Manuale d’uso / di manutenzione del prodotto TM DES-6500 del fabbricante D-Link
Vai alla pagina of 334
Product Model : TM DES-6500 Modular Layer 3 Chassis Ethernet Switch Release 3 CLI Manual.
Table of Contents Introductio n ............................................................................................................................................ 1 Using the Con sole CLI .....................................................
DVMRP Command s ................................................................................................................. ............ 290 PIM Comma nds ..........................................................................................
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 1 I NTRODUCTION The xStack DES-6500 layer 3 modular chassis Ethernet switch is a m ember of the D-Link xStack fam ily.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual There is no initial username or passwo rd. Just press the Enter key twice to display the CLI input cursor − DE S-6500:4# .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Figure 1-3. Assigning an IP Address In the above example, t he Switch was assigned an IP address of 10.53.13.144 with a subnet m ask of 255.0.0.0. The system message Success indicates t hat the command was execut ed successfully.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 2 U SING THE C ONSOLE CLI The XStack DES-6500 supports a console management interface that allows the user to connect to the Switch’s m anagement agent via a serial port and a term inal or a comput er running a terminal em ulation program.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Figure 2-1. Initial Console Screen Comm ands are entered at the comm and prompts, DE S-6500:4# . There are a number of helpful features included in the CLI. Entering the ? command will display a list of all of the top-level co mmand s.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Figure 2-3. Example Command Parameter Help In this case, the comma nd config account was entered with the parameter <username> . The CLI will then prompt to enter the <username> with th e message, Next possible completions: .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual If a comma nd is entered that is unrecognized by the CL I, the top-level commands will be displayed under the Available commands: prompt. Figure 2-5. The Available Commands Prompt The top-level com mands consist of com mands such as show or config .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 3 C OMM AND S YNT AX The following sy mbols are used to describe how com mand entries are m ade and values and arguments are specified in this manual. The online help contained in the CLI and available through the console interface uses the sam e syntax.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual {braces} Purpose Encloses an optional value or set of optional arguments. Syntax reset {[config | system]} Description In the above syntax exampl e, you have the option to specify config or sy stem .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 4 B ASIC S WITCH C OMM ANDS The basic switch comma nds in the Command Line Interface (CLI) are listed (along with the appropriate param eters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create account Purpose Used to create user accounts. Syntax create [admin | user] <username 15> Description The create account command is used to create user accounts that consist of a username of 1 to 15 characters and a password of 0 to 15 characters.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config account dlink Command: config account dlink Enter a old passw ord:**** Enter a case-sensitive new passw ord:**** Enter the new passw ord again for confirmation:**** Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#delete account System Command: delete account System Are you sure to delete the last administrator account?(y /n)y Success. DES-6500:4# Example usage: To delete the user account “System 2”: DES-6500:4#delete account System2 Command: delete account System2 Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Command: show config config_in_NVRAM #------------------------------------------------------------------------------------------------------ # DES-6500 Configuration # # Firmw are: Build 3.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show switch Purpose Used to display information about the Switch. Syntax show sw itch Description This command displays information about the Switch. Parameters None. Restrictions None.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show device_status Purpose Used to display the current st atus of the hardware of the Switch. Syntax show device_status Description This command displays the curr ent status of the Switch’s physical elements.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config serial_port Purpose Used to configure the serial port. Syntax config serial_port {auto_logout [never | 2_minutes | 5_minutes | 10_minutes | 15_minutes]} Description This command is used to configure the serial port’s baud rate and auto logout settings.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#enable clipaging Command: enable clipaging Success. DES-6500:4# disable clipaging Purpose Used to disable the pausing of the console screen scrolling at the end of each page when the show command displays more than one screen of information.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual disable telnet Purpose Used to disable the Telnet protocol on the Switch. Syntax disable telnet Description This command is used to disable the Telnet protocol on the Switch. Parameters None.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual disable web Purpose Used to disable the HTTP-based management software on the Switch. Syntax disable w eb Description This command disables the Web-based management software on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual reboot Purpose Used to restart the Switch. Syntax reboot Description This command is used to restart the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual login Purpose Used to log in a user to the Switch’s console. Syntax login Description This command is used to initiate the login procedure. The user will be prompted for his Username and Password.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config command_prompt Switch. default – Entering this parameter will return the command prompt to its original factory default setting.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config greeting_message Command: config greeting_message Greeting Messages Editor =============================================================================== DES-6500 Chassis Ethernet Sw itch Command Line Interface Firmw are: Build 3.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 5 S WITCH P OR T C OMM ANDS The switch port commands in the Com mand Line Interface (CLI) ar e listed (along with the appropriate parameters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config ports from the maste r . If one connection is set for 1000 master , the other side of the connection must be set for 1000 slave . Any other configuration will result in a link down status for both ports.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show ports Command: show ports Port Port Settings Connection Address State Sp eed/Duplex/Flow Ctrl Speed/Duplex/Flow Ctrl .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 6 P ORT S ECURITY C OM MANDS The port security comma nds in the Command Line Interface (CLI) are listed (along with the appropriate param eters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To configur e the port security: DES-6500:4#config port_security ports 5:1-5:5 admin_state enabled max_learning_addr 5.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual delete port_security_entry _vlan_name Purpose Used to delete an entry from the Switch’s port secu rity settings.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 7 N ETWORK M ANAGEMENT (SNMP) C OM MANDS The network managem ent commands in the Com mand Line Interface (CLI) are listed (along with the appropriate param eters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Command Parameters <view_name 32> | notify_view <view_name 32>} delete snmp group <groupname 32> show snmp groups c.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create snmp user Encryption − Scrambles the contents of messages to prevent it from being viewed by an unauthorized source. Parameters <username 32> − An alphanumeric name of up to 32 characters that will identify the new SNMP user.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create snmp user the agent. • <priv_key 32-32> - Enter an alphanumeric key string of exactly 32 characters, in hex form, that will be used to encrypt the cont ents of messages the host sends to the agent.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show snmp user Purpose Used to display information about each SNMP username in the SNMP group username table. Syntax show snmp user Description The show snmp user command displays information about each SNMP username in the SNMP group username table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#create snmp view dlinkview 1.3.6 view _type included Command: create snmp view dlinkview 1.3.6 view _type included Success. DES-6500:4# delete snmp view Purpose Used to remove an SNMP vi ew entry previously created on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Command: show snmp view Vacm View Table Settings View Name Subtree View Type -------------------- ------------------------- ---------- ReadView 1 Included WriteView 1 Included NotifyView 1.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To create the SNMP community string “dlink:” DES-6500:4#create snmp community dlink v iew ReadView read_w rite Command: create snmp community dlink v iew ReadView read_w rite Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To display the currently entered SNMP community strings: DES-6500:4#show snmp community Command: show snmp community S.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To display the current nam e of the SNMP engine on the Switc h: DES-6500:4#show snmp engineID Command: show snmp engineID SNMP Engine ID : 0035636666 DES-6500:4# create snmp group Purpose Used to create a new SNMP gr oup, or a table that maps SNMP users to SNMP views.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create snmp group be encrypted. read_view – Specifies that the SNMP group being created can request SNMP messages. write_view – Specifies that the SNMP group being created has write privileges.