Manuale d’uso / di manutenzione del prodotto DJ-4710, DJ-4720, DJ-4710E, DJ-4720E del fabbricante Daewoo
Vai alla pagina of 48
INSTRUCTION MANUAL REAR PROJECTION TV DJ - 4710 / 5510 DJ - 4720 / 5520 DJ - 4710E / 5510E DJ - 4720E / 5520E P/N:48586113E203-R0.
PROJECTION TV -1- CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
IMPORT ANT SAFEGUARDS -2- 1. Read, Retain and Follow All Instructions Read all safety and operating instructions before operating the TV. Retain the safety and operating instructions for future reference. Follow all operating and use instructions. 2. Heed W arnings Adhere to all warnings on the appliance and in the operating instructions.
12. Power Lines An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
W arning -4- This section must be read carefully and followed by the user prior to the operation of the product. The manual states important instructions for the user's own safety, and the proper operation of the product. In case of an accident, please unplug the unit from the outlet immediately .
Caution -5- Please keep the user's manual in a safe place for future reference. This section must be read carefully and followed by the user when installing and transporting the product. Do not put volatile substance-such as benzene, naphtha- near the product since it may cause a change in the product's colour.
This product has advantages as follows. -6- Make Sure of Auxiliary Parts. IN S T R U C T IO N M A N U A L REAR PROJECTION TV D J - 4 7 1 0 / 5 5 1 0 D J - 4 7 2 0 / 5 5 2 0 D J - 4 7 1 0 E / 5 5 1 0 E.
T able of Contents -7- Installation and Maintenance Antenna Connection 8 Video Connection 11 Camcorder & Video Game Connection 12 DVD Connection 13 Cable TV Broadcasting Connection 14 Name of Each.
Antenna Connection -8- 1. Connect the feeder cable of the antenna to the combining adapter . 2. Connect the combining adapter to the antenna input at the back of the TV set. COMPONENT AUDIO L R Cr Cb Y ANT AV3 AV2 AV1 WHEN THE IMAGE IS NOT CLEAR Unclear screen image and bad reception may be a cause of wrong antenna connection.
-9- Such community TV Antenna installation may be found in most of co-op apartments. When a coaxial cable is used Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right.
COMPONENT AUDIO L R Cr Cb Y AV3 AV2 AV1 -10- Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses Single Antenna Connection.
V ideo Connection -11- Y ou may connect S-V ideo input to enjoy clearer and brighter picture images. Y ou can make the connection with the A V4 input. Connection is not necessary in Mono mode. Connecting with SCART VIDEO 1. Prepare the scart lead for picture / sound.
Camcorder & V ideo Game Connection -12- -Use the input jack provided at the side panel of the TV set. -Use the same connection method for Video Game.
DVD Connection (Component V ideo Method) -13- -480i input signal is possible for DVD input. -DVD screen output is composed of three separate primary colour jack(Y/Cb/Cr), resulting in a higher image quality. -Y/Cb/Cr, may also be noted as Y/PB/PR or Y/Pb/Pr in different DVD players.
Cable TV Broadcasting Connection -14- Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver. You may make the connection to any of the Component input and SCART input AV1, AV2 & AV3.
-15- Watching cable television is only possible after you have subscribed to the local broadcasting company and installed a cable receiver. Antenna Input Connection Cable TV Broadcasting Station.
Name of Each Part -16- Buttons on the TV set have the same function as those of the remote controller . Front Panel Front Panel Button If you turn the TV set off by pressing the ON/OFF button at this panel, it is as unplugging the power cord from the outlet since this will prevent all operation of both the TV set and the remote controller.
-17- COMPONENT AUDIO L R Cr Cb Y AV3 AV2 AV1 Side Panel It is convenient to use the input jacks provided at the side panel when connecting to the camcorder or Video Game.
-18- VIRTUAL DOLBY PICTURE ASPECT DISPLA Y MODE DYNAM IC BASS ZOOM OK STILL SOUND MODE This remote controller is universal; thus, it may be convertible for TV, Video, CTV, etc. Power Recall Program number (0-9) Use to select channel directly 0~9 Sleep This feature is used to set up the time of automatic turn off.
