Manuale d’uso / di manutenzione del prodotto AD70H del fabbricante AKAI
Vai alla pagina of 42
MANUAL DE INSTRUCTIUNI AD 70H CARACTERISTICI Va multumim pentru achiziti onarea produsului nostru. Va rugam sa cititi acest m anual inainte de a face conexiunile si d e a folosi acest produs.
Instalati aparatul pe o suprafata orizontala, p lata si solida si cu o ventilatie buna. Nu bl ocati gurile de aerisire, sau va cauza defecte rezultate de supraincalzire. Folositi o panza moale si curata pentru a sterge carcasa. Niciodata nu curatati cu chimicale s au detergent.
PANOU: PANOU FRONTAL: 1 Disc tray door 6 Bu ton deschidere/inchidere 2 Afisaj 7 Buton redare/pauza 3 Slot USB 8 Buton stop 4 Buton stand by PANOU POSTERIOR: 1 Iesire HDMI 5 Iesire audio 5.
Note: Din iesirile video de mai sus, HDMI este cea mai buna, componenta video a doua, SCART este mai buna, S-VIDEO este buna si vide o compus este standard. Folositi cea mai buna conexiune video disponibi la. Nu faceti toate conexiunile de mai sus in ace lasi timp, altfel imaginile produse vor fi afectate.
INTRARE AUDIO TV/MONITOR/AMPLIFICATOR IESIRE AUDIO DVD OPERATII MENIU 1. Apasati SETUP din telecomanda pentru a va afisa m eniul de configurare 2. Apasati ← / → pentru a alege o optiune. Submeniul optiunii selectate va fi afisat instantaneu. 3. Apasati ↑ / ↓ pentru a selecta op tiunea care doriti sa o modificati, apoi apasati ENTER / → .
NOTA: Aceasta functie merge doar pe discurile codate cu closed caption. 1.5 ECONOMIZATOR ECRAN ON: Daca imaginea ramane fara miscare pe ecran, de exemplu cand discul este pus pe pauza,opr it,etc, pentru mai multe minute, un economizator de ecran va ap area.
NOTA: Unele amplificatoare nu suporta modul 96KHz, mod care va afecta iesirea coaxiala. 2.3. CHANNEL DELAY Aceasta functie este folosita pent ru a seta tim pul de intarziere pentru boxele centrale,spate si subwoofer.Intarzierea este pentru a compensa timpul de propagare diferit al boxelor cauzat de distanta dintre boxe si ascultator.
Cand modul panorama este pornit, boxele frontale sunt partial redate in canale surround pent ru un efect de invaluire. 2.5.1.4. DIMENSIUNE Aceasta functie este disponibila num ai cand modul este setat pe MUSIC. Aceasta functie permite ajustarea g radata a campului de sunet fie spre fata, fie spre spate.
transporte pana la 5Gbps (gigabits per second). Este de doua ori mai mult decat o banda care transm ite audio-video m ulti canal. Acestea si multi alti factori, fac din H DMI un sistem mult m ai dorit decat predecesorii, componenta video, S-Video si vid eo compus.
5.5. DEFAULT (IMPLICIT) Restaureaza setarile implicite exceptand setarile controlu lui parental si PAGINA DE CONFIGURARE A PAROLEI. OPERAREA TELECOMENZII Introduceti doua baterii AAA/1,5V in telecomanda. Indreptati telecomanda catre senzorul tel ecomenzii de pe panoul frontal.
1 STANDBY 16 REPEAT 2 TASTE NUMERICE 17 OPEN/CLOSE 3 GO TO 18 OSD 4 PROGRAM 19 DEFAULT 5 PBC 20 V-MODE 6 SETUP 21 ANGLE 7 VOLUM +/- 22 MUTE 8 FAST FORWARD 23 PLAY/PAUSE 9 FAST REWIND 24 NEXT 10 TITLE .
Apasati pentru a porni unitatea. Apasati din nou pentru a intra in modul stand-by. Nota: Fiind in modul standby fo loseste o cantitate minim a de curent, dar asigura ca component ele unitatii sa fi e la eficienta maxima atunci cand po rniti.
Puteti repeta o anumita sectiu ne a unui disc cu acest buton. Apasati acest buton pentru a marca punctul de inceput (A) si apasati din nou pentru a mar ca punctul de sfarsit (B). Apoi, unitatea va reda aceasta sectiune ia r si iar. Apasa ti pentru a treia oara pentru a revoca repetarea A-B si a reveni la redarea normala.