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show snmp groups Purpose Used to display the group- names of SNMP groups currently configured on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual ReadView Name : restricted WriteView Name : Notify View Name : restricted Security Model : SNMPv 3 Security Lev el : NoAuthNoPriv Gro.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create snmp host of Management Information (SMI) and adds some security features. v3 – Specifies that the SNMP ve rsion 3 will be used. SNMP v3 provides secure access to devices through a combination of authentication and encrypting packe ts over the network.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To delete an SNMP host entry: DES-6500:4#delete snmp host 10.48.74.100 public Command: delete snmp host 10.48.74.100 public Success. DES-6500:4# show snmp host Purpose Used to display the recipi ent of SNMP traps generated by the Switch’s SNMP agent.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create trusted_host Parameters <ipaddr> − The IP address of the trusted host. Restrictions Only administrator-lev el users can issue this command. Example usage: To create the trusted host: DES-6500:4#create trusted_host 10.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example Usage: To delete a trusted host with an IP address 10.48.74.121: DES-6500:4#delete trusted_host 10.48.74.121 Command: delete trusted_host 10.48.74.121 Success. DES-6500:4# enable snmp traps Purpose Used to enable SNMP trap support.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show snmp traps Purpose Used to show SNMP trap support on the Switch . Syntax show snmp traps Description This command is used to view the SNMP trap support status currently configured on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example Usage: To disable the SNMP authenticat ion trap support: DES-6500:4#disable snmp authenticate_traps Command: disable snmp authenticate_traps Success. DES-6500:4# config snmp system_contact Purpose Used to enter the name of a c ontact person who is responsible for the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To configure the Switch locati on for “ HQ 5F ”: DES-6500:4#config snmp system_location HQ 5F Command: config snmp system_location HQ 5F Success. DES-6500:4# config snmp system_name Purpose Used to configure the name for the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#enable rmon Command: enable rmon Success. DES-6500:4# disable rmon Purpose Used to disable RMON on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 8 S WITCH U TILITY C OMM ANDS The switch utility commands in the Com mand Li ne Interface (CLI) are listed (along with the appropriate param eters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual download increment − Allows the download of a partial switch configuration file. This allows a file to be downloaded that will change only the Switch parameter s explicitly stated in the configuration file.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#upload cfg_toTFTP 10.48.74.121 c:cfglog.txt Command: upload cfg_to TFTP 10.48.74.121 c:cfglog.txt Connecting to server................... Done. Upload confi guration........
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual traceroute Parameters <ipaddr> - Specifies the IP address of the host. ttl <value 1-60> - The time to live value of the trace route request. This is the maximum number of routers the traceroute command will cross while seeking the network path between two devices.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual NOTE: Dual-purpose (DHCP/TFTP) server utilit y software may require entry of the configuration file name and path within the user interface.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual disable autoconfig Purpose Use this to deactivate autoconfiguration from DHCP. Syntax disable autoconfig Description This instructs the Switch not to accept autoconfiguration instruction from the DHCP server.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 9 N ETWORK M ONIT ORING C OMMANDS The network monitoring commands in the Command Line Interface (C LI) are listed (along with the appropriate parameters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show packet ports Parameters <portlist> − Specifies a range of ports to be displayed. The port list is specified by listing the lo west slot number and the beginning port number on that slot, separated by a colon.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To display the errors of the port 3 of module 1: DES-6500:4#show errors ports 1:3 Command: show errors ports 1:3 RX Fr.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show utilization ports Command: show utilization ports Port TX/sec RX/sec Util Port TX/sec RX/sec Util ---- ---------- ---.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show stack_information Command: show stack_information Box Prio- Prom Runtime H/W ID Type Exist rity version version version --- ----------- ----- ----- -------- -------- -------- 1 DES-6507 exist 16 2.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual clear log Purpose Used to clear the Switch’s history log. Syntax clear log Description This command will clear the Switch’s history log. Parameters None. Restrictions Only administrator-lev el users can issue this command.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual enable syslog Purpose Used to enable the system log to be sent to a remote host. Syntax enable syslog Description The enable syslog command enables the system log to be sent to a remote host.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show syslog Purpose Used to display the syslog protocol status as enabled or disabled. Syntax show syslog Description The show syslog command displays the syslog status as enabled or disabled.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create syslog host facility − Some of the operating syst em daemons and processes have been assigned Facility values.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create syslog host where syslog messages will be sent. state [enabled | disabled] − Allows the sending of syslog messages to the remote host, specified above, to be enabled and disabled.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config syslog host warning − Specifies that warning messages will be sent to the remote host. This corresponds to number 4 from the list above. all − Specifies that all of the cu rrently supported syslog messages that are generated by the Switch will be sent to the remote host.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config syslog host remote host. This corresponds to number 23 from the list above. udp_port <udp_port_number> − Specifies the UDP port number that the syslog protocol will use to send messages to the remote host.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config syslog host all severity − Severity level indicator, as described below: Bold font indicates that the corresponding severity level is currently supported on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config syslog host all local0 − Specifies that local use 0 messages will be sent to the remote host. This corresponds to number 16 from the list above. local1 − Specifies that local use 1 messages will be sent to the remote host.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual delete syslog host Purpose Used to remove a sysl og host, that has been previously configured, from the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config system_severity Purpose To configure when and wher e severity messages are to be recorded. Syntax config system_sev erity [trap | log | all] [critical | warning | information] Description This command is used to confi gure the system severity levels on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config system_sev erity trap critical Command: config system_sev erity trap critical Success. DES-6500:4# show system_severity Purpose To display the current severity settings set on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 10 M UL TIPLE S P ANNING T REE P ROT OCOL (MSTP) C OM MANDS This switch supports three versions of the Spanning Tree Pr otocol; 802.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Command Parameters config stp priority <value 0-61440> instance_id <value 0-15> config stp mst_config_id {revision_level .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#disable stp Command: disable stp Success. DES-6500:4# config stp version Purpose Used to globally set the version of STP on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config stp values consistent with other devices on the bridged LAN. If the value ages out and a BPDU has still not been received from the Root Bridge, the Switch will start sending its own BPDU to all other switches for permission to become the Root Bridge.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config stp maxage 18 maxhops 15 Command: config stp maxage 18 maxhops 15 Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config stp ports stations or segments that are capable of being upgraded to 802.1w RSTP or 802.1s MSTP on all or some portion of the segment. edge [true | false] – true designates the port as an edge port.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To create a spanning tree instance 2: DES-6500:4#create stp instance_id 2 Command: create stp instance_id 2 Success. DES-6500:4# config stp instance_id Purpose Used to add or delete an STP instance ID.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config stp instance_id 2 remove_vlan 10 Command : config stp instance_id 2 remove_vlan 10 Success. DES-6500:4# delete stp instance_id Purpose Used to delete a STP in stance ID from the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To set the priority value fo r instance_id 2 as 4096: DES-6500:4#config stp priority 4096 instance_id 2 Command : config stp priority 4096 instance_id 2 Success. DES-6500:4# config stp mst_config_id Purpose Used to update the MSTP configuration identification.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config stp mst_ports higher priority value for interfaces to be selected for forwarding first. In instances where the priori ty value is identical, the MSTP function will implement the lowest port number into the forwarding state and other interfaces will be blocked.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show stp Purpose Used to display the Switch ’s current STP configuration. Syntax show stp Description This command displays the Sw itch’s current STP configuration. Parameters None.