Manuale d’uso / di manutenzione del prodotto EBOX-2300SX-LS del fabbricante DMP Electronics
Vai alla pagina of 60
eBox-2300SX-L S User ’s Manual 1 DM&P Gr oup eBox-2300SX-LS User ’ s Manual DMP Electronics Inc..
eBox-2300SX-L S User ’s Manual I C OPYRIGHT The information in this manual is subject to change without notice for continuous improvement in the product.
eBox-2300SX-L S User ’ s Manual II T RADEMARKS A CKNOWLEDGMENT eBox-2300SX-LS is the registered tr ademarks of DMP Electronics Inc. The brand names, product names or trade names appearing in this document are the properties and registered tr ademarks of their respec tive owners.
eBox-2300SX-L S User ’ s Manual III S AFETY I NFORMA TION WARNING Do not expose eBox-2300SX to rain or moisture, in order to prevent shock and fire hazard. Never install eBox-2300SX in wet locations. Do not open the cabinet to avoid elec trical shock.
eBox-2300SX-L S User ’ s Manual IV R EGULA TORY FCC C LASS A N OTE This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Pa rt 15 of the FCC Rules.
eBox-2300SX-L S User ’ s Manual V P URCHASE A GREEM ENT P URPOSE : In accordance to the general commercial conduct of T rust and Fa ir T rade, herewith below is the agreement for the protection fo r both parties, DMP and Users in pursuant of trading.
eBox-2300SX-L S User ’ s Manual VI Ta b l e Chapter 1 Product Package ………………………………………………………… 1 Chapter 2 The Setup Mode Setting ………………………………………………….2 First Section: Booting ………………………………………………………………….
eBox-2300SX-L S User ’s Manual 1 Chapter 1 Product Package 1. eBox-2300SX x 1 。 2. Power-15W-3pin x 1 。 3. Compact Flash Card x 1 。.
eBox-2300SX-LS User ’ s Manual 2 Chapter 2 The Setup Mode Setting First section: Booting 1.1 When you start the system and the scree n will shows as below: （ 1-1 ） 1.2 Input administrator ’s username and password as picture 1-2. The default username is administrator and the defaul t password is 123.
_______________________________ eBox-2300SX-LS User ’ s Manual 3 （ 1-2 ）.
_______________________________ eBox-2300SX-LS User ’ s Manual 4 1.3 When you enter to Setup Mode in the first time as （ 1-3 ） . There are function icons, including “My Computer”, “Change Language”, and “T est S tateless” on the desktop.
_______________________________ eBox-2300SX-LS User ’ s Manual 5 （ 1-4 ）.
_______________________________ eBox-2300SX-LS User ’ s Manual 6 Second section: The Introducti on of Control Panel Setting Under “My Computer”/ “Control Panel”, it includes Networ k, User D.
_______________________________ eBox-2300SX-LS User ’ s Manual 7 2.4 Resource ： Set “Enable” or “ Disable” in eBox Local access Peripheral resource. The Default is “Enable”. The system cooperates with Driver CD and Device Managercan to auto-scratch hardware devices on the resources list and installs the driver .
_______________________________ eBox-2300SX-LS User ’ s Manual 8 2.7 Boot Menu ： Y ou can set “Enable” or “Disable” on eBox graphic or literal boot mode. Suggest user use default of the system and do not change it. 2.8 St ateless ： The implement can make administrator to centralize the setting methods.
_______________________________ eBox-2300SX-LS User ’ s Manual 9 2.10 Adjust Time ： It can set the time and date of the system. 2.1 1 Admin ： It supply administrator to alter system password, and to set “Enable” or “Disable” system setting function inf Control Panel and Samba Server password revise setting tool 2.
_______________________________ eBox-2300SX-LS User ’ s Manual 10 2.13 Connection Manager ： The tool is for integrateing RDP , ICA, XDMCP , VNC connection. User can set related connection setting of RDP , ICA, XDMCP , and VNC by Connection Manager .
_______________________________ eBox-2300SX-LS User ’ s Manual 11 Xhost. These are showed as (3-1). 3.1 Detect ： Net- detect tool. 3.1.1 Ping ： It can input IP Address to test whet her the Internet is normal or not. 3.1.2 T raceroute ： The tool can detect the c ondition of Nets Package T ransmission of IP address.
_______________________________ eBox-2300SX-LS User ’ s Manual 12 3.2.2 T elnet ： The tool is for Remote T erminal Connection. After Connecting to another host, if its IP address ha ve been added in Xhost (see 3.1) ， and input Command order: export DISPLA Y=local IP:0 .
_______________________________ eBox-2300SX-LS User ’ s Manual 13 Forth Section: About It shows related system information in “My Computer”/ “About”, including eBox version, CPU, and RAM as (4-1).
_______________________________ eBox-2300SX-LS User ’ s Manual 14 Fif th Section: Network Setting 1 Click “My Computer”/ “Control Panel”/ “Network” and it will show Network Configuration as （ 5-1 ） . User can press Edit to pr oceed to network setting, and then click Enable DHCP to start DHCP and pre ss OK.
