Manuale d’uso / di manutenzione del prodotto DVD Micro Theater System del fabbricante Dolby Laboratories
Vai alla pagina of 40
1 O WNER'S MANU AL D VD HOME THEA TER SYSTEM CD -R CD -R W VCR A V INPUT CD PLAYBACK R SIZE : 148 X 210mm.
E - 1 IMPOR T ANT SAFETY INSTR UCTIONS W ARNI NG The lightning flash with an arrowhead symbol, within the equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to cause an electric shock.
E - 2 Important Safety Instructions 1 . Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2 . Retain Instructions - The safety and operating instructions should be retained for future reference.
E - 3 TABLE OF CONTENTS Important Safety Instruction ......................1-2 Disc Formats ................................................ 4 Before You Start ........................................... 5 Using the remote control ....................
E - 4 The Unit can playback discs bearing any of the following marks: Region Management Information Region Management Information: This Unit is designed and manufactured to respond to the Region Management Information that is encoded on DVD discs.
E - 5 BEFORE YOU ST AR T To install Batteries 1. Open the battery door. Battery Replacement When batteries become weak, the operating distance of the Remote Control is greatly reduced and you will need to replace the batteries.
E - 6 PARTS AND FUNCTIONS (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) Remote Control 1) STANDBY / ON button Turns the Unit on and puts it in standby mode. 2) RETURN button Return to the normal operation after using the SETUP menu.
E - 7 PARTS AND FUNCTIONS Remote Control (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) (Continued on next page) 19 ) FUNCTION button Display the FUNCTION screen where you can check or change various setting.
E - 8 Rear Panel PARTS AND FUNCTIONS 12) Power cord 13) VIDEO OUT jack 14) Left/Right AUDIO OUT jacks 15) COMPONENT VIDEO jacks (Y, P B /C B , P R /C R ) 16) VIDEO IN (VCR) jack 17) FM ANTENNA jack 18.
E - 9 DISPLA Y Region (Local) Number Error Indicator If the region (local) number of the disc that you attempt to play differs from the region number of the Unit. "Invalid Region" appears on the TV screen. (The disc cannot be played). If no disc is loaded when the Main Unit is switched on.
E - 10 SETUP (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) FM Connect FM antenna (included) to the FM ANTENNA jacks. AM(MW) Connect the loop antenna (included) to the AM(MW) LOOP ANTENNA terminals.
E - 11 SETUP (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) Analogue connection Using the Audio cable (not supplied), connect the left/right AUDIO OUT jac k on your Unit to the A UDIO IN jac k.
E - 12 SETUP C. Connecting a VCR 1. Using the supplied A udio/Video cable , connect the yellow plug from VIDEO OUT jack on y our Unit to VIDEO IN jac k on your TV , connect the left and right A UDIO OUT jacks on your Unit to A UDIO IN jacks on y our TV .
E - 13 SETUP (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) D. Connecting the speakers & subwoofer The speaker cords have been color-coded to simplify connection.
E - 14 E. Positioning the speakers and subwoofer SETUP CENTER Pla ce on the t op of or be lo w th e TV . REAR SPEAKE R S Place right besi de or slightly behi nd your li ste ni ng pos it ion , and a little high er than y our ears. SUB WOO FER Can be p l aced anywhe r e.
E - 15 SETUP Turning on the Unit and TV 1 )Press the ST ANDBY/ON button to turn the Unit ON, or 2 )Press the ST ANDBY /ON button on the remote control or the FUNCTION b utton or the PLA Y button to turn on the Unit while the Unit is in standby mode. 3 )T ur n on the TV by pressing its P O WER button.
E - 16 ADJUSTING THE SOUND (continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page) To adjust the surround sound balance while Dolby.
E - 17 ADJUSTING THE SOUND To select the listening channel 1. When the disc is stopped, you can press the 5.1/2.1 CH button on the remote control to select different speakers output status shown on below table.
E - 18 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) PLA YING A DISC DV D C D This owner’ s manual explains the basic instructions of this D VD Unit. Some D VD discs are produced in a manner that allo ws specific or limited operation during playbac k.
E - 19 Fast Forward/Fast Reverse 1. Press the TUNING or TUNING button when a disc is pla ying. • The disc begins fast scan at x2 speed. • Four speeds are a v ailable . Each time TUNING or TUNING button is pressed, the speed of fast scan changes in the following sequence: 2.
E - 20 DV D Angle selection Some D VDs contain scenes which ha ve been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles. 1. While you are pla ying a D VD with different angles recorded, press the ANGLE button to view the number of the current angle.
E - 21 SPECIAL FUNCTIONS DV D DISPLA Y function Using DISPLA Y , you can chec k and change the current settings of the following items: ANGLE, A UDIO and SUBTITLE. • While the disc is playing, press the DISPLA Y button to displa y the screen shown belo w .
E - 22 Locating a specific title If a D VD disc contains title numbers, y ou can locate a specific title by directly selecting a title number . 1. In stop mode, press the GOTO button. 2. Press , or button to highlight a specific field and press the corresponding number button(s) for the title you want.
