Manuale d’uso / di manutenzione del prodotto P772 del fabbricante CTX
Vai alla pagina of 24
User's Manual P772 LCD Monitor.
i ♦♦♦ Federal Communications Commission (F.C.C.) Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ii ♦♦♦ Congratulations! The display you have just purchased carries the TCO'03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world.
♦♦♦ 1 English TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .............................................................. 2 INTRODUCTION ............................................................................................... 3 Product Description .
♦♦♦ 2 English IMPORTANT SAFETY INSTRUCTIONS Please read the following instructions carefully. This manual should be retained for future reference. 1. To clean the LCD Monitor screen make sure the Monitor is in the power off mode. Unplug the Monitor from its power source before cleaning it.
♦♦♦ 3 English INTRODUCTION LCD Monitor Power Cord Product Description Congratulations on purchasing this new generation monitor. Your LCD monitor incorporates high quality display into a small light-weight module. It has power-saving capabilities and emits no X-ray radiation.
♦♦♦ 4 English Installation of the Monitor Arm CAUTION 1. The Monitor Arm is an optional item. 2. The Arm Mounting Device must be VESA Flat Physical Mounting Interface Standard.
♦♦♦ 5 English INTRODUCTION Recommended Use of the Monitor • Power – Use the type of power indicated on the marking label. • Plugs – Do not remove any of the prongs of the monitor's three-pronged power plug. – Disconnect the power plug from the AC outlet if you are not going to use it for an indefinite period of time.
♦♦♦ 6 English LCD Monitor Base Installation Guide 1 . First attach the back cover to the monitor. Carefully match up the three hinges at the top of the cover with the three corresponding slots; slide and lock into place. 3. Using a flathead screwdriver, insert the screws and tighten in the direction indicated.
♦♦♦ 7 English INTRODUCTION Guidelines for Operating the Viewing Angle of LCD Monitor 1. Height Adjustment You can adjust the height of the monitor by securely holding the base with one hand and pulling up the monitor stand with the other. The height of the monitor can be be adjusted from 383.
♦♦♦ 8 English CONTROLS AND ADJUSTMENTS Once you have installed this monitor with your system, please read the instructions in this section, they give you some guidelines on how to use the monitor more efficiently. And lead you through the various functions of the user controls and explain how to adjust the monitor to your personal preference.
♦♦♦ 9 English CONTROLS AND ADJUSTMENTS On Screen Display (OSD) Main menu (VGA) 1. Press " ↵ ↵ ↵ ↵ ↵ " to open the OSD main menu. 2. Use the " ∇ " and " ∆ " buttons to move through the displayed functions.
♦♦♦ 10 English CONTROLS AND ADJUSTMENTS 2. Auto-Tune Here are some items which can be adjusted as below, please press " ↵ " to enter the item menu. ADVANCED AUTO TUNE PATTERN PROGRAM USAGE GUIDE • AUTO_TUNE.exe is used for Windows the display mode adjustment.
♦♦♦ 11 English CONTROLS AND ADJUSTMENTS 3. Color You can choose either the 6500°k, 9300°K color temperature mode, User mode or Motion Picture to store your user defined color settings. • User Mode a. Press " ↵ " button to enter User mode.
♦♦♦ 12 English 4. Image Here are some items which can be adjusted as below, please press " ↵ " to enter the item menu. • Clock: Press the " ∇ " or " ∆ " button to adjust the width of the screen. • Phase: Press the " ∇ " or " ∆ " button to reduce the noise on the screen.
♦♦♦ 13 English 7. OSD Setting To adjust the OSD position. • H - Position: Press the " ∇ " or " ∆ " button to reposition the OSD window to the right or left. • V - Position: Press the" ∇ " button to move the OSD window downwards and " ∆ " to move it upwards.
♦♦♦ 14 English CONTROLS AND ADJUSTMENTS On Screen Display (OSD) Main menu (DVI) 1. Press " ↵ ↵ ↵ ↵ ↵ " to open the OSD main menu. 2. Use the " ∇ " and " ∆ " buttons to move through the displayed functions.
♦♦♦ 15 English CONTROLS AND ADJUSTMENTS 4. Image Press " ↵ " to enter the item menu. • Smooth: Press the " ∇ " or " ∆ " button to select "ON" or "OFF" to enable or disable smooth. The "Smooth" function key will perform only under the resolution range 1280 x 1024.
♦♦♦ 16 English CONTROLS AND ADJUSTMENTS 8. Reset • Press the " ∇ " or " ∆ " button to select "Yes" or "No". • Choose Reset to call-back all the settings for the current Input Signal mode to factory preset.
♦♦♦ 17 English CONTROLS AND ADJUSTMENTS Power Consumption (120/230 Vac) Energy Declaration This monitor is equipped with a function for saving energy, which supports the VESA Display Power Management Signaling (DPMS) standard. This means that the monitor must be connected to a computer.
♦♦♦ 18 English TROUBLESHOOTING Troubleshooting If you are experiencing trouble with the LCD display refer to the following. If the problem persists please contact your local dealer or our service center. The monitor does not respond after you turn on the system.
♦♦♦ 19 English 1 11 5 10 16 6 TECHNICAL INFORMATION Compatibility This LCD monitor supports multiple operating platforms such as IBM compatible computers. This section provides you with detailed information on pin assignment of the D-Sub connector and the preset timing chart of the prevailing video standards.
♦♦♦ 20 English DV I Connector Pin Assignment (DVI) DVI Modes R es o lu tio n V C L K( MH z ) H ori zont a l Frequency(KHz) V ertical Fr equenc y(Hz) St a ndar d 640*480 25. 175 31. 469 59.940 IBM VG A 800*600 40. 000 37. 879 60.000 VESA 1024*768 65.
♦♦♦ 21 English TECHNICAL INFORMATION Specifications Note : Specifications are subject to change without notice LCD Panel 17" TFT LCD module with wide-viewing angle, 0.294 (H)x0.294(V)mm pixel [Monitor] Effective display size 17" (43.2cm diagonal) Resolution (max.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il CTX P772 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del CTX P772 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso CTX P772 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul CTX P772 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il CTX P772, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del CTX P772.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il CTX P772. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo CTX P772 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
