Manuale d’uso / di manutenzione del prodotto AVRX3100WBKE2 del fabbricante Denon
Vai alla pagina of 272
. AVR-X3100W INTEGRATED NETWORK AV RECEIVER Owner’s Manual You can print more than one page of a PDF onto a single sheet of paper. Contents Connections Playback Settings Tips Appendix 1 Front panel .
Accessories 7 Inserting the batteries 8 Operating range of the remote control unit 8 Features 9 High quality sound 9 High performance 9 Easy operation 12 Part names and functions 13 Front panel 13 Dis.
Playing an iPod 60 Listening to music on an iPod 61 iPod Browse Mode settings 62 Performing repeat playback 64 Performing random playback 64 Playing a USB memory device 65 Playing files stored on USB .
AirPlay function 95 Playing songs from your iPhone, iPod touch or iPad 96 Playing iTunes music with this unit 96 Selecting multiple speakers (devices) 97 Perform iTunes playback operations with the re.
Settings Menu map 137 Menu operations 140 Inputting characters 141 Using the keyboard screen 142 Audio 143 Dialog Level Adjust 143 Subwoofer Level Adjust 143 Surround Parameter 144 Restorer 148 Audio .
Network 189 Information 189 Connection 189 Wi-Fi Setup 190 Settings 192 IP Control 193 Friendly Name 194 Diagnostics 194 Maintenance Mode 195 General 196 Language 196 ECO 196 ZONE2 Setup 198 Zone Rena.
Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories Check that the following parts are supplied with the product.
Inserting the batteries 1 Remove the rear lid in the direction of the arrow and remove it. . 2 Insert two batteries correctly into the battery compartment as indicated. . R03/AAA batteries 3 Put the rear cover back on. NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one.
Features High quality sound 0 With discrete circuit technology, the power amplifier provides identical quality for all 7-channels (135 Watts x 7-channels) For optimum realism and stunning dynamic range, the power amplifier section features discrete power devices (not integrated circuitry).
0 Digital video processor upscales analog video signals (SD resolution) to HD (720p/1080p) and 4K ( v p. 163) . 4K 4K 4K Up scaling Up to 1080p This unit is equipped with a 4K video upscaling function that allows analog video or SD (Standard Definition) video to be output via HDMI at 4K (3840 × 2160 pixels) resolution.
0 The device is equipped with a AirPlay ® function in addition to network functions such as Internet radio etc. ( v p. 95) . You can enjoy a wide variety of content, including listening to Internet Radio, playing audio files stored on your PC, and displaying photographs stored on your PC on our television.
0 Multi-Room audio ( v p. 109) . 【 MAIN ZONE 】【 ZONE2 】 You can select and playback the respective inputs in the MAIN ZONE and in ZONE2. In addition, when the All Zone Stereo function is used,.
Part names and functions Front panel . MASTER VOLUME SOURCE SELECT ONLINE MEDIA PLAYER Blu-ray CBL/SAT 3 2 14 ZONE2 ON/OFF ZONE2 SOURCE DIMMER STATUS TUNER PRESET CH SETUP MIC AUX 1 - HDMI PHONES QUIC.
. MASTER VOLUME SOURCE SELECT ONLINE MEDIA PLAYER Blu-ray CBL/SAT 3 2 14 ZONE2 ON/OFF ZONE2 SOURCE DIMMER STATUS TUNER PRESET CH SETUP MIC AUX1 - HDMI PHONES QUICK SELECT ty q e w r u i o Q0 Q1 A Power operation button ( X ) Used to turn the power of the MAIN ZONE (room where this unit is located) on/off (standby).
. MASTER VOLUME SOURCE SELECT ONLINE MEDIA PLAYER Blu-ray CBL/SAT 3 2 14 ZONE2 ON/OFF ZONE2 SOURCE DIMMER STATUS TUNER PRESET CH SETUP MIC AUX1 - HDMI PHONES QUICK SELECT Q2 Q 6 Q 4 Q 5 Q 3 L QUICK SE.
Display . io u y t r e w q Q0 Q1 Q2 H I J K L A Input mode indicators These light according to the audio input mode settings of each input source. ( v p. 170) B Surround back indicator This lights when audio signals are being output from the surround back speakers.
. io Q 2 Q 1 Q 0 H Volume indicator I MUTE indicator This blinks while the sound is muted. ( v p. 59, 136) J Information display The input source name, sound mode, setting values and other information are displayed here. K Input signal indicators The respective indicator will light corresponding to the input signal.
Rear panel . q oQ 0 Q1 Q2 Q3 Q4 wr t e u y qi A B C D E F G A H I J K L M N Contents Connections Playback Settings Tips Appendix 18 Front panel Display Rear panel Remote Index.
N . u qi qw r t e y A Rod antennas for Bluetooth/wireless LAN Stand this antenna upright when connecting to a network via wireless LAN, or when connecting to a handheld device via Bluetooth. ( v p. 53) . 90° 320° 320° 90° The antenna clip can be removed from the rear panel.
. oQ 0 Q 1 Q 2 Q 3 Q 4 I TRIGGER OUT jack Used to connect devices equipped with the trigger function. ( v p. 55) J FM/AM antenna terminals (ANTENNA) Used to connect FM antennas and AM loop antennas. ( v p. 50) K Analog audio connectors (AUDIO) Used to connect devices equipped with analog audio connectors.
Remote control unit . q w e t r u y A ZONE SELECT buttons (MAIN, ZONE2) These switch the zone (MAIN ZONE, ZONE2) that is operated through the remote control unit.
. Q0 o Q2 Q1 i H System buttons These perform playback related operations. ( v p. 62) 0 Skip buttons ( 8 , 9 ) 0 Play/pause button ( 1 / 3 ) Tuning up / Tuning down buttons (TUNE +, –) These select either FM broadcast or AM broadcast.
. Q3 Q5 Q4 Q8 Q6 Q7 M POWER button ( X ) This turns the power on/off. ( v p. 58, 135) N ECO Mode button ( G ) This switches to ECO Mode. ( v p. 196) O VOLUME buttons ( df ) These adjusts the volume level. ( v p. 59, 136) P OPTION button This displays the option menu on the TV screen.
o Contents Connecting speakers 25 Connecting a TV 41 Connecting a playback device 44 Connecting an iPod or USB memory device to the USB port 48 Connecting an FM/AM antenna 50 Connecting to a home netw.
Connecting speakers Install speakers and connect them to this unit. ( v p. 25, 29) Speaker installation Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Speaker installation is explained using this example of a typical installation.
0 This unit is compatible with Audyssey DSX ® ( v p. 246), Dolby Pro Logic g z ( v p. 248) and DTS Neo:X ( v p. 249) which offers an even wider and deeper surround sensation. When using Audyssey DSX ® , install front wide speakers or front height speakers.
o When 7.1-channel speakers are installed using surround back speakers . z 1 z 2 z 3 FL SW C SL SBL FR SR SBR Listening position z 1:22° - 30° z 2:90° - 110° z 3:135° - 150° When using a single surround back speaker, place it directly behind the listening position.
o When 7.1-channel speakers are installed using front wide speakers . z 3 z 2 z 1 FL SW C SL FR SR FWL FWR z 1: 22° - 30° z 2: 55° - 60° z 3: 90° - 110° o When 5.
Speaker connection Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. NOTE 0 Disconnect this unit’s power plug from the power outlet before connecting the speakers. Also, turn off the subwoofer.
o Connecting the speaker cables Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly.
o About the speaker cable label (supplied) for channel identification The channel display section for speaker terminals on the rear panel is color-coded for each channel to be identifiable.
