Manuale d’uso / di manutenzione del prodotto L465 del fabbricante Eizo
Vai alla pagina of 44
User’ s Manual Color LCD Monitor.
English 2 SAFETY SYMBOLS This manual uses the safety symbols below . They denote critical information. Please read them carefully . W ARNING Failure to abide by the information in a W ARNING may result in serious injury and can be life threatening.
English T ABLE OF CONTENTS 3 T ABLE OF CONTENTS PRECA UTIONS ................................................................................... 4 1. INTRODUCTION ..................................................................................... 9 1-1.
English 4 PRECA UTIONS PRECA UTIONS IMPOR T ANT! • This product has been adjusted specifically f or use in the region to which it was originally shipped. If operated outside the region to which it was originally shipped, the product ma y not perform as stated in the specifications.
English PRECA UTIONS 5 W ARNING Keep small objects or liquids a way fr om the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage.
English 6 PRECA UTIONS W ARNING The equipment must be connected to a gr ounded main outlet. Not doing so may cause in fire or electric shock. Use the correct v oltage . * Do not overload your power circuit, as this may result in fire or electric shock.
English PRECA UTIONS 7 CA UTION Handle with care when carrying the unit. Disconnect the power cord and cables when moving the unit. Moving the unit with the cord attached is dangerous.
English 8 PRECA UTIONS LCD P anel The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to the characteristics of the panel itself, and not the product. The backlight of the LCD panel has a fixed life span.
English 1. INTRODUCTION 9 1. INTR ODUCTION Thank you very much for choosing an EIZO Color Monitor . 1-1. Features • Dual inputs compliant • DVI (p.34) Digital input (TMDS (p.35)) compliant. • Horizontal scanning frequency: 24.8 - 80 kHz (Digital input: 31.
English 10 1. INTRODUCTION 1-3. Controls & Connector s Fr ont S I G . S I G . AUTO AUTO ENT. ENT. (4) (5) (6) (7) (8) (9) (3) (1) (2) SIG. AUT O ENT .
English 1. INTRODUCTION 11 Rear D-SUB D-SUB DVI DVI POWER INPUT POWER INPUT (11) (10) (12) (13) (14) (15) (16) (10) P ower Connector (11) Exter nal line in (stereo mini-jack) (12) D VI-D Input Connect.
English 12 2. CABLE CONNECTION 2. CABLE CONNECTION 2-1. Before connecting Before connecting your monitor to the PC, change the display screen settings (resolution (p.
English 2. CABLE CONNECTION 13 2-2. Connecting the signal cable NO TE • Be sure that the power s witches of both the PC and the monitor are OFF . 1. Plug the signal cable into the connector at the rear of the monitor and the other end of the cable into the video connector on the PC.
English 14 2. CABLE CONNECTION 2. Plug the power cord into the power connector on the rear of the monitor . Then, plug the other end of the cord into a power outlet. W ARNING Use the enclosed po wer cord and connect to the standar d power outlet of y our country .
English 2. CABLE CONNECTION 15 2-3. Sound Connections NO TE • Alwa ys switch the monitor and audio de vice s or computers off whene ver connecting or disconnecting any audio de vices (computer or CD player) to the monitor . • Use the enclosed stereo mini-jack cab le f o r connecting audio devices or computers to the monitor .
English 16 3. ScreenManager 3. ScreenMana g er 3-1. How to use the ScreenManager S I G . S I G . AUTO AUTO ENT. ENT. SIG. AUTO ENT. 1. Entering the ScreenManager Push the Enter button once to display the main menu of the ScreenManager . [Main Menu ] 2.
English 3. ScreenManager 17 NO TE • Double clic king the Enter button at any time also e xits the ScreenManager menu. 3-2. Adjustments and Settings The following table shows all the Screen Manager’ s adjustment and setting menus. “*” indicates adjustments of analog input only and “**” indicates digital input only .
English 18 3. ScreenManager 3-3. Useful Functions Adjustment Loc k Use the “Adjustment Lock” function to prevent any accidental changes. Lock ed function • A uto adjustment button adjustments and settings in the ScreenManager . Unlock ed function • Adjustment of contrast and brightness by the control buttons .
English 3. ScreenManager 19 EIZO Logo disappearing function When switching on the power button on the front panel, the EIZO logo is displyed for a while.
English 20 4. ADJUSTMENT 4. ADJUSTMENT The monitor displays the digital input ima ge corr ectly based on its pre-setting data. Adjust the contrast and brightness (p.23). 4-1. Screen Adjustment Screen adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position.
English 4. ADJUSTMENT 21 3. Adjust by using <Screen> menu in the ScreenManager . (1) V ertical bars appear on the screen → Use the <Clock> (p.34) adjustment. Select the <Clock> and eliminate the vertical bars by using the right and left of the control buttons.
English 22 4. ADJUSTMENT 4. T o adjust the output signal range (Dynamic Range) of the signal. → Use the <Range Adjustment> (p.35)of <ColorManagerment> menu. This controls the level of output signal range to display the whole color gradation (256 colors).
English 4. ADJUSTMENT 23 6. T o set the Contrast of the screen. → Use the <Contrast> adjustment. This controls the brightness for the each color (red, b lue and green) at the same time. Select <Contrast/Brightness> and adjust by using the right and left buttons .
