Manuale d’uso / di manutenzione del prodotto 310108 del fabbricante Aleratec
Vai alla pagina of 38
USER GUIDE Aleratec DVD/CD Flash Copy Tower™ Part No. 310108.
www .aleratec.com Copyright/Model Identication The content of this manual is for informational purposes only and is subject to change without notice.
www .aleratec.com Radio/TV Interference Statement The equipment described in this guide emits radio frequency energy . If it is not installed in accordance with the manufacturer ’ s instructions, it may cause interference with radio or television reception.
www .aleratec.com CAUTION As the laser beam in these DVD/CD Flash Copy T ower is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to authorized personnel only . The use of optical instruments with this product will increase eye hazard.
www .aleratec.com Table of Contents Introduction ................................................................................................... 1 Product Features ...................................................................................
www .aleratec.com.
www .aleratec.com 1 Introduction Thank you for purchasing the Aleratec DVD/CD Flash Copy T ower . Please read this User Guide thoroughly before using this product. Product Features The DVD/CD Flash Copy T ower is a Memory Card/USB ash drive to disc copier .
www .aleratec.com 2 Introduction Key Items Note: Choose a Good Location 1. Allow adequate clearance for moving parts. 2. Do not place near heat sour ces such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock.
www .aleratec.com 3 Introduction Function List Function Sub-function Description 1. Copy 1.1 Memory Card to Disc Copy one Memory Card to DVD/CD disc 1.2 USB to Disc Copy USB ash drive to DVD/CD disc 1.3 Disc to Disc DVD to DVD copy CD to CD copy 2.
www .aleratec.com 4 Introduction Note: Flash media (Memory Card and USB) will be r ecognized by the DVD/CD Flash Copy T ower only when the format is FA T 12, 16, or 32. Note: Use only one source at a time. ONL Y ONE Memory Card or ONL Y ONE USB flash drive may be plugged in at a time.
www .aleratec.com 5 Precautions Before installing your DVD/CD Flash Copy T ower , please read the following. Installation A void placing the DVD/CD Flash Copy T ower in a location subject to: • High.
www .aleratec.com 6 Overview Main Menu There are 5 main menu items that will display in the DVD/CD Flash Copy T ower Display Panel. These are: 1. 2. 3.
www .aleratec.com 7 Overview Subfunctions The main menu “Copy” function has 3 subfunctions. These are: The main menu “Compare” function has 3 subfunctions. These are: 1.1 Memory Card to Disc 1.2 USB to Disc 1.3 Disc to Disc 1. Copy 2.1 Memory Card to Disc 2.
www .aleratec.com 8 Overview Subfunctions - continued The main menu “Information” function has 5 subfunctions. These are: The main menu “Utility” function has 2 subfunction. These are: 3.1 Memory Card Info 3.2 USB Info 3.3 Disc Info 3.4 Drive Info 3.
www .aleratec.com 9 Overview The main menu “Set Up” function has 7 subfunctions. These are: 5.1 Copy + Compare 5.2 Multi-Session 5.3 Disc Spanning 5.
www .aleratec.com 10 Using the DVD/CD Flash Copy Tower Checking the Device Information Before copying, it is recommended that you check each Memory Card, USB, or DVD/CD’ s content information. Checking Memory Card Information 1. Select 3.Information , → Select 1.
www .aleratec.com 11 Using the DVD/CD Flash Copy Tower Checking Disc Information 1. Select 3.Information , → Select 3.Discinfo → Press OK → The DVD/CD Flash Copy T ower will show the information of this Disc. DiscSpanningDiscInformation: If the disc was copied from Disc Spanning you will see the disc sequence.
www .aleratec.com 12 Using the DVD/CD Flash Copy Tower Disc Spanning T o use Disc Spanning go to Setup and enable Disc Spanning. When you want to copy a Memory Card which has a content size bigger than a disc, the DVD/CD Flash Copy T ower will automatically estimate the number of blank discs required for the job and execute Disc Spanning.
www .aleratec.com 13 Using the DVD/CD Flash Copy Tower Note: Keep disc type consistent when using Disc Spanning. For example, if you place a CD-R as the first disc for copying, do not place a DVD-R or DVD+R to continue copying. The DVD/CD Flash Copy T ower will show an error message and ask for another blank CD-R.