Speaker configuration and “Amp Assign” settings This unit has a built-in 7-channel power amplifier. In addition to the basic 5.1-channel system, a variety of speaker systems can be configured by changing the “Amp Assign” ( v p. 181) settings to suit the application, such as 7.
o Standard configuration and connection n 5.1-channel This serves as a basic 5.1-channel surround system. Sound modes such as Dolby Pro Logic g are supported.
n 7.1-channel (surround back) This 7.1-channel surround system is the same as a basic 5.1-channel system but with surround back speakers. Sound modes such as Dolby Pro Logic g x are supported. . FL SW SL FR SR SBR SBL . SBR SBL SL FL FR C SR SW SW When using a single surround back speaker, connect it to the SURROUND BACK L terminal.
n 7.1-channel (front height) This 7.1-channel surround system is the same as a basic 5.1-channel system but with front height speakers. Sound modes such as Dolby Pro Logic g z are supported.
n 7.1-channel (front wide) This 7.1-channel surround system is the same as a basic 5.1-channel system but with front wide speakers. Sound modes such as DTS Neo:X are supported.
o Applied configuration and connection n 5.1-channel (bi-amp connection of front speaker) This is a method of connecting separate amplifiers to the tweeter terminals and woofer terminals of bi-amp compatible speakers.
n 5.1-channel + front speaker of second unit This system enables switching playback between front speakers A and B as desired. . SW C SL SR FL FL (B) (A) FR FR (A) (B) .
n 5.1-channel (MAIN ZONE) + 2-channel (ZONE2) This connection method constructs a 5.1-channel speaker system in the MAIN ZONE and a 2-channel system in ZONE2.
o Connecting an external power amplifier 0 You can use this unit as a pre-amp by connecting an external power amplifier to the PRE OUT connectors. By adding a power amplifier to each channel, the realness of the sound can be further enhanced. 0 Select the terminal to use and connect the device.
Connecting a TV Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit. How to connect a TV depends on the connectors and functions equipped on the TV. ARC (Audio Return Channel) function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.
Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit. Set “HDMI Control” to “On” when using a TV that supports the ARC function.
Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) Use an HDMI cable to connect the TV to this unit.
Connecting a playback device This unit is equipped with three types of video input connectors (HDMI, component video and composite video) and three types of audio input connectors (HDMI, digital audio and audio). Select input connectors on this unit according to the connectors equipped on the device you want to connect.
Connecting a DVD player or Blu-ray Disc player This explanation uses the connection with a DVD player or Blu-ray disc player as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to.
Connecting a set-top box (Satellite tuner/cable TV) This explanation uses the connection with a satellite tuner/cable TV STB as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to.
Connecting a video camcorder or game console This explanation uses the connection with a video camcorders as an example. Connect a playback device to this unit, such as a video camcorder or game console.
Connecting an iPod or USB memory device to the USB port To connect an iPod to this unit, use the USB adapter cable that was supplied with the iPod. For operating instructions see “Playing an iPod” ( v p. 60) or “Playing a USB memory device” ( v p.
o Supported iPod/iPhone models . • iP od classic • iP od nano • iP od touc h • iPhone Contents Connections Playback Settings Tips Appendix 49 Front panel Display Rear panel Remote Index.
Connecting an FM/AM antenna Connect the antenna, tune in to a broadcast and then move the antenna to the location where there is least noise. Then use tape, etc. to fix the antenna in this location. (“Listening to FM/AM broadcasts” ( v p. 74)) If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna.
o Using the AM loop antenna Suspending on a wall Suspend directly on a wall without assembling. . Nail, tack, etc. Standing alone Use the procedure shown above to assemble.
Connecting to a home network (LAN) This unit can connect to a network using a wired LAN or wireless LAN. You can connect this unit to your home network (LAN) to enable various types of playback and operations as described below.
Wireless LAN When connecting to a wireless LAN network, stand the Rod antennas for Bluetooth/wireless LAN connection upright on the rear panel. See “Wi-Fi Setup” ( v p.
Connecting an external control device REMOTE CONTROL jacks When this unit is installed in a location where the remote control signals cannot reach (installation in a cabinet etc.), it can still be controlled by the remote control by connecting a remote control receiver unit (sold separately).
TRIGGER OUT jack When a device with TRIGGER IN jack is connected, the connected device’s power on/standby can be controlled through linked operation to this unit.
Connecting the power cord After completing all the connections, insert the power plug into the power outlet. . T o household pow er outlet P ow er cord (supplied) (A C 230 V , 50/60 Hz) Contents Conne.
o Contents Basic operation Turning the power on 58 Selecting the input source 58 Adjusting the volume 59 Turning off the sound temporarily (Muting) 59 Selecting a sound mode 110 Playback a device Play.
Basic operation . MUTE POWER VOLUME X df : Input source select buttons Turning the power on 1 Press POWER X to turn on power to the unit. 0 You can press the input source select button when the unit is in standby mode to turn on the power. 0 You can also switch the power to standby by pressing X on the main unit.
Adjusting the volume 1 Use VOLUME df to adjust the volume. 0 The variable range differs according to the input signal and channel level setting. 0 You can also adjust the master volume by turning MASTER VOLUME on the main unit. Turning off the sound temporarily (Muting) 1 Press MUTE : .
Playing an iPod . 1 / 3 8 9 iPod/USB uio p ENTER OPTION CH/PAGE df BACK 0 You can use the USB cable provided with the iPod to connect the iPod with the unit’s USB port and enjoy music stored on the iPod. 0 For information on the iPod models that can be played back with this unit, see “Supported iPod/iPhone models” ( v p.
Listening to music on an iPod 1 Connect the iPod to the USB port. ( v p. 48) 2 Press iPod/USB to switch the input source to “iPod/ USB”. “Browse from iPod” is displayed on the display of this unit. 0 Nothing is displayed on the TV screen. 3 Operate iPod itself while seeing the iPod screen to play back music.
iPod Browse Mode settings In this mode, various lists and screens during playback on the iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on the iPod in “On-Screen”. 1 Press OPTION when the input source is “iPod/USB”.
o Operations accessible through the option menu This can be operated when the “iPod Browse Mode” is set to “On- Screen”. ( v p. 62) 0 “iPod Browse Mode settings” ( v p. 62) 0 “Performing repeat playback” ( v p. 64) 0 “Performing random playback” ( v p.
Performing repeat playback 1 Press OPTION with “iPod Browse Mode” set to “On- Screen”. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER. 3 Use o p to select repeat playback mode. Off (Default) : Repeat playback mode is canceled.
Playing a USB memory device . 1 / 3 8 9 iPod/USB ui p ENTER OPTION CH/PAGE df BACK 0 Playing back music or viewing still picture (JPEG) files stored on a USB memory device. 0 Only USB memory devices conforming to mass storage class standards can be played on this unit.
Playing files stored on USB memory devices 1 Connect the USB memory device to the USB port. ( v p. 48) 2 Press iPod/USB to switch the input source to “iPod/ USB”. . Folder1 Folder2 Folder3 Music1 Music2 Music3 Music4 OPTION OPTION USB [1/9] Option 3 Use ui p to select the file to be played, then press ENTER.
o Operations accessible through the option menu 0 “Performing repeat playback” ( v p. 100) 0 “Performing random playback” ( v p. 100) 0 “Searching content with keywords (Text Search)” ( v p. 102) 0 “Playing back music and a favorite picture at the same time (Slideshow)” ( v p.