English 24 4. ADJUSTMENT 4-2. Color Adjustment The <ColorManagement> menu in the ScreenManager enables to change the color of the screen. By using the <Color Mode>, th e adjustment mode can be selected from <Custom mode> (to adjust the color settings according to your preference) and <sRGB> mode.
English 4. ADJUSTMENT 25 NO TE • The “Hue” adjustment may cause undispla yable color tone . T o change each color (red, green and blue). → Use the <Gain> (p.34)adjustment. By adjusting the red, green and blue colo r tones for each mode, custom colors can be defined.
English 26 4. ADJUSTMENT Digital input This monitor complies with the DVI DMPM (p.34). [Procedure] (1) Set the PC’ s power saving settings. (2) Select “DVI DMPM” from the “PowerManager” menu.
English 5. A TT A CHING AN ARM ST AND 27 5. A TT A CHING AN ARM ST AND The LCD monitor can be used with an ar m stand by removing the tilt stand and attaching the arm stand to the LCD monitor . NO TE • Use an arm stand that satisfies the followings .
English 28 6. TROUBLESHOO TING 6. TR OUBLESHOO TING If a problem persists even after applying the suggested remedies, contact an EIZO dealer . • No picture problems : See No.1 ~ No.2 • Imaging problems : See No.3 ~ No.11 • Other problems : See No.
English 6. TROUBLESHOO TING 29 Prob lems P oints to chec k with possible solutions 3. Display position is incorrect. ! Adjust the image position using the <Position> (p.21) ! The two display modes, VGA 720 x 400 (70 Hz) and 320 x 200 (70 Hz), have the same signal timings.
English 30 6. TROUBLESHOO TING Prob lems P oints to chec k with possible solutions 10. Fingerprints remain on the screen. ! Leaving the screen white may solve the problem. 11. The <Smoothing> cannot be selected. ! <Smoothing> is disabled when the screen is displayed in the 1280 x 1024.
English 7. CLEANING 31 7. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NO TE • Ne ver use thinner , benzene , alcohol (et hanol, methanol, or isopropyl alcohol), abrasiv e cleaners, or other strong solv ents, as these ma y cause damage to the cabinet or LCD panel.
English 32 8. SPECIFICA TIONS 8. SPECIFICA TIONS LCD P anel 41 cm (16.0 inch), TFT color LCD panel with Anti-Glare Hard Coating Vie wing Angle: H: 160 ° , V: 130 ° (at contrast ratio 1:5) Dot Pitch 0.248 mm Horizontal Scan F requency 24.8 kHz - 80 kH z (A utomatic) (Digital): 31.
English 8. SPECIFICA TIONS 33 Default settings Analog input Digital input Contrast 100% Brightness 100% Smoothing On Color Management Custom mode / O ff (Nor mal white) P owerManager VESA DPMS D VI DMPM Input Signal A uto Off Tim er Disable Language English Dimensions Unit mm (inches) 65(2.
English 34 9. GLOSSAR Y 9. GLOSSAR Y Afterimage The Afterimage is particular to LCD monitors when the monitor screen is left on for a long period without use.
English 9. GLOSSAR Y 35 Phase The phase adjustment decides the sampling timing point for converting the analog input signal to a digital signal. Adjusting the phase after the clock adjustment will produce a clear screen. Range Adjustment The Range Adjustment controls the level of output signal range to display the whole color gradation.
English 36 MEMO MEMO.
APPENDIX/ANHANG/ANNEXE i APPENDIX/ANHANG/ANNEXE Preset Timing Char t for Analog input Timing-Über sichten für Analog Eingang Synchr onisation des Signaux pour A nalog numerique Based on the signal diagram shown below 20 fact ory presets have been registered in the monitor's microprocessor .
ii APPENDIX/ANHANG/ANNEXE Sync P olarity Frequencies A: Front P orch B: Sync P eriod Mode Dot Clock MHz H V H kHz V Hz H µs/Dot V ms/Line H µs/ Dot V ms/ Line VGA 640 × 480 25.2 Nega. Nega. 31.47 59.94 0.636/ 16 0.318/ 10 3.813/ 96 0.054/ 2 VGA 720 × 400 28.
APPENDIX/ANHANG/ANNEXE iii C: Back P orch D: Blanking P e riod E: Displa y Period F: T otal Cycle H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line H µs/ Dot V ms/ Line 1.907/ 48 1.049/ 33 6.356/ 160 1.430/ 45 25.442/ 640 15.253/ 480 31.
iv MEMO MEMO.
[Applicable to gray (standard color version only).] Congratulations! Y ou have just purchased a TCO’99 approved and labelled product! Y our choice has provided you with a product developed for professional use.
Environmental Requirements Flame retardants Flame retardants are present in printed circui t boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retard ant substances.
For U.S.A, Canada, etc. (rated 100-120 V ac) Only FCC Declaration of Conformity W e, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 W arland Drive, Cypress, CA 90630 Phone: (562) 431-5011 declare that the product T rade name: EIZO Model: FlexScan L465 is in conformity with Part 15 of the FCC Rules.
Hinweis zur Ergonomie : Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB 2000 mit dem V ideosignal, 1280 Punkte × 1024 Zeilen, RGB an alog, 0,7 Vp-p und mindestens 75,0 Hz Bildwiederholfrequenz, non interlaced.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Eizo L465 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Eizo L465 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Eizo L465 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Eizo L465 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Eizo L465, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Eizo L465.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Eizo L465. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Eizo L465 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
