Manuale d’uso / di manutenzione del prodotto HV-3000XG del fabbricante Elmo
Vai alla pagina of 32
VISUAL PRESENTER INSTRUCTION MANUAL Please read this instruction manual carefully before using this Visual Presenter and keep it for future reference..
1 IMPORT ANT SAFEGUARDS Read Instructions – All the safety and operating instructions should be read before the appliance is operated. Retain Instructions – The safety and operating instructions should be retained for future reference. Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
2 Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the product.
3 Use the Visual Presenter under the rated electrical conditions. Do not leave the Presenter under direct sunlight or by heaters, or the Presenter may be discolored, deformed, or damaged. Do not place the Presenter in any humid, dusty, windy or vibrating location.
4 CONTENTS 1. P ART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 8. OSD (On-Screen Display) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Display of the OSD menu and the operation of the mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 OSD menu .
6 1. P ART NAMES AND FUNCTIONS Appearance 1. Stage 2. Column 3. Camera Head 4. Close-up Lens Holder 6. Lighting Arm (L) 7. Front Operation Panel 8. Remote Control Storage Compartment 9. Infrared Sensor 5. Lighting Unit (Attach this holder for normal use.
7 Name Function Reference Page 11 Zoom Buttons To change the image size. 12 Auto Focus Button To focus automatically (One-shot auto focus). Front Operation Panel P.17, P.18 P.15, P.18 11. Zoom Buttons 12. Auto Focus Button Rear Panel AC I N RGB IN RGB OUT ON OFF RS-232C POWER VIDEO OUT USB 0 1 A B C D 13.
8 Name Function Reference Page 16. RGB-out Terminal To output the image when connected to RGB input P.12, P.14 [ RGB OUT ] equipment, such as LCD projector and multi-sync monitor. 17. RGB-in Terminal To output the image from RGB-out Terminal P.14 [ RGB IN ] [RGB OUT] when RGB1 is selected for input.
9 Button Name Function Reference Page 21 POINTER To display the video pointer on the screen. 22 Directions To move the video pointer while it is displayed. 23 PAUSE To make the image pause still. 24 AWB To obtain the white balance automatically. 25 LAMP To turn ON/OFF the upper lighting units.
10 2. WIRELESS REMOTE CONTROL Point the infrared emitting part of the wireless remote control unit at the infrared sensor of the Visual Presenter, located on the top of the column, and press the button for the desired function.
11 4. SETTING UP (1) Raise the column. Raise up the column once, and fall it until it is locked. Note: The lighting arm (L) cannot be independently raised. Note: Unless the column is fully raised up, it may not be locked when it is fallen. (2) Raise the lighting arm (R) unit, and turn the camera head to direct the lens unit to the stage.
12 Connection to the monitor and the projector The Visual Presenter can switch the type of image output by using the In/Out selector switch. Use the In/Out selector switch according to the connection environment.
13 Connection to the S-Video terminal Connect the S-video ouput terminal [S-VIDEO OUTPUT] of the Column of the Presenter and the video-in terminal of other equipment with the supplied S-video cable. Note: The image output from the S-video output terminal [S-VIDEO OUTPUT] is only the Presenter camera image.
14 Terminal arrangement and analog RGB cable connection 1 DSUB 15P shrinking terminal (Male) Presenter side (DSUB 15P) RGB input terminal unit side (BNC) V ideo signal (Red) 2 3 V ideo signal (Blue) 4.
15 When the camera head arm is turned as shown in the right figure, material outside the stage can be photographed. When the camera head unit is set in the horizontal position, wall view, distant view, etc. can be photographed. When the object is far away, open the close-up lens holder to your side.
16 (4) Fall the lighting arm (R) unit, and turn the camera head to the position shown in the right figure (the position with the camera head slightly turned to the rear side panel). Note: The lighting arm (L) cannot be independently fallen. Note: Be sure to return the camera to its original position as shown in the right figure.
17 7. V ARIOUS FUNCTIONS Lighting The lighting for presenting printed matter or other material is standard equipment. Each time the lighting button [LAMP] on the wireless remote control is pressed, the lighting operates in order of the L-side lamp alone lights up the L- and R- side lamps go off the L- and R-side lamps light up.
