Manuale d’uso / di manutenzione del prodotto E287348 del fabbricante Elo TouchSystems
Vai alla pagina of 41
T ouchmonitor User Guide 1519L 15.6” LCD Desktop T ouchmonitor 1919L 18.5” LCD Desktop T ouchmonitor (Optional Magnetic St ripe Reader A vailab le).
Elo T ouc h Solutions 15.6” and 18.5” LCD T ouchmonitor Optional Magnetic Stripe Reader User Guide Revision C P/N E356416 Elo T ouch Solutions 1-800-ELOTOUCH www .
C o p y r i g h t © 2 0 12 ELO Touch Solutions. All Rights Reserved . No part of this publicati o n may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into a ny .
Ta b l e o f Contents Chapter 1 Introduction 5 Product Description ....................................................5 Precautions.................................................................5 Chapter 2 Installation and Setup 6 Unpacking Y o ur T ouchmonitor .
C H A P T E R 1 I NTRODUCTION Product Description Y our new 1519/1919L touc hmonitor combines the reliable performa nce of touch technology with the latest advances in LCD display design. This combination of fea t ures cr eates a natural flow of information be t ween a use r and your touc hmonitor .
C H A P T E R 2 I NST ALLA TION AN D S ETUP This chapter discusses how to install the 151 9L/1919L LCD touchmonitor and the driver software. Unpacking Y our T ouchmonitor Check that the fo llowing ite.
Power cable for North Ameri ca models USA/UL Power cabl e Power cabl e f or European m odels Europe/VDE power cable UK power cable Power cable for Japan models Japanese/PSE power cable Adapter/T ermin.
Assembling the stand plate Pushing the stand plate toward the stand untill it is tight, then fasten the stand plate us ing captive screw . 2-8.
Interface Connection Note: Before connectin g the cables to your touchm onitor and P C, be sure that the com puter and touchmonitor ar e turned off. Headphone Cable 1 2 2 3 4 Audio Cable Serial Cable VGA Cable USB Cable Power Brick 1. Connect DC cable of the power brick to the monitor and the other end through AC power cable to the AC outlet.
Magnetic Stripe Reader (MS R ) Interface Connection (optional) If the MSR is insta lled on the monitor , plug the U SB cable from the MSR dire ctly to the PC. No drivers are requ ired to be loaded. T o change the MSR function mode from keyboard em ulation to HID, load the “MSR CHA NGE MODE.
Product Overview TM Main Unit Rear V iew Kens ington Lock The Kensington TM lock is a security device that prevents the ft. T o find out more about thi s se- curity device, go to http://www .
Mounting the Display Y our medically certified touchscreen display conf orms to the VES A Flat Panel Monitor Physical Mounting Int erface (FPMPMI) standard.
Rear Mounting Using t he VES A Interface 1 If the displa y is already connected to a pedestal, re move the four screws that connect th e pedestal to the display (refer to Figur e2-1 , item 1 ). Separate the pedestal from the display . 2 Reinstall t he four screws into the VE SA interface m ount.
Installing the Driver Software E L O T o u c h S o l u t i o n s provides driver software that allow s your touchmo n itor to work w ith your computer .
Installing the Serial T ouch Driver (not applicable to Acoustic Pulse Recognition and Projected-Capacitive monitor) Inst alling the Seri al T ouch Dri ver for W indows 7, W indo w s V ista, Windo ws XP , Windows 2000, 98/95, ME and NT4.0 NOTE: For W indows 2000 and NT4.
Inst alling the Seri al T ouch Driver f or W indows 3.1 a nd MS -DO S Y ou must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue usi ng your mouse along with y our touchmo nitor in DOS .
Installing the USB T ouc h Driver Inst alli ng the U SB T o uch Dri ver for Wi ndows 7, Windows Vist a, Wind ows XP , Windo w s 2000, ME and Windows 98. 1 Inser t the E LO C D-RO M in you r comp uter’ s CD -R OM dri ve. If W indows 2000 or W indows 98 starts the Add New Hardware W izard, do the following: 2 Choose Next .
C H A P T E R 3 O PERA TION About T ouchmonitor Adjustments Y our touchmonitor will not like ly require adjustment. However , variations in video output a nd application m ay require adjustments to the touchmonitor to optimize the quality of the display .
Bottom Pa nel Co ntrols Audio Outp ut SELECT MENU SELECT MENU 5 4 3 2 1 Control Function 1 Menu/Exit Display/Exi ts the OSD menus. 2 1. Enter Luminance of the OSD. 2. Incr ease value of the adjustment item. 3. Move OSD selection upw ard. 3 1. Enter Audi o of th e OSD.
Controls and A djustment On Screen Display (OSD) Menu Functions T o Display and Select the OS D Functions: 1. Press the Menu key to activate the OSD menu. 2. Use or to move upward or downwa rd through the menu. Press the “Select” key , execute the function or enter the sub-m enu.
On Screen Display(OSD) Contr ol Options Control Description Auto-Adjust Select “A uto-Adjust” to ena ble this func t ion. The Auto-Adjust will automatic ally adjust V -Position, H-Position, Cloc k and Phase. Lumi nance . Brig htness Increases or decreases brigh tness .
