Matrix NSA Series Configuration Guide 13.2.6.9 preempt-delay Use this command to set a preempt delay time on a VRRP router . When preempt mode is enabled this specifies a delay (in seconds) that a higher pr iority backup router must wait to preempt a lower priority master .
Routing Protocol Conf igura ti on Command Set Configuring VRRP Matrix NSA Series Configura tion Guide 13-1 03 Example This example shows how to set the preemp t delay to 60 seconds on VLAN 1, VRID 1: .
Routing Protocol Configuration Comman d Set Configuring VRRP 13-104 Matrix NSA Series Configuration Guide 13.2.6.10 enable Use this command to enable V RRP on an interface.
Routing Protocol Conf igura ti on Command Set Configuring VRRP Matrix NSA Series Configura tion Guide 13-1 05 13.2.6.1 1 ip vrrp authentication-key Use this command to set a VRRP auth entication password on an interface.
Routing Protocol Configuration Comman d Set Configuring VRRP 13-106 Matrix NSA Series Configuration Guide 13.2.6.12 ip vrrp message-digest-key Use this command to set a VRRP MD5 au thentication password on an i nterface.
Routing Protocol Conf igura ti on Command Set Configuring VRRP Matrix NSA Series Configura tion Guide 13-1 07 13.2.6.13 show ip vrrp Use this command to displa y VRRP routing information. show ip vrrp Synt ax Description None. Command T ype Router command.
Routing Protocol Configuration Comman d Set Configuring VRRP 13-108 Matrix NSA Series Configuration Guide.
Matrix NSA Series Configuration Guide 14-1 14 Security Configuration This chapter describes the Security Configura tion set of commands and how to use them. 14.1 OVERVIEW OF SECURITY METHODS The following security methods are available fo r controlling which users are allowed to access, monitor , and mana ge the device.
Overview of Security Methods 14-2 Matrix N SA Series Configuration Guide • MAC Locking — locks a port to one or mo re MAC addresses, preventing connection of unauthorized devices via the port.
Overview of Security Methods RADIUS Filter-ID Attribute and Dynamic Policy Profile Assignment Matrix NSA Series Configuration Guide 14-3 14.1.1 RADIUS Filter-ID Attribut e and Dynamic Policy Profile A.
Process Overview: Security Configuration RADIUS Filter-ID Attribute and Dynamic Policy Profile Assignment 14-4 Matrix N SA Series Configuration Guide 14.2 PROCESS OVERVIEW: SECURITY CONFIGURATION Use the following steps as a guide to co nfig uring security methods on the device: 1.
Security Configuration Command Set Setting the Auth enticatio n Login Method Matrix NSA Series Configuration Guide 14-5 14.3 SECURITY CONFIGURATION COMMAND SET 14.3.1 Setting the Authentication Login Method Purpose T o configure the authentication logi n method.
Security Configuration Comman d Set Setting the Authentication Logi n Method 14-6 Matrix N SA Series Configuration Guide 14.3.1.1 show authenticati on login Use this command to display the current authenticatio n login method. show authen tication login Synt ax Description None.
Security Configuration Command Set Setting the Auth enticatio n Login Method Matrix NSA Series Configuration Guide 14-7 14.3.1.2 set auth entication login Use this command to set th e authentication login method. set authentication login { any | local | radius | tacacs } Synt ax Description Command T ype Switch command.
Security Configuration Comman d Set Setting the Authentication Logi n Method 14-8 Matrix N SA Series Configuration Guide 14.3.1.3 clear authenticat ion login Use this command to reset the authentication login method to the default setting of “any”.
Security Configuration Command Set Configuring RADIUS Matrix NSA Series Configuration Guide 14-9 14.3.2 Configuring RADIUS Purpose T o perform the following: • Review the RADIUS client/server configuration on the device. • Enable or disable the RADIUS client.
Security Configuration Comman d Set Configuring RADIUS 14-10 M atrix NSA Series Configurati on Guide 14.3.2.1 show radius Use this command to display the current RADIUS client/server configuration. show radius [ state | retries authtype || timeout | server [ index | all ]] Synt ax Description Command T ype Switch command.
Security Configuration Command Set Configuring RADIUS Matrix NSA Series Configuration Guide 14-1 1 T able 14-1 provides an explan ation of the command output. T able 14-1 show radius Output De tails Output What It Displays... RADIUS state Whether the RADIUS client is enabled or disabled .
Security Configuration Comman d Set Configuring RADIUS 14-12 M atrix NSA Series Configurati on Guide 14.3.2.2 set radius Use this command to enable, disable, or configure RADIUS authentication.
Security Configuration Command Set Configuring RADIUS Matrix NSA Series Configu ration Guide 14-13 Command Default s • If secr et-value is not specified, none will be applied.
Security Configuration Comman d Set Configuring RADIUS 14-14 M atrix NSA Series Configurati on Guide 14.3.2.3 clear radius Use this command to clear RADIUS server settings. clear radius [ state ] [ retries ] [ timeout ] [ server [ index | all ] [ real m { index | all }] Synt ax Description Command T ype Switch command.
Security Configuration Command Set Configuring RADIUS Matrix NSA Series Configu ration Guide 14-15 14.3.2.4 show radi us accounting Use this command to display the RADIUS accoun ting configurat ion. This transmits accounting information between a network access se rver and a shared accounting server .
Security Configuration Comman d Set Configuring RADIUS 14-16 M atrix NSA Series Configurati on Guide For details on enabling and configuring RADIUS accounting, refer to Section 14.
Security Configuration Command Set Configuring RADIUS Matrix NSA Series Configu ration Guide 14-17 14.3.2.5 set ra dius accounting Use this command to conf igure RADIUS accounting.
Security Configuration Comman d Set Configuring RADIUS 14-18 M atrix NSA Series Configurati on Guide Command Mode Read-W rite. Command Default s None. Examples This example shows how to enab le the RADIUS accounting client for authenticating with the accounting server 1 at IP address 10.
Security Configuration Command Set Configuring RADIUS Matrix NSA Series Configu ration Guide 14-19 14.3.2.6 clear radius accounting Use this command to clear RADIUS accounting configuration settings.
Security Configuration Comman d Set Configuring RFC 3580 14-20 M atrix NSA Series Configurati on Guide 14.3.3 Configuring RFC 3580 About RFC 3580 RFC 3580 pro vides suggestions on how 802.1x Authent icators should leverage RADIUS as the backend AAA infrastructure.
Security Configuration Command Set Configuring RFC 3580 Matrix NSA Series Configu ration Guide 14-21 14.3.3.1 show vlanauthorization Use this command to display th e VLAN Authorization settings. show vlanauthorization [ port-list ] | [ all ] Synt ax Description Command T ype Switch command.
