Manuale d’uso / di manutenzione del prodotto Exten-A-Kut II del fabbricante Alamo
Vai alla pagina of 142
©2009 Alamo Group Inc. EXTEN-A-KUT II Published 03/09 Part NO. 029691 1 1C OPERA T OR’S MANUAL ALAMO INDUSTRIAL Post Office Box 549 Seguin, T exas 78156 830-372-3551 Email: parts@alamo-industrial.
T o the Owner/Operator/Dealer All implement s with moving part s are potentially hazardous . There is no substitute for a cautio us , safe-minded operator who recognizes the potential hazards and follows reasonab le safety practices.
T able Of Content s SAFETY SECTION ........ ................................. .......................................................... ........... 1- 1 General Safety Instructions and P ractices ................ ................ ................ ...
Operating Speed and Ground Speed .... ... ... ... .... ... ... ... ... .... ... ... ... .... ... ................ ... ... .... ... ................ ... ............. 3-31 Shutting Down the Implement ......... ................ ................ ........
In order to reduce accidents and enha nce the safe operation of mowers, Alamo Industrial, in cooperation with other industry manufacturers has developed the AEM/FEMA I ndustrial and Agri cultural Mower Safety Practices video and guide book.
Alamo Industrial Division is willing to provide one (1) AEM Mower Safety Practices V ideo Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator Sa.
Safety Section 1-1 ©2009 Alamo G roup Inc. SAFETY SECTION.
SAFETY EK-II 03/09 Safety Section 1-2 ©2009 Alamo Group Inc. SAFETY General Safety Instruct ions and Practices A careful operator is the best opera tor .
SAFETY EK-II 03/09 Safety Section 1-3 ©2009 Alamo Group Inc. SAFETY Operator Safety Instr uctions and Practices Battery posts, ter minals and related accessories con tain lead and lead compoun ds, chemicals known to the state of California to cause cancer , birth defects or other reproductive har m.
SAFETY EK-II 03/09 Safety Section 1-4 ©2009 Alamo Group Inc. SAFETY NEVER use drugs or alco hol immediately before or while operating the T ractor and Implement. Drugs and alcohol will affect an operator’s alertness and coordination and theref ore af fect the operator ’s ability to operate the equipment safely .
SAFETY EK-II 03/09 Safety Section 1-5 ©2009 Alamo Group Inc. SAFETY Connecting & Disconnecting Implement Safety Instructio ns & Practices Never crawl un der a raised Implement supported sole ly by the Tractor 3-Point hitch. Release of the control lever or mechanical failure will result in the Implement falling and possible injury or death.
SAFETY EK-II 03/09 Safety Section 1-6 ©2009 Alamo Group Inc. SAFETY Wh en a tt ac hi ng th e I mp l emen t i npu t d r i ve li ne t o th e T rac t or PTO , it i s i mpor t an t th a t th e connecting yo ke spring a ctivated lockin g collar slides freely and the locking balls are seated securely in the gr oove on the T ractor PTO sha ft.
SAFETY EK-II 03/09 Safety Section 1-7 ©2009 Alamo Group Inc. SAFETY Equipment Operation Safety Instructions and Practices Never leave the T ractor and Implement unattended while the Implement is in the lifted position. Accidental operation of lif ting leve r or a hydraulic failure may cause su dden drop of unit with injury or death by crushing.
SAFETY EK-II 03/09 Safety Section 1-8 ©2009 Alamo Group Inc. SAFETY Do not back up this impleme nt when the boom or mower head is extended. Backing could damage the machine or its components.
SAFETY EK-II 03/09 Safety Section 1-9 ©2009 Alamo Group Inc. SAFETY Fl a il M owers are capa bl e un d er a d verse con diti ons o f th row i ngo bj ec t s for great dist ances (100 yards or mo re) and causing seriousinj ury or death. Follow safety messages carefully .
