Manuale d’uso / di manutenzione del prodotto S20 del fabbricante Clarke
Vai alla pagina of 110
Form No. 70899A 4/06 Clarke ® Printed in the U.S.A. U.S. Patent No. 6,105,192; No. 6,557,207; No. 6,760,947 and other Patents Pending This book has important information for the use and safe operation of this machine.
Page -2- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN Table of Contents SECTION II - Parts and Service Manual Final Assembly ............................................................................................................
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -3- EN OPERA T OR SAFETY INSTRUCTIONS WARNING AVERTISSEMENT ADVERTENCIA D A N G E R : Failure to read and observe all DANGER statements could result in severe bodily injury or death. Read and observe all DANGER statements found in the Operator's Manual and on the machine.
Page -4- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN WARNING: Maintenance and repairs performed by unauthorized personnel could result in damage or injury.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -5- EN Model FOCUS S17 Rotary Machine Power Supply 24 Volt D.C., (2) 12V 130AH Wet 24 Volt D.C., (2) 12V 130AH Wet or (2) 12V 100AH Gel Deep Cycle Batteries or (2) 12V 100AH Gel Deep Cycle Batteries Pad or Brush 3-Lug Driver Style 3-Lug Driver Style Traverse Brush Assist 1/3 HP (0.
Page -6- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN Model FOCUS S20 Rotary Machine Power Supply 24 Volt D.C., (2) 12V 130AH Wet 24 Volt D.C., (2) 12V 130AH Wet or (2) 12V 100AH Gel Deep Cycle Batteries or (2) 12V 100AH Gel Deep Cycle Batteries Pad or Brush 3-Lug Driver Style 3-Lug Driver Style Traverse Brush Assist 1/3 HP (0.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -7- EN Procedures For Transporting How to Put the Machine Into a Van or Truck WARNING: This machine is heavy. Get assistance before attempting to transport or move it. Use two able persons to move the machine on a ramp or incline.
Page -8- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN 11. Fasten the machine to the vehicle. Clarke recommends a strap over the top of the machine and a strap to keep the machine from rolling forward or backwards. If this is not done, there is a possibility of the machine toppling over.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -9- EN AC Power Indicator SYMBOLS USED ON FOCUS S17/S20 & L17/L20 Solution Control Brush Up/Down Vacuum/Squeegee Control Warning Po.
Page -10- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN Machine Control Panel Figure 3 Reverse Switch (See Figure 3, Item "H") On Traverse "L" Models Only - The reverse switch, when used in conjunction with one of the forward/reverse switches, causes the machine to reverse directions.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -11- EN Machine Control Panel Circuit Breakers (Figure 3, Items "L", "M", "N", "O", "P" & "Q" The circuit breaker reset buttons are located on the lower control handle.
Page -12- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN Figure 8 The FOCUS 17/20 machines use two 12-volt batteries. The batteries are located in the battery compartment under the recovery tank. It is recommended to remove the recovery tank when installing the batteries.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -13- EN 9. Place the batteries in the compartment shown in Figure 11. WARNING: The batteries are heavy. Lifting batteries without help could result in an injury. Get help to lift the batter- ies.
Page -14- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN Battery Maintenance The electrical power to operate the machine comes from the storage batteries. Storage batteries need preventa- tive maintenance. To maintain the batteries in good condition, follow these instructions.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -15- EN How To Prepare the Machine For Operation Figure 16 Figure 17 How To Charge The Batteries WARNING: Charging the batteries in an area without adequate ventilation could result in an explosion.
Page -16- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN • Absorption Stage - In the absorption stage the red and green light will be illuminated on the charger (See Figure 17). During this stage the charger maintains constant voltage and lets the batteries absorb the charge at their own rate.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -17- EN How To Remove Rotary Brush or Pad Driver (if equipped) To remove the brush or pad driver from the machine, follow this procedure: 1. Turn the key switch clockwise ("L" models only).