Listening to music on a Bluetooth device . 1 / 3 8 9 ui ENTER OPTION Bluetooth BACK Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device.
Pairing with a Bluetooth device In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. 1 Press Bluetooth to switch the input source to “Bluetooth”.
Playing a Bluetooth device Check the following before you play back music. 0 The Bluetooth function of the Bluetooth device must be turned on 0 Pairing must be completed 1 Press Bluetooth to switch the input source to “Bluetooth”. The unit will automatically connect to the most recently used Bluetooth device.
NOTE 0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth device needs to support the AVRCP profile. 0 The remote control of this unit is not guaranteed to work with all Bluetooth devices.
Pairing with the Pairing Mode Pair a Bluetooth device with this unit. 1 Press OPTION when the input source is “Bluetooth”. The option menu screen is displayed. 2 Use ui to select “Pairing Mode”, then press ENTER. The device will go into the pairing mode.
Listening to FM/AM broadcasts . TUNER uio p ENTER CH/PAGE df BACK TUNE +, – OPTION You can use the built-in tuner of this unit to listen to FM broadcasts and AM broadcasts. Make sure the FM antenna and AM loop antenna are connected to this unit first.
Listening to FM/AM broadcasts 1 Connect the antenna. (“Connecting an FM/AM antenna” ( v p. 50)) 2 Press TUNER to switch the input source to “Tuner”. G TV screen H . TUNE+/- TUNE+/- STEREO AUTO CH / CH / OPTION OPTION Tuner FM 87.50MHz Now Playing Tune Preset Option CH 1 G Display of this unit H .
o Operations accessible through the option menu 0 “Tuning in by entering the frequency (Direct Tune)” ( v p. 75) 0 “RDS search” ( v p. 76) 0 “PTY search” ( v p. 76) 0 “TP search” ( v p. 77) 0 “Radio Text” ( v p. 78) 0 “Changing the tune mode (Tune Mode)” ( v p.
RDS search RDS is a broadcasting service which allows a station to send additional information along with the regular radio program signal. Use this function to automatically tune to FM stations that provide the RDS service. Note that the RDS function only works when receiving RDS compatible stations.
1 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. 2 Use ui to select “PTY Search”, then press ENTER. 3 Use ui to call out the desired program type.
Radio Text RT allows RDS stations to send text messages that appear on the display. “Radio text” appears on the display when radio text data is received. 1 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. 2 Use ui to select “Radio text”, then press ENTER.
Tuning in to stations and presetting them automatically (Auto Preset Memory) A maximum of 56 radio stations can be automatically preset. 1 Press OPTION when the input source is “Tuner”. The option menu screen is displayed. 2 Use ui to select “Auto Preset Memory”, then press ENTER.
Channel Default settings 1 – 8 87.50 / 89.10 / 98.10 / 108.00 / 90.10 / 90.10 / 90.10 / 90.10 MHz 9 – 16 90.10 / 90.10 / 90.10 / 90.10 / 90.10 / 90.10 / 90.10 / 90.10 MHz 17 – 24 90.10 / 90.10 / 90.10 / 90.10 / 90.10 / 90.10 / 90.10 / 90.10 MHz 25 – 32 90.
5 Use ui to select a name label, then press ENTER. The screen that lets you edit the Preset Name is displayed. 0 If you select “Set Defaults”, then the unit returns to displaying the frequency. 6 Enter the characters, then press “OK”. 0 For character input, see “Using the keyboard screen” ( v p.
.
Listening to Internet Radio . 1 / 3 uio p ENTER CH/PAGE df BACK OPTION ONLINE MUSIC INTERNET RADIO 0 Internet Radio refers to radio broadcasts distributed over the Internet. Internet Radio stations from around the world can be received. 0 The Internet radio station list on this unit the database service provided by vTuner radio station.
Listening to Internet Radio 1 Prepare for playback. 0 Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” ( v p. 52)) 2 Press ONLINE MUSIC. 0 You can also press INTERNET RADIO to select the input source “Internet Radio” directly.
5 Use ui p to select the station, then press ENTER. Playback starts once buffering reaches “100%”. Operation buttons Function 1 / 3 Playback / Stop ENTER (Press and hold) Stop CH/PAGE d f Switch to the previous page/next page in the list display 0 The display switches between track title and radio station name etc.
Using vTuner to add Internet Radio stations to favorites There are many Internet Radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations.
Playing back files stored on a PC and NAS . uio p 8 9 ENTER OPTION CH/PAGE df 1 / 3 BACK ONLINE MUSIC 0 This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. 0 The network audio playback function of this unit connects to the server using technologies shown below.
Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. If you are using a Media Server, be sure to apply this setting first. . o When using Windows Media Player 12 (Windows 7 / Windows 8) 1 Start up Windows Media Player 12 on the PC.
Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. A Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” ( v p. 52)) B Prepare the computer.
0 The display switches between track title, artist name, and album title each time the main unit’s STATUS is pressed. 0 When a WMA (Windows Media Audio), MP3 or MPEG-4 AAC file includes album art data, the album art can be displayed while the music files are playing.
Viewing photographs on the Flickr site . uio p ENTER OPTION CH/PAGE df BACK ONLINE MUSIC 0 Flickr is an online photo sharing service. You can use this unit to view photographs that have been made public by Flickr users. You do not need an account to use Flickr.
Viewing photographs shared by particular users 1 Prepare for playback. 0 Check the network environment, then turn on this unit’s power. (“Connecting to a home network (LAN)” ( v p. 52)) 2 Press ONLINE MUSIC. 3 Use uio p to select “Flickr”, then press ENTER.
8 Use ui to select the folder, then press ENTER. Favorites : Displays the favorite photographs of the specified user. Photostream : Displays a list of shared photographs. PhotoSets : Displays the folder (photograph album) list. Contacts : Displays the screen name used by the specified user in Contacts.
Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER. 2 Use ui to select the folder, and then press ENTER. Interestingness : Displays photographs that are popular from the number of user comments or number of times they are added as favorites.
AirPlay function Music files stored on your iPhone, iPod touch, iPad or iTunes can be played on this unit via the network. 0 + is displayed on the menu screen while AirPlay is being operated. 0 Source input will be switched to “Online Music” when AirPlay playback is started.
Playing songs from your iPhone, iPod touch or iPad If you update your “iPhone/iPod touch/iPad” to iOS 4.2.1 or later, you can stream music stored in your “iPhone/iPod touch/iPad” directly to this unit. 1 Connect your iPhone, iPod touch or iPad Wi-Fi to the same network as this unit.
Selecting multiple speakers (devices) It is possible to play iTunes songs on your home’s AirPlay compatible speakers (devices) other than those of this unit. 1 Click the AirPlay icon ' and select “Multiple”. 2 Check the speakers you want to use.
Spotify Connect function Spotify is the world’s most popular streaming service. If you subscribe to Spotify Premium, you can control your new speaker with your phone or tablet. Because Spotify is built-in to your speaker, you can still take calls or use other apps - the music never stops.
Convenience functions . MAIN uio p ENTER OPTION ONLINE MUSIC This section explains how to use convenient functions that can be used for each input source.
Performing repeat playback n Supported input sources : USB / Media Server / Bluetooth 1 While content is playing, press OPTION. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER. 3 Use o p to select repeat playback mode.