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Max Age : 20 TX Hold Count : 3 Forw arding BPDU : Enabled Loopback Detection : Enabled LBD Recover Time : 60 DES-6500:4# show stp ports Purpose Used to display the Switch’s current instance_id configuration.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show stp instance_id configuration for the CIST internally set on the Switch. Restrictions None.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show stp mst_config_id Command: show stp mst_config_id Current MST Configuration Identification --------------------------.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 11 F ORW ARDING D A T ABASE C OMM ANDS The forwarding database comma nds in the Command Line Interface (CLI) are listed (along with the appropriate param eters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#create fdb default 00-00-00-00-01-02 port 2:5 Command: create fdb default 00-00-00-00-01-02 port 2:5 Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config multicast_fdb <portlist> − Specifies a range of ports to be displayed the beginning port number on that slot, separated by a colon. Then the highest slot number, and the highest port number of the range (also separated by a colon) are specified.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config fdb aging_time Purpose Used to set the aging time of the forwarding database. Syntax config fdb aging_time <sec 10-1000000> Description The aging time affects the learning process of the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#delete fdb default 00-00-00-00-01-02 Command: delete fdb default 00-00-00-00-01-02 Success. DES-6500:4# Example usage: To delete a multicast fdb entry: DES-6500:4#delete fdb default 01-00-00-00-01-02 Command: delete fdb default 01-00-00-00-01-02 Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show multicast_fdb Purpose Used to display the contents of the Switch’s multicast forwarding database.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To display unicast M AC address table: DES-6500:4#show fdb Command: show fdb Unicast MAC Address Aging Time = 300 VID .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show ipfdb Command: show ipfdb Interface IP Address Port Learned ------------ --------------- ------ ------------ System 10.0.0.1 1:13 Dy namic System 10.0.0.2 1:13 Dy namic System 10.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 12 B ROADCAST S TOR M C ONTROL C OMM ANDS On a computer network, packets such as Multicast packets and B roadcast packets continually flood the net work as normal procedure.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config traffic control latter of which will now provide shutdown, recovery and trap notification functions for the Switch. Parameters <portlist> − Used to specify a range of ports to be configured for traffic control.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config traffic control and the port is still experienci ng packet storms, the port will be placed in shutdown forever mode and can only be manually recovered using the config traffic control_recover command.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4# config traffic control_recover 1:1-1:5 Command: config traffic control_recover 1:1-1:5 Success. DES-6500:4# config traffic control_trap Purpose Used to configure the trap se ttings for the packet storm control mechanism.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show traffic control traffic control settings. This is s pec ified by listing the lowest switch number and the beginning port number on that switch, separated by a colon.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 13 Q O S C OMM ANDS The xStack DES-6500 supports 802.1p priority queuing. This switc h has eight classes of service for each port on the Switch, one of which is internal and not configurable to the user.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Command Parameters config bandwidth_control [<por tlist> | all] {rx_rate [no_limit | <value 1-9999>] | tx_rate [no_limit .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config bandwidth_control <value 1-9999> − Specifies the packet limit, in Mbps, that the above ports will be allowed to transmit. Restrictions Only administrator-lev el users can issue this command.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show bandw idth_control 1:1-1:10 Command: show bandw idth_control 1:1-1:10 Bandw idth Control Table Port RX Rate (Mbit/sec.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config scheduling combination of strict and we ight-fair (weighted round-robin “ WRR ” ) scheduling. Priority classes that have a 0 in the max_packet field will forward packets with strict priority scheduling.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show scheduling Purpose Used to display the currently configured traffic scheduling on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config 802.1p user_priority 4 4 5 5 6 6 7 6 Parameters <priority 0-7> − Specifies which of the ei ght 802.1p priority tags (0 through 7) to map to one of the Switch’s hardware priority classes of service ( <class_id> , 0 through 6).
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config 802.1p default_priority Purpose Used to specify default prio rity settings on the Switch. Untagged packets that are received by the Sw itch will be assigned a priority tag in its priority field using this command.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To display the current 802.1p defaul t priority configurati on on the Switch: DES-6500:4# show 802.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config scheduling_mechanism Parameters strict – Entering the strict parameter indicates that the highest class of service is the first to be processed. That is, the highest class of service should finish emptying before the others begin.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual enable hol_prevention Purpose Used to enable HOL prevention. Syntax enable hol_prevention Description The enable hol_prevention command enables Head of Line prevention. Parameters None.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show hol_prevention Purpose Used to show HOL prevention. Syntax show hol_prevention Description The show hol_prevention command displays the Head of Line prevention state. Parameters None.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 14 P ORT M IRRORING C OMMANDS The port mi rroring comma nds in the Command Line Interface (CLI) are listed (along with the appropriate param eters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To add the mirrori ng ports: DES-6500:4# config mirror port 1:10 add source ports 1:1-1:5 both Command: config mirror port 1:10 add source ports 1:1-1:5 both Success. DES-6500:4# config mirror port delete Purpose Used to delete a port mirroring configuration.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual enable mirror Purpose Used to enable a previously entered port mirroring configuration.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show mirror Purpose Used to show the current port mirroring configuration on the Switch. Syntax show mirror Description This command displays the current port mirroring configuration on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 15 VLAN C OMM ANDS The xStack DES-6500 incorporates protocol -based VLANs. This standard, defined by the IEEE 802.1v standard maps packets to protocol-defin ed VLANs by examining the type o ctet within th e packet header to discover the type of protocol associated with it.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create vlan tag <vlanid 2-4094> − The VLAN ID of the VLAN to be created. Allowed values = 2-4094 type – This parameter uses the type field of the packet header to determine the packet protocol and destination VLAN.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create vlan information is defined by the Systems Network Architecture (SNA) 802.2 Protocol.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual NOTE: A specific protocol VLAN and a user defined protocol VLAN with the same encapsulation protocol c annot coexist and will result in a Fail! Message.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config vlan add Description This command allows the user to add ports to the port list of a previously configured VLAN. Addi tional ports may be specified as tagging, untagging, or forbidden.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config vlan delete specifies all of the ports between slot 1, port 3 and slot 2, port 4 − in numerical order.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config gvrp 1:1-1:4 state enabled ingress_checking enabled acceptable_frame tagged_only pv id 2 Command: config gvrp 1:1-1:4 state enabled ingress_checking enabled acceptable_frame tagged_only pv id 2 Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show vlan Purpose Used to display the current VLAN configuration on the Switch. Syntax show vlan {<vlan_name 32>} Description T.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show gvrp Purpose Used to display the GVRP st atus for a port list on the Switch. Syntax show gvrp {<portlist>} Description This command displays the GVRP status for a port list on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 16 L INK A GGREGA TION C OMMANDS The link aggregation comma nds in the Command Line Interface (CL I) are listed (along with the appropriate parameters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#create link_aggregation group_id 1 Command: create link_aggregation group_id 1 Success. DES-6500:4# delete link_aggregation group_id Purpose delete link_aggregation group_id <value 1-32> This command is used to delete a previously configured link aggregation group.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Parameters group _id <value 1-32> − Specifies the group ID. The Switch allows up to 32 link aggregation groups to be configured. The group number identifies each of the groups.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config link_aggregation algorithm Purpose Used to configure the link aggregation algorithm.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show link_aggregation Purpose Used to display the current link aggregation configuration on the Switch. Syntax show link_aggregation {group_id <value 1-32> | algorithm} Description This command will display t he current link aggregation configuration of the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config lacp_port Purpose Used to configure setti ngs for LACP compliant ports. Syntax config lacp_port <portlist> mode [active | passive] Description This command is used to configure ports that have been previously designated as LACP ports (see create link_aggregation).