SAFETY EK-II 03/09 Safety Section 1-10 ©2009 Alamo Group Inc. SAFETY Do not mount or di smount the T ractor while the tractor is moving . Mount the T ractor only when the T ractor and all moving p arts are completely stopped. (SG-12) S t art tractor only when properly seated in the T ractor seat.
SAFETY EK-II 03/09 Safety Section 1-11 ©2009 Alamo Group Inc. SAFETY Do Not operate this eq uipmen t in areas wher e in se ct s such as bees may attack you a nd/or cause you to lose contro l of the equipm ent. If you must enter in such areas, use a tractor with an enclosed Cab and close the windows to pr even t insects from entering.
SAFETY EK-II 03/09 Safety Section 1-12 ©2009 Alamo Group Inc. SAFETY M ow a t th e spee d th a t you can sa f e l y opera t e an d con t ro l th e t rac t or an d mower . Th e correct mowing spee d depends on terrain cond ition and grass type, density , and height of cut.
SAFETY EK-II 03/09 Safety Section 1-13 ©2009 Alamo Group Inc. SAFETY Maintenance and Service Safet y Instructions and Practices Do not turn so sharp or lif t mo wer so high to produce a severe ".
SAFETY EK-II 03/09 Safety Section 1-14 ©2009 Alamo Group Inc. SAFETY DO NOT allow any person under a raised boom or mower head unless it is securely locked up or supported. DO NOT approach the Implement unless the T ractor is turned of f and all motion has ceased.
SAFETY EK-II 03/09 Safety Section 1-15 ©2009 Alamo Group Inc. SAFETY Do Not fill fuel tank while engine is running. Refuel only after engi ne has cooled down. If fuel is spilled, move machine away from the area of the sp ill and avoid creating any source of ignition until the gasolin e has evaporated.
SAFETY EK-II 03/09 Safety Section 1-16 ©2009 Alamo Group Inc. SAFETY T ransporting Safety Inst ructions and Practices Secure the boom and mower h ead in the trans port p osition before traveling on public roads. Never transpor t on public roads with th e boom and mower head extended.
SAFETY EK-II 03/09 Safety Section 1-17 ©2009 Alamo Group Inc. SAFETY S torage and Parking Safety Instructions and Practices Make cert ain that the “Slow Moving V ehicle” (SMV) sign is inst alled in such a wa y as to be clearly vis ible and leg ible.
SAFETY EK-II 03/09 Safety Section 1-18 ©2009 Alamo Group Inc. SAFETY Concluding Safety Inst ructions and Prac tices T o p revent tippin g of Implemen t when stored in folded position, use carrying wheels or adequate st a nds on center frame.
SAFETY EK-II 03/09 Safety Section 1-19 ©2009 Alamo Group Inc. SAFETY Decal Location NOTE: Alamo Industrial su pplies safety decals on this product to promote safe operation.
SAFETY EK-II 03/09 Safety Section 1-20 ©2009 Alamo Group Inc. SAFETY ITEM P ART NO. QTY . TYPE DESCRIPTION 1. D389 1 DANGER Multi-Hazard 2. 02962765 1 DANGER Multi-Hazard 3. 02964509 1 DANGER S torage 4. 0297061 1 2 LOGO Exten-A-Ku t 5. 02965093 1 INSTRUCT Proper Engine Operat ion 6.
SAFETY EK-II 03/09 Safety Section 1-21 ©2009 Alamo Group Inc. SAFETY Decal Description Multi Hazard Decal Sheet P/N D389 Decal D3 89 consist s of the following multi-hazards.
SAFETY EK-II 03/09 Safety Section 1-22 ©2009 Alamo Group Inc. SAFETY DANGER! Crushing and Pinch Point s. Moving machiney p arts can pinch or crush or fall- which may cause injury or death.
SAFETY EK-II 03/09 Safety Section 1-23 ©2009 Alamo Group Inc. SAFETY W ARNING! Failure to INSPECT and REP AIR or REPLACE Hoses may allow worn Hoses t o rupture SUDDENL Y and VIOLENTL Y with resulting serious BODIL Y INJURY from SCALDING or FIRE with resulting BURN INJURY or DEA TH.