-19- When the TV screen image is unclear Do not drop or spill liquid on it. Do not expose to heat, dust, or humidity BATTERY INSTALLATION Push to open the cover of the remote controller Set the batteries in the battery cell after checking the polarity, and then replace the cover.
Method T o Use Basic Menu -20- - The basic menu appears on the screen if you press the menu button of the remote control. - There are 5 items Picture, Screen, Sound, Function, and Install in the basic menu. - Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed upward.
T o W atch TV -21- - Buttons with same name in the main body performs same function. On/Off, Number , Mute, Recall, ◀/▶/▼/▲ VIRTUAL DOLBY PICTURE ASPECT DISPLA Y MODE DYNAMIC BASS ZO O M OK STILL SOUND MODE When pressing the Program button • Select two digits if using the number button for channel selection.
-22- Press the “ON/OFF” button. • Press the “ ON/OFF ” button of the main body. • The main power lamp turns on in red colour. • Press the “ Power ” button of the main body or the “ Power ” button of the remote control. • The main power lamp turns on in “ green ” colour and the TV turns on.
Setting Up TV Stations -23- - All stations that can be received are stored by this method. It is recommended that you use Auto tuning during installation of this set.
-24- Press the OK button. • Auto tuning will begin, your stations will be located and stored. OK Start Country Set MENU Exit Auto Tuning Country Set Please wait ! PR 19 Pal / Secam Norway DISPLAY MODE D Y N A M IC B A S S ZO O M O K Please wait until the Edit menu appears.
-25- The Edit menu shows you information as follows: - Program position assignment : Program number and Station name, Real channel number. - Picture information : PAL, SECAM, SECAM-L - Sound informati.
-26- VIRTUAL DOLBY PICTURE ASPECT D IS P L A Y M O D E D Y N A M IC B A S S ZOOM OK STILL SOUND MODE Manual tuning Press the Number buttons(0~9) or the “ ▼ PR ▲ ” button to select a program number you want. DISPLAY MODE D Y N A M IC B A S S ZO O M O K Locate the selection bar on the Manual tuning at the Install menu.
-27- Press the “ ◀ ◀ VOL ▶ ▶ ” buttons. • A tuning screen will appear and cursor will move from left to right / from right to left. If you want to stop tuning press the Menu button. After searching a station, you must press the OK button to store the Program.
-28- - If you are unable to get a good picture or sound because of a poor broadcasting signal, it is possible to adjust the Fine tuning. Fine tuning VIRTUAL DOLBY PICTURE ASPECT D IS P L A Y M O D E D.
Selection of Input Signal -29- - See 11p for connection method of TV and “ Video ” . When watching video, Camcorder , DVD, Cable TV VIRTUAL DOLBY PICTURE ASPECT D IS P L A Y M O D E D Y N A M IC B A S S ZOOM OK STILL SOUND MODE Press the “ (A V)” button.
Screen Adjustment -30- - The user may select various screens designed for a good picture without adjusting the brightness, contrast or colour individually. When setting up various screen modes VIRTUAL DOLBY PICTURE ASPECT D IS P L A Y M O D E D Y N A M IC B A S S ZOOM OK STILL SOUND MODE Press the “Picture” button.
-31- - You can enjoy various screens by adjusting Brightness, Contrast, Colour, Sharpness, etc to the user ’ s taste. When adjusting the screen to taste VIRTUAL DOLBY PICTURE ASPECT D IS P L A Y M O D E D Y N A M IC B A S S ZOOM OK STILL SOUND MODE Select “Picture” by pressing the “Menu” button.
-32- - Randomly change the size of the screen. Pleasure for enjoying the TV increases further. - The AUTO screen operates when power is turned on firstly. Adjustment of Screen Size VIRTUAL DOLBY PICTURE ASPECT D IS P L A Y M O D E D Y N A M IC B A S S ZOOM OK STILL SOUND MODE Press the “Aspect” and “Zoom” button.
Adjustment of Colour Match -33- - This function enables you to adjust the colour convergence of the screen during receiving the signals. When the set is first installed or it is relocated, the picture may be unstable with three colour(Red, Green, Blue).
-34- Convergence VIRTUAL DOLBY PICTURE ASPECT D IS P L A Y M O D E D Y N A M IC B A S S ZOOM OK STILL SOUND MODE Press the “ ◀ ◀ VOL ▶ ▶ , ▼ ▼ PR ▲ ▲ ” button to superimpose the red display “+” with the Green one.