Page -18- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN How To Operate The Machine Figure 25 Figure 26 Figure 27 How To Operate The Squeegee The squeegee wipes the floor while the vacuum motor removes the dirty solution from the floor.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -19- EN 5 . When either the left or right forward/reverse switches (figure 28, item A) are pushed in, the machine will go forward ("L" models only). 6 . Control the speed of traverse by using the traverse speed control knob ("L" models only) (figure 28, Item C).
Page -20- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN To pre-wet brushes you should first turn the speed knob to the lowest traverse setting on the "L" model.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -21- EN 5. Make sure the valve on the recovery drain hose is clean. Tightly close the valve. 6. Make sure the brush/pad is in position and installed correctly. 7. Make sure brush housing and skirts are in position on the brush head.
Page -22- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN 7. On machines with cylindrical brush head, the debris tray needs to be emptied regularly to prevent overflow. To remove the debris tray from the machine follow this procedure (See Figure 35).
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -23- EN NOTE: Always turn machine off before servicing machine. WARNING: Always wear eye protection and protective clothing when working near batteries. NO SMOKING! WARNING: Before raising or removing the recovery tank, be sure tank is empty.
Page -24- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN Maintenance REAR BLADE 0.06 (1.5 mm) Figure 37 Figure 38 Figure 39 Maintenance For The Squeegee To remove the squeegee, follow this procedure: 1. Remove the squeegee assembly by loosening the two knobs that attach the squeegee to the machine.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -25- EN Clarke FOCUS 17/20 Accessories A CCESSORIES Description Part No. Clarke Care Kit 1 4 60 7A 29" Squeegee Assembly 1 8 82 0A.
Page -26- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 EN There is no solution flow . The solution flow does not stop. The machine does not remove all the water from the floor. The batteries do not give the normal running time. Fill the solution tank.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -27- EN PROBLEM CAUSE ACTION The cleaning is not even. The scrub brush or pad is worn. There is damage to the brush assembly, caster or the solution valve. The brush motor is not running The solution level is low.
Page -28- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES Índice Listado de piezas .............................................................................................................. ................. 83 Ensamblado del depósito de recuperación .
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -29- ES INSTRUCCIONES DE SEGURID AD P ARA EL OPERADOR ¡PELIGRO!: Si n o s i gue las instrucciones que siguen a la palabra PELIGRO, se pueden causar lesiones graves, incluso mortales. Lea y siga todas las indicaciones de PELIGRO que se encuentran en este manual y en la máquina.
Page -30- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES ¡AVISO!: El mantenimiento y las reparaciones llevados a cabo por personal no autorizado pueden provocar daños o lesiones. El mantenimiento y las reparaciones deben ser realizadas únicamente por personal autorizado.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -31- ES Modelo Focus S17 rotativo Alimentación de la máquina Alimentación de 24 Voltios C.
Page -32- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES Modelo Focus S20 rotativo Alimentación de la máquina Alimentación de 24 Voltios C.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -33- ES Cómo colocar la máquina en un camión o una camioneta ¡AVISO!: Esta máquina pesa. No intente transportarla o desplazarla sin la ayuda de otra persona. Se necesitan dos personas para desplazarla sobre una rampa de carga.
Page -34- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES 11. Estibe la máquina en el vehículo. Clarke recomienda poner una correa alrededor de la parte superior de la máquina y otra para impedir que la máquina se resbale hacia adelante o hacia atrás.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -35- ES SÍMBOLOS UTILIZADOS EN FOCUS S17/S20 y L17/L20 Control de la solución Cepillo arriba/abajo Control de la escobilla de goma/as.
Page -36- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES MANDOS Figura 3 I nterruptor de marcha atrás (figura 3, H) Sólo para el mode L autoarrastrado Cuando utilice simultáneamente el interruptor de marcha atrás y uno de los interruptores de tracción, puede echar la máquina hacia atrás.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -37- ES MANDOS Interruptores automáticos (Figura 3, Ítems "L", "M", "N", "O", "P" & "Q") Los botones de reactivación de los interruptores automáticos se encuentran ubicados sobre la palanca de control inferior.