SAFETY EK-II 03/09 Safety Section 1-24 ©2009 Alamo Group Inc. SAFETY W ARNING! Avoid Bodily Injury , Use 540RPM PTO S peed Only . P/N D103 W ARNING! Avoid Bodily Injur y , Use 1000 RPM PTO S peed Only . P/N D1 14 Name LOG O - Alamo In dustrial P/N 00757140 DANGER! - Multi-Hazard Boom.
SAFETY EK-II 03/09 Safety Section 1-25 ©2009 Alamo Group Inc. SAFETY IMPORT ANT - Service Hy draulic System with Universal T ractor Hydraulic Oil. P/N D416 Name LOG O - Alamo In dustrial P/N 00757139 IMPORT ANT - Use o nly Genuine Ala mo Industrial replacement p arts.
SAFETY EK-II 03/09 Safety Section 1-26 ©2009 Alamo Group Inc. SAFETY IMPORT ANT! Always replace blades in pairs. P/N D395 W ARNING! Pinch Points P/N 02962764 Information that Grease Fitting is present and must apply grease. P/N 000678 Slow Moving V ehicle Decal.
SAFETY EK-II 03/09 Safety Section 1-27 ©2009 Alamo Group Inc. SAFETY Read Operato r ’s Manual! The operator’s manual is located inside this canister .
SAFETY EK-II 03/09 Safety Section 1-28 ©2009 Alamo Group Inc. SAFETY Federal Laws and Regulations This section is intend ed to explain in broa d terms the concep t and effect of federal laws and reg ulations concerning emplo yer and employee equ ipment operat ors.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Introduction Section 4-1 ©2009 Alamo Group Inc. INTRODUCTION SECTION.
INTRODUCTION EK-II 03/09 Introduction Section 4-2 ©2009 Alamo Group Inc. INTRODUCTION This Rotary Mower is designed with care and built with quality materials by skilled work ers. Proper assem- bly , maintenance, and operating practices, as described in th is manual, will help t he owner/operator get years of satisfactory service from the machine.
INTRODUCTION EK-II 03/09 Introduction Section 4-3 ©2009 Alamo Group Inc. INTRODUCTION Y our Exten-A-Kut mower is designed for mowing pond embankments, weeds, an d grass or other agricul- tural applications that may apply . W ith a reasonable amou nt of preventive main tenance, your Mower will provide years of depen dable service.
INTRODUCTION EK-II 03/09 Introduction Section 4-4 ©2009 Alamo Group Inc. INTRODUCTION A TTENTION OWNER/OPERA T OR BEFORE OPERA TING THIS MACHINE: 1. Carefully read th e Operator ’s Manua l, complete ly underst and the Safety Messages and instructions, and know how to operate co rrectly both the tractor and Mo wer .
Assembly Section 4-1 ©2009 Alamo Group Inc. ASSEMBL Y SECTION.
ASSEMBLY EK II 03/09 Assembly Section 4-2 ©2009 Alamo Group Inc. ASSEMBL Y GENERAL ASSEMBL Y T o help you assemble your new DB150 and mo unt it to your tractor , we provide you with drawings, instructions and gene ral information. When needed, you can get informa tion or clarification from Rhino Customer Service.
ASSEMBLY EK II 03/09 Assembly Section 4-3 ©2009 Alamo Group Inc. ASSEMBL Y The tools you will need at the assembly s ite are as follows: 1. Impact wrench or socke t and ratchet set. 2. Rubber mallet. 3. Box-end, Allen, and ad justable wrenches. 4. Alignment pins.
ASSEMBLY EK II 03/09 Assembly Section 4-4 ©2009 Alamo Group Inc. ASSEMBL Y TRACTOR PREP ARA TION 1. Add front end weights as requir ed to maintain enough weight on front wheels for safe steering. Failure to add the required front end weight can cause tractor to re ar up which can cause equipment damage and bodily injury .