Security Configuration Comman d Set Configuring RFC 3580 14-22 M atrix NSA Series Configurati on Guide 14.3.3.2 set vlanauthorization Use this command to set the VL AN Authorization attributes.
Security Configuration Command Set Configuring RFC 3580 Matrix NSA Series Configu ration Guide 14-23 14.3.3.3 clear vlanauthorization Use this command to clear the VLAN Authorization attributes to the defaults. clear vlanauthorization port-list all Synt ax Description Command T ype Switch command.
Security Configuration Comman d Set Configuring T ACACS+ 14-24 M atrix NSA Series Configurati on Guide 14.3.4 Configuring T ACACS+ Purpose T o perform the following: • Review the T ACACS+ client and server configurations on the device. • Enable or disable the T ACACS+ client.
Security Configuration Command Set Configuring T ACACS+ Matrix NSA Series Configu ration Guide 14-25 14.3.4.1 show tacacs Use this command to display the current T A CACS+ configuration in formation and status.
Security Configuration Comman d Set Configuring T ACACS+ 14-26 M atrix NSA Series Configurati on Guide T able 14-2 show t acacs Output Det ails Output What It Displays... T ACACS+ state Whether the T ACACS+ client is enabled or disabled . T ACACS+ session accounting state Whether T ACACS+ sess ion accounting is enabled or disabled .
Security Configuration Command Set Configuring T ACACS+ Matrix NSA Series Configu ration Guide 14-27 14.3.4.2 set tacacs Use this command to enable or disable the T ACACS+ client. set tacacs { enable | disable } Synt ax Description Command Default s None.
Security Configuration Comman d Set Configuring T ACACS+ 14-28 M atrix NSA Series Configurati on Guide 14.3.4.3 show ta cacs server Use this command to display the cu rrent T ACACS+ server configuration. show tacacs server { index | all } Synt ax Description Command Default s None.
Security Configuration Command Set Configuring T ACACS+ Matrix NSA Series Configu ration Guide 14-29 14.3.4.4 set tacacs server Use this command to configure the T ACACS+ serve r(s) to be used by the T ACACS+ client.
Security Configuration Comman d Set Configuring T ACACS+ 14-30 M atrix NSA Series Configurati on Guide 14.3.4.5 clear t acacs server Use this command to remove one or all configured T ACACS+ servers, or to return the timeout value to its default value for one or all configured T ACACS+ servers.
Security Configuration Command Set Configuring T ACACS+ Matrix NSA Series Configu ration Guide 14-31 14.3.4.6 show tacacs session Use this command to display the curre nt T ACACS+ client session settings.
Security Configuration Comman d Set Configuring T ACACS+ 14-32 M atrix NSA Series Configurati on Guide 14.3.4.7 set t a cacs session Use this command to enable or disable T ACACS + session accounting, or to configure T ACACS+ session authorization parameters.
Security Configuration Command Set Configuring T ACACS+ Matrix NSA Series Configu ration Guide 14-33 Command Default s None. Command T ype Switch command.
Security Configuration Comman d Set Configuring T ACACS+ 14-34 M atrix NSA Series Configurati on Guide 14.3.4.8 clear t acacs session Use this command to return the T ACACS+ session authorization settings to their default values.
Security Configuration Command Set Configuring T ACACS+ Matrix NSA Series Configu ration Guide 14-35 14.3.4.9 show tacacs command Use this command to display the sta t us (enabled or disabled) of T ACACS+ acc ounting or authorization on a per-command basis.
Security Configuration Comman d Set Configuring T ACACS+ 14-36 M atrix NSA Series Configurati on Guide 14.3.4.10 set tacacs command Use this command to enable or disable T ACACS + accounting or authori zation on a per-command basis. set tacacs command { accounting | authorization } { enable | disable } Synt ax Description Command Default s None.
Security Configuration Command Set Configuring T ACACS+ Matrix NSA Series Configu ration Guide 14-37 14.3.4.1 1 show t acacs si ngleconnect Use this command to display the current status of the T ACACS+ client’ s ability to send multiple requests over a single TCP connection.
Security Configuration Comman d Set Configuring T ACACS+ 14-38 M atrix NSA Series Configurati on Guide 14.3.4.12 set tacacs singleconnect Use this command to enable or disable the ability of the T ACACS+ client to send multiple requests over a single TCP connection.
Security Configuration Command Set Configuring 802.1X Authentication Matrix NSA Series Configu ration Guide 14-39 14.3.5 Configuring 802.1X Authentication About Multi-User Authentication Enterasys Networks’ enhanced version of the IEEE 802.
Security Configuration Comman d Set Configuring 802.1X Authentication 14-40 M atrix NSA Series Configurati on Guide Commands The commands used to review and configure 802.1X are liste d below and described in the associated section as shown: • show dot1x ( Section 14.
Security Configuration Command Set Configuring 802.1X Authentication Matrix NSA Series Configu ration Guide 14-41 14.3.5.1 show do t1x Use this command to display 802.1X status, di agnostics, statistics, and reauthentication or initialization control information for one or more ports.
Security Configuration Comman d Set Configuring 802.1X Authentication 14-42 M atrix NSA Series Configurati on Guide • If port-string is not specified, information for all ports will be displayed. Examples This example shows how to display 802.1X status: This example shows how to di splay authentication diagnost ics information for fe.
Security Configuration Command Set Configuring 802.1X Authentication Matrix NSA Series Configu ration Guide 14-43 This example shows how to display authen tication session statistics for fe.1.1: This example shows how to display authentication sta tistics for fe.
Security Configuration Comman d Set Configuring 802.1X Authentication 14-44 M atrix NSA Series Configurati on Guide 14.3.5.2 show dot1x auth-config Use this command to display 802.
Security Configuration Command Set Configuring 802.1X Authentication Matrix NSA Series Configu ration Guide 14-45 Command T ype Switch command. Command Mode Read-Only . Command Default s • If no parameters are specified, all 802.1X settin gs will be displayed.
Security Configuration Comman d Set Configuring 802.1X Authentication 14-46 M atrix NSA Series Configurati on Guide 14.3.5.3 set dot1x Use this command to enable or disable 802.1X au thentication, to reauthenticate one or more access entities, or to reinitialize one or more supplicants.
Security Configuration Command Set Configuring 802.1X Authentication Matrix NSA Series Configu ration Guide 14-47 14.3.5.4 set dot1 x auth-config Use this command to config ure 80 2.
Security Configuration Comman d Set Configuring 802.1X Authentication 14-48 M atrix NSA Series Configurati on Guide Command T ype Switch command. Command Mode Read-W rite.
Security Configuration Command Set Configuring 802.1X Authentication Matrix NSA Series Configu ration Guide 14-49 14.3.5.5 clear d ot1x auth-config Use this command to reset 802.
