Manuale d’uso / di manutenzione del prodotto 460MAX del fabbricante Directed Electronics
Vai alla pagina of 40
460MAX Owner’s Guide.
.
1 © 2008 Directed Electronics - All rights reserved. Contents What is included ...................................................................................... 2 Standard transmitter configuration ...............................................
2 © 2008 Directed Electronics- All rights reserved. What is included One control module • A pair of four button transmitters, (p/n 7142P) • A Stinger® Doubleguard® dual-stage shock sensor.
3 © 2008 Directed Electronics - All rights reserved. ➢ Three-button transmitter configuration* controls the Arm/Disarm function. controls the Panic function. controls Silent Mode™ and an Auxiliar y Output.
4 © 2008 Directed Electronics- All rights reserved. Impor tant information Congratulations on the purchase of your state-of-the-art vehicle se- cu ri ty system. This system has been designed to provide years of trouble-free op er a tion. Due to the complexity of this system, it must be installed by an authorized dealer only .
5 © 2008 Directed Electronics - All rights reserved. ➢ Y our warranty Y our warranty registration must be retur ned and the bar code se- rial number must not be removed.
6 © 2008 Directed Electronics- All rights reserved. T ransmitter functions The system uses a computer-based learn routine to learn the trans- mit ter buttons.
7 © 2008 Directed Electronics - All rights reserved. Button The panic feature is controlled by pressing this button for two seconds. and Buttons An optional auxiliar y convenience or expansion function that you have added to your system can be activated by pressing these buttons simultaneously .
8 © 2008 Directed Electronics- All rights reserved. Using your system The buttons used in the instructions in this manual correspond to the standard con fig u ra tion. Remember , this is not the only way your trans mit ter may be set up. It can be custom configured to meet your needs.
9 © 2008 Directed Electronics - All rights reserved. If any protected entr y point (such as a door or a switch-protected trunk or hood) is open, the system will not passively ar m (unless forced passive arming is programmed on). See Pro gram ming Op- tions section of this guide.
10 © 2008 Directed Electronics- All rights reserved. ➢ Multi-level security arming The Multi-Level Security Arming feature is available with the four- button transmitter only .
11 © 2008 Directed Electronics - All rights reserved. ignition, are now bypassed. Hold down the • to begin the Multi-Level Security Arming cycle over again. Note: Multi-Level Security Arming only applies to a single arming cycle.
12 © 2008 Directed Electronics- All rights reserved. ➢ Disarming T o disarm the system, press . Y ou will hear two chirps, and the parking lights will flash twice. If the power locks are connected to the system, the doors will unlock.
13 © 2008 Directed Electronics - All rights reserved. ➢ Disarming without a transmitter Th is fea tur e allo ws you to disa rm the secu rity sys te m wi th ou t th e re mo te tr an s m it t er sh ou ld it be lost , d am ag ed , o r d is ab le d.
14 © 2008 Directed Electronics- All rights reserved. ➢ Silent mode T o temporarily turn of f the arm or disarm chirps, use Silent Mode™. Press for less than one second before arming or disar ming, and the confirmation chirp(s) will be eliminated for that one op er- a tion only .
15 © 2008 Directed Electronics - All rights reserved. T o enter or exit V alet Mode: 1. T urn the ignition on. 2. T urn the ignition of f. 3. Press and release the V alet switch within 10 seconds. The status LED lights solidly if you are en ter ing V alet Mode, and goes out if you are exiting V alet Mode.
16 © 2008 Directed Electronics- All rights reserved. If the bypassed sensor tries to trigger the system while it is being bypassed, the 60-minute bypass period will star t over . This en- sures that a sensor that continually triggers will remain bypassed.
17 © 2008 Directed Electronics - All rights reserved. Diagnostics The microprocessor at the hear t of your security system is constant- ly mon i tor ing all of the switches and sensors that are connected to it. It detects any faulty switches and sensors and prevents them from disabling the entire system.
18 © 2008 Directed Electronics- All rights reserved. ➢ Disarming diagnostics Extra disarm chirps are the T amper Alert. If four chirps are heard when disarming, the system was triggered in your absence. If five chirps are heard, a zone was triggered so many times that Nui sance Prevention ® Circuitr y has bypassed that zone.
19 © 2008 Directed Electronics - All rights reserved. ➢ T able of zones The zone number is the number of LED flashes used by the system to identify that input. The standard input assignments are listed below , along with spaces to write in any optional sensors or switches you have had installed.
20 © 2008 Directed Electronics- All rights reserved. Code hopping The receiver and transmitters each use mathematical formulas called al go rithms to change their codes each time the transmit- ter is used. This technology has been developed to increase the security of the unit.