ASSEMBLY EK II 03/09 Assembly Section 4-5 ©2009 Alamo Group Inc. ASSEMBL Y.
ASSEMBLY EK II 03/09 Assembly Section 4-6 ©2009 Alamo Group Inc. ASSEMBL Y HEAD A TT ACHMENT Align the Mainframe with the Mower Hea d, insert the Main Head Pin and retain with bolt and locknut. Attach the Linkage with bushings and ret ain with the bolts and locknut s.
ASSEMBLY EK II 03/09 Assembly Section 4-7 ©2009 Alamo Group Inc. ASSEMBL Y Adjust the T ilt Cylinder Clevi s until it lines up with the Lift Link Weld ment, retain with T ilt Cylinder greasable Pin.
ASSEMBLY EK II 03/09 Assembly Section 4-8 ©2009 Alamo Group Inc. ASSEMBL Y T o avoid Hydraulic C ontamination, always keep all hoses and hy draulic fittings capp ed until they are ready to be installed.
ASSEMBLY EK II 03/09 Assembly Section 4-9 ©2009 Alamo Group Inc. ASSEMBL Y Oil Reservoir is shipped filled wit h oil to the minimum level. Wh en adding hydrau lic oil proceed. 1 . Remove the Filler Cap Weldment. FIGURE Asm-B-0007. 2. Avoid hydraulic cont amination by filtering the hydraulic oil while filling the hydraulic tank.
ASSEMBLY EK II 03/09 Assembly Section 4-10 ©2009 Alamo Group Inc. ASSEMBL Y 4 . Fill the Hydraulic Reservoir until the fluid is visible thr ough the si ght gauge. FIGURE Asm-B-0010 & Asm-B-001 1. 5. Fill the Suction Hose with hydraulic fluid and re-install on Hydraulic T ank.
Operation Section 3-1 ©2009 Alamo G roup Inc. OPERA TION SECTION.
OPERATION EK II 03/09 Operation Section 3-2 ©2009 Alamo Group Inc. OPERA TION ALAMO INDUSTRIAL DITCH AND BAN K MOWER OPER A TING INSTRUCTIONS The Alamo Industrial Ditch and Bank Mowers are manufactured with quality material by skilled workers.
OPERATION EK II 03/09 Operation Section 3-3 ©2009 Alamo G roup Inc. OPERA TION 1. St andard Equipment and Specifications EK II Cutting Width 60” Cutting Height Range Dependent Upon 3-pt.
OPERATION EK II 03/09 Operation Section 3-4 ©2009 Alamo Group Inc. OPERA TION 2.OPERA TOR REQUIREMENTS Safe operation of the unit is the responsibility of a qualifi ed operator .
OPERATION EK II 03/09 Operation Section 3-5 ©2009 Alamo G roup Inc. OPERA TION 3.TRACT OR REQUIREMENTS In addition to tractor horsepower an d size required to operate the boom unit, the tractor must .
OPERATION EK II 03/09 Operation Section 3-6 ©2009 Alamo Group Inc. OPERA TION 3.4 3-Point Hitch The tractor 3- point hitch must be rated to lif t at least 2140 lbs. The EK II boom mower is designed to be mounted on a tr actor with a CA T I or II 3-point hitch.
OPERATION EK II 03/09 Operation Section 3-7 ©2009 Alamo G roup Inc. OPERA TION DO NOT use a PTO adapter to attach a non-matching Implem ent driveline to a T ractor PTO. Use of an a dapter can double the opera ting speed of the Implement resulting in excessive vibration, thrown objects, and bl ade and implement failure.
OPERATION EK II 03/09 Operation Section 3-8 ©2009 Alamo Group Inc. OPERA TION Never allow children or other persons to ride on the T ractor or Implement. Falling off can result in serious injury or death. (SG-1 0) Do not mount or di smount the T ractor while the tractor is moving .