Security Configuration Comman d Set Configuring 802.1X Authentication 14-50 M atrix NSA Series Configurati on Guide • If port-string is not specified, paramete rs will be set on all ports.
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-51 14.3.6 Configuring Port Web Authentication (PW A) About PW A PW A provides a way of authenticating users before allowing general access to the network.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-52 M atrix NSA Series Configurati on Guide Setting the port mode in this fashion will al l ow traffic to flow through the port without authentication according to its configuration.
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-53 Commands The comma nds needed to review and configure PW A are listed below and described in the associated section as shown: • show pwa ( Section 14.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-54 M atrix NSA Series Configurati on Guide 14.3.6.1 show pwa Use this command to display por t web authen tication information fo r one or more ports.
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-55 T able 14-3 show pwa Output Det ails Output What It Displays... PW A Status Whether or not port web authentication is enabled or disabled.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-56 M atrix NSA Series Configurati on Guide Mode PW A port co ntrol mode. Auth Status Whether or not the port state is disconnected, authenticating authenticated, or held (a uthentication has failed).
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-57 14.3.6.2 set pwa Use this command to enable or disable port web authentica tion. set pwa { enable | disable } Synt ax Description Command Default s None.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-58 M atrix NSA Series Configurati on Guide 14.3.6.3 set pwa hostname Use this command to set a port web authenticatio n host name. This is a URL for accessing the PW A login pag e.
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-59 14.3.6.4 clear pwa h ostname Use this command to clear the po rt web authentication host name. clear pwa hostname Synt ax Description None.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-60 M atrix NSA Series Configurati on Guide 14.3.6.5 show pwa banner Use this command to display the port web authentication login banner string. show pwa banner Synt ax Description None.
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-61 14.3.6.6 set pwa ban ner Use this command to configure a string to be displayed as the PW A login banner . set pwa banner string Synt ax Description Command Default s None.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-62 M atrix NSA Series Configurati on Guide 14.3.6.7 clear pwa banner Use this command to reset the PW A login banner to a blank string. clear pwa banner Synt ax Description None.
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-63 14.3.6.8 set pwa displaylogo Use this command to set the display opt ions for the Enterasys Networks logo. set pwa displaylogo { display | hide } Synt ax Description Command Default s None.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-64 M atrix NSA Series Configurati on Guide 14.3.6.9 set pwa redirectt ime Use this command to set the PW A login succe ss pa ge redirect time. set pwa redirecttime time Synt ax Description Command Default s None.
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-65 14.3.6.10 set pwa ip address Use this command to set the PW A IP addre ss. This is the IP addr es s of the end station from which PW A will prevent network access until the user is authenticated.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-66 M atrix NSA Series Configurati on Guide 14.3.6.1 1 set p wa protocol Use this command to set the po rt web authentication protocol. set pwa protocol { chap | pap } Synt ax Description Command Default s None.
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-67 14.3.6.12 set pwa enhancedmode Use this command to enable or dis able PW A en hanced mode.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-68 M atrix NSA Series Configurati on Guide 14.3.6.13 set pwa guestname Use this command to set a guest user name for PW A en hanced mode networking. When e nhanced mode is enabled (as describe d in Section 14.
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-69 14.3.6.14 clear p wa guestname Use this command to clear the PW A guest user name. clear pwa guestname Synt ax Description None. Command T ype Switch command.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-70 M atrix NSA Series Configurati on Guide 14.3.6.15 set pwa guestpassword Use this command to set the guest user password for PW A network ing. When enhanced mode is enabled, (as describe d in Section 14.
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-71 14.3.6.16 set pwa guest status Use this command to enable or disable guest networking for port we b authentication. When enhanced mode is enabled (as describe d in Section 1 4.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-72 M atrix NSA Series Configurati on Guide 14.3.6.17 set pwa initialize Use this command to initializ e a PW A port to its defa ult unauthenticated state. set pwa initialize [ port-string ] Synt ax Description Command T ype Switch command.
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-73 14.3.6.18 set pwa quietperiod Use this command to set the amount of time a port will remain in the held state after a user unsuccessfully attempts to log on to the network.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-74 M atrix NSA Series Configurati on Guide 14.3.6.19 set pwa maxrequests Use this command to set the maximum number of log on attempts allowed be fore transitioning the PW A port to a held state.
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-75 14.3.6.20 set pwa portcontrol Use this command to set the PW A port control mode.
Security Configuration Comman d Set Configuring Port Web Authentication (PWA) 14-76 M atrix NSA Series Configurati on Guide Example This example shows how to set the PW A control mode to auto for all .
Security Configuration Command Set Configuring Port Web Authentication (PWA) Matrix NSA Series Configu ration Guide 14-77 14.3.6.21 sho w pwa session Use this command to display info rmation about current PW A sessions . show pwa session [ port-string ] Synt ax Description Command T ype Switch command.
Security Configuration Comman d Set Configuring MAC Authenticatio n 14-78 M atrix NSA Series Configurati on Guide 14.3.7 Configuring MAC Authentication Purpose T o review , disable , enable and configure MA C authentication. This allows the device to authenticate source MAC addresses in an exchange w ith an authen tication server .
Security Configuration Command Set Configuring MAC Authentica tion Matrix NSA Series Configu ration Guide 14-79 • clear macauthentication reauthperiod ( Section 14.3.7.17 ) • set macauthentication quietperiod ( Section 14.3.7.18 ) • clear macauthentication quietperiod ( Section 14.
Security Configuration Comman d Set Configuring MAC Authenticatio n 14-80 M atrix NSA Series Configurati on Guide 14.3.7.1 show macauthent ication Use this command to displa y MAC authentication information for one or more ports. show macauthentication [ port-string ] Synt ax Description Command T ype Switch command.
Security Configuration Command Set Configuring MAC Authentica tion Matrix NSA Series Configu ration Guide 14-81 T able 14-4 show macauthentication Ou tput Details Output What It Displays... MAC authentication Whether MAC authen tication is globally enabled or disabled.
Security Configuration Comman d Set Configuring MAC Authenticatio n 14-82 M atrix NSA Series Configurati on Guide 14.3.7.2 show macauthenticati on session Use this command to display the active MAC authenticated sessions. show macauthentication session Synt ax Description None.
Security Configuration Command Set Configuring MAC Authentica tion Matrix NSA Series Configu ration Guide 14-83 Reauth Period Reauthentication peri od for this port, set using the set macauthentication reauthperiod command describe d in Section 14.3.7.
Security Configuration Comman d Set Configuring MAC Authenticatio n 14-84 M atrix NSA Series Configurati on Guide 14.3.7.3 set macauthentication Use this command to globally enab le or disable MAC authentication. set macauthentication { enable | disable } Synt ax Description Command T ype Switch command.