21 © 2008 Directed Electronics - All rights reserved. High frequency Y our system transmits and receives at 434 MHz, using a super- hetrodyne XR+ receiver . This provides a cleaner spec trum with less inter ference and a more stable signal. Enjoy a phe nom e nal increase in range – even in areas with high radio in ter fer ence.
22 © 2008 Directed Electronics- All rights reserved. Rapid resume logic This Directed system will store its current state to non-volatile mem- or y . If power is lost and then reconnected, the system will recall the stored state from memor y .
23 © 2008 Directed Electronics - All rights reserved. Programming options Programming options control what your system does during nor- mal op er a tion, and require few or no additional par ts. However , some may require additional in stal la tion labor .
24 © 2008 Directed Electronics- All rights reserved. Panic mode • en abled /dis abled with the ig ni tion on: Some states have laws against siren ca pa bil i ty in a mov ing ve- hicle.
25 © 2008 Directed Electronics - All rights reserved. Comfort closure: T o close the vehicles windows after remote • locking. Can only be used on cars with the capability of closing windows (and on some cars the sunroof) with the key cylinder in the door .
26 © 2008 Directed Electronics- All rights reserved. Siren tones and chirp volume: The output of the Revenger • ® Soft Chirp ® siren consists of six different tones in sequence. Any of these tones can be elim i nat ed by your dealer , re sult- ing in a unique, easily iden ti fi able siren sound.
27 © 2008 Directed Electronics - All rights reserved. V ehicle Recovery System (VRS) The optional VRS ® feature is designed to en sure that any un au- tho rized user of your vehicle (even if using your keys and remote control) will not be able to per ma nent ly separate you from your vehicle.
28 © 2008 Directed Electronics- All rights reserved. ➢ Arming the VRS T o arm the VRS ® , turn the ignition to the ON position and press the arm button on the remote transmitter for one second. The parking lights will flash and the siren will chirp once.
29 © 2008 Directed Electronics - All rights reserved. ➢ T riggered sequence Fif teen seconds after the last door has closed, the sys tem’ s status LE D w il l be gi n fla s hi ng . Th is del ay is int en ded t o all ow you tim e to di sta nc e your self from your ve hi cle in the event of a carjacking.
30 © 2008 Directed Electronics- All rights reserved. ➢ Disarming the VRS T ake the time to familiarize yourself with the VRS ® trig ger ing se- quence and the disarm pro ce dure. It is impor tant to recognize and identify the VRS trigger sequence and know how to disarm it in case of ac ci den tal activation.
31 © 2008 Directed Electronics - All rights reserved. Glossary of terms Control Unit : The “brain” of your system. Usually hidden un- der the dash area of the vehicle. It houses the microprocessor which monitors your vehicle and controls all of the system’ s functions.
32 © 2008 Directed Electronics- All rights reserved. Siren: Noise generating device usually installed in the engine com part ment of the vehicle. It is responsible for generating the “chirps” you hear , as well as the six tones you hear while the alarm is triggered.
33 © 2008 Directed Electronics - All rights reserved. Security & convenience expansions Listed below are some of the many expansion options avail able.
34 © 2008 Directed Electronics- All rights reserved. Power Window Control: Automatic power window control is pro- vid ed with the 529T and 530T systems. V alet® Start System: For the ultimate in convenience, the V alet® start system can start your vehicle, monitor engine functions, and power your climate control system with a push of a button.
35 © 2008 Directed Electronics - All rights reserved. Quick reference guide T o arm using your remote Y ou can activate, or ar m, the system by pressing on your transmitter for one second. When the system arms, you will hear a short siren sound, or chirp, and the parking lights will flash once.
36 © 2008 Directed Electronics- All rights reserved. Limited lifetime consumer warranty Directed Electronics. (“Directed”) promises to the original purchaser to repair or re- place (at Directed.
37 © 2008 Directed Electronics - All rights reserved. THEFT , DAMAGE AND/OR V ANDALISM. THIS W ARRANTY DOES NOT COVER LABOR COSTS FOR MAINTENANCE, REMOV AL OR REINST ALLA TION OF THE UNIT OR ANY CONSEQUENTIAL DAMAGES OF ANY KIND.
Directed Electronics Vista, CA 92081 www.directed.com © 2008 Directed Electronics - All rights reserved G3105P 2008-12 The company behind this system is Directed Elec tron ics. Since its inception, Directed ® has had one purpose, to provide consumers with the finest vehicle security and car stereo products and accessories available.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Directed Electronics 460MAX è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Directed Electronics 460MAX - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Directed Electronics 460MAX imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Directed Electronics 460MAX ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Directed Electronics 460MAX, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Directed Electronics 460MAX.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Directed Electronics 460MAX. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Directed Electronics 460MAX insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
