Manuale d’uso / di manutenzione del prodotto 5000 del fabbricante Dell
Vai alla pagina of 29
Removing and Replacing Parts: Dell™ Inspiron™ 5000 Series NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty.
Precautionary Measures NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty.
Customer-Accessible Components NOTICE: The steps in this section may be performed by customers. Disconnect the AC adapter cable from the computer. 1. If the computer is connected to a port replicator, pull both release handles on the sides of the replicator to undock the computer.
NOTICE: Use the PC Card configuration utility on the taskbar to select and stop a card before removing it from the computer. If you do not remove the card in the configuration utility, you could lose data from open application programs. Remove any PC Cards: Press the eject button.
NOTICE: When the hard-disk drive is not in the computer, store it in a hard-disk drive case or protective wrapping to protect it from exposure to static electricity. NOTICE: Handle the hard-disk drive gently; do not bump or drop the drive. Rough handling of the drive could induce failure or loss of data.
Remove the device from the media bay: Close the display and turn the computer upside-down. . Slide and hold the latch release away from the media bay device. b. Pull the device out of the media bay. c. 8. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
Screw Counts and Locations NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. You may find it helpful to print the following table to use for keeping the screws organized as you disassemble the computer.
LED/Inverter Board 2 ZIF Connectors NOTICE: ZIF connectors are fragile. To avoid breaking the connectors, touch them carefully. Do not apply too much pressure to the movable part of the connector when opening or closing it. Some of the interface connectors are zero insertion force (ZIF) connectors.
To reinsert the modem when you reassemble the computer, perform the following steps: Attach the modem cable. 1. Insert the modem into the socket, and rock it up and down until it is completely in place. 2. NOTICE: Fold the modem cable out of the way of the modem door to make sure you do not cut it when you close the modem door.
Open the display, and lift off the hinge cover by rotating it toward you. 2. To replace the hinge cover, perform the following steps: Insert the hinge cover at a 45° angle. 1. Press the hinge cover down above the <F4>, <F5>, and <Print Screen> keys.
Slide the keyboard out from under the palmrest. 2. Detach the cable from the ZIF connector . 3. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
Thermal Shield Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. Remove the thermal shield screws. Inspiron 5000 computers have 4 screws (first photo), and Inspiron 5000e computers have 5 screws (second photo).
Remove the diskette-drive cable clip (held in place by the leftmost thermal shield screw). 2. Lift off the thermal shield. 3. NOTICE: Be sure to replace the diskette-drive cable clip (held in place by the leftmost thermal shield screw) when you replace the thermal shield.
Lift out the module. 2. When you replace the processor, be sure to attach it to the connector. 3. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
When you replace the processor during reassembly, be sure to attach it to the connector. LCD Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty.
Diskette Drive Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. Detach the data cable. 1. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
Remove the drive retaining screws from the bottom of the computer. 2. Remove the drive from the chassis. 3. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
Palmrest Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. Remove the three screws from the top of the computer.
Remove the two screws (outer corners) from the bottom of the computer. If you plan to remove the system board, also remove the three screws adjacent to the memory module slots and the modem. 2. Remove the three screws from the hard-disk drive compartment.
Remove the four screws from the battery bay. 4. Remove the five screws from the media bay. 5. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
Speaker and Volume Board Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. Remove the nine screws. 1. Disconnect the speaker cable.
Support Rail Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. Remove the four screws. 1. Disconnect the fan cable.
Remove the seven screws from the back of the computer. 3. Infrared Board Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty.
System Board Removal NOTICE: Only a certified service technician should perform repairs on your computer. Damage or inoperability due to servicing not authorized by Dell is not covered by your warranty. Remove the two screws. 1. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
Remove the eight I/O port nuts. 2. Flex the base plastics to separate the system board from the audio connector posts on the left side of the computer. 3. Lift the system board up and out from the base plastics. 4. Removing and Replacing Parts: Dell Inspiron 5000 Series file:///c|/docs/blanco E-doc/removing.
14.1-Inch XGA Display Disassembly Bezel Removal Remove the two screw covers from the bottom corners of the LCD bezel. 1. Remove the two bumpers from the top corners of the LCD bezel. 2. Remove the four screws from the corners of the LCD bezel. 3. Ease your fingers under the bezel on the bottom of the bezel.
Once you have disengaged all of the retaining tabs, lift the bezel from the LCD panel. 5. Panel Removal NOTICE: It is not necessary to remove the display locking tabs when removing the panel. Remove the two screws from each side of the panel. 1. Disconnect the cold cathode fluorescent lamp (CCFL) cable from the bottom of the panel.
Bezel Removal Remove the two screw covers from the bottom corners of the LCD bezel. 1. Remove the two screws from the bottom corners of the LCD panel. 2. Ease your fingers under the bezel at the top of the panel. Work your way around the bezel and disengage all the retaining tabs.
Disconnect the CCFL cable from the bottom of the panel. 3. Disconnect the flex cable from the LCD panel. 4. Lift the LCD panel from the back cover. 5. LED/Inverter Board Removal Remove the two screws from the LED/inverter board. 1. Disconnect the flex cable from the ZIF connector on the bottom side of the LED/inverter board.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Dell 5000 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Dell 5000 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Dell 5000 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Dell 5000 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Dell 5000, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Dell 5000.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Dell 5000. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Dell 5000 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