Page -38- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES Figura 8 Las máquinas Focus 17 y 20 usan dos baterías de 12 voltios. Las baterías están ubicadas en el compartimento de baterías debajo del depósito de recuperación. Se recomienda sacar el depósito de recuperación al instalar las baterías.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -39- ES 9. Coloque las baterías en el compartimento que se muestra en la Figura 11. ¡AVISO!: Las baterías pesan. No las levante solo: se podría lesionar. Levante las baterías con la ayuda de otra per- sona.
Page -40- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES Mantenimiento de las baterías Las baterías con acumuladores proporcionan la alimenta- ción eléctrica necesaria para el funcionamiento de la máquina. Las baterías de acumuladores necesitan un mantenimiento preventivo.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -41- ES PREPARACIÓN DE LA MÁQUINA PARA TRABAJAR Figura 16 Figura 17 Procedimiento para cargar las baterías ¡AVISO!: Si carga las baterías en un local que no está suficientemente ventilado, corre el riesgo de causar una explosión.
Page -42- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES • Etapa de absorción - En la etapa de absorción, se iluminan las luces roja y verde del cargador (Refiérase a la Figura 17). Durante esta etapa, el cargador mantiene un voltaje constante y deja que las baterías absorban la carga a su propio régimen.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -43- ES Cómo sacar el accionamiento de cepillos o discos rotativos (en caso de disponer de ese equipamiento) Para quitar el accionamiento de cepillos o discos de la máquina, el procedimiento es el siguiente: 1 .
Page -44- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES C Funcionamiento de la bayeta La bayeta rasca el suelo mientras el motor de aspiración aspira la solución de agua sucia. Baje o levante la empuñadura de mando de la bayeta con la mano derecha.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -45- ES 5. Pulse el botón izquierdo o el botón derecho (sólo en los modelos "L"), véase figura 28 , para avanzar la máquina. 6. Ponga el selector en la velocidad deseada (sólo en los modelos "L") ( f i gura 27).
Page -46- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES Para humedecer previamente los cepillos gire en primer lugar la perilla de velocidades a la marca de tracción más baja en los modelos "L".
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -47- ES 5. Compruebe que la válvula de las mangueras de vaciado está limpia y ciérreia cuidadosamente. 6. Compruebe que los cepillo/disco estén en la posición apropiada e instalados correctamente.
Page -48- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES 7. En las máquinas con cabezal de cepillo cilíndrico, es necesario vaciar regularmente la cubeta de residuos para evitar desbordes. Para sacar la cubeta de residuos, siga este procedimiento (Refiérase a la Figura 35).
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -49- ES MANTENIMIENTO NOTA: Siempre apague la máquina antes de realizar el servicio de mantenimiento de la misma. ¡AVISO!: Lleve siempre gafas y ropas de protección cuando trabaja cerca de las baterías.
Page -50- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES MANTENIMIENTO Mantenimiento de la bayeta Para desmontar la bayeta, siga el procedimiento siguiente: 1. Afloje las dos manecillas de fijación del conjunto de la bayeta y luego desmóntelo.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -51- ES Clarke Focus 17 y 20 Accesorios A CCESORIOS Descripción N° Pieza Juego de mantenimiento Clarke 1 4 6 0 7 A Conjunto de la bay.
Page -52- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 ES La solución no se derrama El flujo de solución no para La máquina no aspira toda el agua del suelo Las baterías se descarga.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -53- ES PROBLEMA CAUSA SOLUCIÓN La limpieza no es uniforme La máquina no funciona Perdida de potencia El interruptor principal a llav.
Page -54- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR Table des matières Liste des pièces ............................................................................................................... ................. 8 3 Assemblage du réservoir de récupération .