E - 23 DV D C D Locating a specific time Y ou can move to a specific location b y entering its corresponding time (hours, minutes , seconds) 1. Press the GOTO button. 2. Press or button to highlight time. 3. Press the corresponding number buttons for the setting point you want.
E - 24 Programmab le memory The two types of prog rammed playbac k provided b y this Unit are title programmed pla yback and chapter progr ammed pla yback. Title / Chapter programmed pla yback 1. Press the MEMORY b utton while the disc is stopped. 2. Enter the title numbers in - - .
E - 25 Y ou can play a specific title or chapter repeatedly . (Title repeat, chapter repeat, A-B repeat) Repeating a title Y ou can play the same title repeatedly . 1 . While the disc is playing, press the REPEA T DISC button until the “ ” indicator displays on the screen.
E - 26 This Unit will play MP3 and Picture files recorded on CD-R disc . Playing a MP3 file disc 1. Press the OPEN /CLOSE button, the disc tray opens. 2. Insert a MP3 file disc on the disc tray with the label side up. 3. Press the OPEN/CLOSE button, the disc tray closes.
E - 27 PLA YING MP3 AND PICTURE FILE DISC Playing a Picture file disc 1. Press the OPEN/CLOSE button, the disc tray opens. 2. Insert a Picture CD on the disc tray with the label side up. 3. Press the OPEN/CLOSE button, the disc tray closes. 4. The unit will take a short while to load the disc.
E - 28 T uning into a station man ually 1. Press the FUNCTION button until the frequency band appears on the display . 2. Press the BAND button on the remote remote or STOP button on the front panel to select the desired band. 3. Press the TUNING button to tune in the desired station.
E - 29 LANGU A GE setting 1. Press the FUNCTION button until D VD appears on the display . 2. Press the STOP button so that no disc is playing. 3. Press the SETUP button. 4. Use or button to select the Language, then press the ENTER button. 5. Use or button to English, then press the ENTER b utton.
E - 30 4:3 Pan Scan • When wide-screen video material is played, this mode clips the right and left sides of the image so that it can be view ed on a conv entional TV screen. • Some wide-screen D VDs that do not per mit Pan Scan mode pla yback are automatically played in letterbox mode (black bands top and bottom).
E - 31 CUST OMIZING THE FUNCTION SETTINGS Brightness 1. Press the SETUP button. 2. Use or b utton to select Video , then press the ENTER button. 3. Use or button to select Brightness, and then press the ENTER button. 4. Use or button to shift and select the Off/On, then press the ENTER button.
E - 32 A UDIO setting Digital Out 1. Press the SETUP button. 2. Use or button to select Audio, press the ENTER button. 3. Use or button to select Digital Out, and then press the ENTER button repeatedly to select Digital Out type. 4. T o exit the FUNCTION SETUP MENU and return to the nor mal screen, press the RETURN button.
E - 33 (continued on next page) (continued on next page) (continued on next page) (continued on next page) (continued on next page) Subwoofer 1. Press the SETUP button. 2. Use or button to select the Audio, press the ENTER button. 3. Use or button to Subwoof er , and then press the ENTER b utton.
E - 34 Pink noise 1. Press the SETUP button. 2. Use or button to select the Audio, press the ENTER button. 3. Use or button to Pink noise, and then press the ENTER button. 4. Use or button to select the desired setting, and then press the ENTER button.
E - 35 CUST OMIZING THE FUNCTION SETTINGS RA TING setting Password/Parental lock D VD discs equipped with the password function are rated according to their content. The contents allow ed by a parental lock le v el and the wa y a D VD disc can be controlled may v ary from disc to disc.
E - 36 Factory Set If you want to return the initial language setting to the factory default, do the following: 1. Press the SETUP button. 2. Use or button to select the Rating, then press the ENTER button. 3. Use or button to shift and select the F actor y Set, then press the ENTER button.
E - 37 Code AA AB AF AM AR AS AY AZ BA BE BG BH BI BN BO BR CA CO CS CY DA DE DZ EL EN EO ES ET EU FA FI FJ FO FR Code FY GA GB GL GN GU HA HI HR HU HY IA IE IK IN IS IT IW JA JI JW KA KK KL KM KN KO .
E - 38 Cleaning the Unit • Be sure to turn the Unit off and disconnect the AC power cord before maintaining the Unit. • Wipe the Unit with a dry soft cloth. If the surfaces are e xtremely dir ty , wipe clean with a cloth which has been dipped in a weak soap-and-water solution and wrung out thoroughly , then wipe with a dr y cloth.
E - 39 SYMPT OM CA USE (AND REMED Y) • Check that the speak ers and equipment are connected securely . • Make sure that you've selected the corrected equipment on the system. • The system is in pause mode or in Slow-motion Pla y mode . Press the PLA Y b utton to return to normal play mode.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Dolby Laboratories DVD Micro Theater System è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Dolby Laboratories DVD Micro Theater System - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Dolby Laboratories DVD Micro Theater System imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Dolby Laboratories DVD Micro Theater System ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Dolby Laboratories DVD Micro Theater System, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Dolby Laboratories DVD Micro Theater System.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Dolby Laboratories DVD Micro Theater System. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Dolby Laboratories DVD Micro Theater System insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
