Manuale d’uso / di manutenzione del prodotto DVD-958 del fabbricante COBY electronic
Vai alla pagina of 22
DVD 5.1 HOME THEA TER SYSTEM DVD-958.
Features & Package Contents.........................................................2 For your Attention........................................................................3-4 Panel..............................................................
Thank you for purchasing our product. Please read this manual carefully before connection and operation and keep it for future reference. This DVD player is a next generation home player that can produce high quality video and audio for your continued enjoyment.
For Y our Attention -3- IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings.
FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Panel -5- REAR P ANEL: FRONT P ANEL: FRONT P ANEL: 1 1 2 2 3 3 4 4 5 5 7 7 6 6 12 12 11 11 1. SPEAKER OUTPUT 2. LINE INPUT 3. HDMI OUTPUT 4. S-VIDEO OUTPUT 5. 2-CH AUDIO OUTPUT 6. COMPONENT VIDEO OUTPUT 10 10 7. COAXIAL DIGIT AL AUDIO OUTPUT 8. SD/MS/MMC CARD PORT 9.
1 VIDEO SYSTEM CONNECTION Connections The following video outputs are available for this unit . 1.1 Composite Video Use the cable with yellow plug of an A V cable to connect the composite video output of this unit to the video input of a TV/monitor. 1.
2-CH AUDIO OUTPUT LINE1 IN LINE2 IN L1 L1 R1 R1 L L R R L2 L2 R2 R2 L L R R Connections -7- Use a pair of cables (red for right /white for left) to connect the stereo audio output of this unit to other stereo audio input. audio The audio settings should conform to the practical audio system connections.
1. In DVD mode, press [SETUP] on the remote control to display the setup menu. 2. Press [ ]/[ ] to select an item. The submenu of the selected item will be displayed below instantly . 3. Press [ ]/[ ] to select an item you desire to set in the submenu, then press [ENTER] /[ ]to enter.
1.6 LAST MEMORY ON: Each time you turn off the unit or stop the disc, it will memorize the last play time. Next time you turn on the unit and play the same disc, the unit will play from that memorized point. OFF: Disable the last memory function. 2 AUDIO SETUP P AGE There are eight items in the AUDIO SETUP PAGE.
System Setup -10- 2.2.2 LPCM OUTPUT When DIGITAL OUTPUT is set to PCM ONL Y , this item is available. Select a sample rating for the analog audio output. There are two options, 48KHz and 96KHz. NOTE: Some amplifiers don't support 96KHz sampling which will af fect the coaxial output.
System Setup -1 1- 2.5.3 SUPER BASS Set it to ON to get the super bass sound effect. 2.5.4 TREBLE BOOST Set it to ON to boost the treble sound. 2.6 3D PROCESSING 2.6.1 PRO LOGIC II Pro Logic II: This unit allows you to configure Dolby Pro Logic II to expand 2-channel source audio into full 5.
3 VIDEO SETUP PAGE There are five items in the VIDEO SETUP PAGE. They are VIDEO OUTPUT , TV MODE, HD MODE, COLOR SETTING, and HDMI SETUP . 3.1 VIDEO OUTPUT OFF: Set video output to the CVBS (composite video). YUV: Set video output in analog component video format when the component video outputs are used.
System Setup 4 PREFERENCE PAGE 3.5 HDMI SETUP About HDMI HDMI (High-Definition Multimedia Interface) is the newest interface for audiovisual equipment such as high-definition television and home theater systems. With 19 wires wrapped in a single cable that resembles a USB wire, HDMI is able to carry a bandwidth of 5 Gbps (gigabits per second).
NTSC : If the connected TV is NTSC system which is used in T aiwan, America and Canada, etc, select this mode. It will change the video signal of a P AL disc and output in NTSC format. PAL : If the connected TV is P AL system which is used in China, Hongkong and Europe, etc, select this mode.
Remote Control Install two AAA/1.5V batteries into the remote control. Point the remote control at the remote sensor on the front panel. The remote control works within about 8 metres from the sensor and within an angle of about 30 degrees from the left and right side.
ENTER 1 4 7 2 5 8 0/10 3 6 9 10+ Remote Control Function -16- GOTO Press to enter an item in the menu or to confirm and execute a selection. The direction keys can be used to move the highlight in the menu. Press to open /close the disc tray. OPEN/CLOSE STANDBY SETUP Press to switch on the unit.
-17- Press repeatedly to switch the repeat modes. (Note: This function is invalid when the PBC function is activated.) DVD: CHAPTER(chapter repeat) TITLE(title repeat) ALL(repeat all) (cancel repeat) .
-18- Press to switch the viewing angles. (Note: This function only works with the discs encoded with multiple camera angles.) ANGLE V-MODE Press repeatedly to switch the video output modes between CVBS (OFF) and YUV . Press repeatedly to switch the audio output modes between 5.
JPEG PICTURE PLA YBACK MP3 PLA YBACK Place a JPEG picture CD in the disc tray , then the unit will load the disc automatically. Press [ ] to enter the thumbnail mode to preview the pictures. In the thumbnail mode, use the direction keys to select a picture, then press [ENTER] to start the playback from the selected picture.
-20- Troubleshooting Symptom Cause(s) Remedy No Power The AC power cord is not connected to the power supply or is not connected to a power supply securely . Please check that the AC power cord is connected securely. Picture There is no picture or the picture is distorted.
Specifications Power supply AC ~110-120V/6 0Hz Working environment Temperature -10~+40 Relative humidity 5%~90% TV System PAL/NTSC Frequency Range 20Hz~20KHz THD+NOISE -60dB(1KHz) WOW FLUTTER Below the limit of apparatus measure 522 KHz~1620KHz S/N(A weight) 70dB( ) 1KHz FM band Range 87.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il COBY electronic DVD-958 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del COBY electronic DVD-958 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso COBY electronic DVD-958 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul COBY electronic DVD-958 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il COBY electronic DVD-958, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del COBY electronic DVD-958.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il COBY electronic DVD-958. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo COBY electronic DVD-958 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