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -55- FR INSTRUCTIONS POUR LA SÉCURITÉ DE L'OPÉRA TEUR D A N G E R : Le non-respect des consignes précédées du mot DANGER peut occasionner des blessures graves, voire entraîner la mort.
Page -56- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR AVERTISSEMENT : Seul du personnel qualifié, agréé par Clarke, a le droit d'effectuer les réparations et l'entretien de nos machines. L'entretien et les réparations doivent être réalisés par un membre autorisé du personnel uniquement.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -57- FR Modèle Focus S17 Rotative Alimentation 24 Volts CC, (2) batteries à cycle prolongé 12V 24 Volts CC, (2) batteries 12V 130AH .
Page -58- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR Modèle Focus S20 Rotative Alimentation 24 Volts CC, (2) batteries à cycle prolongé 12V 24 Volts CC, (2) batteries 12V 130AH .
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -59- FR Transport de la machine Comment placer la machine dans un camion ou une camionnette AVERTISSEMENT: Cette machine est lourde. N'essayez pas de la transporter ou de la déplacer sans aide.
Page -60- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR 11. Arrimez la machine au véhicule Clarke Technology recommande de placer une courroie autour de la partie supérieure de la machine et une autre pour empêcher la machine de glisser vers l'avant ou vers l'arrière.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -61- FR SYMBOLES UTILISÉS POUR S17 et L17 Commande de la solution Position haute/basse de la brosse Contrôle Aspirateur/Racle Avertis.
Page -62- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR Commandes Figure 3 Interrupteur de marche arrière (figure 3, H) Modèle autotracté "L" uniquement La commande de marche arrière utilisée avec l'un des commutateurs AV/AR permet à la machine de changer de direction.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -63- FR Commandes Coupe-circuits (Figure 3, Articles « L », « M », « N », « O », « P » & « Q ») Les boutons de réinitialisation des coupe-circuits sont placés sur la poignée de commande inférieure.
Page -64- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR Figure 8 Les machines Focus 17/20 utilisent des batteries de 12 volts. Les batteries se trouvent dans le compartiment à batteries, au-dessous du réservoir de récupération.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -65- FR 9. Placez les batteries dans le compartiment indiqué à la Figure 11. AVERTISSEMENT: Les batteries sont lourdes. Il existe un risque de blessure si vous soulevez les batteries sans aide.
Page -66- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR Entretien des batteries Les batteries à accumulateurs fournissent l'alimentation électrique nécessaire au fonctionnement de la machine. Un entretien préventif est nécessaire pour ce type de batteries.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -67- FR Préparation de la machine avant la mise en service Figure 16 Figure 17 Procédure de charge des batteries AVERTISSEMENT: Si vous chargez les batteries dans un local insuffisamment ventilé, vous risquez de provoquer une explosion.
Page -68- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR • Étape d'Absorption - À l'étape d'absorption, les voyants rouge et vert seront illuminés sur le chargeur (Voir Figure 17). Pendant cette étape, le chargeur maintient une tension constante et laisse les batteries absorber la charge à leur vitesse propre.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -69- FR Dépose de la brosse rotatrice ou du porte-disque (s'ils sont installés) Pour retirer la brosse ou le porte-disque de la machine, respectez la procédure suivante : 1.
Page -70- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR Fonctionnement du suceur Le suceur racle le sol tandis que le moteur d'aspiration aspire la solution d'eau sale. Abaissez ou relevez la poignée de commande du suceur à la main.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -71- FR 4. Relevez le suceur. 5. Lorsque l'un des interrupteurs gauche ou droit AV/AR (figure 28, A) est enclenché, la machine se déplace vers l'avant ("L" models only).
Page -72- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR Pour pré-humidifier les brosses, vous devrez tout d'abord tourner le bouton de vitesse au réglage de translation le plus bas sur le modèle « L ».
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -73- FR 5. Vérifiez que la vannes du flexible de vidange est propre et refermez-la soigneusement. 6. Vérifiez que les brosses/disques sont en bonne posi- tion et correctement installés.