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show lacp_port Purpose Used to display current LACP port mode settings. Syntax show lacp_port {<portlist>} Description This command will display the LACP mode settings as they are currently configured.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 17 IP C OMM ANDS (I NCLUDING M UL TIPLE IP INTERF ACES PER VLAN ) Multiple IP interfaces per VLAN is a functi on that allows multiple IP interfaces to be assigned to the sam e VLAN.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create ipif to be created. The address and mask information can be specified using the traditional format (for ex ample, 10.1.2.3/255.0.0.0) or in CIDR format, (10.1.2.3/8). <vlan_name 32> − The name of the VLAN that will be associated with the above IP interface.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config ipif vlan <vlan_name 32> − The name of the VLAN corresponding to the previously created IP interf ace. If a primary and secondary IP interface are configured for the same VLAN (subnet), the user cannot change the VLAN of the IP interface.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual disable ipif Purpose Used to disable the configurat ion of an IP interface on the Switch. Syntax disable ipif {<ipif_name 12> | all} Description This command will disable an IP interface on the Switch, without altering its configuration values.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show ipif Purpose Used to display the configurat ion of an IP interface on the Switch. show ipif {<ipif_name 12>} This command will display the configuration of an IP interface on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 18 IGMP C OMM ANDS (I NCLUDING IGMP V 3) IGMP or Internet Group Management Protoc ol is a protocol implemented by system s utilizing .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config igmp last_member_query_interv al <value 1-25> | state [enabled | disabled]} Description This command allows IGMP to be configured on the Switch. <ipif_name 12> − The name of the IP interface for which to configure IGMP.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To display IGMP confi gurations: DES-6500:4#show igmp Command: show igmp IGMP Interface Configurations Interface IP Address/Netmask V.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show igmp group ipif System group 224.0.1.1 Command: show igmp group ipif System group 224.0.1.1 Interface Name Multicast Group Last Reporter IP Querier IP Expire -------------------- ------------------- --------------------- ------------------ -------------- System 224.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 19 IGMP S NOOPING C OMM ANDS The IGMP Snooping comma nds in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config igmp_snooping default is 260 seconds. leave_timer <sec 1-16711450> − Leave timer. The default is 2 seconds. state [enabled | disabled] − Allows the user to enable or disable IGMP snooping for the specified VLAN.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config igmp_snooping querier interval) + (1 x query response interval). • Other querier present interval—A mount of time that must pass before a multicast router decides that there is no longer another multicast router that is the querier.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To enable IGMP snooping on the Swi tch: DES-6500:4#enable igmp_snooping Command: enable igmp_snooping Success. DES-6500:4# disable igmp_snooping Purpose Used to enable IGMP snooping on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config router_ports number and the beginning port number on that slot, separated by a colon. Then the highest slot number, and the highest port number of the range (also separated by a colon) are specified.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config router_ports_forbidden default add 2:1-2:10 Command: config router_ports_forbidden default add 2:1-2:10 Success. DES-6500:4# show router_ports Purpose Used to display the current ly configured router ports on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show igmp_snooping Parameters <vlan_name 32> − The name of the VLAN for which to view the IGMP snooping configuration.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: VLAN Name : default MAC address : 01-00-5E-00-00-02 Reports : 2 To show igmp snooping group: DES-6500:4#show igmp_snooping group Command: show igmp_snooping group Multicast group: 224.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To view the IGMP snooping forwarding t able for VLAN “Trinity”: DES-6500:4#show igmp_snooping forw arding vlan Trinity Command: show igmp_snooping forw arding vlan Trinity VLAN Name : Trinity Port Member : 1:17 Multicast group : 224.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 21 A CCESS A UTHENTICA TION C ONTROL C OM MANDS The Access Authentication Control comma nds allows secure access to the Switch us ing the TACACS / XTACACS / TACACS+ and RADIUS protocols.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual NOTE: TACACS, XTACACS and TACACS+ are separate entities and are not compatible. The Switch and the se rver must be configured exactly the same, using the same protocol. (For ex ample, if the Switch is set up for TACACS authentication, so must be the host server.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Command Parameters show authen server_host config authen parameter response_timeout <int 1-255> <int 1-255> show authen p.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To disable the system access authentication policy: DES-6500:4#disable authen_policy Command: disable authen_policy Success. DES-6500:4# show authen_policy Purpose Used to display the system access authentication policy status on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#create authen_login method_list_name Trinity Command: create authen_login method_list_name Trinity Success. DES-6500:4# config authen_login Purpose Used to configure a user-defined or default method list of authentication methods for user login.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config authen_login authenticated using the local user account database on the Switch. none – Adding this parameter will require no authentication to access the Switch. method_list_name – Enter a previously implemented method list name defined by the user.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config authen_login default method xtacacs tacacs+ local Command: config authen_login default method xtacacs tacacs+ local Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show authen_login security protocols which are permanently set in the Switch. Keyword refers to authentication using a technique inst.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#create authen_enable method_list_name Permit Command: show authen_login method_list_name Permit Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config authen_enable require the user to be authenticated using a user-defined server group previously configured on the Switch. local_enable – Adding this parameter will require the user to be authenticated using the local user account database on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config authen_enable default method xtacacs tacacs+ local Command: config authen_enable default method xtacacs tacacs+ local Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show authen_enable refers to server groups defined by the user. Built-in Group refers to the TACACS/XTA CACS/TACACS+ and RADIUS security protocols which are permanently set in the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config authen application telnet – Choose this parameter to configure the telnet login method. ssh - Choose this parameter to configure the SSH (Secure Shell) login method. http – Choose this parameter to configure the web interface login method.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show authen application Command: show authen application Application Login Method List Enable Method List ----------------.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create authen server_host <key_string 254> - Specify an alphanumeric string up to 254 characters to be a key for the TACACS server. none – Specify this parameter to not use any key.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config authen server_host TACACS protocol. xtacacs - Enter this parameter if the server host utilizes the XTACACS protocol. tacacs+ - Enter this parameter if the server host utilizes the TACACS+ protocol.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual delete authen server_host tacacs – Enter this parameter if the server host utilizes the TACACS protocol. xtacacs - Enter this parameter if the server host utilizes the XTACACS protocol.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show authen server_host Command: show authen server_host IP Address Protocol Port Timeout Retransmit Key --------------- -------- ----- ------- --------------- -------- 10.53.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config authen server_group built into the Switch (TACACS/XT ACACS/TACACS+/RADIUS), or by a user-defined group previously created using the create authen server_group command. [add | delete] – Enter the correct parameter to add or delete a server host from a server group.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual delete authen server_group Purpose Used to delete a user-def ined authentication server group. Syntax delete authen server_group <string 15> Description This command will delete an authentication server group.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show authen server_group Command: show authen server_group Group Name IP Address Protocol --------------- --------------- -------- radius ---------------------------------------- Darren 10.