_______________________________ eBox-2300SX-LS User ’ s Manual 15 Sixth Section: Desktop 1. Click “My Computer”/ “Control Panel ”/ “User Desktop”, it will show as （ 6-1 ） , and you can choose which tools can be used for user .
_______________________________ eBox-2300SX-LS User ’ s Manual 16 Seventh Section: Connecting Manager 1. Administrator can enter “My Computer”/ “Control Panel”/ “C onnection Manager” in Setup Mode which showed as （ 7-1 ） . Then press “New” and it will show “New Add”, including ICA 、 RDP 、 XDMCP 、 VNC.
_______________________________ eBox-2300SX-LS User ’ s Manual 17 Edit ： Delet/ Modify Conncetion Delete ： Delete Connection Definition Desktop ： Select ICA and RDP which be set, then press ”Desktop”, and the connection will showed as ICON and be put on desktop in the User Mode.
_______________________________ eBox-2300SX-LS User ’ s Manual 18 （ 7-4 ） Setting Item Illustration T itle Input Connection title Browse Option Network Protocol ： Choose one net work protocol. Server Location ： input IP or DNS of ICA Serv er which you want to connect.
_______________________________ eBox-2300SX-LS User ’ s Manual 19 7.1.2 ICA-Service Setting When you click Sevice in ICA Server Connection list, it will show a picture as （ 7-5 ） .
_______________________________ eBox-2300SX-LS User ’ s Manual 20 Setting Item Illustration Username Input ICA Server user ’s username. Password Input ICA Server user ’s pa ssword. Domain Any information about using Internet can be inputted in the frame.
_______________________________ eBox-2300SX-LS User ’ s Manual 21 Setting Item Illustration Connect via SOCKS Proxy If the firewall is used on ICA Server , you can click the item. Proxy Input IP address and Port numbe r . 7.1.6 ICA–Misc Setting When you click Misc in ICA Server Connection list, it will show a picture as （ 7-9 ） .
_______________________________ eBox-2300SX-LS User ’ s Manual 22 （ 7-10 ） 7.1.7.2 ICA-Settings -Hotkeys Setting Press “Hotkeys” and it will show as （ 7-1 1 ） . Y ou can choose “Hotkeys” when you start ICA Server connection. （ 7-1 1 ） 7.
_______________________________ eBox-2300SX-LS User ’ s Manual 23 （ 7-13 ） 7.1.7.4 ICA-Settings-Drive Mapping Setting After pressing “Setting” in ICA Server Connec tion Setting, Press “Drive Mapping” and it will show as （ 7-14 ） . Y ou can set each storage and “Enable” its Read or W rite.
_______________________________ eBox-2300SX-LS User ’ s Manual 24 （ 7-16 ） 7.1.7.7 ICA-Settings-Printer Setting After pressing “Setting” in ICA Server C onnection Setting, Press “Printer” and it will show as （ 7-17 ） .
_______________________________ eBox-2300SX-LS User ’ s Manual 25 7.2 Set RDP Client Connection: After pressing “New” , click a “New Add” RDP Connection. It shows as (7-18). (7-18) 7.2.1 Set RDP Client Connection ： After clicking a “New Add” RDP Connection, it shows as (7-19), you have to input T itle in the “Name”.
_______________________________ eBox-2300SX-LS User ’ s Manual 26 7.2.2 Set RDP user ’ s Login informati on. It shows as (7-20). (7-20) 7.2.3 This part is set Network Drive, includ ing Disk Redirection, Com Port s and LPT Ports. It shows as below .
_______________________________ eBox-2300SX-LS User ’ s Manual 27 7.2.4 Set Color Pallete and Screen Resolution of Desktop. It shows as (7-22). (7-22) 7.
_______________________________ eBox-2300SX-LS User ’ s Manual 28 7.2.6 The （ 7-24 ） shows that user select a connection s etting, press”Connect”, and it will connect to RDP Server .
_______________________________ eBox-2300SX-LS User ’ s Manual 29 7.3 Set VNC Connection ： Add new VNC Connection and it will shows a VNC viewer as （ 7-25 ） .
_______________________________ eBox-2300SX-LS User ’ s Manual 30 7.4 XDMCP Connection Setting ： Add new XDMCP Connection and it will shows a XDMCP viewer as （ 7-26 ） . Input Connection T itle in “Name”, IP Address in “IP”and press “OK” to comp lete XDMCP Connection Setting.
_______________________________ eBox-2300SX-LS User ’ s Manual 31 Eighth Section: S t ateless 8.1 If administrator has to set more 2300SX-LS in differ ent computer , you can uniform their using function and set differ ent using limit s by S tateless.
_______________________________ eBox-2300SX-LS User ’ s Manual 32 8.2 After executing the step of 8.1 go back to Desktop, press T est S tateless, and it will shows that Check User name, Password, Se rver Address. Then the system will show whether the S tateless Server is in success or not.
_______________________________ eBox-2300SX-LS User ’ s Manual 33 （ 8-3 ） 8.4 （ 8-4 ） is show that S tateless be in “Enab le” and it only reveal S t ateless after rebooting Control Panel.