Page -74- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR 7 . Sur les machines avec une tête de brossage cylindrique, le bac à débris devra peut-être être vidé régulièrement pour empêcher un débordement. Pour retirer le bac à débris de la machine, respectez la procédure suivante (Voir Figure 35).
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -75- FR Entretien N.B. : Éteignez toujours la machine avant de réaliser un entretien. AVERTISSEMENT: Portez toujours des lunettes et vêtements de protection lorsque vous travaillez sur/près des batteries.
Page -76- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR Entretien (suite) Entretien du suceur Pour déposer le suceur, procédez comme suit : 1. Desserrez les deux manettes de fixation de l'ensemble du suceur puis déposez celui-ci.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -77- FR Clarke Focus 17/20 Accessoires A CCESSORIES Descripción Part No. Kit d'entretien Clarke 1 4 60 7A Ensemble du suceur (29 .
Page -78- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 FR La solution ne s'écoule pas. . Le flux de solution ne s'arrête pas La machine n'aspire pas toute l'eau du sol. Les batteries se déchargent prématurément.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -79- FR PROBLÈME CAUSE SOLUTION Le nettoyage n'est pas uniforme. La brosse de récurage ou le disque sont usés. L'ensemble de la brosse, la roulette ou la vanne de solution sont endommagés.
Page -80- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II NOTE S.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -81- SECTION II S 17/L17 Rotar y S17/L17 Cylindrical S20/L20 Rotar y Section II Part s and Service Manual (70899A) U.
Page -82- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II 1 2 3 4 5 6 7 2 8 9 10 11 12 2 3 13 14 12 Clarke ® FOCUS S17/20, L17/20 and L17 Cyl.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -83- SECTION II Ref. # Part No. Description Qt y 1 Page 84 Recovery Tank Assembly 1 2 980651 Washer, Flat 5/16" 8 3 80212A Screw, M8 x 1.25 x 35mm Hex Head 4 4 Page 86 Solution Tank Assembly 1 5 Page 100 Rotary Disk Head Assembly Option 1 6 Page 98 Cyl.
Page -84- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS S17/20, L17/20 and L17 Cyl. Recovery Tank Assembly 1/05 1 2 3 4 5 6 6A 6B 6C 7 8 9 10 11 12 13 14 15 14.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -85- SECTION II Clarke ® FOCUS S17/20, L17/20 and L17 Cyl. Recovery Tank Parts List 1/05 Ref. # Part No. Description Q t y 1 80176A Screw, M5 x .8 x 12mm Pan Head 1 2 30207A Recovery Lid 1 3 30065A Lid Gasket 1 4 692409 Chain 1 5 80196A Nut, M5 x .
Page -86- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS S17/20, L17/20 and L17 Cyl. Solution Tank & Front Cover Assembly 1/05 1 3 4 5 6 7 2 6 2 7 8 9 12 2 .
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -87- SECTION II Ref. # Part No. Description Q t y 1 80199A Nut, M6 x 1 Hex Nylock 2 2 980614 Lock Washer, 1/4" Ext.
Page -88- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS S17/20, L17/20 and L17 Cyl. Electrical Assembly 1/05 1 2 3 4 5 6 2 1 7 8 9 10 11 12 13 14 15 16 17 18 1.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -89- SECTION II Clarke ® FOCUS S17/20, L17/20 and L17 Cyl. Electrical Parts List 1/05 Ref. # Part No. Description Q t y Qt y S17/20 L17/20 1 80179A Screw, M6 x 1 x 15mm, Pan Head 6 6 2 980614 Washer, Lock 1/4" Ext.
Page -90- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS S17/20, L17/20 and L17 Cyl. Control Housing Assembly 1/05 1 3 4 5 6 7 8 9 10 11 12 13 15 17 16 18 19 20.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -91- SECTION II Clarke ® FOCUS S17/20, L17/20 and L17 Cyl. Control Housing Parts List 1/05 Qty Qty Q t y Ref.
