Manuale d’uso / di manutenzione del prodotto EAP9550 del fabbricante EnGenius Technologies
Vai alla pagina of 46
EnGenius EAP9550 1 1N Multi-Functi on AP/Repeater.
T able of Co ntent 1. Introductio n ................................................................................................................. 4 1.1. Features and Benef it s ......................................................................
4.6. Logout ............................................................................................................. 44 A ppendix A – FCC Interference S t atement .................................................................... 4 5 A ppendix B – IC Interf erence St atement .
1. Introduction EAP9550 is a powerful and multi-funct ioned 1 1n A ccess Point and it can act three m odes A P/WDS/Universal Repeater . Smoke detector appearance will minimize visibility .
SNMP Remote Conf iguration Man agement Helping admini strators to remotel y configure or ma nage the A cce ss Point easil y QoS (WMM ) support Enhancing us er performa nce and densit y 1.2. Package Content s The p a ckage cont ains the following items.
2. Understanding the H ardware 2.1. Hardware Installat ion 1 Place the unit in an appropriate place af ter cond ucting a site surv ey . 2 Plug one en d of the Ethernet cable in t o the RJ-45 port on the rear p anel of the device and another end into your PC/Notebook .
3. Modes A P/W DS/Universal Repeater 3.1. Access Point In AP (A ccess Point) mode, your device act s as a communication hub for users with a wireless device to connect to a w ired LAN /W AN.
4. W eb Configuration 4.1. System 4.1.1. Operation Mode You are allowed to configure E A P95 50 into different modes: A P, WDS Bridge and Universal Repeater.
• System: Basic information of the de v ice. • WLAN Settings: WL A N channel. • SSID_1: SSID information. 4.1.3. DHCP.
4.1.4. Schedule 4.1.5. Event Log 4.1.6. Monitor The device will record the router trans mission st atus in a time sp an..
Det ail: Click into det ail to see his torical record..
4.2. Wireless 4.2.1. A P 4.2.1.1. S t atus.
4.2.1.2. Basic Radio: To ena b le/dis able w ireless sign al. • Mode: Define A P in different modes. W h en in A P mode, the device works as regular AP, or WDS mode to interlink with other A P devices . . . . You are allowed to set MAC address and encrypti on algorithm ( Please refer t o 4.
• MAC A d dress 1~4: T o specif y MAC address of o ther A P devices. M AC address will only shows when configured in WDS A P mode. • Security : Please refer to 4.
• Data rate: Y o u may select a data rate from the drop-down list, however, it is recommended to select a uto. This is al so known as auto-fal lback. • N Data Rate: You may se lect N data rate from the d rop-d own lis t, however, it is recommende d to select auto.
Encryp tion: WEP • ESSID Selection: A s this device support s mult iple SSIDs, it is possi ble to configure a different securi ty mode for each S S ID (pr ofile). Select an SSI D from the drop-d own li st. • Broadcast SSID : Select Enable or Disable from the drop-down list.
packets are transmitted without encry p tion. Shared Key sends an unenc r ypted challen ge text string to any device attempti ng to communicate w ith the A P. The device requesting authenticatio n encrypts the challenge text and s ends it back to the access point.
• Broadcast SSID : Select Enable or Disable from the drop-down list. This is the S SID broadcast feature. When this option is set to Enable , your wireless netw ork name is broadcast to anyone w ithin the range of your signal . If y ou're not using encry p tion then they could co nnect to y our network.
• ESSID Selection: A s this device support s mult iple SSIDs, it is possi ble to configure a different securi ty mode for each S S ID (pr ofile). Select an SSI D from the drop-d own li st. • Broadcast SSID : Select Enable or Disable from the drop-down list.
4.2.1.6. WPS • WPS : Place a ch eck in this box to ena b le this f eature. • WPS Current Status: Displays the current status of t he W PS con figuration. • Self Pin Co de: Displays the current PI N . • SSID: Display s the curren t SSID. • Authenticati on Mode : Displays t he current authentication m ode.
4.2.1.8. VL A N O nly A vaila ble in A P mode • Virtual LA N: Choose to Enable or Disable the VLA N features. • SSID1 Tag : Specify the VLAN tag..
4.2.1.9. WMM 4.2.2. WDS Bridge Y ou can only connect to the device via Ethernet Port.
4.2.2.1. S t atus 4.2.2.2. Basic • Radio: T o enable/dis able radio f requency . • Mode: W DS mode al lows y ou to i nterlink w ith o ther A P devices. Se tting M A C ad d ress and encrypti on algorithm ( Please refer t o 4.2.1.4 for encry p tion confi g urati on) • Band: Co nfigure the d evice into different wireless mod es.
2.4 GHz (N) 2.4 GHz (B+G) 2.4 GHz (G) 2.4 GHz (B+G+ N) • Channel : You can ma n ually configure a channel to be used. • MAC A d dress 1~4: T o specif y MAC address of o ther A P devices. M AC address will only shows when configured in WDS mode .
alphanumeric characters) format. ASCII format is provided so you can enter a string that is easier to rem ember. • Default Tx K e y : You ma y choose on e of y o ur 4 diff erent WEP k eys from below. • Encry ption Key 1-4: You may enter four different WEP key s.