Registering to Favorites You can register a total of 100 favorites. n Supported input sources: Internet Radio / Media Server 1 While content is playing, press OPTION. The option menu screen is displayed. 2 Use ui to select “Save to Favorites”, then press ENTER.
Deleting content added to favorites 1 Press ONLINE MUSIC. 2 Use uio p to select “Favorites”, then press ENTER. 3 Use ui to select the content you want to delete from favorites, then press OPTION. The option menu screen is displayed. 4 Use ui to select “Remove from Favorites”, then press ENTER.
Playing back music and a favorite picture at the same time (Slideshow) n Supported input sources : USB 1 Play back a still picture. 0 Playing back still pictures stored on USB memory devices. ( v p. 66) 2 Play back a music file. ( v p. 66) 3 Press OPTION.
Setting the Slideshow Interval Set the playback interval when playing back a slideshow of still picture (JPEG) files stored on a USB memory device or media server, or on the Flickr website. n Supported input sources : USB / Media Server / Flickr 1 While the list is displayed, press OPTION.
Adjusting the volume of each channel to match the input source (Channel Level Adjust) The volume of each channel can be changed while listening to music. You can set this for each input source. 1 Press OPTION. The option menu screen is displayed. 2 Use ui to select “Channel Level Adjust”, then press ENTER.
Adjusting the tone (Tone) Adjusts the tonal quality of the sound. 1 Press OPTION. The option menu screen is displayed. 2 Use ui to select “Tone”, then press ENTER. The Tone screen is displayed. 3 Use o p to set the tone control function to on/off.
Displaying your desired video during audio playback (Video Select) This unit can display video from a different source on TV during audio playback. You can set this for each input source.
Adjusting the picture quality for your viewing environment (Picture Mode) n Supported input sources : CBL/SAT / DVD / Blu-ray / Game / AUX1 / AUX2 / Media Player / iPod/USB / Online Music / CD z / TV Audio z z You can set the picture mode when an HDMI, component video or video connector is assigned.
Playing the same music in all zones (All Zone Stereo) You can play back the music being played back in MAIN ZONE simultaneously in ZONE2 (another room). It is useful when you want to enjoy the same music at the same time in multiple rooms during home party or when you want to play back the same BGM in the entire house.
Selecting a sound mode . PURE MOVIE MUSIC GAME ui This unit allows you to enjoy various kinds of surround and stereo playback modes. Disc formats such as Blu-ray Disc and DVD, as well as being supported by digital broadcasting, and even by streaming movies and music from internet-based subscription services.
Selecting a sound mode 1 Press MOVIE, MUSIC or GAME to select a sound mode. MOVIE : Switches to the sound mode suitable for enjoying movies and TV programs. MUSIC : Switches to the sound mode suitable for enjoying music. GAME : Switches to the sound mode suitable for enjoying games.
Direct playback Sound recorded in source is played as is. 1 Press PURE to select “Direct”. Direct playback begins. While DSD signals are played back, “DSD Direct” is displayed. Pure Direct playback This mode is for playback with higher sound quality than in Direct playback mode.
Auto surround playback This mode detects the type of input digital signal, and automatically selects the corresponding mode for playback. Perform stereo playback when the input signal is PCM. When the input signal is Dolby Digital or DTS, the music is played back according to the respective channel number.
o Description of sound mode types Dolby sound mode Sound mode type Description Dolby PL g x z 1 This mode can be selected when the Dolby PL g x decoder is used to play back 2-channel sources in 6.1/7.1-channel surround sound including the surround back channel(s).
DTS sound mode Sound mode type Description DTS Neo:X This matrix decoding technology uses the DTS Neo:X decoder to playback 2-channel source or 5.1/6.1-channel surround sources as a maximum of 7.
PCM multi-channel sound mode Sound mode type Description Multi Ch In This mode can be selected when playing multi-channel PCM/DSD sources. Audyssey DSX ® sound mode Sound mode type Description Audyssey DSX ® (A-DSX) z This mode creates playback for the new channels (front wide or front height) in 5.
Original sound mode Sound mode type Description Multi Ch Stereo This mode is for enjoying stereo sound from all speakers. Stereo audio (2-channel) sources are played back via the front (L/R) speakers, the surround speakers and surround back speakers (if connected).
Stereo sound mode Sound mode type Description Stereo This mode plays 2-channel stereo audio with no additional surround sound processing. 0 Sound is output from the front left and right speakers, and subwoofer if connected.
o Sound mode that can be selected for each input signal 0 The following sound modes can be selected using the MOVIE, MUSIC and GAME buttons. 0 Adjust the sound field effect with the menu “Surround Parameter” to enjoy surround sound the way you like it.
Input signal Sound mode Sound mode MOVIE MUSIC GAME Multi-channel z 4 Stereo S S S Dolby Digital Dolby Digital S S S Dolby Digital EX S S S Dolby Digital + PL g x Cinema S Dolby Digital + PL g x Music.
Input signal Sound mode Sound mode MOVIE MUSIC GAME Multi-channel z 4 Dolby Digital Plus Dolby Digital Plus S S S Dolby Digital Plus + EX S S S Dolby Digital Plus + PL g x Cinema S Dolby Digital Plus .
Input signal Sound mode Sound mode MOVIE MUSIC GAME Multi-channel z 4 DTS-HD / DTS Express DTS-HD Hi Res S S S DTS-HD Mstr S S S DTS-HD Mstr A-DSX z 3 S S S DTS Express S S S DTS Express A-DSX z 3 S S.
Input signal Sound mode Sound mode MOVIE MUSIC GAME Multi-channel z 4 Multi Ch Stereo S S S Mono Movie S Rock Arena S Jazz Club S Matrix S Video Game S Virtual S S S z 4 The sound mode that can be selected differs depending on the audio format of the input signal and the number of channels.
o Views on the display . + PL z DVD q w A Shows a decoder to be used. 0 A Dolby Digital Plus decoder is displayed as “ H ”. B Shows a decoder that creates sound output. 0 “+ PL g z” indicates that the PL g z decoder is being used, and that front height channel sound is being created.
HDMI control function A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with another device via the HDMI cable connection. Setting procedure 1 Enable the HDMI control function of this unit.
Sleep timer function . ZONE2 SLEEP MAIN You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going to sleep.
Using the sleep timer 1 Press MAIN or ZONE2 to select the operating zone with the remote control. The button for the selected zone is lit. 2 Press SLEEP and display the time you want to set. 0 The SLEEP indicator lights up on the display and the sleep timer starts.
Quick select plus function . QUICK SELECT 1 – 4 Settings such as the input source, volume level and sound mode can be registered to the QUICK SELECT 1 - 4 buttons. You can simply press one of the registered QUICK SELECT buttons in subsequent playbacks to switch to the group of saved settings in a batch.
Calling up the settings 1 Press MAIN or ZONE2 to select the operating zone with the remote control. The button for the selected zone is lit. 2 Press QUICK SELECT. The Quick Select settings registered to the button you pressed are called up. 0 The default settings for the input source and volume are as shown below.
Changing the settings 1 Set the items below to the settings you want to register. The following settings from A to H can be memorized for MAIN ZONE, and settings A and B can be memorized for ZONE2. A Input source ( v p. 58) B Volume ( v p. 59) C Sound mode ( v p.
Web control function You can control this unit from a web control screen on a web browser. . This unit PC Router Tablet 0 This unit and the PC or tablet need to be connected correctly to the network in order to use the web control function. (“Connecting to a home network (LAN)” ( v p.
