Manuale d’uso / di manutenzione del prodotto 917.377422 del fabbricante Craftsman
Vai alla pagina of 18
Owner's Manual CRAFTSMAN 6.5 HORSEPOWER 22" EZ MULCH POWER PROPELLED ROTARY LAWN MOWER Model No. 917.377422 • Safety • Assembly • Operation • Maintenance • Espa_ol • Repair Parts CAUTION: Read and follow all Safety Rules and Instructions before operating this equipment Seam, Roebuck and Co.
Warranty 2 Product Specifications 10 Safety Rules 2 Service and Adjustments 13 Assembly 4 Storage 14 Operation 5 Troubleshooting 15 Maintenance Schedule 9 Repair Parts 33 Maintenance 9 Parts Ordering .
• Dross properly. Do not operate mower when barefoot or wearing open sandals. Wear only solid shoes with good traction when mowing. • Check fuel tank before starting engine. Do not fill gas tank indoors, when the engine is running or when the engine is hot.
These accessories wereavailable when this lawn mower was produced. They are also available at most Sears retail outlets and service centers. Most Sears stores can also order repair parts for you, when you provide the model number of your lawn mower. Some of these accessories may not apply to your lawn mower.
• Your lawn mower handle can be adjusted for your mowing comfort. Refer to "Adjust Handle" in the Service and Adjustment section of this manual. Operator presence control bar Upper handle __Liftu_; u.up n'n °,nW;ir KNOW YOUR LAWN MOWER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR LAWN MOWER.
The operation of any lawn mower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your lawn mower or performing any adjust- ments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses.
BEFORE STARTING ENGINE OIL Your lawn mower is shipped wi_out oil in the engine. • Be sure mower is level and area around oil fill is dean. • Remove engine cq] cap and fill to the full line on the dipstick. • Use 20 ozs. of oil. For type and grade of oil to use, see _NGINE" in Maintenance section of this manual.
MULCHING MOWING TIPS IMPORTANT: Forbest performance, keep mower housing free ofbuilt-up grass and trash. See "Cleaning" in MAINTENANCE section of this manual • The special mulching blade w.
Check for Loose Fasteners _ I I/ Clean/Inspect Grass Catcher M Clean Lawn Mower _V Clean Under Drive Cover IPower-Propened Mowers) _/ RE Check drive belt/pulleys (Power-Propellad Mowers) b/ Check/Sharpen/Replace Blade it/3 Lubrication Chart _ f_ .
PRODUCT SPECIFICATIONS MODEL NUMBER 917.377422 SERIAL NUMBER DATE OF PURCHASE HORSEPOWER: 6.5 DISPLACEMENT: GASOLINE CAPACITY/"I'YPE: 11.5 CU. IN, 1.25 QUARTS UNLEADED REGULAR OIL TYPE (API-SF/SG/SH): SAE 30 (ABOVE 32°1 =) SAE 5W-30 (BELOW 32"F) OIL CAPACITY: 20 OZS.
IMPORTANT: Blade bolt is grade 8 heat treated. TO SHARPEN BLADE NOTE: We do not recommend sharpening blade - but if you do, be sure the blade is balanced. Care should be taken to keep the blade balanced. An unbalanced blade will cause eventual damage to lawn mower or engine.
TO CHANGE ENGINE OIL NOTE: Before tipping lawn mower to drain oil, drain fuel tank by running engine until fuel tank is empty. • Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug. • Remove engine oil cap; lay aside on a clean surface.
ACAUTION: Before performing any service and adjustments: • Release control bar and stop engine. • Make sure the blade and all moving parts have completely stopped. • Disconnect spark plug wire from spark plug and place where it cannot come in contact with plug.
• To change from medium low to high position only the upper handle section will have to be tumed over. • To change from medium low to low position, only the lower handle section will have to be turned over. Lower handle Squeeze to Handle bracket remove Hairpin cotter ENGINE ENGINE SPEED Your engine speed has been factory set.
ENGINE FUEL SYSTEM IMPORTANT: Itis important to prevent gum deposits from forming in essential fuel system parts such as carburetor, fuel filter, fuel hose, or tank during storage.
PROBLEM Loss of power TROUBLESHOOTING CHART CAUSE • Rear of lawn mower housing or cutting blade dragging in heavy grass. • Cutting too much grass, Poor cut - uneven Excessive vibrat'mn Starter rope hard to pull Grass catcher not filling ('d so equipped) Hard to push • Dirty air filter.
.
For the repair or replacement parts you need delivered directly to your home Call 7 am - 7 pro, 7 days a week 1-800-366-PART (1-800-366-7278) Para ordenar piezas con entrega a domicilio - 1-800-659-70.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Craftsman 917.377422 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Craftsman 917.377422 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Craftsman 917.377422 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Craftsman 917.377422 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Craftsman 917.377422, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Craftsman 917.377422.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Craftsman 917.377422. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Craftsman 917.377422 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