OPERATION EK II 03/09 Operation Section 3-9 ©2009 Alamo G roup Inc. OPERA TION 5.ST ARTING THE TRACT OR The operat or must have a complete und erstanding of the p lacement, fun ction, and op erational us e of all tractor cont rols before starting the tractor .
OPERATION EK II 03/09 Ope ration Section 3-10 ©2009 Alamo Group Inc. OPERA TION Never stan d or allow another p erson to stand be tween a running T r actor and the Mower when attaching the Imp leme nt to th e Tractor . Always shut the T ractor completely off before attempting to connect the Mowe r pins to the T ractor hitch.
OPERATION EK II 03/09 Ope ration Section 3-11 ©2009 Alamo G roup Inc. OPERA TION 7.1 Setting Boom Mower Height 1. Park the tractor an d boom mower on leve l ground. 2. Shut down the tractor and re move the key . 3. Level the bo om mower from front to rear by extending or retracting the 3-point top link.
OPERATION EK II 03/09 Ope ration Section 3-12 ©2009 Alamo Group Inc. OPERA TION 8.1 Driveline Length Check Raise mower and watch the Driveline as it approaches the color ed tape. If the dista nce between colo red tape and the end of the outer shield tube is 2" or less, Drive Tubes should be shortened per figure Op-10.
OPERATION EK II 03/09 Ope ration Section 3-13 ©2009 Alamo G roup Inc. OPERA TION 9.PRE-OPERA TION INSPECTION AND SER VICE Before each use, a pre-ope ration inspection and se rvice of the implement and tractor must be performed.
OPERATION EK II 03/09 Ope ration Section 3-14 ©2009 Alamo Group Inc. OPERA TION 9.1 T ractor Pre-Operation Inspection/Service Refer to the tr actor operator’s manual to ensure a complete pre-operation inspection and scheduled service is performed accordi ng to the manufacturers recommenda tions.
OPERATION EK II 03/09 Ope ration Section 3-15 ©2009 Alamo G roup Inc. OPERA TION Rotary Mower PRE-OPERA TION Inspection Mower ID# ________________ Make ____________________ Date: ________________ Shi.
OPERATION EK II 03/09 Ope ration Section 3-16 ©2009 Alamo Group Inc. OPERA TION T ractor PRE-OPERA TION Inspection Mower ID# ________________ Make ____________________ Date: ________________ Shift __.
OPERATION EK II 03/09 Ope ration Section 3-17 ©2009 Alamo G roup Inc. OPERA TION The operator’s manual and safety signs af fixed on the unit contain important instru ctions on the saf e and proper use of the equipme nt.
OPERATION EK II 03/09 Ope ration Section 3-18 ©2009 Alamo Group Inc. OPERA TION Never Leave the mower unattended wh ile the head is in the raised position. The mower co uld fall causing serious injury to anyon e who might inadvertently be under the mower .
OPERATION EK II 03/09 Ope ration Section 3-19 ©2009 Alamo G roup Inc. OPERA TION Do not operate this Equ ipment with hy draulic oil or fuel leaking. Oil and fuel are explosive and the ir presence could present a ha zard.
OPERATION EK II 03/09 Ope ration Section 3-20 ©2009 Alamo Group Inc. OPERA TION • Inspect blades and blade bo lts for looseness and excessive wear . Make sure the mower is securely blocked up before crawling beneath. Replace damaged, worn an d missing blades as complete sets to maint a in rotary balance during operation.
OPERATION EK II 03/09 Ope ration Section 3-21 ©2009 Alamo G roup Inc. OPERA TION Inspect the Blades daily for abnormal wear . REPLACE BOTH BLAD ES on that carrier IMMEDIA TEL Y if either blade has: .
OPERATION EK II 03/09 Ope ration Section 3-22 ©2009 Alamo Group Inc. OPERA TION 9.4 Blade Bolt Inspection Inspect Blade Bolt Head da ily for wear as followed: Inspect the Blade Bolt Heads d aily for abn ormal wear .
