Manuale d’uso / di manutenzione del prodotto SHC-265 del fabbricante Echo
Vai alla pagina of 32
S h a f t h e d g e C l i p p e r 1 O p e r a t O r ' S M a n u a l W ARNING Read rules for safe operation and instructions carefully . ECHO provides an Opera- tor's Manual and a Safety Manual. Both must be read and understood for proper and safe operation.
2 Copyright© 2010 By Echo, Incorporated All Rights Reserved. I n t r o d u c t I o n W elcome to the ECHO family . This ECHO product was designed and manufactured to provide long life and on-the-job dependability . Read and understand this manual and the SAFETY MANUAL you found in the same package.
S h a f t h e d g e C l i p p e r 3 O p e r a t O r ' S M a n u a l I n t e r n a t I o n a l s y m b o l s SYMBOL DESCRIPTION/APPLICA TION SYMBOL FORM/ SHAPE SYMBOL DESCRIPTION/APPLICA TION SYMB.
4 Physical Condition Y our judgment and physical dexterity may not be good: • if you are tired or sick, • if you are taking medication, • if you have taken alcohol or drugs. Operate unit only if you are physically and mentally well. Eye Protection Eye protection that meets ANSI Z87.
S h a f t h e d g e C l i p p e r 5 O p e r a t O r ' S M a n u a l Repetitive Stress Injuries It is believed that overusing the muscles and tendons of the ngers, hands, arms, and shoulders may cause soreness, swelling, numbness, weakness, and extreme pain in those areas.
6 e q u I p m e n t W ARNING Use only ECHO approved attachments. Serious injury may result from the use of a non-approved attachment combi- nation. ECHO, INC. will not be responsible for the failure of cutting devices, attachments, or accessories which have not been tested and approved by ECHO.
S h a f t h e d g e C l i p p e r 7 O p e r a t O r ' S M a n u a l 1 2 4 5 6 7 8 9 3 d e s c r I p t I o n Locate these safety decals on your unit. Make sure the decals are legible and that you understand and follow the instruc- tions on them. If a decal cannot be read, a new one can be ordered from your ECHO dealer .
8 1. POWER HEAD - Includes the Engine, Clutch, Fuel System, Ignition System and Recoil Starter . 2. THROTTLE HANDLE - FOR RIGHT HAND - Cushioned grip for right hand. 3. THROTTLE TRIGGER LOCKOUT - This lever must be held during starting. Operation of the throttle trigger is prevented unless throttle trigger lockout lever is engaged.
S h a f t h e d g e C l i p p e r 9 O p e r a t O r ' S M a n u a l c o n t e n t s The ECHO product you have purchased has been factory pre-assembled for your convenience. Due to packaging restric- tions, some assembly of the SHC-260 is required.
10 C D F G H E A B B NOTE Gear Housing must be aligned properly with engine. Aligning cen- ter locating hole in driveshaft housing with center drive shaft bolt (A) provides correct alignment. 5. T ighten two (2) drive shaft clamp bolts (B) securely . 6.
S h a f t h e d g e C l i p p e r 11 O p e r a t O r ' S M a n u a l NOTICE: Use of unmixed, improperly mixed, or fuel older than 90 days, (stale fuel), may cause hard starting, poor performance, or severe engine damage and void the product warranty .
12 W ARNING Alternative fuels, such as E-15 (15% ethanol), E-85 (85% ethanol) or any fuels not meeting ECHO requirements are NOT approved for use in ECHO 2-stroke gasoline engines.
S h a f t h e d g e C l i p p e r 13 O p e r a t O r ' S M a n u a l Mixing Instructions 1. Fill an approved fuel container with half of the required amount of gasoline. 2. Add the proper amount of 2-stroke oil to gasoline. 3. Close container and shake to mix oil with gasoline.
14 s t a r t I n g c o l d e n g I n e W ARNING Hedge Clipper blades are very sharp. T ouching them may lead to severe personal injury . A void touching blades whenever possible, and always wear gloves to protect hands. NOTE The blade cover is used for transportation and storage.
S h a f t h e d g e C l i p p e r 15 O p e r a t O r ' S M a n u a l s t a r t I n g w a r m e n g I n e The starting procedure is the same as Cold Start except DO NOT close the choke, and do not depress throttle trigger to wide open position. W ARNING The blades must not move at idle, otherwise serious personal injury may result.
16 h e d g e t r I m m I n g W ARNING Engine exhaust IS HOT , and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause unconsciousness, serious in- jury , or death. Exhaust can cause serious burns. AL W A YS position unit so that exhaust is directed away from your face and body .
S h a f t h e d g e C l i p p e r 17 O p e r a t O r ' S M a n u a l m a I n t e n a n c e I n t e r v a l s s k I l l l e v e l s Level 1 = Easy to do. Common tools may be required. Level 2 = Moderate difculty . Some specialized tools may be required.