Preset Modes T o reduce the need for adjustment for dif ferent modes, the monitor has default set ting modes that are most comm only used as given in the table below . If any of these display m od es are detected, the monitor autom ati cally adjusts t he picture size and centering.
Power Management System Power Mode Consumption (12VDC input) On <42W Sl eep <2W Off <1 W It is recommended to swi t ch the monit or of f when it is not in use for a long period of time. NOTE: Complies to VESA Power Management (D PM) standar d s.
Intelli T ouch Plus T ouch T echnology 3-24 When connect ed to W indows 7 computers, the touchmon itor can report 2 simultaneous touches. The IntelliT ouch Plus touc hscreen ca n be re-calibrated to your displayed video i mage, if needed, th rough the Calibrat ion function in the ELO driver c ontrol pane l.
Projected-Capacitive T ouch T echnology When conne cted to W indows 7 computers, the touchmonitor can report 2 simultaneo us touc hes. When connected to Wi ndows XP computers, the touchmonitor reports single touches. No additiona l drivers ar e required for t his technolog y to work, it uses W indows HID drivers.
C H A P T E R 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor , refer to the following table. If the problem pe rsists, please contact your local dealer or the ELO’service center . Solutions to Common Problems Proble m Sugge stion(s) The monitor does not respond 1.
A P P E N D I X A N A TIVE R ESOLUTION The native resol ution of a monitor is the resolut ion level at which the LCD panel is designed to perform best. For the LCD touc hmonitor , the native resolution is 1 366 x 768 for the 15.6 inch and 18.5 inch size.
As an example, a SVGA resolution LCD panel has 800 pixe l s horizontal ly by 600 pixels vertically . Input video is also r epresented by the same terms.
A P P E N D I X B T OUCHMONITOR S AFETY This manual conta i ns informati on that is important for the proper setup and mainten ance of your touchmonit or . Before setting up and power ing on your new touchmonitor , read through this manual, es pecially Chap ter 2 (Installati on), and Cha pt er 3 (Operatio n).
Care and Handling of Y our T o uchmonitor The following tips will help keep your touchm onitor functioning at the optimal level. • T o avoid risk of electric shock, do not disassemble the brick power supply or display un it cabinet. The unit is not user servicea bl e.
A P P E N D I X C T ECHNICAL S PECIFICA TIONS C-31.
T ouchmonitor Specifications Model 1519L LCD D isplay 15.6” TFT Acti ve Matrix Panel Display Size 344.232 (H) x 193.53 6 (V) mm Pixel Pitch 0.252 (H) x 0.
T ouchmonitor Specifications Model 1919L LCD D isplay 18.5” TFT Acti ve Matrix Panel Display Size 409.8 (H) x 230.4 (V) mm Pixel Pitch 0.3 (H) x 0.3 (V) mm Native Resol ution 1366 x 768 Display Mode.
15" LCD Touchmonito r (1519L) Dimensions - - - 235 0 383 0 344.2 = = - =;ti1i 62 5 8 d.Li l l l[j - - a; - /; -1 /; 4 3. 6 I 9" '· 6 I 9 2 6 Mt-11 II !L IlLII 1un · " V'=lll 1 'WI I I - , I 140.
19" LCD Touchmonitor (1919L) Dimensions 409.80 = = = = M 1 7 5 .9 5 179 05 453 92 = = M ro en I ru ru 50.931_ ??111 It = -l = M = = C-35.
R EGULA T OR Y I NFORMA TION I. Electrica l Safet y I nformation: A) Compliance is required with respect to the voltage, frequency , and current requirements indicated on the manufact urer’ s label.
D) General Informa t ion to all Users: This equipment generates, uses and can radiate radio frequency ener gy . If not ins talled and used a ccording to this manual the eq uipment may cause inter ference with radio and television communications.
III. Agency Cert ifications The following certifications have been issued for this m onitor: • Argentina S-Mark • Australia C-T ick • Canada CUL • Canada IC • China CCC ( Asia models only) .
W ARRANTY Except as otherwise stated herein or in an order acknow ledgment delivered to Buyer , Seller warrants to Bu yer that the Product s hall be free of defects in materials a nd workmanship. The warranty for the touchmonitors and components of the product is 3 (three) years.
THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF W ARRANTY . EXCEPT FOR THE EXPRESS W ARRANTY S ET FOR TH A BOVE, SELLER GRANTS NO OTHER W ARRANTIES, EXPRESS OR IMPLIED BY ST A T.
Chec k out Our W ebsite! www .elotouc h.com Get the latest... • Pr oduct information • Specifications • News on upcoming events • Press release • Software drivers • T ouchmonitor Ne wslette r Getting in T ouch with us T o find out more ab out ELO’ s exten sive rang e of touch solutions , visit our website at www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Elo TouchSystems E287348 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Elo TouchSystems E287348 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Elo TouchSystems E287348 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Elo TouchSystems E287348 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Elo TouchSystems E287348, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Elo TouchSystems E287348.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Elo TouchSystems E287348. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Elo TouchSystems E287348 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