_______________________________ eBox-2300SX-LS User ’ s Manual 34 8.5 S tart S t atelesss and reboot, the system will request you to input login ID and password in booting process. Administrator can t ake the S tateless Demo ／ williamh.ini be reference in Driver CD.
_______________________________ eBox-2300SX-LS User ’ s Manual 35 CDPLA YER=1 CD Player: 1 means “Enable”, 0 means “Disable” MAIN=1 Control Panel: 1 means “Enable”, 0 means “Disable”.
_______________________________ eBox-2300SX-LS User ’ s Manual 36 8.6 St ateless The illustration of further argument: [extra_app] Put other V olutary- making applie d programs on user ’ s desktop.
_______________________________ eBox-2300SX-LS User ’ s Manual 37 2. Set EXCELArgument [rdp_excel] TYPE="rdp" NAME="test" DEF AUL T_ DOMAIN="tcide" DEF AUL T_ P ASSWORD="tcide" DEF AUL T_ USER="tcide" APPLICA TIO N="c:progra~1/micros~2/of fice/excel.
_______________________________ eBox-2300SX-LS User ’ s Manual 38 8.6 Set eBox-2300SX-LS argument in St ateless: Global.ini [lang] my_lang=en [icaserver] ip=21 1.
_______________________________ eBox-2300SX-LS User ’ s Manual 39 Ninth Section: Alter Sy stem Password 9.1 User can alter system password in Admin. Administrator enters Control Panel/ Admin, and it will show a login screen. The default password is “123”, and press”login”.
_______________________________ eBox-2300SX-LS User ’ s Manual 40 9.2 After login, the screen will show three icons as （ 9-2 ） , including Password, Authentication, and SAMBA.
_______________________________ eBox-2300SX-LS User ’ s Manual 41 Chapter 3 The User Mode 1 . The User can “Double Click “thses icons on the Desktop, or press “S tart” to click the applied program which you want to use.
_______________________________ eBox-2300SX-LS User ’ s Manual 42 （ 3-2 ）.
_______________________________ eBox-2300SX-LS User ’ s Manual 43 Chapter 4 Q&A First Section about Win2000 Server Q ： I can not input login information when I login Windows 2000 T erminal Server , why? A ： Make sure if the item of user offer has been selected in login information of RDP-T cp Connection Setting.
_______________________________ eBox-2300SX-LS User ’ s Manual 44 click “Next”. After pressing “Finish”, you will get a mail of PIN. (Personal ID Number). Then, go back to “T erminal Service License”, click right mouse key on Computer Name, and select “S tart Server .
_______________________________ eBox-2300SX-LS User ’ s Manual 45 starting “T erminal Service”, you need use “A dd/ Remove” to re-install program.
_______________________________ eBox-2300SX-LS User ’ s Manual 46 http://support.microsoft.com/suppor t/kb/articles/Q248/4/30.ASP Q ： How to set the Proxy in order to make the “T erminal Service” go through the Firewall? A ： T erminal Server client use the TC P 3389.
_______________________________ eBox-2300SX-LS User ’ s Manual 47 Duplicate Drmapclt.dll File to WinntSystem32 Folder Press “S tart”/ “Execute” and input Reged t32 Input Drmapclt : HKEY_CURR.
_______________________________ eBox-2300SX-LS User ’ s Manual 48 Duplicate the 32-bit Fxfr .d ll to "Program FilesT ermi nal Services Client" Change the name of Rdpdr .dll which in the "Program FilesT erminal Services Client" to Rdpdr .
_______________________________ eBox-2300SX-LS User ’ s Manual 49 <Notice>Client computer can not remote contr ol System Controller and Sy stem Controller can not control Client computer . The Resolution of your computer and Client computer should be in consistency .
_______________________________ eBox-2300SX-LS User ’ s Manual 50 reset session: reset default. shadow: monitor other user ’s computer . tscon: Connet to other existing “T erminal” Server . tsdiscon: T erminate the connection of “T ermianl” Ser ver and Client.
_______________________________ eBox-2300SX-LS User ’ s Manual 51 Select an item from “Name” and press “Add”. Press “OK”. The item which yo u select will show on the “Name”.
_______________________________ eBox-2300SX-LS User ’ s Manual 52 caused by improper using “Regedit”. The way of editing system register in formation, please open “Changing Keys a nd V alues” in the Regedt32.exe of “Discr iption” or open “Add and Delete Infor mation in the Registry” and “Edit Registry Data” in the Regedt32.
_______________________________ eBox-2300SX-LS User ’ s Manual 53 Chapter 5 Technique Supporting Thank you for your supporting. If you have any installing problems, please call: Customer Service: (02)22980770 DMP Electronics Inc. Monday to Friday : AM 08:30-PM 17:30 Or E-mail to: info@compactpc.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il DMP Electronics EBOX-2300SX-LS è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del DMP Electronics EBOX-2300SX-LS - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso DMP Electronics EBOX-2300SX-LS imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul DMP Electronics EBOX-2300SX-LS ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il DMP Electronics EBOX-2300SX-LS, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del DMP Electronics EBOX-2300SX-LS.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il DMP Electronics EBOX-2300SX-LS. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo DMP Electronics EBOX-2300SX-LS insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