Security Configuration Command Set Configuring MAC Authentica tion Matrix NSA Series Configu ration Guide 14-85 14.3.7.4 set macauth entication p a ssword Use this command to set a MAC authentication password. set macauthentication password passwor d Synt ax Description Command T ype Switch command.
Security Configuration Comman d Set Configuring MAC Authenticatio n 14-86 M atrix NSA Series Configurati on Guide 14.3.7.5 clear macauthentication password Use this command to clear the MAC authentication password. clear macauthentication password Synt ax Description None.
Security Configuration Command Set Configuring MAC Authentica tion Matrix NSA Series Configu ration Guide 14-87 14.3.7.6 set macauthenti cation significant-bit s Use this command to set the number of sign ificant bits of the MAC address to use for authentication.
Security Configuration Comman d Set Configuring MAC Authenticatio n 14-88 M atrix NSA Series Configurati on Guide 14.3.7.7 clear macauthentication significant-bit s Use this command to clear the MAC au thentication significant bits setting. clear macauthenticat ion significant-bits Synt ax Description None.
Security Configuration Command Set Configuring MAC Authentica tion Matrix NSA Series Configu ration Guide 14-89 14.3.7.8 set macauth entication port Use this command to enable or disable one or more ports for MAC authentication. set macauthentication port { enable | disable } port-string Synt ax Description Command T ype Switch command.
Security Configuration Comman d Set Configuring MAC Authenticatio n 14-90 M atrix NSA Series Configurati on Guide 14.3.7.9 set macauthentication authallocated Use this command to set the numb er of MAC authentication sessions allowed for one or more ports.
Security Configuration Command Set Configuring MAC Authentica tion Matrix NSA Series Configu ration Guide 14-91 14.3.7.10 clear macauthenti cation authallocated Use this command to clear the number of MAC authentication sessions allowed for one or more ports.
Security Configuration Comman d Set Configuring MAC Authenticatio n 14-92 M atrix NSA Series Configurati on Guide 14.3.7.1 1 set macauthentication portinitialize Use this command to force one or more MAC auth entication ports to re-initialize and remove any currently active sessions on thos e ports.
Security Configuration Command Set Configuring MAC Authentica tion Matrix NSA Series Configu ration Guide 14-93 14.3.7.12 set macauthentication macinitiali ze Use this command to force a current MAC authenticatio n session to re-initialize and remove the session.
Security Configuration Comman d Set Configuring MAC Authenticatio n 14-94 M atrix NSA Series Configurati on Guide 14.3.7.13 set macauthentication reauthentication Use this command to enable or disable reauth entication of all currently authenticated MAC addresses on one or more ports.
Security Configuration Command Set Configuring MAC Authentica tion Matrix NSA Series Configu ration Guide 14-95 14.3.7.14 set macauthentication portreauthenticate Use this command to force an immediate reauthenti cation of the currently active sessions on one or more MAC authentication ports.
Security Configuration Comman d Set Configuring MAC Authenticatio n 14-96 M atrix NSA Series Configurati on Guide 14.3.7.15 set macauthentication macreauthenticate Use this command to forc e an immediate reauthentication of a MAC addre ss. set macauthenticatio n mac reauthen ticate mac_addr Synt ax Description Command T ype Switch command.
Security Configuration Command Set Configuring MAC Authentica tion Matrix NSA Series Configu ration Guide 14-97 14.3.7.16 set macauthenti cation reauthperiod Use this command to set the MA C reauthentication period (in se conds). This is the time lapse between attempts to reauthenticate any curre nt MAC address authenticated to a port.
Security Configuration Comman d Set Configuring MAC Authenticatio n 14-98 M atrix NSA Series Configurati on Guide 14.3.7.17 clear macauthentication reaut hperiod Use this command to clear the MAC reauth entication period on one or more ports. clear macauthentication reauthperiod [ port-string ] Synt ax Description Command T ype Switch command.
Security Configuration Command Set Configuring MAC Authentica tion Matrix NSA Series Configu ration Guide 14-99 14.3.7.18 set macauthe ntication quietperiod Use this command to enable a reauthentication atte mpt for failed entries at the period specified in seconds.
Security Configuration Comman d Set Configuring MAC Authenticatio n 14-100 Matrix NSA Series Configuration Guide 14.3.7.19 clear macauthentication q uietperiod Use this command to clear the macauthentication qu iet period on one or more ports to the default value.
Security Configuration Command Set Configuring Conver gence End Points (CEP) Phone De tection Matrix NSA Series Configura tion Guide 14-1 01 14.3.8 Configuring Conver gence End Points (C EP) Phone Det.
Security Configuration Comman d Set Configuring Convergence End Points (CEP) Phone Detection 14-102 Matrix NSA Series Configuration Guide • show cep connections ( Section 14.3. 8.1 ) • show cep detection ( Section 14.3.8.2 ) • show cep policy ( Section 14.
Security Configuration Command Set Configuring Conver gence End Points (CEP) Phone De tection Matrix NSA Series Configura tion Guide 14-1 03 14.3.8.1 show cep connections Use this command to display all learned CEPs. show cep connections port-string Synt ax Description Command Default s None Command Mode Read-Only .
Security Configuration Comman d Set Configuring Convergence End Points (CEP) Phone Detection 14-104 Matrix NSA Series Configuration Guide 14.3.8.2 show cep detection Use this command to display CE P phone detection parameters.
Security Configuration Command Set Configuring Conver gence End Points (CEP) Phone De tection Matrix NSA Series Configura tion Guide 14-1 05 14.3.8.3 show cep po licy Use this command to display the global policies of all su pported CEP types. show cep policy Synt ax Description None.
Security Configuration Comman d Set Configuring Convergence End Points (CEP) Phone Detection 14-106 Matrix NSA Series Configuration Guide 14.3.8.4 show cep port Use this command to disp lay enable status of all supported CEP types. show cep port port-string Synt ax Description Command Default s None Command Mode Read-Only .
Security Configuration Command Set Configuring Conver gence End Points (CEP) Phone De tection Matrix NSA Series Configura tion Guide 14-1 07 14.3.8.5 set cep Use this command to globally en able or disable CEP detection. set cep { enable | disable } Synt ax Description Command Default s None.
Security Configuration Comman d Set Configuring Convergence End Points (CEP) Phone Detection 14-108 Matrix NSA Series Configuration Guide 14.3.8.6 set cep port Use this command to enable or disable a CEP detection type on one or more ports.
Security Configuration Command Set Configuring Conver gence End Points (CEP) Phone De tection Matrix NSA Series Configura tion Guide 14-1 09 14.3.8.7 set cep policy Use this command to set a global defau lt policy for a CEP detection type. This is the policy that will be applied when a phone of the specified type is de tected on a port.