4 Enter the IP address of this unit in browser’s address box. For example, if the IP address of this unit is “192.168.100.19”, enter “http://192.168.100.19”. . http://192.168.100.19 File Edit View Tools Help Favorites 5 When the top menu is displayed, click on the menu item you want to operate.
Playback in ZONE2 (Separate room) You can operate this unit to enjoy video and audio in a room (ZONE2) that is different from the room where this unit is placed (MAIN ZONE). You can simultaneously play back the same source in both the MAIN ZONE and ZONE2.
o Connection 2: Connection through the speaker output terminals When “Assign Mode” ( v p. 181) is set to “ZONE2” in the menu, ZONE2 audio is output from the SURROUND BACK speaker terminal.
Playback in ZONE2 . MUTE ZONE2 POWER VOLUME df X : Input source select buttons 1 Press ZONE2 to set the operating zone to ZONE2 with the remote control. The ZONE2 button lights. 2 Press POWER X to turn on the ZONE2 power. The ( indicator on the display lights.
o Adjusting the volume Use VOLUME df to adjust the volume. 0 At time of purchase, “Volume Limit” is set to “70 （ –10 dB ） ”. ( v p. 199) Turn MASTER VOLUME after pressing ZONE2 SOURCE on the main unit to adjust the sound volume. o Turning off the sound temporarily (Muting) Press MUTE : .
Menu map When using menu operations, connect this unit to a TV and operate this unit while viewing the TV. The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences.
Setting items Detailed items Description Page . Inputs Input Assign Changes input connector assignment. 167 Source Rename Changes the display name for input source. 169 Hide Sources Removes from the display input sources that are not used. 169 Source Level Adjusts the playback level of the audio input.
Setting items Detailed items Description Page . General Language Changes the language of the display on the TV screen. 196 ECO Configures the ECO Mode and Auto Standby energy-saving functions. 196 ZONE2 Setup Sets ZONE2 audio playback settings. 198 Zone Rename Changes the display title of each zone to one you prefer.
. uio p ENTER SETUP BACK MAIN Menu operations 1 Press MAIN on the remote control unit to set the operating zone to the MAIN ZONE. The MAIN button lights. 2 Press SETUP. The menu is displayed on the TV screen. 3 Use ui p to select the menu to be set or operated, then press ENTER.
Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. 0 Preset Name ( v p. 80) 0 Text Search ( v p. 102) 0 Source Rename ( v p. 169) 0 Friendly Name ( v p. 194) 0 Zone Rename ( v p.
Using the keyboard screen 1 Display the screen for inputting characters. G Example H “Source Rename” screen . Inputs/Source Rename Changes the display name for this source CBL/SAT A N 0 $ B O 1 % .
Audio Make audio-related settings. Dialog Level Adjust This setting adjusts the output level to clarify the dialogue output from the center channel. o Dialog Level Adjust Set whether to adjust the dialog level or not. On: Enables the adjustment of the dialog level.
Surround Parameter You can adjust the surround audio sound field effects to match your preferences. The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode. For details on the adjustable parameters, see “Sound modes and surround parameters” ( v p.
o Dynamic Compression Compress dynamic range (difference between loud and soft sounds). Auto: Automatic dynamic range compression on/off control according to source. Low / Medium / High: These set the compression level. Off: Dynamic range compression is always off.
o Dimension Shift sound image center to front or rear to adjust playback balance. 0 – 6 (Default : 3) 0 You can set this when the sound mode is Dolby PL g / g x in the “Music” mode. 0 As you set a smaller number, the surround sound field shifts backward; as you set a larger number, the surround sound field shifts forward.
o Room Size Determine size of acoustic environment. Small: Simulate acoustics of a small room. Medium small: Simulate acoustics of a medium-small room. Medium (Default) : Simulate acoustics of a medium room. Medium large: Simulate acoustics of a medium-large room.
Restorer Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear.
Audio Delay Compensates for incorrect timing between video and audio. 0 ms – 200 ms (Default : 0 ms) 0 Audio Delay for game mode can be set when “Video Mode” is set to “Auto” or “Game”. ( v p. 161) 0 “Audio Delay” settings are stored for each input source.
Audyssey Set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® . These can be selected after Audyssey ® Setup has been performed. For additional information on Audyssey technology, please see “Explanation of terms” ( v p.
o Dynamic EQ Solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Works with MultEQ ® XT. On (Default) : Use Dynamic EQ. Off: Do not use Dynamic EQ. When the menu “Dynamic EQ” setting is “On”, it is not possible to do “Tone Control” adjustment.
o Dynamic Volume Solves the problem of large variations in volume level between TV, movies and other content (between quiet passages and loud passages, etc.) by automatically adjusting to the user’s preferred volume setting. Heavy: Most adjustment to softest and loudest sounds.
o Stage Width Adjust sound stage width when using front wide speakers. - 10 – +10 (Default : 0) o Stage Height Adjust sound stage height when using front height speakers. - 10 – +10 (Default : 0) Graphic EQ Uses the graphic equalizer to adjust the tone of each speaker.
o Speaker Selection Select whether to adjust tones for individual speakers or for all speakers. All: Adjust all speaker tones together. Left/Right (Default) : Adjust the left and right speaker tones together. Each: Adjust the tone for each speaker. o Adjust EQ Adjust tonal balance for each frequency band.
Video Make video-related settings. Picture Adjust Picture quality can be adjusted. 0 Can be set when the “Video Conversion” setting is “On”. ( v p. 162) 0 Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source.
0 The two special adjustment modes, ISF Day and ISF Night, should be used by a certified technician to adjust the color calibration to match the installation conditions. We recommend that the settings and adjustments be carried out by an ISF- certified technician.
o Noise Reduction Reduce overall video noise. Low / Medium / High / Off (Default : Off) o Enhancer Emphasize picture sharpness. 0 – +12 (Default : 0) HDMI Setup Make settings for HDMI video/audio output. NOTE When “HDMI Pass Through” and “HDMI Control” is set to “On”, it consumes more standby power.
o HDMI Audio Out Select HDMI audio output device. AVR (Default) : Play back through speakers connected to the unit. TV: Play back through TV connected to the unit. 0 When the HDMI control function is activated, priority is given to the TV audio setting.
o HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI Control. On: Use HDMI control function. Off (Default) : Do not use HDMI control function. 0 Please consult the operating instructions for each connected device to check the settings.
o TV Audio Switching Sets automatic switching to the “TV Audio” input when a TV connected via HDMI sends an appropriate CEC control command to the AVR. On (Default) : Select the “TV Audio” input automatically when receiving a command from the TV.
Output Settings Makes settings for video output. 0 Can be set when “HDMI”, “COMP” or “VIDEO” ( v p. 168) is assigned for each input source. 0 “Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/p Scaler” is set to anything other than “Off”.
o Video Conversion The input video signal is converted automatically in conjunction with the connected TV. (“Video conversion function” ( v p. 233)) On (Default) : The input video signal is converted. Off: The input video signal is not converted. o i/p Scaler Set the video input signal to be subjected to i/p scaler processing.
n When the input source is set to “iPod/USB” and “Online Music” On (Default) : Use i/p scaler function. Off: Do not use i/p scaler function. 0 “Analog & HDMI” can be set for input sources for which an HDMI input connector is assigned. 0 Which items can be set depend on the input source assigned to each input connector.
o Progressive Mode Set an appropriate progressive conversion mode for the source video signal. Auto (Default) : The video signal is automatically detected and the appropriate mode is set. Video: Select mode suitable for video playback. Video and Film: Select mode suitable for video and 30- frame film material playback.