OPERATION EK II 03/09 Ope ration Section 3-23 ©2009 Alamo G roup Inc. OPERA TION 10 . DRIVING THE TRACTOR AND IMPLEMENT Safe tractor transport r equires the operator to po ssess a thorough knowledge of the m odel being operated and precaution s to take while driving with an at tached implement.
OPERATION EK II 03/09 Ope ration Section 3-24 ©2009 Alamo Group Inc. OPERA TION T ransport on ly at speeds where you can maintain con trol of the equipment.
OPERATION EK II 03/09 Ope ration Section 3-25 ©2009 Alamo G roup Inc. OPERA TION 10.3 Driveline Angle Problems Due to the shape or contour of th e area being mo wed, it may be necessary to r aise tractor 3 pt. causing severe angle in the main drive line.
OPERATION EK II 03/09 Ope ration Section 3-26 ©2009 Alamo Group Inc. OPERA TION Do not adjust 3 pt. links so as to cause a ground cleara nce pr oblem on the reservoir end.
OPERATION EK II 03/09 Ope ration Section 3-27 ©2009 Alamo G roup Inc. OPERA TION 10.4 Driving the T ractor and Bo om S t art off driving at a slo w speed and gradually increase your speed while maintainin g comple te control of the tractor .
OPERATION EK II 03/09 Ope ration Section 3-28 ©2009 Alamo Group Inc. OPERA TION OPERA TING INSTRUCTIONS Engage the PT O shaft at low engine RPM and speed the engine up after blades are fully e ngaged. Never engage the PT O shaf t at a high engine RPM .
OPERATION EK II 03/09 Ope ration Section 3-29 ©2009 Alamo G roup Inc. OPERA TION Extremely ta ll grass should be cut twice. Raise m ower and cut twice th e desired height. Cut the second tim e at desired height at 90 degrees to first pa ss. Remember , sharp blades produce cleaner cut s and use less power .
OPERATION EK II 03/09 Ope ration Section 3-30 ©2009 Alamo Group Inc. OPERA TION The second handle on th e contr ol valve actuates th e T ilt Cylinder .
OPERATION EK II 03/09 Ope ration Section 3-31 ©2009 Alamo G roup Inc. OPERA TION M ow a t th e spee d th a t you can sa f e l y opera t e an d con t ro l th e t rac t or an d mower . Th e correct mowing spee d depends on terrain cond ition and grass type, density , and height of cut.
OPERATION EK II 03/09 Ope ration Section 3-32 ©2009 Alamo Group Inc. OPERA TION M ow a t th e spee d th a t you can sa f e l y opera t e an d con t ro l th e t rac t or an d mower . Th e correct mowing spee d depends on terrain cond ition and grass type, density , and height of cut.
OPERATION EK II 03/09 Ope ration Section 3-33 ©2009 Alamo G roup Inc. OPERA TION 11 . 3 S hutting Down the Implement T o shut down attached mower head, first bring the tractor to a complete s t op. Decrease engine RPM to idle then disenga ge cu tterhe ad.
OPERATION EK II 03/09 Ope ration Section 3-34 ©2009 Alamo Group Inc. OPERA TION DISCONNECTING THE MO WER FROM THE TRACTOR Lower the Mower to the Ground. Park the T ractor wi th the transmission in the correct gear (Automatic T ransmission --Pa rk; St andard Transmission--Neut ral).
OPERATION EK II 03/09 Ope ration Section 3-35 ©2009 Alamo G roup Inc. OPERA TION Before tran sporting the tractor on a public roadway or boarding a trailer for tr ansport, the tractor brak e pedals should be lo cked together .
OPERATION EK II 03/09 Ope ration Section 3-36 ©2009 Alamo Group Inc. OPERA TION Make cert ain that the “Slow Moving V ehicle” (SMV) sign is inst alled in such a wa y as to be clearly vis ible and leg ible. When transport ing the Equipment use the T ractor flashing warn ing lights and fo llow all local traf fic regulations.