4.2.2.3. A d va nced • Fragment Thres hold: P ackets over the spe cified size w ill be fragmented in order to improve performance on noisy networks. Specify a value between 256 and 2346.
4.2.2.4. WMM.
4.2.3. Universal Repeater ( A P) 4.2.3.1. S t atus.
4.2.3.2. Basic • Radio: T o enable/dis able radio f requency . • Mode: Univ ersal Rep eater • Band: Co nfigure the d evice into different wireless mod es.
• Enabled S S ID#: The device al lows y ou to hav e 1 unique SSID • ESSID# : Description of each configured S SID • Site Survey : List out all connect ed devices. 4.2.3.3. A d va nced • Fragment Thres hold: P ackets over the spe cified size w ill be fragmented in order to improve performance on noisy networks.
• Preamble Ty pe: S el ect a short or long pr e amble. For optimum p erforman ce it is recommende d to also configure the client device as the same pr eamble type. • CTS P rotect ion: C TS (Clear to Send) can be always en abled, auto, or d isabled.
• ESSID Selection : As this device supports multipl e SSIDs, it is possible to configure a different security mode for each SS I D (profile). Select an SSID from the drop-down li st. • Broadcast SSID: Select Enable or Disable from the drop-do wn list.
• Key Length: Select a 6 4-bit or 128-bit W EP key length fr om the drop- down li st. • Key Type: Select a key ty pe from the drop-down list. 128-bit encry ption require s a longer key than 64-bit encry ption.
connect to your network. When this is d isabled, you must enter the Wireless Network Name (SSID) on the clie nt manually to con nect to t he network. • WMM: Choose to Enable or Disable W MM . This is the Quality of Serv ice (Q oS) feat u re for prioritizing voice and video applications.
4.2.3.6. WPS • WPS : Place a ch eck in this box to ena b le this f eature. • WPS Current Status: Displays the current status of t he W PS con figuration. • Self Pin Co de: Displays the current PI N . • SSID: Display s the curren t SSID. • Authenticati on Mode : Displays t he current authentication m ode.
4.2.3.8. WMM.
4.3. Network 4.3.1. S t atus 4.3.2. L A N • Bridge Type: Sele ct Stati c IP or D ynamic IP from the drop-d own list. If y ou select Static IP, you will b e required to specify an IP address and subnet mask. If Dynamic IP is selected, then the IP ad d ress is received aut omatically from t he external D HCP serv er.
Dynamic Host Configur at ion Protoco l (DHCP ) is a network appli cation protocol used by device s (DHCP clients) to obt ain configuration in f ormation for operation in an In ternet Pro t ocol network. This protocol reduces sy stem administration w ork load, al lowing networks to add devices w ith little or no manual interven tion.
4.4. Management 4.4.1. A dmin Change current login passw ord of the dev ice. It is recomme nde d to change the default password for securit y re asons. 4.4.2. SNMP A llow s y ou to ass ign the cont act det ails, location, communit y name and trap settings for SNMP .
• SNMP A ctive: Choose to enable o r disa ble the S NM P feat ure. • SNMP Versi on: You may select a specifi c version or sel ect Al l from t he drop-do wn list. • Read Community N ame: Specify the password for access the S NMP community for read only access.
4.4.4. Firmware It allows you to upgrade the firmware of t he device in order to improve the functionality and performance . Ensure that yo u have downloa ded the appropriate firmware from the vendor ’ s website. Connect the device to your PC using an Ethernet cable, as the firmware cannot be upgraded wi th wireless interface.
4.5. T ool s 4.5.1. T i me Setting This feature allows you to configure, update, and maintain the correct time on the device’s internal s y st em clock as well as configure the time zone. The date a nd time of the device can be configured ma nually or b y s ynchronizing with a time ser v er.
4.5.2. Power Sa v ing 4.5.3. Diagnosis Check whether a netw ork destination is reachable with ping serv ice..
4.5.4. LED Control 4.6. Logout.
Appendix A – FCC Interference Statement Federal Communication Commissi on Interference St atement This e quipment has been tested and fo und to compl y with the limits for a Class B digital device, p ursuant to Part 15 of the FCC Rules.
Appendix B – IC Int erference S t atement Industry Canada stat e ment: This device complies with RSS-21 0 of the In dustry Ca nada Rules. Operation is subject to the following two conditions: (1) Th.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il EnGenius Technologies EAP9550 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del EnGenius Technologies EAP9550 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso EnGenius Technologies EAP9550 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul EnGenius Technologies EAP9550 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il EnGenius Technologies EAP9550, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del EnGenius Technologies EAP9550.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il EnGenius Technologies EAP9550. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo EnGenius Technologies EAP9550 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