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config authen parameter attempt Purpose Used to configure the maximu m number of times the Switch will accept authentication attempts.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show authen parameter Command: show authen parameter Response timeout: 60 seconds User attempts : 5 DES-6500:4# enable admin Purpose Used to promote user level privileges to administrator level privileges.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config admin local_enable Parameters <password 15> - After entering this command, the user will be prompted to enter the old password, then a new password in an alphanumeric string of no more than 15 characters, and finally prompted to enter the new password again to confirm.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 22 SSH C OMM ANDS The steps required to use the SSH protocol for secure com munica tion bet ween a remote PC (the SSH Cl ient) and th.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual enable ssh Purpose Used to enable SSH. Syntax enable ssh Description This command is used to enable SSH on the Switch. Parameters None. Restrictions Only administrator-lev el users can issue this command.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config ssh authmode Parameters password – This parameter may be c hosen if the administrator wishes to use a locally configured password for authentication on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config ssh server Purpose Used to configure the SSH server. Syntax config ssh server {maxsession <int 1-8> | contimeout <sec.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4# show ssh server Command: show ssh server SSH Max Session : 3 SSH Server Status : Disabled Connection timeout : 120 (sec) Authenticate failed attempts : 2 Rekey timeout : Nev er Listened Port Number : 22 DES-6500:4# config ssh user Purpose Used to configure the SSH user.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4# config ssh user Trinity authmode Password Command: config ssh user Trinity authmode Password Success. DES-6500:4# show ssh user authmode Purpose Used to display the SSH user setting.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config ssh algorithm AES256 - This parameter will enable or disable the Advanced Encryption Standard AES256 encryption algorithm. arcfour - This parameter will enable or disable the Arcfour encryption algorithm.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Usage Example: To display SSH algorithms currently set on the Switch: DES-6500:4#show ssh algorithm Command: show ssh algorithm Encry.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 23 SSL C OMMANDS Secure Sockets Layer or SSL is a security feature that will prov ide a secure communication path between a host an d client through the use of authentication, digi tal signatures and encrypti on.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Each command is listed, in detail, in the followin g sections. enable ssl Purpose To enable the SSL function on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual NOTE: Enabling the SSL function on the Switch will disable the port for the web manager (port 80). To log on to the web based manager, the entry of your URL must begin with https:// . (ex.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config ssl cachetimeout Purpose Used to configure the SSL cache timeout. Syntax config ssl cachetimeout timeout <value 60-86400> Description This command will set the time between a new key exchange between a client and a host using the SSL function.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show ssl Purpose Used to view the SSL status and the certificate file status on the Switch. Syntax show ssl {certificate} Description This command is used to view the SSL status on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual download certificate Parameters <ipaddr> - Enter the IP address of the TFTP server. certfilename <path_filename 64> - Enter the path and the filename of the certificate file to download.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 24 802.1X C OMM ANDS The xStack DES-6500 implement the server-s ide of the IEEE 802.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Command Parameters statistics show auth_statistics {por ts [<portlist> | all]} Each command is listed, in detail, in the followin g sections. enable 802.1x Purpose Used to enable the 802.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create 802.1x user Purpose Used to create a new 802.1x user. create 802.1x user <username 15> The create 802.1x user command is used to create new 802.1x users. <username 15> − A username of up to 15 alphanumeric characters in length.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual delete 802.1x user Used to delete an 802.1x user account on the Switch. delete 802.1x user <username 15> The delete 802.1x user command is used to delete the 802.1x Port- based or MAC-based Network Access control local users currently configured on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show 802.1x auth_configuration forces the Authenticator of t he port to become Authorized. ForceUnauth forces the por t to become Unauthorized. QuietPeriod − Shows the time interval between authentication failure and the start of a new authentication attempt.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show 802.1x auth_state Purpose Used to display the current authentication stat e of the 802.1x server on the Switch. Syntax show 802.1x auth_state {ports [<portlist> | all]} Description The show 802.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 1:11 ForceAuth Success Authorized 1:12 ForceAuth Success Authorized 1:13 ForceAuth Success Authorized 1:14 ForceAuth Success Authoriz.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To configure 802.1x authentication by MAC address: DES-6500:4#config 802.1x auth_mode mac_based Command: config 802.1x auth_mode mac_based Success. DES-6500:4# config 802.1x capability ports Purpose Used to configure the 802.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config 802.1x auth_parameter Purpose Used to configure the 802. 1x Authentication parameters on a range of ports. The default parameter will return all ports in the specified range to their default 802.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config 802.1x auth_parameter sending packets to a supplicant (user). reauth_period <sec 1-65535> − Configures the time interval between successive re-authentications. enable_reauth [enable | disable] − Determines whether or not the Switch will re-authenticate.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config 802.1x init Purpose Used to initialize the 802. 1x function on a range of ports. Syntax config 802.1x init [port_based ports [<portlist>| all] | mac_based [ports] [<portlist> | all] {mac_address <macaddr>] Description The config 802.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config 802.1x reauth ports Purpose Used to configure the 802.1x re-authentication feature of the Switch. Syntax config 802.1x reauth [port_based ports [<portlist>| all] | mac_based [ports] [<portlist> | all] {mac_address <macaddr>] Description The config 802.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config radius add Purpose Used to add a new RADIUS server. Syntax config radius add <server_index 1-3> <server_ip> key &l.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config radius delete 1 Command: config radius delete 1 Success. DES-6500:4# config radius Purpose Used to configure t he Switch’s RADIUS settings.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To display RADIUS settings on th e Switch: DES-6500:4#show radius Command: show radius Idx IP Address Auth-Port Acct-Port Status Key Number Number ----- ------------------ --------- --------- ----------- ------------ 1 10.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show auth_client Purpose Used to display the curr ent RADIUS authentication client. show auth_client The show auth_client command is used to display the current RADIUS authentication client curr ently configured on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show auth_diagnostics all – Specifies that all ports will be viewed. Restrictions None.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To display the current auth entication session statistics for p ort 16: DES-6500:4#show auth_session_statistics ports 1:16 Command: s.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show auth_statistics ports 1:16 Command: show auth_statistics ports 1:16 Port number : 1:16 EapolFramesRx 0 EapolFramesTx .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 25 A CCESS C ONTROL L IST (ACL) C OMMANDS (I NCLUDING CPU) The xStack DES-6500 implement Access Contro l Lists that enable the Switch to deny network access to specific devices or device groups based on IP settings, MAC addre ss, packet content and IPv6 settings.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Command Parameters delete cpu access_profile profile_id <value 1-5> config cpu access_profile profile_id <value 1-5> [add.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual The ip parameter instructs the Switch that this new rule will be applied to the IP addresses contained within each fram e’s header. source_ip tells the Switch that this rule w ill apply to the source IP addresses in each frame’s header.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Command Parameters create access_profile profile_id <value 1-8> [ethernet {vlan | source_mac <macmask> | destination_mac <macmask> | 802.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create access_profile (for Ethernet) Used to create an access profile on the Switch by examining the Ethernet part of the packet header. Masks entered can be combined with the values the Switch finds in the specified frame header fields.