Manuale d’uso / di manutenzione del prodotto 517212-001 del fabbricante Compaq
Vai alla pagina of 26
Printed in Upgrading and Ser vicing Guide.
.
Removing and Replacing the Hard Disk Drive Features may var y by model..
.
517212-001 — Removing and Replacing the Hard Disk Drive 3 Removing and Replacing the Hard Disk Drive 20 to 40 minutes Before Y ou Begin After you replace the hard disk drive, you have to perfor m a system recover y . Refer to the documentation that came with your computer for deta iled system recover y steps.
4 517212-001 — Removing and Replacing the Hard Disk Drive Removing the Hard Disk Drive 1 Remove all removable media such as CDs or DVDs from the computer . 2 T urn off the computer using the shutdown procedure for your operating system. 3 Disconnect the power from the wall and from the back of the computer .
517212-001 — Removing and Replacing the Hard Disk Drive 5 9 Release the two latching tabs on the left side of the front bezel by pulling them slightly outward. When the left side of the front bezel is released, pull it away from the computer . 10 Spread a towel or soft cloth on your working surface.
6 517212-001 — Removing and Replacing the Hard Disk Drive 15 Remove the two hard drive retention screws. Set them aside for use with the new hard drive. 16 Slide the hard drive to the rear of the computer until it stops. Then slide the hard drive toward the center of the computer to release it.
517212-001 — Removing and Replacing the Hard Disk Drive 7 Replacing the Hard Disk Drive 1 Remove the two guide screws from the old hard drive. 2 Install the guide screws into the new hard drive.
8 517212-001 — Removing and Replacing the Hard Disk Drive 4 Place the drive so the guide screws fit into the guide screw slots. The drive manufacturer’ s label should be visible when the drive is in place. 5 Push the hard drive back in to the bay and then to the right until it locks.
517212-001 — Removing and Replacing the Hard Disk Drive 9 8 Insert the tabs at the rear of the optical drive and cage assembly into the slots at the rear of the computer . Then lower the front of the drive and cage assembly onto the computer . 9 Replace the two optical drive cage screws.
10 517212-001 — Removing and Replacing the Hard Disk Drive 13 Align the tabs on the inside edge of the left side panel with the slots in the edge of the left side of the computer case. 14 Slide the left side panel into place. 15 Replace the screws that secure the side panel to the computer .
517212-001 — Removing and Replacing the Hard Disk Drive 11.
12 517212-001 — Removing and Replacing the Hard Disk Drive.
Removing and Replacing the Optical Disc Drive Features may var y by model..
.
517212-001 — Removing and Replacing the Optical Disc Drive 13 Removing and Replacing the Optical Disc Drive 15 to 25 minutes Before Y ou Begin Obser ve the following requirements before removing and replacing an optical disc (CD/DVD) drive. T ools Needed Flathead screwdriver Hewlett-Packard recommends using a magnetic tipped screwdriver .
14 517212-001 — Removing and Replacing the Optical Disc Drive Removing the Optical Disc Drive 1 Remove all removable media such as CDs or DVDs from the computer . 2 T urn off the computer using the shutdown procedure for your operating system. 3 Disconnect the power from the wall and from the back of the computer .
517212-001 — Removing and Replacing the Optical Disc Drive 15 9 Release the two latching tabs on the left side of the front bezel by pulling them slightly outward. When the left side of the front bezel is released, pull it away from the computer . 10 Spread a towel or soft cloth on your working surface.
16 517212-001 — Removing and Replacing the Optical Disc Drive 14 Remove the four screws (two on each side) that hold the optical drive in the drive cage. 15 Remove the drive cage from the drive. Replacing the Optical Disc Drive 1 Place the drive cage onto the drive.
517212-001 — Removing and Replacing the Optical Disc Drive 17 3 Replace the four drive cage screws. 4 Reconnect the power cable and data cable to the optical drive. 5 Insert the tabs at the rear of the optical drive and cage assembly into the slots at the rear of the computer .
18 517212-001 — Removing and Replacing the Optical Disc Drive 9 Snap the left side of the bezel in place. 10 Align the tabs on the inside edge of the left side panel with the slots in the edge of the left side of the computer case. 11 Slide the left side panel into place.
.
.
.
Copyright © 2009 Hewlett-Packar d Development Company , L.P . The information contained herein is subject to change without notice. Ve r s i o n : 2 .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Compaq 517212-001 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Compaq 517212-001 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Compaq 517212-001 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Compaq 517212-001 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Compaq 517212-001, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Compaq 517212-001.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Compaq 517212-001. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Compaq 517212-001 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.