www .aleratec.com 14 Using the DVD/CD Flash Copy Tower Function Overview: 1. Copy Memory Card to Disc 1. Insert a Memory Card (e.g.. SD, MS) and place a blank DVD or CD disc into the burner . 2. Select 1.Copy , → Select 1.M-CardtoDisc → Press OK → The DVD/CD Flash Copy T ower will begin copying.
www .aleratec.com 15 Using the DVD/CD Flash Copy Tower USB to Disc 1. Insert a USB ash drive and place a blank DVD or CD disc into the burner . 2. Select 1.Copy , → Select 2.USBtoDisc → Press OK → The DVD/CD Flash Copy T ower will begin copying.
www .aleratec.com 16 Using the DVD/CD Flash Copy Tower Disc to Disc This function allows you to copy DVD to DVD(s) and CD to CD(s). Note: CD will copy only to CD . DVD will only copy to DVD . 1. Place your source disc into a Reader, and blank discs into Writers.
www .aleratec.com 17 Using the DVD/CD Flash Copy Tower Function Overview: 2. Compare When “Copy” is completed, the “Compare” function allows you to preform a bit-by- bit comparison of the source media to the completed disc copy . Memory Card to Disc Compar e 1.
www .aleratec.com 18 Using the DVD/CD Flash Copy Tower USB to Disc Compare 1. Insert a USB ash drive and place a nish burner DVD or CD disc into the DVD/CD Flash Copy T ower . 2. Select 2.Compare , → Select 2.USBtoDisc → Press OK → The DVD/CD Flash Copy T ower will begin comparison.
www .aleratec.com 19 Using the DVD/CD Flash Copy Tower Disc to Disc Compare 1. Place the source disc and copied disc into the Reader and W riters. 2. Select 2.Compare , → Select 3.DisctoDisc → Press OK → The DVD/CD Flash Copy T ower will begin comparison.
www .aleratec.com 20 Using the DVD/CD Flash Copy Tower Function Overview: 3. Information Memory Card Information 1. Insert a Memory Card into the DVD/CD Flash Copy T ower . 2. Select 3.Information , → Select 1.M-Cardinfo → Press OK → The DVD/CD Flash Copy T ower will show the information of this Memory Card.
www .aleratec.com 21 Using the DVD/CD Flash Copy Tower Disc Information 1. Insert a disc into the DVD/CD Flash Copy T ower . 2. Select 3.Information , → Select 3.Discinfo → Press OK → The DVD/CD Flash Copy T ower will show the information of this Disc.
www .aleratec.com 22 Using the DVD/CD Flash Copy Tower Function Overview: 4. Utility System Update The DVD/CD Flash Copy T ower can use a USB ash drive drive to update the system rmware. 1. Download / Copy the updated System Firmware to a USB ash drive.
www .aleratec.com 23 Using the DVD/CD Flash Copy Tower Function Overview: 5. Setup Copy+Compare 1. Y ou can change the COPY function in the main menu to COPY+COMP ARE by enabling this function. 2. Select 5.Setup → Select 41.Copy+Compare → Select Enable → Press OK → Copy mode will now be changed to Copy+Compare.
www .aleratec.com 24 Using the DVD/CD Flash Copy Tower Advanced Setup DVD/CD Spare Size (Blu-ray not supported) Because the outside area of each DVD, CD is more difcult to write data to, you can use this function to set a spare area size on each DVD, CD.
www .aleratec.com 25 Specications Model DVD/CD Flash Copy T ower Operation Stand Alone Function • DVD copy to DVD • CD copy to CD • Memory Card copy to DVD/CD disc • USB ash drive copy t.
www .aleratec.com 26 Technical Support After reading this User Guide, if you need additional assistance with this product, please contact Aleratec T echnical Support. Our technical staff will be happy to assist you, but they may need your help to better assist you.
www .aleratec.com 27.
www .aleratec.com 28.
www .aleratec.com 29.
www .aleratec.com 30 Technical Support FAX Back Form Aleratec, Inc. Technical Support Fax Back Form Please record the following information to help expedite any warranty claim: Model No.
www .aleratec.com Notes:.
Document Number: 9399056_ENG_Rev . F Copyright © 2013 Specifications subject to change without notice . Aleratec , Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Aleratec 310108 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Aleratec 310108 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Aleratec 310108 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Aleratec 310108 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Aleratec 310108, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Aleratec 310108.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Aleratec 310108. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Aleratec 310108 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