Security Configuration Comman d Set Configuring Convergence End Points (CEP) Phone Detection 14-1 10 Matrix NSA Series Configuration Guide 14.3.8.8 set cep detection-id Use this command to create a new H.323, Siemens, or SIP phone detection co nfiguration group, or enable, disable o r remove an existing group.
Security Configuration Command Set Configuring Conver gence End Points (CEP) Phone De tection Matrix NSA Series Configuration Guide 14-1 1 1 14.3.8.9 set cep detection-id type Use this command to specify wh ether a phone detection group will use H.323, Siemens or SIP as its phone discovery typ e.
Security Configuration Comman d Set Configuring Convergence End Points (CEP) Phone Detection 14-1 12 Matrix NSA Series Configuration Guide 14.3.8.10 set cep detection-id address Use this command to set an H.323, Siemens, or SI P phone detection group’ s IP address or mask.
Security Configuration Command Set Configuring Conver gence End Points (CEP) Phone De tection Matrix NSA Series Co nfiguration Guide 14-1 13 14.3.8.1 1 set cep de tection-id protocol Use this command to specify an IP protocol type for H.323, Siemens, or SIP conv ergence end points detection.
Security Configuration Comman d Set Configuring Convergence End Points (CEP) Phone Detection 14-1 14 Matrix NSA Series Configuration Guide 14.3.8.12 set cep detection-id porthigh | portlow Use this command to set the maximum and minimu m ports used for TCP or UDP convergence end points detection.
Security Configuration Command Set Configuring Conver gence End Points (CEP) Phone De tection Matrix NSA Series Co nfiguration Guide 14-1 15 14.3.8.13 set cep initialize Use this command to clear all ex isting CEP conn ections for one or more CEP-enabled p orts.
Security Configuration Comman d Set Configuring Convergence End Points (CEP) Phone Detection 14-1 16 Matrix NSA Series Configuration Guide 14.3.8.14 clear cep Use this command to clear conver gence end points para meters.
Security Configuration Command Set Configuring Conver gence End Points (CEP) Phone De tection Matrix NSA Series Co nfiguration Guide 14-1 17 Examples This example shows how to clear all CEP policy parameters This example shows how to clear detection id 4 parameters This example shows how to clears ports fe .
Security Configuration Comman d Set Configuring MAC Locking 14-1 18 Matrix NSA Series Configuration Guide 14.3.9 Configuring MAC Locking Purpose T o review , dis able, enable and configure MAC locking. This lock s a MAC address to one or more ports, preventing con nection of unau thorized de vices via the port(s).
Security Configuration Command Set Configuring MAC Locking Matrix NSA Series Co nfiguration Guide 14-1 19 14.3.9.1 show maclo ck Use this command to display the status of MAC locking on one or more ports.
Security Configuration Comman d Set Configuring MAC Locking 14-120 Matrix NSA Series Configuration Guide T able 14-6 show maclock Output Det ails Output What It Displays... Port Number Port des i gnation. Fo r a detailed description of possible port_string values, refer to Section 4.
Security Configuration Command Set Configuring MAC Locking Matrix NSA Series Configura tion Guide 14-1 21 14.3.9.2 show maclo ck stations Use this command to disp lay MAC locking information about en d stations connected to the device.
Security Configuration Comman d Set Configuring MAC Locking 14-122 Matrix NSA Series Configuration Guide T able 14-7 provides an explanation of the command output. T able 14 -7 show maclo c k stations Outp ut Details Output What It Displays... Port Number Port des i gnation.
Security Configuration Command Set Configuring MAC Locking Matrix NSA Series Configura tion Guide 14-1 23 14.3.9.3 set maclock en able Use this command to enable MAC locking on on e or more ports.
Security Configuration Comman d Set Configuring MAC Locking 14-124 Matrix NSA Series Configuration Guide 14.3.9.4 set maclock disable Use this command to disable MAC locking on one or more ports. set maclock disable [ port_string ] Synt ax Description Command Default s If port_string is not specified, MAC locking w ill be disabled on all ports.
Security Configuration Command Set Configuring MAC Locking Matrix NSA Series Configura tion Guide 14-1 25 14.3.9.5 set maclock Use this command to create a static MAC addr ess and enable or disable MAC locking for the specific MAC address and port.
Security Configuration Comman d Set Configuring MAC Locking 14-126 Matrix NSA Series Configuration Guide 14.3.9.6 set maclock first arrival Use this command to restrict MAC locking on a port to a maximum number of end station addresses first connected to that port.
Security Configuration Command Set Configuring MAC Locking Matrix NSA Series Configura tion Guide 14-1 27 14.3.9.7 set maclock mo ve Use this command to move all current first arrival MACs to static entries. set maclock move port-string Synt ax Description Command Default s None.
Security Configuration Comman d Set Configuring MAC Locking 14-128 Matrix NSA Series Configuration Guide 14.3.9.8 clear maclock firstarrival Use this command to reset the number of first arri val MAC addresses allowed per port to the default value of 600.
Security Configuration Command Set Configuring MAC Locking Matrix NSA Series Configura tion Guide 14-1 29 14.3.9.9 set maclock static Use this comma nd to restrict MAC locking on a port to a maximum number of static (management defined) MAC addresses for end stations connected to that port.
Security Configuration Comman d Set Configuring MAC Locking 14-130 Matrix NSA Series Configuration Guide 14.3.9.10 clear maclock static Use this command to reset the number of s tatic MA C addresses allowed per port to the default value of 20. clear maclock static port_string Synt ax Description Command Default s None.
Security Configuration Command Set Configuring MAC Locking Matrix NSA Series Configura tion Guide 14-1 31 14.3.9.1 1 set maclock trap Use this command to enable or disable MAC lock trap messaging.
Security Configuration Comman d Set Configuring MAC Locking 14-132 Matrix NSA Series Configuration Guide 14.3.9.12 clear maclock Use this command to clear MAC locking from one or more static MAC addresses. clear maclock { all | mac-addr ess port-string } Synt ax Description Command Default s None.
Security Configuration Command Set Configuring Multiple Authenticatio n Matrix NSA Series Configura tion Guide 14-1 33 14.3.10 Configuring Multiple Authentication About Multiple Authentication When en.
Security Configuration Comman d Set Configuring Multiple Authen tication 14-134 Matrix NSA Series Configuration Guide Purpose T o configure multiple authentication. Commands The commands used to configure multiple authentication are listed below and d escribed in the associated section as shown: • set multiauth mode ( Section 14.
Security Configuration Command Set Configuring Multiple Authenticatio n Matrix NSA Series Configura tion Guide 14-1 35 14.3.10.1 set multiauth mode Use this command to set the system authentic ation mode to use mu ltiple authenticators simultaneously or to strictly adhere to 802.