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config access_profile profile_id (for Ethernet) Purpose Used to configure the Ethernet access profile on the Switch and to define specific values for the rules that will be used to by the Switch to determine if a given packet should be forwarded or filtered.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config access_profile profile_id (for Ethernet) permitted to be forwarded by the Switch. replace_dscp <value 0-63> − Allows specification of a value to be written to the DSCP field of an incoming packet that meets the criteria specified in the first par t of the command.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create access_profile (IP) 0x0-0xffff> | dst_port_mask <hex 0x0-xffff>} | protocol_id {user _mask <hex 0x0-0xffffffff>.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create access_profile (IP) mask for the destination port. • protocol_id − Specifies that the Switch will examine each frame’s Protocol ID field.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config access_profile profile_id (IP) packet to see if it will be either forwarded or filtered based on one or more of the following: • vlan <vlan_name 32> − Specifies that the access profile will apply to only to this VLAN.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config access_profile profile_id (IP) their header. • protocol_id <value 0-255> − Specifies that the Switch will examine the Protocol field in each packet and if this field contains the value entered here, apply the appropriate rules.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create access_profile (packet content mask) Purpose Used to create an access profile on the Switch by examining the Ethernet part of the packet header. Packet content masks entered will specify certain bytes of the packet header to be identified by the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config access_profile profile_id (packet content mask) Purpose To configure the rule for a previously created access profile command based on the packet content mask. Packet content masks entered will specify certain bytes of the packet header to be identified by the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config access_profile profile_id (packet content mask) specifies switch number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1, port 3 and switch 2, port 4 − in numerical order.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create access_profile (ipv6) Purpose Used to create an access profile on the Switch by examining the IPv6 part of the packet header. Masks can be entered that will be combined with the values the Switch finds in the specified frame header fields.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config access_profile profile_id (ipv6) Purpose Used to configure the IPv6 access profile on the Switch and to define specific values for the rules that will be used to by the Switch to determine if a given packet should be forwarded or filtered.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config access_profile profile_id (ipv6) used to determine the CoS queue to which packets are forwarded to. Once this field is specified, packets accepted by the Switch that match this pr iority are forwarded to the CoS queue specified previously by the user.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4# delete access_profile profile_id 1 Success. Command: delete access_profile profile_id 1 DES-6500:4# show access_profile Purpose Used to display the current ly configured access profiles on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 2 ====================================================================== Access Profile ID: 3 TYPE : Packet Content =================.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create cpu access_profile address mask. • destination_mac <macmask> - Specifies to examine the destination MAC address mask. • ethernet_type − Specifies that the switch will examine the Ethernet type value in each frame’s header.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create cpu access_profile • dst_port_mask <hex 0x0-0xffff> − Specifies a UDP port mask for the destination port. • protocol_id − Specifies that the Switch will examine each frame’s Protocol ID field.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To delete the cpu access profile with a profile ID of 1: DES-6500:4#delete cpu access_profile profile_id 1 Command: delete cpu access_profile profile_id 1 Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config cpu access_profile • vlan <vlan_name 32> − Specifies that the access profile will apply to only to this VLAN. • vlan <vlan_name 32> − Specifies that the access profile will apply to only this VLAN.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config cpu access_profile in their header. • protocol_id <value 0-255> − Specifies that the Switch will examine the protocol field in each packet and if th is field contains the value entered here, apply the following rules.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual enable cpu_interface_filtering Purpose Used to enable CPU interface filtering on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show cpu_interface_filtering Parameters None. Restrictions Only administrator-lev el users can issue this command.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 26 S AFEGUARD E NGINE C OMM ANDS Periodically, malicious hosts on the network will attack the Switc h by utilizing packet flooding (A RP Storm ) or other methods. These attacks may increase the CPU utilization beyond its capability.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config safeguard_engine Purpose Used to configure the Saf eguard Engine settings for the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show safeguard_engine Purpose To display the Safeguard E ngine parameters currently set in the Switch. Syntax show safeguard_engine Description This command is used to s how the Safeguard Engine information currently set on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 26 T RAFFIC S EGMENT A TION C OM MANDS Traffic segmentation allows you to further sub-divide VLANs into sm aller groups of ports that will help to reduce traffic on th e VLAN. The VLAN rules take precedence, a nd then the traffic segmentation rules are applied.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show traffic_segmentation Purpose Used to display the current tr affic segmentation configuration on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 28 D-L INK S INGLE IP M ANAGEMENT C OM MANDS Simply put, D-Link Single IP Management is a con cept that will stack switches tog ether over Eth ernet instead o f using stacking ports or m odules.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 2. CS’s m ust change their role to CaS and then to M S, to become a MS of a SIM group. Thus the CS cannot directly be converted to a MS. 3. The user can manually configure a CS to become a CaS.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual enable sim Purpose Used to enable Single IP Management (SIM) on the Switch Syntax enable sim Description This command will enable SIM gl obally on the Switch. SIM features and functions will not function pr operly unless this function is enabled.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show sim Description This command will display the current information regarding the SIM group on the Switch, including the following: SIM Version - Displays the current Single IP Management version on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show sim Command: show sim SIM Version : VER-1 Firmw are Version : Build 3.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To show other groups informati on in summa ry, if group is specified: DES-6500:4#show sim group Command: show sim group SIM Group Nam.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual reconfig Purpose Used to connect to a member switch, through the commander switch using telnet. Syntax reconfig [member_id <value 1-32> | exit] Description This command is used to reconnec t to a member switch using telnet.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config sim_group delete 1 Command: config sim_group delete 1 Please w ait for ACK... Success. DES-6500:4# config sim Purpose Used to configure role param eters for the SIM protocol on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config sim commander dp_interval 30 Command: config sim commander dp_interval 30 Success. DES-6500:4# To change the hold tim e of the discovery protocol: DES-6500:4# config sim commander hold_time 120 Command: config sim commander hold_time 120 Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual download sim_ms Purpose Used to download firmware or configuration file to an indicated device.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#dow nload sim_ms configurati on 10.53.13.94 c:/dgssri.txt members all Command: dow nload sim_ms configuration 10.53.13.94 c:/dgssri.txt members all This device is updating configuration.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 29 T IME AND SNTP C OMMANDS The Simple Net work Time Protocol (SNTP) {an adaptat ion of the Network Time Protocol (NTP)} comma nds in the Command Line Interface (CLI) are listed (along with the a ppropriate parameters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To configure SNTP settings: DES-6500:4#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30 Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30 Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#enable sntp Command: enable sntp Success. DES-6500:4# disable sntp Purpose Disables SNTP server support. Syntax disable sntp Description This will disable SNTP s upport. SNTP service must be separately configured (see config sntp).
