Manuale d’uso / di manutenzione del prodotto SDX 11500 del fabbricante Citrix Systems
Vai alla pagina of 14
Citrix NetScaler 10 Quick Start Guide: SDX 1 1500/13500/14500/16500/18500/20500 Platform Citrix NetScaler 10.
Copyright and T rademark Notice Copyright © 2013 Citrix Systems, Inc. All rights reserved. NO P AR T OF THIS DOCUMENT MA Y BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS OR USED TO MAKE DERIV A TIVE WORK (SUCH AS TRANSLA TION, TRANSFORMA TION, OR ADAPT A TION) WITHOUT THE EXPRESS WRITTEN PERMISSION OF CITRIX SYSTEMS, INC.
Quick Installation and Configuration W elcome to the Citrix NetScaler Application Delivery product line. Please review the following information before proceeding with installation of the SDX appliance.
Figure 1-1. Citrix NetScaler SDX 11500/13500/14500/16500/18500/20500 appliance, front panel The following figure shows the back panel of the SDX 11500/13500/14500/16500/18500/20500 appliance.
w R oot password: The root user (nsroot) has full administrative privileges on the appliance. The root password is used to authenticate the root user . The default root password is nsroot. Y ou can change this password during initial configuration of the appliance.
w Allow the power supply units and hard drives to cool before touching them. w Install the equipment near an electrical outlet for easy access. w Mount equipment in a rack with sufficient airflow for safe operation.
Connecting a NetScaler SDX Appliance to the Network Connect the interfaces on the appliance to the network ports on the appropriate switches by using Ethernet/fiber optic cables. Figure 1-4. Connecting a Citrix NetScaler SDX appliance to the network W arning: Connecting multiple network ports to the same switch or VLAN can result in a network loop.
Note: Electrical Safety Precautions Caution: During installation or maintenance procedures, wear a grounding wrist strap to avoid ESD damage to the electronics of the appliance. Use a conductive wrist strap attached to a good earth ground or to the appliance.
Initial Configuration through the Management Service User Interface T o set up the appliance by using the Management Service user interface, connect a workstation or laptop to the same network as the appliance. T o configure the NetScaler SDX appliance by using the Management Service user interface 1.
Note: After changing the network configuration, close all browser instances and open a new browser instance to access the appliance. Initial Configuration through the Serial Console T o perform initial configuration of the SDX appliance from outside the L2 domain, connect to the console port of the appliance and follow the instructions carefully .
Changing the Password of the Default User Account The default user account provides complete access to all features of the Citrix NetScaler SDX appliance. Therefore, to preserve security , the nsroot account should be used only when necessary , and only individuals whose duties require full access should know the password for the nsroot account.
4. In the P assword box, type nsroot . 5. In the Configur ation tab, click Network and type values for the following parameters: • IP Address—IP address of the LOM port. • Subnet Mask—Subnet mask used to define the subnet of the LOM port. • Default Gateway—IP address of the router that connects the LOM port to the network.
Specifications SDX 11500/13500/14500/16500/18500/205 00 Number of power supplies 2 AC power supply input voltage, frequency , and current 100-240 V AC 50-60 Hz 6.5-3.5 A Maximum power consumption 650 W Heat dissipation 2200 BTU per hour W eight 46 lbs Height 2U Width EIA 310-D for 19-inch racks Depth 28 in or 71.
2. Click the Documentation tab. 3. T o view a short description of each document, hover your cursor over the title. T o open a document, click the title. T o contact Citrix Support, call 1-800-4-CITRIX (1-800-424-8749), or log on to MyCitrix at http://www .
Un punto importante, dopo l’acquisto del dispositivo (o anche prima di acquisto) è quello di leggere il manuale. Dobbiamo farlo per diversi motivi semplici:
Se non hai ancora comprato il Citrix Systems SDX 11500 è un buon momento per familiarizzare con i dati di base del prodotto. Prime consultare le pagine iniziali del manuale d’uso, che si trova al di sopra. Dovresti trovare lì i dati tecnici più importanti del Citrix Systems SDX 11500 - in questo modo è possibile verificare se l’apparecchio soddisfa le tue esigenze. Esplorando le pagine segenti del manuali d’uso Citrix Systems SDX 11500 imparerai tutte le caratteristiche del prodotto e le informazioni sul suo funzionamento. Le informazioni sul Citrix Systems SDX 11500 ti aiuteranno sicuramente a prendere una decisione relativa all’acquisto.
In una situazione in cui hai già il Citrix Systems SDX 11500, ma non hai ancora letto il manuale d’uso, dovresti farlo per le ragioni sopra descritte. Saprai quindi se hai correttamente usato le funzioni disponibili, e se hai commesso errori che possono ridurre la durata di vita del Citrix Systems SDX 11500.
Tuttavia, uno dei ruoli più importanti per l’utente svolti dal manuale d’uso è quello di aiutare a risolvere i problemi con il Citrix Systems SDX 11500. Quasi sempre, ci troverai Troubleshooting, cioè i guasti più frequenti e malfunzionamenti del dispositivo Citrix Systems SDX 11500 insieme con le istruzioni su come risolverli. Anche se non si riesci a risolvere il problema, il manuale d’uso ti mostrerà il percorso di ulteriori procedimenti – il contatto con il centro servizio clienti o il servizio più vicino.