On Screen Display Select the on-screen display user interface preferences. o Volume Sets where to display the volume level. Bottom (Default) : Display at the bottom.
TV Format Set the video signal format to be output for the TV you are using. o Format PAL (Default) : Select PAL output. NTSC: Select NTSC output. “Format” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting.
Inputs Perform settings related to input source playback. You do not have to change the settings to use the unit. Make settings when needed. Input Assign By making connections as indicated by the inpu.
o HDMI Set this to change the HDMI input connectors assigned to the input sources. 1 / 2 / 3 / 4 / 5 / 6 / 7 / Front: Assign an HDMI input connector to the selected input source. – : Do not assign an HDMI input connector to the selected input source.
Source Rename Change the display name for input source. This is convenient when the name of your device and the input source name of this unit are different. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen.
Input Select Set the audio input mode and decode mode of each input source. The input modes available for selection may vary depending on the input source. “Input Select” settings are stored for each input source. o Input Mode Set the audio input modes for the different input sources.
Speakers The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Setup”. You do not have to perform Audyssey ® Setup when you have already performed “Speaker Calibration” in “Setup Assistant”.
o About the main listening position The main listening position is the position where listeners would normally sit or where one would normally sit alone within the listening environment. Before starting Audyssey ® Setup, place the Sound calibration microphone in the main listening position.
Procedure for speaker settings (Audyssey ® Setup) . Finish Check Calculation & Store Measurement Preparation 1 Attach the Sound calibration microphone to the supplied microphone stand or own tripod and install it at the main listening position.
3 Connect the Sound calibration microphone to the SETUP MIC jack of this unit. . When the Sound calibration microphone is connected, the follo wing screen is display ed.
6 When the following screen is displayed, select “Begin Test” and then press ENTER. Start the measurement of the first position. . Begin Test Back Select “Begin Test” to start the calibration. NOTE: You will hear a series of loud chirps starting and stopping during the tests.
8 Move the Sound calibration microphone to position 2, select “Continue”, then press ENTER. The measurement of the second position starts. Measurements can be made in up to eight positions.
11 Perform the settings for Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® . The following screen is displayed during the analysis. Configure the settings as preferred. . Audyssey Setup Audyssey Dynamic EQ maintains bass, clarity and surround sound at low volumes letting you enjoy late-night movies and television.
13 Select “Details” and press ENTER to verify the measurement results. 0 Subwoofers may measure a greater reported distance than the actual distance due to added electrical delay common in subwoofers. NOTE Do not change the speaker connection or subwoofer volume after Audyssey ® Setup.
Error messages An error message is displayed if Audyssey ® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Be sure to turn off the power before checking speaker connections.
Retrieving Audyssey ® Setup settings If you set “Restore...” to “Restore”, you can return to Audyssey ® Setup measurement result (value calculated at the start by MultEQ ® XT) even when you have changed each setting manually. . Audyssey Setup Channel Select Amp Assign Check Results Restore.
Manual Setup Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup. 0 If you change the speaker settings after performing Audyssey ® Setup, you will no longer be able to select Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® or Audyssey Dynamic Volume ® .
Speaker Config. Select whether or not speakers are present, playback capacity for low bass frequencies and speaker size. o Front Set the front speaker size. Large (Default) : Use a large speaker that can adequately play back very low bass frequencies.
o Surr. Back Set the presence, size and number of surround back speakers. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default) : Use a small speaker that has inadequate playback capacity for very low bass frequencies.
Distances Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker. o Unit Set the unit of distance. Meters (Default) Feet o Step Set the minimum variable width of the distance. 0.1 m (Default) / 0.
Levels Set the volume of the test tone to be the same at the listening position when it is output from each speaker. o Test Tone Start A test tone is output from the selected speaker. While listening to the test tone, adjust the volume output from the selected speaker.
Crossovers Set in accordance with the lower limit frequency of the base frequencies that can be played back through each speaker. See the speaker manual for information concerning speaker crossover frequency. o Speaker Selection Selects how to set the crossover frequency.
Bass Set subwoofer and LFE signal range playback. o Subwoofer Mode Select low range signals to be reproduced by subwoofer. LFE (Default) : The low range signal of the channel set to “Small” speaker size is added to the LFE signal output from the subwoofer.
Front Speaker Set the front speaker A/B to use for every sound mode. A (Default) : Front speaker A is used. B : Front speaker B is used. A+B : Both front speakers A and B are used. This can be set when “Assign Mode” is set to “Front B”. ( v p.
Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On”. (Use the default setting.) This allows this unit to use your home network (LAN).
Wi-Fi Setup Connect to a wireless LAN (Wi-Fi) router. The router can be connected in the following ways. Select the connection method to suit your home environment. o Scan Networks Select the network you wish to connect to from the list of possible networks shown on the TV screen.
o WPS Router Use a WPS-compatible router to connect. There are two ways to connect, using the push button method or the PIN code method. Select the connection method to match your router. n When connecting using the push button method 1. Select “Push Button” on the TV screen.
Settings Configure the proxy settings and IP address. 0 If you are using a broadband router (DHCP function), the information required for network connection such as the IP address will be automatically configured since the DHCP function is set to “On” in the default settings of this unit.
o Proxy Make this setting when connecting to the Internet via a proxy server. Make the proxy settings only when you connect to the Internet via a proxy server that is on your internal network or provided by your provider, etc. On(Address): Select when inputting by address.
Friendly Name The Friendly Name is the name of this unit displayed on the network. You can change the Friendly Name according to your preferences. o Friendly Name Selects Friendly Name from the list. When you select “Other”, you can change the Friendly Name according to your preferences.
Maintenance Mode Use when receiving maintenance from a Denon service engineer or custom installer. Ordinarily, this mode isn’t suitable for use by the end user, only by a trained service technician or custom installation professional. NOTE Only use this function if so instructed by a Denon serviceperson or installer.
General Make various other settings. Language Set the language for display the menu on the TV screen. English / Deutsch / Français / Italiano / Español / Nederlands / Svenska / Pусский / Polski (Default : English) “Language” can also be set up by the following operation.
o Power On Default Set the mode to ECO when the power is on. Last (Default) : The ECO Mode will be set to the previous setting before the power was switched off. On: When power is turned on, the mode will always be switched to the ECO Mode in “On”.
ZONE2 Setup Configure the settings for audio playback on ZONE2. Values set for “Volume Limit” and “Power On Volume” are displayed according to the setting specified for the volume “Scale”. ( v p. 149) o Bass Adjust bass. -10 dB – +10 dB (Default : 0 dB) o Treble Adjust treble.
o Volume Level Set the volume output level. Variable (Default) : Volume can be adjusted. 1 – 98 (–79.5 dB – 18.0 dB): Volume is fixed at the desired level. The volume cannot be adjusting using the remote control unit. o Volume Limit Make a setting for maximum volume.
Zone Rename Change the display title of each zone to one you prefer. MAIN ZONE / ZONE2 Set Defaults: The default setting is restored for the edited zone name. Up to 10 characters can be input. For character input, see “Using the keyboard screen” ( v p.