Security Configuration Comman d Set Configuring Multiple Authen tication 14-136 Matrix NSA Series Configuration Guide 14.3.10.2 clear multiauth mode Use this command to clear the system authentication mode. clear multiauth mode Synt ax Description None.
Security Configuration Command Set Configuring Multiple Authenticatio n Matrix NSA Series Configura tion Guide 14-1 37 14.3.10.3 set multiauth precedence Use this command to set the system’ s multiple authentication administra tive precedence.
Security Configuration Comman d Set Configuring Multiple Authen tication 14-138 Matrix NSA Series Configuration Guide 14.3.10.4 clear multiauth precedence Use this command to clear the system’ s multip le authentication administrative precedence. clear multiauth precedence Synt ax Description None.
Security Configuration Command Set Configuring Multiple Authenticatio n Matrix NSA Series Configura tion Guide 14-1 39 14.3.10.5 show multiauth port Use this command to display multiple authen tication properties for one or more ports. show multiauth port [ port-string ] Synt ax Description Command T ype Switch command.
Security Configuration Comman d Set Configuring Multiple Authen tication 14-140 Matrix NSA Series Configuration Guide 14.3.10.6 set multiauth port Use this command to set mu ltiple authentication propertie s for one or more ports.
Security Configuration Command Set Configuring Multiple Authenticatio n Matrix NSA Series Configura tion Guide 14-1 41 14.3.10.7 clear multiauth port Use this command to clear multiple authen tication properties for one or more ports. clear multiauth port {[ mode ] [ numusers ] port-string } Synt ax Description Command T ype Switch command.
Security Configuration Comman d Set Configuring Multiple Authen tication 14-142 Matrix NSA Series Configuration Guide 14.3.10.8 show multiauth station Use this command to display multiple au thentication station (end user) entries. show multiauth station [ mac addr ess ] [ port port-string ] Synt ax Description Command T ype Switch command.
Security Configuration Command Set Configuring Multiple Authenticatio n Matrix NSA Series Configura tion Guide 14-1 43 14.3.10.9 clear multiauth station Use this command to clear one or more multiple authentica tion station entries. clear multiauth station [ mac addr ess ] port port-string Synt ax Description Command T ype Switch command.
Security Configuration Comman d Set Configuring Multiple Authen tication 14-144 Matrix NSA Series Configuration Guide 14.3.10.10 show mu ltiauth session Use this command to display multip le authentication session entries.
Security Configuration Command Set Configuring Multiple Authenticatio n Matrix NSA Series Configura tion Guide 14-1 45 Example This example shows how to display multiple auth entication session: Matrix(rw)-> show multiauth sessio n Multiple authentication session e ntries --------------------------------- -------- Port : fe.
Security Configuration Comman d Set Configuring Multiple Authen tication 14-146 Matrix NSA Series Configuration Guide 14.3.10.1 1 show multiauth idle-timeout Use this command to display the mu ltiple authentication timeout value for an idle session.
Security Configuration Command Set Configuring Multiple Authenticatio n Matrix NSA Series Configura tion Guide 14-1 47 14.3.10.12 set multiauth idle-timeout Use this command to set the multiple authentic ation timeout value for an idle session.
Security Configuration Comman d Set Configuring Multiple Authen tication 14-148 Matrix NSA Series Configuration Guide 14.3.10.13 clear multiauth idle-timeout Use this command to clear multiple authentication idle-timeout values , for an idle session, back to the default values for one or all authentication type s.
Security Configuration Command Set Configuring Multiple Authenticatio n Matrix NSA Series Configura tion Guide 14-1 49 14.3.10.14 show mult iauth session-timeout Use this command to display mu ltiple authentication session-timeo ut values for an active session.
Security Configuration Comman d Set Configuring Multiple Authen tication 14-150 Matrix NSA Series Configuration Guide 14.3.10.15 set multiauth session-timeout Use this command to set multiple authentication session-timeout values, for an active session.
Security Configuration Command Set Configuring Multiple Authenticatio n Matrix NSA Series Configura tion Guide 14-1 51 14.3.10.16 clear mult iauth session-timeout Use this command to clear multip le authentication session-timeout values, for an active session, back to the default values.
Security Configuration Comman d Set Configuring Secure Shell (SSH) 14-152 Matrix NSA Series Configuration Guide 14.3.1 1 Configuring Se cure Shell (SSH) Purpose T o review , enable, disable, and configure the Secu re Shell (SSH) protoc ol, which provides secure Te l n e t .
Security Configuration Command Set Configuring Secure Shell (SSH) Matrix NSA Series Configura tion Guide 14-1 53 14.3.1 1.1 show ssh st ate Use this command to display the cu rrent status of SSH on the device. show ssh state Synt ax Description None. Command T ype Switch command.
Security Configuration Comman d Set Configuring Secure Shell (SSH) 14-154 Matrix NSA Series Configuration Guide 14.3.1 1.2 set ssh Use this command to enable, disable or reinitialize SSH server on the device. set ssh { enable | disable | reinitialize} Synt ax Description Command T ype Switch command.
Security Configuration Command Set Configuring Secure Shell (SSH) Matrix NSA Series Configura tion Guide 14-1 55 14.3.1 1.3 set ssh hostkey Use this command to set or rein itialize new SSH authentication keys. set ssh hostkey [ reinitialize ] Synt ax Description Command T ype Switch command.
Security Configuration Comman d Set Configuring Secure Shell (SSH) 14-156 Matrix NSA Series Configuration Guide 14.3.1 1.4 show router ssh Use this command to display the st ate of SSH service to the router . show router ssh Synt ax Description None. Command T ype Switch command.
Security Configuration Command Set Configuring Secure Shell (SSH) Matrix NSA Series Configura tion Guide 14-1 57 14.3.1 1.5 set router ssh Use this command to enables or di sable SSH service to the rout er . set router ssh { enable | disable } Synt ax Description Command T ype Switch command.
Security Configuration Comman d Set Configuring Secure Shell (SSH) 14-158 Matrix NSA Series Configuration Guide 14.3.1 1.6 clear ro uter ssh Use this command to reset SSH service to the router to the default state of disabled. clear router ssh Synt ax Description None.
Security Configuration Command Set Configuring Access Lists Matrix NSA Series Configura tion Guide 14-1 59 14.3.12 Configuring Access L ist s Purpose T o review and configure security access contro l lists (ACLs), which permit or deny access to routing interfaces based on protocol and source IP address restrictions.
Security Configuration Comman d Set Configuring Access Lists 14-160 Matrix NSA Series Configuration Guide 14.3.12.1 show access-lists Use this command to display configured IP ac cess lists when operating in router mode. show access-lists [ number ] Synt ax Description Command T ype Router command.
