Manuale d’uso / di manutenzione del prodotto MS2106 del fabbricante Clarion
Vai alla pagina of 16
MS2106 MS2106 owner 7-14.qxd 7/14/2003 1:42 PM Page 1.
2 CONTENTS 1. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2. Ungo-Net Interface Introduction . . . . . . . . . . . . . . . . . . . . . . . 2 3. Remote Transmitter . . . . . . . . . . . . . . . . . . . .
3 1. FE ATURES Ungo Security Systems are state-of-the-art vehicle protection systems equipped with features designed to: Deter potential intrusions to the vehicle by continually flashing the system LED status indicator while the system is Armed, giving a visual indication to any passer-by that the vehicle is equipped with a security system.
4 1. Ungo-Net Interface Introduction This product is equipped with Ungo’s newest and most revolutionary technology to date, the Ungo-Net bus system. Ungo-Net is a network system that allows expansion, flexibilit y , and superior vehicle security through digital communication.
5 3. REMOTE TRANSMITTER 3.1 Remote Transmitter Layout The Ungo MS2106 comes with 2 Random Code Remote Transmitters used to control the system’s features. Each time a transmitter button is pressed, the LED will flash to indicate that a transmission is taking place.
6 3. SYSTEM OPER ATION 3.1 Arming Operation T o arm the alarm system, press Lock button on the transmitter: • The siren will chirp once. • The parking lights will flash once.* • The doors will lock.* • The LED will come on solid for 5 seconds, and then begin to flash.
7 3.5 Tamper Alert On Disarming, if the system responds with three chirps, indicating the system was triggered, turn on the ignition and the LED will flash the triggered zone 5 cycles.
8 3.10 Remote Panic Feature In the event of an emergency ( PANIC) situation, the system's siren can be triggered for 45 seconds to attract attention. T o activate the Panic feature, press and hold the Lock button for 3 seconds. • The siren will sound.
9 3.12 Valet Mode When placed into Valet Mode the security system will be disabled. However, the optional keyless entry and auxiliary outputs will still function if installed. T o enter the Valet Mode: 1. Be sure the alarm system is disarmed. 2. Press and hold the Valet/Override button.
10 3. Press the Lock button on the transmitter. • The siren will chirp once. 4. Press the Lock button on the transmitter again. • The siren will chirp twice. 5. Repeat steps 3 and 4 for each additional transmitter. 6. Turn OFF the ignition when transmitter programming is complete.
11 4. User Selectable Programming Options The Ungo MS2106 features a user selectable programming table allowing simple adjustments to match the user’s preferences. User Programming Options Table 4.1 User Programmable Options 1. Arming Mode: Selects whether or not the system will automatically Arm when ignition is turned off.
12 7. Remote Start in Valet Mode: Selects whether or not the remote start can be activated when the security system is in Valet mode. (Requires optional Ungo- Net remote start module.) 8. Automatic Starting: Selects whether or not the Ungo-Net start module can be programmed for automatic starting.
13 BUTTON Lock Unlock Trunk Lock Lock then Lock DUR ATION Short Short Long (3 Seconds) Long (3 Seconds) Short then Short FUNCTION Arm Disarm Auxiliary 1 Output Panic Remote Sensor Bypass Reference Charts 3.
14 6. WARRANTY INFORM ATION This Ungo Security System is warranted against defects in material and workmanship. The main unit and remote controls are covered by this limited lifetime warrant y. This Limited Lifetime Warranty applies to Ungo Security systems that have been installed by an authorized Ungo Security dealer.
15 7. INS TALLATION INFORM ATION Date of Installation: Installation Facility: Facility Address: Facility Phone Number: Location of Valet/Override: NOTES MS2106 owner 7-14.
Clarion Corporation of America 661 W. Redondo Beach Blvd. Gardena, CA 90247 www.clarion.com 97-MS2106-10 Re v. 1 (8/03) Ungo Security Corporation, Gardena, CA MS2106 owner 7-14.
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Clarion MS2106 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Clarion MS2106 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Clarion MS2106 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Clarion MS2106 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Clarion MS2106, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Clarion MS2106.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Clarion MS2106. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Clarion MS2106 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