Front Display Makes settings related to the display on this unit. o Dimmer Adjust the display brightness of this unit. Bright (Default) : Normal display brightness. Dim: Reduced display brightness. Dark: Very low display brightness. Off: Turns the display off.
o Video Show the HDMI input/output signals and HDMI monitor information for MAIN ZONE. HDMI Signal Info. Resolution / Color Space / Pixel Depth HDMI Monitor Interface / Resolutions o ZONE Show information about current settings. MAIN ZONE: This item shows information about settings for MAIN ZONE.
Usage Data To help us improve our products and customer service, Denon collects anonymous information about how you use your AV receiver (such as frequently used input sources and sound modes and speaker settings). Denon will never provide any information we collect to third parties.
Firmware Checks for the latest firmware information about updates and upgrades, updates the firmware, and sets up the notification message display for updates and upgrades. o Update Updates the firmware of this unit. Check for Update: Checks to see if the firmware is the latest version.
o Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. Upgrade Package: Display the items to be upgraded. Upgrade Status: Display a list of the additional functions provided by the upgrade. Upgrade Start: Execute the upgrade process.
Setup Lock Protect settings from inadvertent changes. o Lock On: Turn protection on. Off (Default) : Turn protection off. When cancelling the setting, set “Lock” to “Off”. NOTE When “Lock” is set to “On”, no setting items are displayed except for “Setup Lock”.
Limiting the operating zone with the remote control . ZONE2 SETUP ZONE2 operations can be disabled using the remote control. 1 Press and hold ZONE2 and SETUP. The MAIN and ZONE2 buttons blink. o Canceling the settings 1 Press and hold ZONE2 and SETUP while configuring the setting.
o Contents Tips I want the volume not to become too loud by mistake 209 I want to keep the volume at the same level when I turn the power on 209 I want to have the subwoofer always output audio 209 I .
Tips I want the volume not to become too loud by mistake 0 Set the volume upper limit for “Volume Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. You can set this for each zone. ( v p.
I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new one. 0 Perform Audyssey ® Setup. This automatically makes the optimized speaker settings for the new listening environment.
Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the corresponding symptoms in this section.
o Power does not turn on / Power is turned off Symptom Cause / Solution Page Power does not turn on. 0 Check whether the power plug is correctly inserted into the power outlet. 56 Power automatically turns off. 0 The sleep timer is set. Turn on the power again.
o Operations cannot be performed through the remote control unit Symptom Cause / Solution Page Operations cannot be performed through the remote control unit. 0 Batteries are worn out. Replace with new batteries. 8 0 Operate the remote control unit within a distance of about 7 m from this unit and at an angle of within 30°.
o No sound comes out Symptom Cause / Solution Page No sound comes out of speakers. 0 Check the connections for all devices. 29 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected.
o Desired sound does not come out Symptom Cause / Solution Page The volume does not increase. 0 The maximum volume is set too low. Set the maximum volume using “Limit” on the menu. 149 0 Appropriate volume correction processing is performed according to the input audio format and settings, so the volume may not reach the upper limit.
Symptom Cause / Solution Page Dolby PL g mode or DTS Neo:X mode cannot be selected. 0 It cannot be selected when “Speaker Config.” - “Center” or “Surround” is set for “None”. 182 0 Dolby PL g or DTS Neo:X cannot be selected when using the headphones.
o Sound is interrupted or noise occurs Symptom Cause / Solution Page During playback from the Internet radio or USB memory device, sound is occasionally interrupted. 0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted.
o No video is shown on the TV Symptom Cause / Solution Page No picture appears. 0 Check the connections for all devices. 42 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected.
Symptom Cause / Solution Page When using HDMI ZONE2, the video output in MAIN ZONE is interrupted. 0 When ZONE2 is operated with the same input source selected for MAIN ZONE and ZONE2, video in MAIN ZONE may be interrupted.
o The menu screen is not displayed on the TV Symptom Cause / Solution Page The menu screen or status information screen is not displayed on the TV. 0 The menu screen is only displayed on this unit and a TV connected with an HDMI cable.
o iPod cannot be played back Symptom Cause / Solution Page iPod cannot be connected. 0 When using iPod by connecting it to the USB port, some iPod variations are not supported. 48 0 When iPod is connected by using a USB cable other than the genuine cable, iPod may not be recognized.
o USB memory devices cannot be played back Symptom Cause / Solution Page “No connection” is displayed. 0 This unit cannot recognize the USB memory device. Disconnect and reconnect the USB memory device. 48 0 Mass storage class compatible USB memory devices are supported.
o File names on the iPod/USB memory device are not displayed properly Symptom Cause / Solution Page The file names are not displayed properly (“...”, etc.). 0 Characters that cannot be displayed have been used. On this unit, characters that cannot be displayed are replaced with a “.
o The Internet radio cannot be played back Symptom Cause / Solution Page A list of broadcasting stations is not displayed. 0 The LAN cable is not properly connected, or the network is disconnected. Check the connection status. 52 0 Perform the network diagnostic mode.
o Music files on PC or NAS cannot be played back Symptom Cause / Solution Page Files stored on a computer cannot be played. 0 Files are stored in a non-compatible format. Record in a compatible format. 237 0 Files that are copyright protected cannot be played on this unit.
o The HDMI control function does not work Symptom Cause / Solution Page The HDMI control function does not work. 0 Check that “HDMI Control” in the menu is set to “On”. 159 0 You cannot operate devices that are not compatible with the HDMI control function.
o Cannot connect to a wireless LAN network Symptom Cause / Solution Page Cannot connect to the network. 0 The network name (SSID), password and encryption setting have not been set up correctly. Configure the network settings according to the setting details of this unit.
o When using HDMI ZONE2, the devices does not function properly Symptom Cause / Solution Page When using MAIN ZONE, video output is interrupted in HDMI ZONE2. 0 With the same input source selected for MAIN ZONE and ZONE2, when you operate MAIN ZONE, video may be interrupted in HDMI ZONE2.
Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed. Various settings are reset to the factory default values. Make settings again. . X TUNER PRESET CH + TUNER PRESET CH – 1 Turn off the power using X .
About HDMI HDMI is an abbreviation of High-Definition Multimedia Interface, which is an AV digital interface that can be connected to a TV or amplifier.
0 Auto Lip Sync This function can automatically correct delay between the audio and video. Use a TV that is compatible with the Auto Lip Sync function. 0 HDMI Pass Through Even when the power to this unit is set to standby, signals input from the HDMI input connector are output to a TV or other device that is connected to the HDMI output connector.
o Supported audio formats 2-channel Linear PCM 2-channel, 32 kHz – 192 kHz, 16/20/24 bit Multi-channel Linear PCM 7.1-channel, 32 kHz – 192 kHz, 16/20/24 bit Bitstream Dolby Digital / DTS / Dolby TrueHD / Dolby Digital Plus / DTS-HD Master Audio / DTS-HD High Resolution Audio / DTS Express DSD 2-channel – 5.
Video conversion function This unit automatically converts the input video signals as shown in the diagram before outputting them to the TV. The main zone video conversion function is compatible with the following formats: NTSC, PAL, SECAM, NTSC4.43, PAL-N, PAL-M and PAL-60.
This unit can convert the input video signals to the resolution that is set for “Resolution” in the menu before outputting them to the TV. ( v p. 163) Output signal Input signal HDMI 480i/576i 480.
Playing back a USB memory devices 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver.
o Maximum number of playable files and folder The limits on the number of folders and files that can be displayed by this unit are as follows. Media Item USB memory device Memory capacity FAT16 : 2 GB.
Playing back a file saved on a PC or NAS 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver.