OPERATION EK II 03/09 Ope ration Section 3-37 ©2009 Alamo G roup Inc. OPERA TION Make cert ain that the “Slow Moving V ehicle” (SMV) sign is inst alled in such a wa y as to be clearly vis ible and leg ible. When transport ing the Equipment use the T ractor flashing warn ing lights and fo llow all local traf fic regulations.
OPERATION EK II 03/09 Ope ration Section 3-38 ©2009 Alamo Group Inc. OPERA TION Use adequately sized and rated traile rs and equipment to transport the tractor and imp lement. Consult an author ized dealer to determine the prop er equipment required.
OPERATION EK II 03/09 Ope ration Section 3-39 ©2009 Alamo G roup Inc. OPERA TION 13.TROUBLESHOOTING GUIDE Problem Possible Cause Remedy Excessive Vibration Check for loose nut s on T ighten if loose. blade holder and bla des Check to see if blades are Free blades so they swing free swinging.
OPERATION EK II 03/09 Operation Section 3-40 ©2009 Alamo Group Inc. OPERA TION S treaking Conditions Conditions too wet for Allow grass to dry cutting.before cutting. Slow ground speed of tractor but keep engine running at full PTO rpm. Cutting lower may help.
Maintenanc e Sec tio n 4- 1 ©2009 Alamo Group Inc. MAINTENANCE SECTION.
MAINTENANCE EK II 03/09 Maintenance Section 4-2 ©2009 Alamo Group Inc. MAINTENANCE GENERAL Before operat ing your DB150 , make sure it is pr o perly lubricated and thoro ughly inspected. Only a minimum of time and ef fort is required to re gularly lubr icated and maintain this ma chine to provide long life and trouble free operation .
MAINTENANCE EK II 03/09 Maintenance Section 4-3 ©2009 Alamo Group Inc. MAINTENANCE HYDRAULIC OIL, FIL TERS, AND COMPONENTS Filters and Oil - Change the return filte r tank and su ction filters afte r the first 100 hours of operation. Change the filters again at 500 hours or every 12 mont hs.
MAINTENANCE EK II 03/09 Maintenance Section 4-4 ©2009 Alamo Group Inc. MAINTENANCE BLADE SER VICING Inspect blades befo re each use to dete rmine that they are properly inst alled and in good condition. Replace any blade that is bent, e xcessively nicked, worn, or has any other damage.
MAINTENANCE EK II 03/09 Maintenance Section 4-5 ©2009 Alamo Group Inc. MAINTENANCE BLADE REMOV AL T o remove blades for sharpening or rep lacement, remove the cover p late on deck of mower near Hyd Motor . Remove lock nut from blade b olt. NOTE: Inspect lock nut af ter removal a nd replace if threads are damaged.
MAINTENANCE EK II 03/09 Maintenance Section 4-6 ©2009 Alamo Group Inc. MAINTENANCE STORAGE Y our mo wer repres ents an investment from which you should get the greatest po ssible b enefit.
MAINTENANCE EK II 03/09 Maintenance Section 4-7 ©2009 Alamo Group Inc. MAINTENANCE Cylinder Rod Maintenance It is important to visually inspect the hydrau lic cylind e r rods dail y before use.
ALAMO-INDUSTRIAL LIMITED W ARRANTY 1. LIMITED W ARRANTIES 1.01. Alamo Industrial warrants for one year from the purchase dat e to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser 1.
T o keep your implement running efficiently an d safely , read your manual thoroug hly and follow these directions and the Safety Messages in this Ma nual. The T able of Cont ents clearly identifies each section where you ca n easily find the information you need.
EK II - SOM 03/09 Printed in USA P/N 029691 1 1C.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Alamo Exten-A-Kut II è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Alamo Exten-A-Kut II - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Alamo Exten-A-Kut II imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Alamo Exten-A-Kut II ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Alamo Exten-A-Kut II, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Alamo Exten-A-Kut II.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Alamo Exten-A-Kut II. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Alamo Exten-A-Kut II insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