REDAREA DE PE USB Introduceti un stick USB in slot-u l USB, apoi apasati tasta USB pentru a citi USB-ul si pentru a reda fisierele. Apasati USB din nou pentru a reveni la modul DVD. NOTA: In cazul in care player-ul se blocheaza cand introduceti un stick USB, opriti-l, deconecta ti-l din priza si scoateti stick-ul USB.
REZOLVAREA PROBLEMELOR Inainte de a recurge la servic e, va rugam sa verificati urmatorul tabel: PROBLEME CAUZE REMEDIERE Fara curent Cablul AC n u este conectat la priza sau nu este conectat bine Ver.
SPECIFICATII SURSA DE PUTERE AC~100-240V/50-60Hz CONSUM 20W SISTEM TV PAL/NTSC LUNGIMEA UNDEI LASER 650nm, 780nm FRECVENTA AUDIO DVD: 4Hz~22kHz(48kHz PCM) 4Hz~44kHz(96kHz PCM) CD: 4Hz~20kHz S/N RATIO ≥ 80dB INTERVAL AUDIO DINAMIC ≥ 90dB CONDITII DE OPERARE TEMP:0~40°C, orizontal IESIRE VIDEO 1.
D VD Play er D VD Play er D VD Play er D VD Play er D VD Play er D VD Play er D VD Play er D VD Play er D VD Play er D VD Play er D VD Play er D VD Play er D VD Play er D VD Play er D VD Play er D VD .
Contents Features....................................................................................................................2 For your Attention..................................................................................................
Features Thanks for your purchase of our product. Please read through this manual before making connections and operating this product. Retain this manual for future reference. DVD player is a domestic video player of new generation which produces high quality pictures and Hi-Fi audio effect.
For Y our Attention -3- To reduce the risk of electric shock or fire, do not open the cover. Refer servicing to qualified service personnel. IMPORTANT NOTES The lightning flash is intended to alert th.
Accessories Accessories A/V cable Remote control User manual Us er m a n u a l Symbol Contents A udio + Video DVD Disc types A udio + Video Audio A udio MP3 Video-CD VCD CD-DA JPEG Photo CD Picture CD.
Panel -5- Front Panel Rear Panel 1 DISC TRA Y 2 DISPLAY SCREEN 3 USB SLOT 4 STANDBY BUTTON 5 OPEN/CLOSE BUTTON 6 PLAY/P AUSE BUTTON 7 STOP BUTT ON 1 HDMI OUTPUT 2 MIXED L/R AUDIO OUTPUT 3 COAXIAL DIGIT AL AUDIO OUTPUT 4 S-VIDEO OUTPUT 5 5.
Connections DVD Player Video Output TV/Monitor Video Input VIDEO SYSTEM CONNECTION Notes: The following video outputs are available for this unit. S-Video Use an S-V ideo cable to connect the S-V ideo output of this unit to the S-Video input of a TV/monitor.
-7- R L -7- R L -7- R L MIX L MIX R -7- R L MIX L MIX R COAXIAL COAXIAL Stereo Audio 5.1 CH Audio Use 3 pairs of audio cables to connect the 5.1 CH audio outputs of this unit to the 5.
1. Press [SETUP] on the remote control to show the setup menu. 2. Press [ ]/[ ] to select an item. The submenu of the selected item will be displayed below instantly . 3. Press [ ]/[ ] to select an item you desire to set in the submenu, then press [ENTER] /[ ]to enter.
System Setup 1.3 OSD LANGUAGE ( On-Screen Display Language) Set the on-screen display language in this item. 1.4 CLOSED CAPTIONS 1.5 SCREEN SAVER ON: utton except [ST ANDBY] to OFF: Disable the screen saver function.
System Setup 2 AUDIO SETUP PAGE 2.1 2.1.1 DOWNMIX LT/RT : The 5.1-channel audio is mixed into left channel and right channel and is output via the FL and FR speaker respectively. STEREO: The 5.1-channel audio is mixed into stereo signal and is output via the FL and FR speaker .
System Setup 2.2.2 LPCM OUTPUT When DIGITAL OUTPUT is set to SPDIF/PCM , this item is available. Select a sample rating for the digital audio output. There are two options, 48KHz and 96KHz. NOTE: Some amplifiers don't support 96KHz sampling which will af fect the coaxial output.