Page -92- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS S17/20, L17/20 and L17 Cyl. Squeegee Lift Assembly 1/05 1 2 3 4 5 6 7 8 9 10 11 12 13 5 14 15 16 11 17 .
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -93- SECTION II Ref. # Part No. Description Q ty 1 80196A Nut, M5 x .8, Nylock 1 2 87036A W asher, Flat #10 1 3 61305A Tube Bracket 1 4 80199A Nut, M6 x 1, Nylock 2 5 80198A Nut, M8 x 1.
Page -94- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS S17/20, L17/20 and L17 Cyl. 32" Squeegee Assembly 1/05 1 2 21 21 3 4 5 4 5 20 19 18 7 8 17 21 9 10.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -95- SECTION II Clarke ® FOCUS S17/20, L17/20 and L17 Cyl. 32" Squeegee Parts List 1/05 Ref.
Page -96- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS S17/20, L17/20 and L17 Cyl. Frame Assembly 4/06 1 2 3 4 5 7 8 9 10 11 2 1 13 12 10 11 14 12 15 2 17 1 1.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -97- SECTION II Clarke ® FOCUS S17/20, L17/20 and L17 Cyl. Frame Parts List 4/06 Qty Qty Qty Qty Qty Ref. # Part No. Description S17 L17 L17 Cyl S 2 0 L 2 0 1 80199A Nut, M6 x 1, Nylock 5 6 6 5 6 2 87026A Washer, Flat 1/4" SS 7 1 7 1 7 7 1 7 3 80204A Nut, M3 x .
Page -98- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS L17 Cylindrical Cylindrical Head Assembly 1/05 1 2 3 4 5 3 6 7 7 6 8 9 4 5 3 59 11 12 13 14 15 16 17 18.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -99- SECTION II Clarke ® FOCUS L17 Cylindrical Cylindrical Head Parts List 1/05 Ref. # Part No.
Page -100- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS S17/20 & L17/20 Rotary Rotary Disk Head Assembly 1/05 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -101- SECTION II Clarke ® FOCUS S17/20 & L17/20 Rotary Rotary Disk Head Parts List 1/05 Ref.
Page -102- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS S17/20 & L17/20 Rotary Gearbox Assembly and Parts List 1/05 Ref # Part No.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -103- SECTION II Item Part No. Description Qty 1 56478A Stator Frame Assembly (w/Magnets & Clips) 1 2 50142A Arm ature Assembly (w. B.E. & F.E. Bearings) 1 3 902654 Bearings B.E.
Page -104- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS L17/L20 & L17 Cylindrical Transaxle Drawing 1/05 BLK RED 1 2 3 4, 5 6 Item Part No.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -105- SECTION II Clarke ® FOCUS S17/20 Connection Diagram 1/05 BLK RED RED YEL.
Page -106- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS S17/20 Electrical Schematic 1/05.
Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 Page -107- SECTION II Clarke ® FOCUS L17/20 Connection Diagram 1/05 RED YEL BLK RED.
Page -108- Clarke ® Operator's Manual -FOCUS S17/L17 and S20/L20 SECTION II Clarke ® FOCUS L17/20 Electrical Schematic 1/05.
CLARKE PRODUCT SUPPORT BRANCHES PRODUCTION F ACILITIES AL T O Danmark A/S, Aalborg Blytaekkervej 2 DK-9000 Aalborg +45 72 18 21 00 AL T O Danmark A/S, Hadsund Industrikvarteret DK-9560 Hadsund +45 72 .
Clarke ® LIMITED U.S. W ARRANTY This Clarke Industrial/Commercial Product is warranted to be free from defects in materials and workmanship under normal use and service, when operated and maintained in accordance with Clarke's Maintenance and Operations instructions.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Clarke S20 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Clarke S20 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Clarke S20 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Clarke S20 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Clarke S20, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Clarke S20.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Clarke S20. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Clarke S20 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.