-35- - This is function to prevent the use of the TV set without the remote control. Setup of Child Lock VIRTUAL DOLBY PICTURE ASPECT DISPLAY MODE DYNAMIC BASS ZOOM OK STILL SOUND MODE Still - This is the function to temporarily stop the main screen or the auxiliary screen currently watched.
Sound Adjust -36- Press the “Sound Mode” button. • The sound status changes while the following screens display in turn whenever pressing the Sound Mode button.
-37- VIRTUAL DOLBY PICTURE ASPECT D IS P L A Y M O D E D Y N A M IC B A S S ZOOM OK STILL SOUND MODE When adjusting sound to taste - The user can enjoy various the sounds by adjusting Sound Mode, Equa.
-38- Select Virtual Dolby Mode • You can perceive, orientation and a cubic effect through the left/right speaker by developing the existing surround system function. • If you select “ Virtual Dolby ” or, Panorama and 3D Panorama which is repeated whenever you press the “ VOL ▶ ” button.
-39- Multi-Sound and Stereo VIRTUAL DOLBY PICTURE ASPECT D I S P L A Y M O D E D Y N A M IC B A S S ZOOM OK STILL SOUND MODE Press the “ ” button. • The status changes whilst the following screens sequentially appear when pressing the button.
Adjustment of T ime -40- Select “Function” by pressing the “Menu” button. • The menu screen appears as follows. DISPLAY MODE D Y N A M IC B A S S ZO O M O K Select “Timer” • A screen appears as in the right if you select Timer • You can setup “ current time ” , “ wake up time ” and “ off time ” etc.
-41- VIRTUAL DOLBY PICTURE ASPECT D IS P L A Y M O D E D Y N A M IC B A S S ZOOM OK STILL SOUND MODE Adjustment of T ime Setting the Time • Place the cursor to Hour / Minute with “ ◀ VOL ▶ ” buttons. • Set the Hour / Minute with the “ ▼ PR ▲ ” buttons.
-42- The red lamp turns on whether setting up either Off-time/ On-time. This function is very convenient since the TV automatically turns off at the fixed time if reserving the Off-time for sleeping time or at desired time. If adjusted once, this function operates everyday unless you cancel the Off-time setup or switch off the main power button.
-43- - This function is designed to turn off the TV after a fixed amount of time (10min~120min) has passed from the current time. - Adjust sleep time with sleep button on the remote control.
Selection of Language -44- Selection of Language This function enables you to select the language of the on screen menus displayed on the TV screen. VIRTUAL DOLBY PICTURE ASPECT D IS P L A Y M O D E D.
T eletext -45- Switching Teletext ON/OFF Press the Text button ( ) The index page or the page viewed last will appear. Press the Text button again to return to the TV mode. Colour buttons in TOP/FLOF Teletext A red, green, yellow and cyan field is shown at the bottom of the screen.
T roubleshooting -46- Symptoms and Solutions Please check the following list prior to calling Daewoo Electronics Service Centre for assistance Is the TV power cord plugged into the outlet correctly? Please check the power cord and connect it properly to the outlet.
Standard of Product -47- Model DJ - 4710/5510, DJ - 4720/5520, DJ - 4710E/5510E, DJ - 4720E/5520E Band I : CH02 ~ CH04 VHF Band II : CH05 ~ CH12 Receipt Channel Cable Band : S1 ’ ~ S3 ’ , S1 ~ S20.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Daewoo DJ-4710, DJ-4720, DJ-4710E, DJ-4720E è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Daewoo DJ-4710, DJ-4720, DJ-4710E, DJ-4720E - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Daewoo DJ-4710, DJ-4720, DJ-4710E, DJ-4720E imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Daewoo DJ-4710, DJ-4720, DJ-4710E, DJ-4720E ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Daewoo DJ-4710, DJ-4720, DJ-4710E, DJ-4720E, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Daewoo DJ-4710, DJ-4720, DJ-4710E, DJ-4720E.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Daewoo DJ-4710, DJ-4720, DJ-4710E, DJ-4720E. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Daewoo DJ-4710, DJ-4720, DJ-4710E, DJ-4720E insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