Security Configuration Command Set Configuring Access Lists Matrix NSA Series Configura tion Guide 14-1 61 14.3.12.2 access-list (standard) Use this command to define a standard IP access list by numbe r when op erating in router mode. Restrictions defined by an access list are applied by using the ip ac ces s-group command ( Section 14.
Security Configuration Comman d Set Configuring Access Lists 14-162 Matrix NSA Series Configuration Guide Command Synt ax of the “no” Form The “no” form of this command re moves the defined access list or entry: no access-list access-list-num ber [ entry ] Command T ype Router command.
Security Configuration Command Set Configuring Access Lists Matrix NSA Series Configura tion Guide 14-1 63 This example moves entry 16 to the beginning of ACL 22: Matrix>Router1(config)# access-lis.
Security Configuration Comman d Set Configuring Access Lists 14-164 Matrix NSA Series Configuration Guide 14.3.12.3 access-list (extended) Use this command to define an extended IP acce ss list by number when operating in router mode.
Security Configuration Command Set Configuring Access Lists Matrix NSA Series Configura tion Guide 14-1 65 Synt ax Description access-list-number Specifies an extended access list number .
Security Configuration Comman d Set Configuring Access Lists 14-166 Matrix NSA Series Configuration Guide destination Specifies the network or host to which the packet will be sent. V alid options for e xpressing destination are: • IP address (A.B.C.
Security Configuration Command Set Configuring Access Lists Matrix NSA Series Configura tion Guide 14-1 67 Command Synt ax of the “no” Form The “no” form of this command removes the defined access list or entry: no access-list access-list-number [ entry ] Command T ype Router command.
Security Configuration Comman d Set Configuring Access Lists 14-168 Matrix NSA Series Configuration Guide This example shows how to defi ne access list 102 to deny TCP packets transmitted from any IP source port with a the Dif fServ value set to 55.
Security Configuration Command Set Configuring Access Lists Matrix NSA Series Configura tion Guide 14-1 69 14.3.12.4 ip access-g roup Use this command to apply access restrictions to inbound or outbound fram es on an interface when operating in router mode.
Security Configuration Comman d Set Configuring Policy-Based Routi ng 14-170 Matrix NSA Series Configuration Guide 14.3.13 Configuring Policy-Based Routing About Policy-Based Routing Normally , IP packets are forw arde d according to the route that has been selected by traditional routing protocols, such as RIP and OSPF , or by st atic routes.
Security Configuration Command Set Configuring Policy-Based Routing Matrix NSA Series Configura tion Guide 14-1 71 • ip policy pinger ( Sec tion 14.3 .
Security Configuration Comman d Set Configuring Policy-Based Routi ng 14-172 Matrix NSA Series Configuration Guide 14.3.13.1 show route-map Use this command to displa y a configured route map list for policy-based routing. show route-map id-number Synt ax Description Command T ype Router command.
Security Configuration Command Set Configuring Policy-Based Routing Matrix NSA Series Configura tion Guide 14-1 73 14.3.13.2 route-map Use this command to create a route map for policy- based routing and to enab le policy-based routing configuration mode.
Security Configuration Comman d Set Configuring Policy-Based Routi ng 14-174 Matrix NSA Series Configuration Guide Command Default s • If permit or deny is not specified, this comm and will enable route map or policy based routin g configuration mode.
Security Configuration Command Set Configuring Policy-Based Routing Matrix NSA Series Configura tion Guide 14-1 75 14.3.13.3 match ip ad dress Use this command to match a packet source IP address against a PBR access list. Up to 5 access lists can be matched.
Security Configuration Comman d Set Configuring Policy-Based Routi ng 14-176 Matrix NSA Series Configuration Guide 14.3.13.4 set next hop Use this command to set one or more ne xt hop IP address for packets matching an exte nded access list in a config ured route map.
Security Configuration Command Set Configuring Policy-Based Routing Matrix NSA Series Configura tion Guide 14-1 77 14.3.13.5 sho w ip policy Use this command to display the po licy applied to a routing interface . show ip policy Synt ax Description None.
Security Configuration Comman d Set Configuring Policy-Based Routi ng 14-178 Matrix NSA Series Configuration Guide Pinger Whether PBR next ho p p inging is on or off. Can be turned on and configured us ing the ip policy pinger command as described in Section 14.
Security Configuration Command Set Configuring Policy-Based Routing Matrix NSA Series Configura tion Guide 14-1 79 14.3.13.6 ip p olicy route-map Use this command to assign a rout e map list to a routing interface .
Security Configuration Comman d Set Configuring Policy-Based Routi ng 14-180 Matrix NSA Series Configuration Guide 14.3.13.7 ip policy priority Use this command to prioritize PBR next hop behavior .
Security Configuration Command Set Configuring Policy-Based Routing Matrix NSA Series Configura tion Guide 14-1 81 14.3.13.8 ip policy load-policy Use this command to co nfigure PBR next hop behav ior . When more than one next ho p is configured (using the set next hop command as described in Section 14.
Security Configuration Comman d Set Configuring Policy-Based Routi ng 14-182 Matrix NSA Series Configuration Guide 14.3.13.9 ip policy pinger Use this command to co nfigure behavior for pinging PBR next hops.
Security Configuration Command Set Configuring Denial of Service (DoS) Preven tion Matrix NSA Series Configura tion Guide 14-1 83 14.3.14 Configuring Denial of Service (DoS) Prevention Purpose T o configure Denial of Service (DoS) prevention, which will protect the router from attacks and notify administrators via Syslog .
Security Configuration Comman d Set Configuring Denial of Service (DoS) Prevention 14-184 Matrix NSA Series Configuration Guide 14.3.14.1 show hostdos Use this command to display Denial of Service security status and counters. show hostdos Synt ax Description None, Command T ype Router command.
Security Configuration Command Set Configuring Denial of Service (DoS) Preven tion Matrix NSA Series Configura tion Guide 14-1 85 14.3.14.2 host dos Use this command to enable or disabl e Denial of Service security features.
Security Configuration Comman d Set Configuring Denial of Service (DoS) Prevention 14-186 Matrix NSA Series Configuration Guide Examples This example shows how to globa lly enable land attack and larg.
Security Configuration Command Set Configuring Denial of Service (DoS) Preven tion Matrix NSA Series Configura tion Guide 14-1 87 14.3.14.3 clear hostdos-counters Use this command to clear Denial of Service security counters. clear hostdos-counters Synt ax Description None.
Security Configuration Comman d Set Configuring Flow Setup Throttling (FST) 14-188 Matrix NSA Series Configuration Guide 14.3.15 Configuring Flow Setup Throttling (FST) About FST Flow Setup Throttling (FST) is a proactive feature d esigned to mitigate DoS attacks before the virus can wreak havoc on the network.