Playing back Internet Radio o Playable broadcast station specifications Sampling frequency Bit rate Extension WMA 32/44.1/48 kHz 48 – 192 kbps .wma MP3 32/44.
Sound modes and channel output S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.” ( v p. 182). Sound mode ( v p.
Sound modes and surround parameters Sound mode ( v p. 110) Surround Parameter ( v p. 144) Dialog Level Adjust ( v p. 143) Subwoofer Level Adjust ( v p. 143) Cinema EQ ( v p. 144) Loudness Management z 1 ( v p. 144) Dynamic Compression z 2 ( v p. 145) Low Frequency Effects z 3 ( v p.
Sound mode ( v p. 110) Surround Parameter ( v p. 144) Tone z 9 ( v p. 106) Audyssey ( v p. 150) Restorer z 12 ( v p. 148) Pro Logic g / g x Music mode only Neo:X mode only Panorama ( v p. 145) Dimension ( v p. 146) Center Width ( v p. 146) Center Gain ( v p.
z 1 This item can be selected when a Dolby TrueHD signal is played. z 2 This item can be selected when Dolby TrueHD, Dolby Digital or DTS signal is played. z 3 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played. z 4 This setting is available when the set sound mode name contains “+PL g z”.
Types of input signals, and corresponding sound modes F This indicates the default sound mode. S This indicates the selectable sound mode. Sound mode ( v p. 110) NOTE 2-channel signal Multi-channel signal Analog / PCM Dolby Digital (+/HD)/ DTS (-HD) DSD (Super Audio CD) PCM Multi DTS-HD DTS Express DTS ES Dscrt6.
Sound mode ( v p. 110) NOTE 2-channel signal Multi-channel signal Analog / PCM Dolby Digital (+/HD)/ DTS (-HD) DSD (Super Audio CD) PCM Multi DTS-HD DTS Express DTS ES Dscrt 6.
z 1 This item can be selected when surround back speakers are used. z 2 The “Cinema” mode or “Music” mode can be selected. When using a single surround back speaker, the “Music” mode is used. z 3 This item can be selected when front height speakers are used.
Explanation of terms o Audyssey Audyssey Dynamic EQ ® Dynamic EQ solves the problem of deteriorating sound quality as volume is decreased by taking into account human perception and room acoustics. Audyssey Dynamic EQ ® works in tandem with Audyssey MultEQ ® XT to provide well-balanced sound for every listener at any volume level.
o Dolby Dolby Digital Dolby Digital is a multi-channel digital signal format developed by Dolby Laboratories. A total of 5.1-channels are played: 3 front channels (“FL”, “FR” and “C”), 2 surround channels (“SL” and “SR”) and the “LFE” channel for low frequency effects.
Dolby Pro Logic g z Dolby Pro Logic g z introduces a new dimension to Home Entertainment through the addition of a pair of front height channels. This supports various sources such as 2-channel sources and 7.
DTS-ES™ Discrete 6.1 DTS-ES™ Discrete 6.1 is a 6.1-channel discrete digital audio format adding a surround back (SB) channel to the DTS digital surround sound. Decoding of conventional 5.1-channel audio signals is also possible according to the decoder.
o Audio ALAC (Apple Lossless Audio Codec) This is a codec for lossless audio compression method developed by Apple Inc. This codec can be played back on iTunes, iPod or iPhone. Data compressed to approximately 60 – 70 % can be decompressed to exactly the same original data.
MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4 These are the names for digital compression format standards used for the encoding of video and audio. Video standards include “MPEG-1 Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”.
o Video ISF ISF (Imaging Science Foundation) is an organization that certifies video technicians who are then qualified to carry out calibration and adjustment to match the installation conditions. It also sets quality standards for the optimization of device video performance.
TKIP (Temporal Key Integrity Protocol) This is a network key used for WPA. The encryption algorithm is RC4, the same as for WEP, but the security level is increased by changing the network key used for encryption for each packet. vTuner This is a free online content server for Internet Radio.
Network Names (SSID: Security Set Identifier) When forming wireless LAN networks, groups are formed to prevent interference, data theft, etc. These groups are based on “SSID (network names)”. For enhanced security, a WEP key is set so that communication is unavailable unless both the “SSID” and the WEP key match.
o Others App Store App Store is a site that sells application software for such devices as the iPhone or iPod Touch, and is operated by Apple Inc. HDCP When transmitting digital signals between devices, this copyright protection technology encrypts the signals to prevent content from being copied without authorization.
Trademark information . “Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards.
. Manufactured under a license from U.S. Patent No’s: 5,956,674; 5,974,380; 5,978,762; 6,487,535; 6,226,616; 7,212,872; 7,272,567; 7,668,723; 7,392,195; 7,930,184; 7,333,929; 7,548,853; 7,003,467; 7,283,634; & other U.S. and worldwide patents issued & pending.
Specifications o Audio section 0 Power amplifier Rated output: Front: 105 W + 105 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 135 W + 135 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 105 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 135 W (6 Ω/ohms, 1 kHz with 0.
0 Digital D/A output: Rated output — 2 V (at 0 dB playback) Total harmonic distortion — 0.008 % (1 kHz, at 0 dB) S/N ratio — 102 dB Dynamic range — 100 dB Digital input: Format — Digital audio interface o Tuner section [FM] [AM] (Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W) Reception frequency range: 87.
o Wireless LAN section Network type (wireless LAN standard): Conforming to Wi-Fi ® z 1 Security: WEP 64 bit, WEP 128 bit WPA/WPA2-PSK (AES) WPA/WPA2-PSK (TKIP) Radio frequency: 2.4 GHz No. of channels: 1 – 13 ch z 1 The Wi-Fi ® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.
o Bluetooth section Communications system: Bluetooth Version 2.1 + EDR (Enhanced Data Rate) Transmission power: Maximum 2.5 mW (Class 2) Maximum communication range: Approx.
o Dimensions (Unit : mm) . 434 237 55 47 15 152 167 237 339 388 19 31 340 60 47 47 o Weight: 11.1kg Contents Connections Playback Settings Tips Appendix 262 Front panel Display Rear panel Remote Index.
Index v Numerics 3D ................................................................ 230 4K ................................................................ 230 5.1-channel .................................. 28, 33, 37, 38 7.1-channel ................
v I Input Assign ................................................. 167 Input signal ................................................... 243 Input source settings ............................ 138, 167 Inputting characters ..............................
v T Text Search .................................................. 102 Tips .............................................................. 209 Tone Control ................................................ 106 Troubleshooting ..........................
License This section describes software license used for this unit. To maintain the correct content, the original (English) is used. o Boost http://www.
Definitions. “Articles” means, collectively, all articles written by Author which describes how the Source Code and Executable Files for the Work may be used by a user. “Author” means the individual or entity that offers the Work under the terms of this License.
You may distribute the Executable Files and Source Code only under the terms of this License, and You must include a copy of, or the Uniform Resource Identifier for, this License with every copy of th.
No term or provision of this License shall be deemed waived and no breach consented to unless such waiver or consent shall be in writing and signed by the party to be charged with such waiver or consent. This License constitutes the entire agreement between the parties with respect to the Work licensed herein.
0 Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. 0 Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
o License information for the software used in the unit About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Denon AVRX3100WBKE2 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Denon AVRX3100WBKE2 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Denon AVRX3100WBKE2 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Denon AVRX3100WBKE2 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Denon AVRX3100WBKE2, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Denon AVRX3100WBKE2.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Denon AVRX3100WBKE2. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Denon AVRX3100WBKE2 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