18 Focus Auto Focus Press the button [AUTO FOCUS] on the front operation panel or the auto focus button [AF] on the wireless remote control, and the auto focus operation will be activated. While the auto focus is in operation, the indication lamp blinks until the object is brought into focus.
19 Remote control Powered Manual Focus To focus on any part of the material, such as 3-D material, press the focus button [NEAR] or [FAR] on the wireless remote control. Reference OSD menu P.22 Note: The auto focus function works up to a height of approx.
20 Pause When the pause button [PAUSE] on the wireless remote control is pressed, the image of the main camera is stored in pause still mode. When the pause button [PAUSE] is pressed again, the pause mode is released.
21 8. OSD (On-Screen Display) Use the following buttons on the mouse for each function: • Left button -----------Each time the mouse is clicked, the pointer and the menu alternately appear and disappear. OSD (On-Screen Display) means the operation menu displayed on the screen ("OSD menu").
Function To turn ON/OFF the upper lighting unit. When the OSD menu is displayed for the first time, the previous setting is maintained. Each time this icon is clicked with the left button of the mouse, the lighting unit is switched in order of two lamps one lamp (left) OFF .
23 Function One-push white balance or manual white balance can be selected. To set the one-push white balance. When the left button of the mouse is clicked, the white balance of the color temperature is fixed. To set the white balance by turning the knob <RED> / <GREEN> / <BLUE> .
24 Cable connection 54321 9876 1 2 3 4 5 6 7 8 9 CD RXD TXD DTR SG DSR RTS CTS RI CD RXD TXD DTR SG DSR RTS CTS RI (CI) 1 2 3 4 5 6 7 8 9 DSUB-9P ( Female) 54321 9876 DSUB-9P ( Female) Presenter side DSUB-9P PC/AT side DSUB-9P 9.
25 RS-232C connector specifications (DSUB-9P) Pin No. 1 2 3 4 5 6 7 8 Code CD RXD TXD DTR SG DSR RTS CTS Name Carrier Detect Received Data Transmitted Data Data Terminal Ready Signal Ground Data Set R.
T able of the communication commands Function Command Parameter Data Comments Auto Focus 0 + (NEAR) – (FAR) 0 (STOP) + (TELE) – (WIDE) 0 (STOP) 0 (OFF) 1 (1 lamp) 2 ( 2 lamps ) 0 (COLOR) 1 (B&W) + (OPEN) – (CLOSE) 0 (STOP) 1 (NORMAL) AF FO ZO IR PL CB Command to execute the one-shot auto focus.
27 Function Command Parameter Data Comments 0 DF Default Command to reset to the initialized mode. 0 2 0 QS QR 0 (OFF) 1 (ON) SA 0 (OFF) 1 (ON) SC Status request Command to inquire the status of the equipment. ROM version Command to refer to the ROM version.
28 If the trouble still remains after checking the above, consult your dealer or an authorized ELMO service center. 10. TROUBLESHOOTING HINTS Symptom Possible cause/countermeasure No image on the screen • Cable is not properly connected to the video-in terminal of monitor.
29 Camera Item Specifications Lens f=5.8-58mm (10-time zoom) F2.8 Shooting area 340mm x 252mm (13.4 X 9.9 in.) max., 37mm x 28mm (1.5 X 1.1 in.) min. Limit of focus adjustment At the range of stage surface~150mm (5.9 in.) from the stage surface. 0.5m (20 in.
30 Lighting Supplied accessories Note: The specifications are subject to change without notice. Dimensions and weight are approximate. Trademark Acknowledgements XGA is a registered trademark of International Business Machines. VESA is a registered trademark of Video Electronics Standards Association.
W ARNING: Unauthorized recording of copyrighted slide films, materials, photographs, etc. may infringe on the rights of copyright owners and be contrary to copyright laws. ELMO CO., L TD. 6-14, Meizen-cho, Mizuho-ku, Nagoya, 467-8567, Japan OVERSEAS SUBSIDIARY COMP ANIES U.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Elmo HV-3000XG è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Elmo HV-3000XG - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Elmo HV-3000XG imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Elmo HV-3000XG ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Elmo HV-3000XG, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Elmo HV-3000XG.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Elmo HV-3000XG. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Elmo HV-3000XG insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