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config time 30jun2003 16:30:30 Command: config time 30jun2003 16:30:30 Success. DES-6500:4# config time zone Purpose Used to determine the time zone used in order to adjust the system clock.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config dst requirement. DST adjustment effects system time for both manually configured time and time set using SNTP service. Parameters disable - Disable the DST seasonal time adjustment for the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config dst e_date - Configure the specific date (day of the month) to begin DST. • <end_date 1-31> - The end date is expressed numerically. offset [30 | 60 | 90 | 120] - Indicates number of minutes to add or to subtract during the summertime.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 30 ARP C OMM ANDS The ARP commands in the Com mand Line Interface (CLI) are liste d (along with the appropriate param eters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual delete arpentry table. Parameters <ipaddr> − The IP address of the end node or station. all − Deletes all ARP entries. Only administrator-lev el users can issue this command.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show arpentry Parameters ipif <ipif_name 12> − Enter the IP interface name for which to display ARP settings. static − Displays the static entries to the ARP table. Restrictions None.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To display an entry in th e ARP table: DES-6500:4#show arpentry ipaddress 10.1.1.169 Command: show arpentry ipaddress 10.1.1.169 ARP Aging Time : 30 Interface IP Address MAC Address Type ------------- --------------- ----------------- --------------- System 10.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 31 VRRP C OMM ANDS VRRP or Virtual Routing Redundancy Prot ocol is a function on the Switch that dynami cally assigns responsibility for a virtual router to one of the VRRP routers on a LAN.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example Usage: To enable VRRP globally on the Switch: DES-6500:4#enable vrrp Command: enable vrrp Success. DES-6500:4# Example usage: To enable the virtual IP address to be pi nged: DES-6500:4#enable vrrp ping Command: enable vrrp ping Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create vrrp vrid Purpose To create a VRRP router on the Switch. Syntax vrid <vrid 1-255> ipif <ipif_name 12> ipaddress &l.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create vrrp vrid network connections. critical_ip_state [enable | disable] - This parameter is used to enable or disable the critical IP addr ess entered above. The default is disable.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config vrrp vrid gateway that will be statically assigned to end hosts and must be set for all routers that participate in this group.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config vrrp ipif Parameters authtype – Specifies the type of authentication used. The authtype must be consistent with all rout ers participating within the VRRP group.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show vrrp Command: show vrrp Global VRRP :Enabled Non-ow ner response PING : Disabled Interface Name : System Authentication type : No Authentication VRID : 2 Virtual IP Address : 10.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 32 R OUTING T ABLE C OMM ANDS The routing table comma nds in the Command Line Interface (CLI) are listed (along with the appropriate param eters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create iproute default Purpose Used to create IP route entries to the Switch’s IP routing table. Syntax create iproute default <ipaddr> {<metric>} Description This command is used to create a default static IP route entry to the Switch’s IP routing table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual delete iproute default Purpose Used to delete a default IP route entry from the Switch’s IP routing table. Syntax delete iproute default <ipaddr> Description This command will delete an existing default entry from the Switch’s IP routing table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 33 R OUTE R EDISTRIBUTION C OMM ANDS The route redistribution comma nds in the Command Line Interface (CLI) are listed (al ong with the appropriate parameters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Route Source Metric Metric Type RIP 0 to 16777214 mettype 1 mettype 2 Static 0 to 16777214 mettype 1 mettype 2 Local 0 to 16777214 mettype 1 mettype 2 Allowed Metric Type combinations are mettype 1 or mettype 2 .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Routing inform ation source − OSPF and the Static Route table. Routing information will be redi stributed to RIP. The following table lists the allowed values for th e routing metrics and the types (or forms) of the rou ting information that will be redistr ibuted.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config route redistribute dst ospf src • Type-1 calculates the metric (for RIP to OSPF) by adding the destination’s interface cost to the metric entered in the Metric field. • Type-2 uses the metric entered in the Metric field without change.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config route redistribute dst rip src Parameters src {all | internal | external | type_1 | type_2 | inter+e1 | inter+e2} − Allows the selection of the protocol of the source device.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example Usage: To delete route redist ribution settings: DES-6500:4#delete route redistribute dst rip src ospf Command: delete route redistribute dst rip src ospf Success. DES-6500:4# show route redistribute Purpose Used to display the route redistribution on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 34 DHCP R ELA Y C OM MANDS The DHCP relay commands in the Com mand Line Interface (CLI) are listed (along with the appropriate param eters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config dhcp_relay add ipif Purpose Used to add an IP destination address to the Switch's DHCP/BOOTP relay table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config dhcp_relay option_82 state Purpose Used to configure the state of DHCP relay agent information option 82 of the switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To configure DHCP relay opti on 82 check: DES-6500:4#config dhcp_relay option_82 check enable Command: config dhcp_relay option_82 check enable Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To show the DHCP relay configurat ion: DES-6500:4#show dhcp_relay Command: show dhcp_relay DHCP/BOOTP Hops Count Limit : 2 System 10.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual disable dhcp_relay Used to disable the DHCP/BOOTP relay function on the switch. Syntax disable dhcp_relay Description This command is used to disable the DHCP/BOOTP relay function on the switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 35 DNS R ELA Y C OM MANDS The DNS relay commands in the Comm and Line Interface (CLI) ar e listed (along with the appropriate parame ters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config dnsr add static dns1 10.43.21.12 Command: config dnsr add static dns1 10.43.21.12 Success. DES-6500:4# Example Usage: To delete an entry dom ain name dns1, IP address 10.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#enable dnsr cache Command: enable dnsr cache Success. DES-6500:4# Example Usage: To enable static ta ble lookup for DNS relay. DES-6500:4#enable dnsr static Command: enable dnsr static Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#disable dnsr cache Command: disable dnsr cache Success. DES-6500:4# Example Usage: To disable static t able lookup for DNS relay. DES-6500:4#disable dnsr static Command: disable dnsr static Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 36 RIP C OMM ANDS The RIP comma nds in the Command Line Inte rface (CLI) are listed (along with the a ppropriate parameters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config rip reception of RIP packets. state [enabled | disabled] − Allows RIP to be enabled and disabled on the Switch. Restrictions Only administrator-lev el users can issue this command.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To disable rip: DES-6500:4#disable rip Command: disable rip Success. DES-6500:4# show rip Purpose Used to display the RIP c onfiguration and statistics for the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 37 DVMRP C OMM ANDS The DVMRP comma nds in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config dvmrp state [enabled | disabled] − Allows DVMRP to be enabled or disabled. Restrictions Only administrator-lev el users can issue this command.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example Usage: Command: disable dvmrp To disable DVMRP: DES-6500:4#disable dvmrp Success.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show dvmrp neighbor Parameters <ipif_name 12> − The name of the IP interface for which to display the DVMRP neighbor table. ipaddress <network_address> − The IP address and netmask of the destination.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show dvmrp nexthop Command: show dvmrp nexthop Source IP Address/Netmask Interface Name Type ----------------- --------------- ------ 10.0.0.0/8 ip2 Leaf 10.0.0.0/8 ip3 Leaf 20.