Manuale d’uso / di manutenzione del prodotto 973.11424 del fabbricante Craftsman
Vai alla pagina of 18
Operator's Manual T in., 14.4 VOLT CORDLESS DRILL-DRIV Variable Speed / Reversible Model No. 973.114240 Save this manual for future reference ,_ WARNING" To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
B Warranty ............................................................................................................................................................. 2 B Introduction .................................................................
A& WARNING! READ AND UNDERSTAND ALL | INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/ or serious personal injury. SAVE THESE iNSTRUCTiONS WORK AREA [] Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
[] Use only accessories that are recommended by SERVICE the manufacturer for your model. Accessories that may be suitable for one tool may create a risk of in- jury when used on another tool. Keep the tool and its hand(e dry, clean and free from oil and grease.
,_ WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/ or serious personal injury, • Before using battery charger,.
Some of the following symbols may be used on this tool. Please study them andlearn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.
SPECIFICATIONS Chuck Capacity Motor Charger Rating No Load Speed 3/8 in. 14.4 Volts DC 120 Volts, 60 HZ, AC Only 0 - 600/min. Switch Charge Rate Maximum Torque Variable Speed - Reversible 3 - 6 Hours 100 in.
PACKINGLIST 3/8 in. (10 mm) Right Angle Drill Charger Battery Pack (2) Screwdriver Bits (2) Operator's Manual Case WARNING: If any parts are missing do not operate the tool until the missing parts are re- placed. Failure to do so could result in possible serious personal injury.
SWITCH LOCK See Figure 2. The switch trigger can be locked in the OFF position. This feature can be used to prevent thepossibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector in center position.
KEYLESS CHUCK See Figure 5. Your drill has a keyless chuck. Asthe name implies, you can hand tighten or release drill bits inthe chuck jaws. Grasp and hold the collar of the chuck withone hand.
REMOVING BITS See Figure 7. [] Lock switch trigger or your drill by placing the direction of rotation selector in center position. See Figure 2. [] Loosen the chuck jaws from drillbit. [] To loosen: grasp andhold the collar of the chuck with one hand, while rotating chuck body with your other hand.
DRILLING See Figure 11. CHUCK REMOVAL See Figures 12, 13, and 14. The chuck must be removed in order to use some accessories. To remove: [] Lock switch trigger or your drill by placing the direction of rotation selector in center position. See Figure 2.
CHUCK REMOVAL (Continued) [] Insert hex key wrench in chuck and tighten chuck jaws securely. Tap sharply with a mallet in a counterclockwise direction. This will loosen chuck on the spindle. It can now be unscrewed by hand. See Figure 14. TO RETIGHTEN A LOOSE CHUCK The chuck may become loose on spindle and develop a wobble.
_ ARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. Do not abuse power tools.
The following recommended accessories are currently available at Sears Retail Stores. [] 6-Pc. Extra Length Magnite Power Bit Set [] 30-Pc. Power Screwdriver/Nutdriver Setand Case [] 17-Pc. Power Screwdriver/Nutdriver Setand Case _ WARNING: The use of attachments oraccessories not listed might be hazardous.
CRAFTSMAN 3/8 in., 14.4 VOLT CORDLESS DRILL-DRIVER- MODEL NO. 973.114240 The model numberwill be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your 3/8 in., CORDLESS DRILL-DRIVER orwhen ordering repair parts.
Your Home For repair-in your home-of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner's manuals that you need to do-it-yourself.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Craftsman 973.11424 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Craftsman 973.11424 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Craftsman 973.11424 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Craftsman 973.11424 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Craftsman 973.11424, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Craftsman 973.11424.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Craftsman 973.11424. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Craftsman 973.11424 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