System Setup -12- 2.4 EQUALIZER 2.4.1 SOUND MODE Select a sound mode, ROCK , POP , LIVE , DANCE , TECHNO , CLASSIC or SOFT , or select OFF to for no sound effect. 2.4.2 BASS BOOST Set it to ON to boost the bass sound. 2.4.3 SUPER BASS Set it to ON to get the super bass sound effect.
2.5.1.3 P ANORAMA This item is used to turn on/off panorama mode and is available only when MODE is set to MUSIC. When panorama mode is turned on, the front stereo audio is partially fed into the surround channels for an enveloping effect. 2.5.1.4 DIMENSION This item is available only when MODE is set to MUSIC .
4 VIDEO SETUP P AGE 4.1 VIDEO OUTPUT OFF : Set video output to S-V ideo if the S-Video connection is made. YUV : Set video output in analog component video format if the component video outputs are used. RGB : Set video output in Red/Green/Blue format if the SCART output is used.
-15- System Setup HDMI is an uncompressed, all-digital signal, while the aforementioned interfaces are all analog. With an analog interface, a clean digital source is translated into less precise analog, sent to the television, then converted back to a digital signal to display on screen.
-16- System Setup 5.2 AUDIO, SUBTITLE and DISC MENU Select a preferred audio language, subtitle language and disc menu language in these items. You can also make selection of the audio language by using the [AUDIO] and the subtitle language by the [SUBTITLE] on the remote control.
Remote control -17- Insert two AAA/1.5V batt eries into the remote control. Point the remote control at the remote sensor on the front panel. The remote control works within a distance of about 8 metres from the sensor and within an angle of about 30 degrees from the left and right side.
Remote control -18- 21 22 24 25 33 32 31 26 28 29 18 19 20 27 30 17 16 23 2 10 7 6 12 1 3 4 5 8 9 15 14 13 11 1 ST ANDBY 2 DIGIT KEYS 3 GOTO 4 PROGRAM 5 PBC 6 SETUP 7 VOLUME+/- 8 FAST FORWARD 9 FAST R.
-19- GOTO Press to enter the selected item in the menu or to confirm and execute a selection. The direction keys can be used to move the highlight in the menu. Press to open /close the disc tray. OPEN/CLOSE STANDBY DEFAULT SETUP Press to switch on the unit.
Press it once to pre-stop a playback. Press [ ] to resume the playback from the pre-stopped status. Press it twice to stop a playback and the disc will be reset to the starting point. -20- Press for fast forward playback. The available speeds are 2X, 4X, 8X, 16X and 32X.
-21- Press to return to the upper disc menu. Press to activate/ disable the PBC function. When playing disc encoded with PBC function, press to display the PBC menu. Press it again to disable the PBC function. (Note: This function only works with those discs encoded with PBC function such as VCD 2.
Insert an MP3/MPEG4 disc into the player; a content menu will display on the screen. MENU OPERA TION : Use the direction key [ ]/[ ] to select a folder or a file, then press [ENTER] to enter the selected folder or play the selected file. You can also use the digit keys to make selection of a folder to enter or a file to play.
-23- Basic Playback KODAK PICTURE CD PLA YBACK Place a kodak picture CD in the disc tray; the unit will load the disc automatically. Press [ ] to enter the thumbnail mode to preview the pictures. In the thumbnail mode, use the direction keys to select a picture, then press [ENTER] to start the playback from the selected picture.
Troubleshooting -24- Before resorting to maintenance service, please kindly check by yourself with the following chart. The player breaks down when a USB drive is inserted into the player . Sound There is no sound or the sound is distorted. The audio cables aren't connected securely .
Specifications Power supply Power consumption TV system Audio f requency range S/N ratio Laser wave length Audio dynamic range 20W PAL /NTSC 650nm, 780nm DVD: 4Hz~22kHz 48kHz PCM 4Hz~ 44kHz 9 6kHz PCM CD: 80dB 90dB Operating conditions Video output S-video output Audio output (analog audio) 1.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il AKAI AD70H è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del AKAI AD70H - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso AKAI AD70H imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul AKAI AD70H ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il AKAI AD70H, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del AKAI AD70H.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il AKAI AD70H. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo AKAI AD70H insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