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 38 PIM C OMM ANDS The PIM comma nds in the Command Line Inte rface (CLI) are listed (along with the a ppropriate parameters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config pim ipif System he llo 35 jp_interval 70 state enabled Command: config pim ipif System he llo 35 jp_interval 70 state enabled Success. DES-6500:4# enable pim Purpose Used to enable PIM function on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show pim neighbor Purpose Used to display PIM neighbor router table entries. Syntax show pim neighbor {ipif <ipif_name 12> | ip.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To display PIM sett ings as configured on the Switch: DES-6500:4#show pim Command: show pim PIM Global State : Disabled PIM-DM Interface Table Hello Join/Prune Interface IP Address Interval Interval State ------------ --------------- -------- ---------- -------- System 10.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 39 IP M UL TICASTING C OMM ANDS The IP multicasting comm ands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show ipmc Purpose Used to display the IP multicast interface table. show ipmc {ipif <ipif_name 12> | protocol [inactive | dvmrp | pim} Description This command will display the cu rrent IP multicast interface table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 40 MD5 C ONFIGURA TION C OMM ANDS The MD5 configuration comm ands in the Comm and Line Interface (C LI) are listed (along with the appropriate parameters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#config md5 key 1 taboo Command: config md5 key 1 taboo Success. DES-6500:4# delete md5 key Purpose Used to delete an entry in the MD5 key table. Syntax delete md5 key <key_id 1-255> Description This command is used to delet e a specific entry in the MD5 key table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 41 OSPF C ONFIGURA TION C OMM ANDS The OSPF configuration comma nds in the Command Line Interface (C LI) are listed (along with the appropriate param eters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Command Parameters show ospf all create ospf virtual_link <area_id> <nei ghbor_id> {hello_interval <sec 1-65535> | .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#enable ospf Command: enable ospf Success. DES-6500:4# disable ospf Purpose Used to disable OSPF on the Switch. Syntax disable ospf Description This command, in combination with the enable ospf command above, is used to enable and disable OSPF on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To show OSPF state: DES-6500:4#show ospf Command: show ospf --------------- ------ ----------------------- ----------------- 10.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create ospf area Purpose Used to configure OSPF area settings. Syntax create ospf area <area_id> type [normal | stub {stub_summary [enabled | disabled] | metric <v alue 0- 65535>}] Description This command is used to create an OSPF area and configure its settings.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config ospf area Purpose Used to configure an OSPF area’s settings. Syntax config ospf area <area_id> type [normal | stub {stub_summary [enabled | disabled] | metric <v alue 0- 65535>}] Description This command is used to configure an OSPF area’s settings.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create ospf host_route Purpose Used to configure OSPF host route settings. Syntax create ospf host_route <ipaddr> {area <area_id> | metric <value 1-65535>} Description This command is used to c onfigure the OSPF host route settings.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config ospf host_route Used to configure OSPF host route settings. Syntax config ospf host_route <ipaddr> {area <area_id> | metric <value>} Description This command is used to c onfigure an OSPF host route settings.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create ospf aggregation Purpose Used to configure OSPF area aggregation settings. Syntax create ospf aggregation <area_id> <netw ork_address> lsdb_type summary {advertise [enabled | disabled]} Description This command is used to create an OSPF area aggregation.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#delete ospf aggregation 10. 1.1.1 10.48.76.122/16 lsdb_type summary Command: delete ospf aggregation 10.1.1.1 10.48.76..122/16 lsdb_type summary Success. DES-6500:4# config ospf aggregation Purpose Used to configure t he OSPF area aggregation settings.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Usage Example Command: show ospf aggregation DES-6500:4# To display OSPF area aggregation settings: DES-6500:4#show ospf aggregation .
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show ospf lsdb Command: show ospf lsdb Area LSDB Advertisi ng Link State Cost Sequence ID Type Router ID ID Number ----------- -------------- ------------------ ------------------ ------- ----------------- 0.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual show ospf virtual_neighbor Parameters <area_id> − A 32-bit number in the form of an IP address (xxx.xxx.xxx.xxx) that uniquely identifies the OSPF area in the OSPF domain. <neighbor_id> − The OSPF router ID for the neighbor.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config ospf ipif metric <value 1-65535 > − The interface metric (1 to 65535). Entering a 0 will allow automatic calculation of the metric. authentication – Enter the type of authent ication preferred.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config ospf all interval between the transmission of OSPF Hello packets, in seconds. Between 1 and 65535 seconds can be specified. The Hello Interval, Dead Interval, Aut horization Type, and Authorization Key should be the same for all routers on the same network.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual To display the current OSPF interface settings, for a specific OSPF interface: DES-6500:4#show ospf ipif ipif2 Command: show ospf ipif ipif2 Interface Name: ipif2 IP Address: 123.234.12.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual create ospf virtual_link Purpose Used to create an OSPF virtual interface. Syntax create ospf virtual_link <area_id> <neighb.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config ospf virtual_link Purpose Used to configure the O SPF virtual interface settings.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual delete ospf virtual_link Purpose Used to delete an OSPF virtual interface. Syntax delete ospf virtual_link <area_id> <neighbor_id> Description This command will delete an OSPF virtual interface from the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual DES-6500:4#show ospf virtual_link Command: show ospf virtual_link Virtual Interface Configuration Transit Virtual Hello Dead Authenti.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 43 J UMBO F RAM E C OMM ANDS Certain switches can support jum bo frames (fram es larger than the standard Ethernet frame size of 1518 bytes).
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Example usage: To enable the jumbo fram e function on the Switc h: DES-6500:4#disable jumbo_frame Command: disable jumbo_frame Success. DES-6500:4# show jumbo_frame Purpose Used to show the status of the jumbo frame function on the Switch.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 45 C OMM AND H ISTOR Y L IST The command history list com mands in the Co mm and Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config authen_application CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All Example usage: To display the parameters for a s.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual config command_history Purpose Used to configure the command history. Syntax config command_history <v alue 1-40> Description This command is used to configure the command history.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual A T ECHNICAL S PECIFICA TIONS Physical and Environmental AC inputs & External Redundant Pow er Supply 100 - 240 VAC, 50/60 Hz (in.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual Performance Transmission Method Store-and-forward-L3 Routing RAM Buffer 256 MB per Linecard, 256MB on CPU Card. Filtering Address Table 16 K MAC addresses per device 3K IP addresses per device Packet Filtering/ Forw arding Rate Full-wire speed for all connections.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual General Standard IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.1D Spanning Tree IEEE 802.1w Rapid Spanning Tree IEEE 802.1s Multiple Spanning Tree IEEE 802.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch CLI Manual 331.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il D-Link TM DES-6500 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del D-Link TM DES-6500 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso D-Link TM DES-6500 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul D-Link TM DES-6500 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il D-Link TM DES-6500, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del D-Link TM DES-6500.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il D-Link TM DES-6500. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo D-Link TM DES-6500 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