Security Configuration Command Set Configuring Flow Setup Throttling (FST) Matrix NSA Series Configura tion Guide 14-1 89 • set flowlimit port ( Section 14.3.15 .8 ) • clear flowlimit port class ( Section 14.3.15.9 ) • set flowlimit shutdown ( Section 14.
Security Configuration Comman d Set Configuring Flow Setup Throttling (FST) 14-190 Matrix NSA Series Configuration Guide 14.3.15.1 show flowlimit Use this command to display fl ow setup throttling information. show flowlimit [ port [ port-string ]] [ stats [ port-string ]] Synt ax Description Command T ype Switch command.
Security Configuration Command Set Configuring Flow Setup Throttling (FST) Matrix NSA Series Configura tion Guide 14-1 91 14.3.15.2 set flowlimit Use this command to globally enab le or disable flow setup throttling. set flowlimit { enable | disable } Synt ax Description Command T ype Switch command.
Security Configuration Comman d Set Configuring Flow Setup Throttling (FST) 14-192 Matrix NSA Series Configuration Guide 14.3.15.3 set flowli mit limit Use this command to set a flow lim it that will trigger an action for a port user classi fication.
Security Configuration Command Set Configuring Flow Setup Throttling (FST) Matrix NSA Series Configura tion Guide 14-1 93 Example This example shows how to set th e flow limit 1 to 12 flows on ports c.
Security Configuration Comman d Set Configuring Flow Setup Throttling (FST) 14-194 Matrix NSA Series Configuration Guide 14.3.15.4 clear flowlimit limit Use this command to remove a flow limit configuration.
Security Configuration Command Set Configuring Flow Setup Throttling (FST) Matrix NSA Series Configura tion Guide 14-1 95 14.3.15.5 set flowlimit action Use this command to associate an action with a flow limit. This is the action that will occur once the associated flow limit is reached.
Security Configuration Comman d Set Configuring Flow Setup Throttling (FST) 14-196 Matrix NSA Series Configuration Guide Command Default s • If action is not specified, no action will be applied. • If classification port type is not specified, none will be applied.
Security Configuration Command Set Configuring Flow Setup Throttling (FST) Matrix NSA Series Configura tion Guide 14-1 97 14.3.15.6 clear flowli mit action Use this command to remove a fl ow limit ing action configuration.
Security Configuration Comman d Set Configuring Flow Setup Throttling (FST) 14-198 Matrix NSA Series Configuration Guide 14.3.15.7 show flowlimit class Use this command to display flow lim iting classification configuration(s).
Security Configuration Command Set Configuring Flow Setup Throttling (FST) Matrix NSA Series Configura tion Guide 14-1 99 Example This example shows how to show flow limits and as sociated actions con.
Security Configuration Comman d Set Configuring Flow Setup Throttling (FST) 14-200 Matrix NSA Series Configuration Guide 14.3.15.8 set flowli mit port Use this command to: • enable or disable flow limiti ng on one or more port(s), • assign a flow limiting user classifica tion to one or more port(s).
Security Configuration Command Set Configuring Flow Setup Throttling (FST) Matrix NSA Series Configura tion Guide 14-2 01 Example This example shows how to assign the user port classification type to Fast Ethernet ports 3-5 in port group 2: Matrix(rw)-> set flowlimit port cl ass userport fe.
Security Configuration Comman d Set Configuring Flow Setup Throttling (FST) 14-202 Matrix NSA Series Configuration Guide 14.3.15.9 clear flowlimit port class Use this command to remove flow lim iting port classif ication properties. clear flowlimit port class [ port-string ] Synt ax Description Command T ype Switch command.
Security Configuration Command Set Configuring Flow Setup Throttling (FST) Matrix NSA Series Configura tion Guide 14-2 03 14.3.15.10 set flowlimit shutdown Use this command to enable or disable the flow lim it shut down functio n. When enabled, this allows ports configured with a “disable” action to shut down.
Security Configuration Comman d Set Configuring Flow Setup Throttling (FST) 14-204 Matrix NSA Series Configuration Guide 14.3.15.1 1 set flowlimit notification Use this command to enable or di sable flow limit notification, or to set a notification interval.
Security Configuration Command Set Configuring Flow Setup Throttling (FST) Matrix NSA Series Configura tion Guide 14-2 05 14.3.15.12 clear flowlimit notification interval Use this command to reset the SNMP flow limit notification interval to th e default value of 120 seconds.
Security Configuration Comman d Set Configuring Flow Setup Throttling (FST) 14-206 Matrix NSA Series Configuration Guide 14.3.15.13 clear flowlimit stat s Use this command to reset flow limiting statistics back to default values on one or more port(s).
Matrix NSA Series Configuration Guide Index-1 Index Numerics 802.1D 6-1 802.1Q 7-1 802.1w 6-1 802.1x 14-12 , 14- 27 A Access Groups 14-169 Access Lists 14-161 to 14-164 Addresses IP, adding to switch .
Index Index-2 M atrix NSA Series Config uration Guide Contexts (SNMP) 5-3 Convergence End Points (CEP) phone detection 14-101 Copying Configuratio n or Image Files 2-1 14 Cost area default 13-51 OSPF .
Index Matrix NSA Series Configuration Guide Index-3 L License key advanced routing 2-90 , 13-2 Line Editing Com mands 2-1 1 , 2-17 Link Aggregatio n (LACP) 4-98 Link Layer Discovery Protocol (LLDP) co.
Index Index-4 M atrix NSA Series Config uration Guide retransmit interval 13-40 timers 13-39 transmit del ay 13-41 virtual links 13-53 , 13-71 P Password aging 2-32 history 2-32 , 2-33 set new 2-29 setting the login 2-29 Path MTU Dis covery Protocol 2-1 19 Phone detection Cisco, Siemens and H.
Index Matrix NSA Series Configuration Guide Index-5 S Scrolling Screens 2-16 Secure Shell (SSH) 14-152 enabling 14-154 regenerating new keys 14-155 Security methods, overview of 14 -1 Serial Port down.
Index Index-6 M atrix NSA Series Config uration Guide egress lists 7-25 enabling GVRP 7- 33 ingress filtering 7-1 1 naming 7-8 reviewing existing 7-3 secure management, creating 7-32 VRRP authenticat .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Enterasys Networks N Standalone (NSA) Series è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Enterasys Networks N Standalone (NSA) Series - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Enterasys Networks N Standalone (NSA) Series imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Enterasys Networks N Standalone (NSA) Series ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Enterasys Networks N Standalone (NSA) Series, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Enterasys Networks N Standalone (NSA) Series.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Enterasys Networks N Standalone (NSA) Series. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Enterasys Networks N Standalone (NSA) Series insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