18 a I r f I l t e r Level 1. T ools r equir ed: 25 - 50 mm (1 - 2 in.) Cleaning Brush Parts r equired: REPOWER TM AIR & FUEL FIL TER KIT . 1. Close choke (Cold Start Position [ ]). This prevents dirt from entering the carburetor throat when the air lter is removed.
S h a f t h e d g e C l i p p e r 19 O p e r a t O r ' S M a n u a l s p a r k p l u g Level 2. T ools Requir ed: T -Wrench, feeler gauge, soft metal brush Parts Requir ed: REPOWER TM T une-Up Kit IMPOR T ANT Use only NGK BPM-8Y spark plug (BPMR-8Y in Canada) other - wise severe engine damage may occur .
20 IMPOR T ANT DO NOT use a metal scraper to remove dirt from the cylinder ns. 5. Use brush to remove dirt from the cylinder ns. 6. Remove grass and leaves from the grid between the recoil starter and fuel tank. 7. Assemble components in reverse order .
S h a f t h e d g e C l i p p e r 21 O p e r a t O r ' S M a n u a l Exhaust Port Cleaning Level 2. T ools r equir ed: 4 mm Hex W rench, W ood or plastic scraper Parts Requir ed: As needed: Heat Shield 1. Remove spark plug lead from spark plug, and remove mufer - cover .
22 c a r b u r e t o r a d j u s t m e n t Engine Break-In New engines must be operated a minimum duration of two tanks of fuel break-in before carburetor adjustments can be made. During the break- in period your engine performance will increase and exhaust emissions will stabilize.
S h a f t h e d g e C l i p p e r 23 O p e r a t O r ' S M a n u a l A l u b r I c a t I o n Blades Level 1 T ools Requir ed: Clean rag, brush , oil can. Parts Requir ed: 20W Engine Oil (lubrication), 50-50 mixture of kerosene and 20W oil (cleaning).
24 Drive Shaft Assembly Level 1. NOTE Hedge Clipper drive shaft should be greased every 25 hours of operation. T ools r equir ed: 4 mm hex wrench, clean rag, small brush. Parts r equired: POWER BLENDX TM 14 oz. cartridge P/N 91015 or Lithium Based Grease.
S h a f t h e d g e C l i p p e r 25 O p e r a t O r ' S M a n u a l s h a r p e n I n g b l a d e s Level 3. T ools r equir ed: Flat le, screwdriver . Parts r equired: None. W ARNING Hedge Clipper blades are very sharp. T ouching them may lead to severe personal injury .
26 t r o u b l e s h o o t I n g T R A H C G N I T O O H S E L B U O R T M E L B O R P E N I G N E m e l b o r P k c e h C s u t a t S e s u a C y d e m e R e n i g n E - s k n a r c / d r a h s t r a.
S h a f t h e d g e C l i p p e r 27 O p e r a t O r ' S M a n u a l s t o r a g e W ARNING During operation the mufer or catalytic mufer and surrounding cover become hot. Always keep exhaust area clear of ammable debris during transportation or when storing, otherwise serious personal injury may result.
28 MODEL ---------------------------------------------------- SHC-265 Length ------------------------------------------------------- 2170 mm (85.4 in.) W idth -------------------------------------------------------- 248 mm (9.76 in.) Height ------------------------------------------------------- 254 mm (10.
S h a f t h e d g e C l i p p e r 29 O p e r a t O r ' S M a n u a l ECHO LIMITED W ARRANTY ST A TEMENT FOR PRODUCT SOLD IN USA AND CANADA BEGINNING 01/01/2010 ECHO'S RESPONSIBILITY ECHO Incorporated’s Limited Warranty , provides to the original purchaser that this ECHO product is free from defects in mate rial and workmanshi p .
30 PURCHASED REP AIR P ARTS, SHORT BLOCKS AND ACCESSORIES .
S h a f t h e d g e C l i p p e r 31 O p e r a t O r ' S M a n u a l ECHO INCORPORA TED EMISSION CONTROL W ARRANTY ST A TEMENT FOR ECHO AND SHINDAIW A BRANDS The Environmental Protection Agency (EP A) and the California Air Resources Board (C.A.R.
DEALER? Call 1-800-432-ECHO 1-800-432-3246 or www .echo-usa.com CONSUMER PRODUCT SUPPORT 1-800-673-1558 8:30 - 4:30 Mon - Fri C.S.T . ECHO, INCORPORA TED 400 OAKWOOD ROAD L a k e Z u r i c h , iL 60047 www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Echo SHC-265 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Echo SHC-265 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Echo SHC-265 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Echo SHC-265 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Echo SHC-265, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Echo SHC-265.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Echo SHC-265. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Echo SHC-265 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
